Você está na página 1de 14

Marine

Propulsion

3126
224 bkW @ 2800 rpm
300 bhp @ 2800 rpm

SPECIFICATIONS
I-6, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant

Shown with
Accessory Equipment

Bore mm (in). . . . . . . . . . . . . . . . . . . . . . . . . . . 110 (4.33)


Strokemm (in) . . . . . . . . . . . . . . . . . . . . . . . . . . 127 (5.0)
DisplacementL (cu in). . . . . . . . . . . . . . . . . . . . 7.2 (442)
Rotation (from flywheel end). . . . . . . Counterclockwise
Compression Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.5:1
Capacity for Liquids L (U.S. gal)
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . 28 (7.4)
Lube Oil System (refill) . . . . . . . . . . . . . . . . . . . 25 (6.6)
Oil Change Interval hrs . . . . . . . . . . . . . . . . . . . . . . 250
Caterpillar DEO 10W30 or 15W40
Engine Weight, Net Dry
(approx) kg (lb) . . . . . . . . . . . . . . . . . . . . . 722 (1,592)

STANDARD ENGINE EQUIPMENT


Air Inlet System
12V air inlet heater, sea water aftercooler, air
cleaner/fumes disposal, turbocharger
Charging System
12V, 51 amp charging alternator
Control System
mechanical governor, forward facing throttle
control
Cooling System
thermostats and housing, belt-driven centrifugal
jacket water pump, gear-driven auxiliary sea water
pump, expansion tank, marine gear oil cooler,
engine mounted heat exchanger with removable
copper-nickel tube bundle, auxiliary sea water lines

Fuel System
RH or LH service filter, fuel transfer pump
Instrumentation
magnetic pickup tachometer drive, wiring harness
includes junction box, mounting and hardware, 12V
oil pressure and water temperature sender group
(single station)
Lube System
crankcase breather, gear-driven engine oil pump,
RH or LH service oil filter, oil filler, oil level gauge,
pan drain, lubricating oil
Protection System
12V energized-to-run solenoid shutoff, alarm
contactor

Exhaust System
watercooled exhaust manifold and turbocharger,
fumes disposal

Starting System
12V rear-facing electric starting motor, 12V junction
box

Flywheel and Flywheel Housing


SAE No. 3 flywheel (126 teeth) and SAE No. 3
flywheel housing, SAE standard rotation

General
vibration damper and guard, Caterpillar yellow
paint, lifting eyes

Power produced at the flywheel will be within standard tolerances up to 50C (122F)
combustion air temperature measured at the air cleaner inlet, and fuel temperature up to
52C (125F) measured at the fuel filter base. Power rated in accordance with NMMA
procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft power.

3126 MARINE PROPULSION 224 bkW (300 bhp)


PERFORMANCE CURVES
E Rating DM4953-00

IMO Compliant
350

250
59.2

14

150

Fuel Rate L/hr

Power - bkW

45
40
4
35

100

30
25

Power - bhp

50

250

13

200

12
11
4

Fuel Rate - g/hr

200

15.6
15

300

55

10
9

150

100

50

20

50
15

0
1000

4
3

P
10

1400

1800
2200
2600
Engine Speed - rpm

224 bkW

3000

SI Metric

0
1000

Fuel
Rate
L/h

1800
2200
2600
Engine Speed - rpm

300 bhp

3000

English

Performance Data
Engine Engine BSFC
Speed Power
g/
rpm
bkW bkW-h

1400

Performance Data

Boost Intake
Exh
Exh
Press
Air
Manif
Gas
kPa
Flow Temp
Flow
o
Gauge m3 /min
C m3 /min

