Escolar Documentos
Profissional Documentos
Cultura Documentos
RA41214EN30GLA0
UE State Handling
RA41214EN30GLA0
UE State Handling
RA41214EN30GLA0
UE State Handling
RA41214EN30GLA0
UE State Handling
RA41214EN30GLA0
UE State Handling
RA41214EN30GLA0
UE State Handling
RA41214EN30GLA0
UE State Handling
RA41214EN30GLA0
10
UE State Handling
RA41214EN30GLA0
11
UE State Handling
RA41214EN30GLA0
12
UE State Handling
RA41214EN30GLA0
13
UE State Handling
RA41214EN30GLA0
14
UE State Handling
RA41214EN30GLA0
15
UE State Handling
RA41214EN30GLA0
16
UE State Handling
RA41214EN30GLA0
17
UE State Handling
RA41214EN30GLA0
18
UE State Handling
DRX is not disabled for Release 9 UEs that do not benefit from battery consumption
optimization. DRX is disabled in this case if:
The parameter drxApplyDeviceType is set to True (This parameter determines
whether the device type noBenFromBatConsumpOpt of the UE is considered for
DRX configuration. Such an UE does not foresee to particularly benefit from NWbased battery consumption optimization)
The UE capabilities for E-UTRA contain the device type noBenFromBatConsumpOpt
RA41214EN30GLA0
19
UE State Handling
RA41214EN30GLA0
20
UE State Handling
RA41214EN30GLA0
21
UE State Handling
RA41214EN30GLA0
22
UE State Handling
Note that HARQ retransmissions are planned outside of the DRX cycle
to allow for a tighter DRX optimization without having to plan for the
worst case retransmission.
The DRX retransmission timer is defined so that the UE does not have
to wait for a full DRX cycle for an expected retransmission that has
been lost due to either ACK/NACK misinterpretation or PDCCH failed
detection
RA41214EN30GLA0
23
UE State Handling
RA41214EN30GLA0
24
UE State Handling
RA41214EN30GLA0
25
UE State Handling
Extended settings for the long DRX cycle require UL out-of-synch handling
UEs cant be kept time aligned any more
TA estimation is based on periodic CQI reporting if there is no UL
traffic;
For long DRX cycle settings and during phases of data transmission,
UE has to be kept in active time continuously, realized by restricting
the DRX Inactivity timer accordingly
If phase of data transmission ends, TA to UE is stopped, and UE
goes UL out-of-sync
UE releases dedicated resources on PUCCH and for SRS
Re-synchronization via RA procedure due to UL or DL data arrival
and re-configuration of dedicated resources must be supported.
Transition to uplink In-Sync
DL data transmission trigger
The eNodeB initiates a random access procedure for UEs which are in uplink Out-ofSync and have data for downlink transmission. The eNodeB provides in this case the
RACH parameters via the PDCCH order to the UE.
UL data transmission trigger
During the UL Out-of-Sync state, UE may start a contention based random access
procedure in order to transmit data on uplink
Following the transition to In-Sync, UEs are reconfigured with any resources
released during UL Out-of-Sync transition (resources on PUCCH and for SRS, if
applicable).
RA41214EN30GLA0
26
UE State Handling
RA41214EN30GLA0
27
UE State Handling
RA41214EN30GLA0
28
UE State Handling
RA41214EN30GLA0
29
UE State Handling
RA41214EN30GLA0
30
UE State Handling
RA41214EN30GLA0
31
UE State Handling
RA41214EN30GLA0
32