Engine Engine BSFC


Speed Power
lb/
rpm
bhp
bhp-h

Fuel
Rate
gph

Boost Intake
Press
Air
in.Hg. Flow
Gauge cfm

Exh
Manif
Temp
o
F

Exh
Gas
Flow
cfm

Max
2800
Limit
2600
Curve: 4 2400
2200
2000
1800
1600
1400
1200
1120

224.0
224.0
212.5
190.5
166.1
140.5
115.2
90.6
68.1
59.8

222
214
207
202
201
203
206
209
207
203

59.2
57.0
52.5
46.0
39.8
34.0
28.3
22.6
16.8
14.5

218.3
210.3
189.5
155.8
119.5
85.0
56.4
32.2
19.4
13.3

24.4
22.7
20.2
16.8
13.3
10.2
7.8
5.8
4.5
3.9

483
475
465
457
468
486
506
514
465
442

49.0
46.0
41.6
35.3
28.9
23.3
18.8
14.1
10.5
8.7

Max
2800
Limit
2600
Curve: 4 2400
2200
2000
1800
1600
1400
1200
1120

300
300
285
255
223
188
154
121
91
80

.364
.351
.340
.333
.331
.334
.339
.343
.340
.333

15.6
15.1
13.9
12.2
10.5
9.0
7.5
6.0
4.4
3.8

64.6
62.3
56.1
46.1
35.4
25.2
16.7
9.5
5.7
3.9

861
801
713
593
469
360
275
205
159
138

901
887
869
854
874
907
942
957
870
827

1729
1623
1468
1246
1020
822
663
498
371
307

Max
2800
Power
2600
Curve: M 2400
2200
2000
1800
1600
1400
1200
1120

224.0
224.0
224.0
221.0
211.0
198.0
178.0
154.0
111.0
94.0

222
214
207
201
198
218
297
382
391
337

59.2
57.0
55.2
52.9
49.9
51.4
63.1
70.1
51.7
37.7

218.3
210.3
201.1
189.2
168.4
143.3
150.9
210.7
121.8
78.3

24.4
22.7
20.9
18.6
16.0
13.5
15.6
24.0
14.8
9.8

483
475
480
489
507
544
596
651
620
606

49.0
46.0
43.4
39.7
35.0
31.6
40.0
62.7
38.9
25.8

Max
2800
Power
2600
Curve: M 2400
2200
2000
1800
1600
1400
1200
1120

300
300
300
296
283
266
239
207
149
126

.364
.351
.340
.330
.326
.358
.489
.628
.643
.554

15.6
15.1
14.6
14.0
13.2
13.6
16.7
18.5
13.7
10.0

64.6
62.3
59.6
56.0
49.9
42.4
44.7
62.4
36.1
23.2

861
801
738
656
565
476
550
847
522
346

901
887
895
913
944
1011
1105
1203
1147
1124

1729
1623
1531
1401
1235
1115
1412
2213
1373
910

Prop
2800
Demand 2600
Curve: P 2400
2200
2100
2000
1800
1600
1400
1200
1120

224.0
179.3
141.1
108.7
94.5
81.6
59.5
41.8
28.0
17.6
14.3

222
215
212
212
213
215
221
233
250
270
279

59.2
46.0
35.7
27.5
24.0
20.9
15.7
11.6
8.3
5.7
4.8

218.3
168.4
118.7
78.0
61.4
46.6
24.3
12.0
5.0
0.4
1.9

24.4
20.0
15.6
12.0
10.4
9.0
6.8
5.4
4.6
3.5
3.0

483
429
401
382
372
361
331
292
248
212
199

49.0
38.9
30.3
23.2
20.2
17.4
12.8
9.7
7.6
5.5
4.6

Prop
2800
Demand 2600
Curve: P 2400
2200
2100
2000
1800
1600
1400
1200
1120

300
240
189
146
127
109
80
56
38
24
19

.364
.354
.349
.349
.350
.353
.364
.384
.411
.444
.459

15.6
12.2
9.4
7.3
6.3
5.5
4.1
3.1
2.2
1.5
1.3

64.6
49.9
35.2
23.1
18.2
13.8
7.2
3.6
1.5
0.1
0.6

861
706
550
423
367
318
240
191
162
124
106

901
804
754
720
701
681
628
557
479
413
389

1729
1373
1069
819
713
614
452
342
268
194
162

Brake Mean Effective .....................................................................................


Pressure
1326 kPa

Brake Mean Effective .....................................................................................


Pressure
192 psi

3126 MARINE PROPULSION 224 bkW (300 bhp)


DIMENSIONS

RATING DEFINITIONS AND CONDITIONS


E RATING Planing hull vessels such as
pleasure craft, harbor patrol, harbor master, and
some fishing and pilot boats.
897 mm
35.3 in

1184 mm
46.6 in

937 mm
36.9 in

RATINGS are based on SAE J1228/ISO8665


standard conditions of 100 kPa (29.61 in. Hg),
25C (77F), and 30% relative humidity. These
ratings also apply at ISO3046/1, DIN6271/3, and
BS5514 conditions of 100 kPa (29.61 in. Hg),
27C (81F), and 60% relative humidity. Ratings
are valid for air cleaner inlet temperatures up to
and including 50C (122F) and for sea water
temperatures up to and including 42C (108F) at
sea level.
FUEL RATES are based on fuel oil of 35 API
[16C (60F)] gravity having an LHV of
42 780 kJ/kg (18,390 Btu/lb) when used at
29C (85F) and weighing 838.9 g/liter
(7.001 lbs/U.S. gal). Fuel consumption shown
with all oil, fuel, and water pumps, engine
driven. For a without pumps condition, deduct
approximately 0.5% for each pump not engine
driven.
Additional ratings may be available for specific
customer requirements. Consult your Caterpillar
representative for additional information.

3126 MARINE PROPULSION 224 bkW (300 bhp)

Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes
of comparison with other manufacturers engines. Actual engine performance may vary according to the particular application of the engine and
operating conditions beyond Caterpillars control.
TMI Reference No.: DM4953-00 (4-23-01)
Materials and specifications are subject to change without notice.
LEHM1456 (4-01)

Printed in U.S.A.

The International System of Units (SI) is used in this publication.


2001 Caterpillar
All rights reserved.

Marine
Propulsion

3126
261 bkW @ 2800 rpm
350 bhp @ 2800 rpm

SPECIFICATIONS
I-6, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant

Shown with
Accessory Equipment

Bore mm (in). . . . . . . . . . . . . . . . . . . . . . . . . . . 110 (4.33)


Strokemm (in) . . . . . . . . . . . . . . . . . . . . . . . . . . 127 (5.0)
DisplacementL (cu in). . . . . . . . . . . . . . . . . . . . 7.2 (442)
Rotation (from flywheel end). . . . . . . Counterclockwise
Compression Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.5:1
Capacity for Liquids L (U.S. gal)
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . 28 (7.4)
Lube Oil System (refill) . . . . . . . . . . . . . . . . . . . 25 (6.6)
Oil Change Interval hrs . . . . . . . . . . . . . . . . . . . . . . 250
Caterpillar DEO 10W30 or 15W40
Engine Weight, Net Dry
(approx) kg (lb) . . . . . . . . . . . . . . . . . . . . . 722 (1,592)

STANDARD ENGINE EQUIPMENT


Air Inlet System
12V air inlet heater, sea water aftercooler, air
cleaner/fumes disposal, turbocharger
Charging System
12V, 51 amp charging alternator
Control System
mechanical governor, forward facing throttle
control
Cooling System
thermostats and housing, belt-driven centrifugal
jacket water pump, gear-driven auxiliary sea water
pump, expansion tank, marine gear oil cooler,
engine mounted heat exchanger with removable
copper-nickel tube bundle, auxiliary sea water lines

Fuel System
RH or LH service filter, fuel transfer pump
Instrumentation
magnetic pickup tachometer drive, wiring harness
includes junction box, mounting and hardware, 12V
oil pressure and water temperature sender group
(single station)
Lube System
crankcase breather, gear-driven engine oil pump,
RH or LH service oil filter, oil filler, oil level gauge,
pan drain, lubricating oil
Protection System
12V energized-to-run solenoid shutoff, alarm
contactor

Exhaust System
watercooled exhaust manifold and turbocharger,
fumes disposal

Starting System
12V rear-facing electric starting motor, 12V junction
box

Flywheel and Flywheel Housing


SAE No. 3 flywheel (126 teeth) and SAE No. 3
flywheel housing, SAE standard rotation

General
vibration damper and guard, Caterpillar yellow
paint, lifting eyes

Power produced at the flywheel will be within standard tolerances up to 50C (122F)
combustion air temperature measured at the air cleaner inlet, and fuel temperature up to
52C (125F) measured at the fuel filter base. Power rated in accordance with NMMA
procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft power.

3126 MARINE PROPULSION 261 bkW (350 bhp)


PERFORMANCE CURVES
E Rating DM4952-00

IMO Compliant

300

400
68.0

350

60

300

18.0

250

150

40

100

250
12

200

10

150

30

Fuel Rate - g/hr

Fuel Rate L/hr

50

Power - bhp

14

200
Power - bkW

16

100
6

50

20

50
10

0
1000

1400

1800
2200
2600
Engine Speed - rpm

261 bkW

3000

SI Metric

0
1000

Fuel
Rate
L/h

1800
2200
2600
Engine Speed - rpm

350 bhp

3000

English

Performance Data
Engine Engine BSFC
Speed Power
g/
rpm
bkW bkW-h

1400

Performance Data

Boost Intake
Exh
Exh
Press
Air
Manif
Gas
kPa
Flow Temp
Flow
o
Gauge m3 /min
C m3 /min

Engine Engine BSFC


Speed Power
lb/
rpm
bhp
bhp-h

Fuel
Rate
gph

Boost Intake
Press
Air
in.Hg. Flow
Gauge cfm

Exh
Manif
Temp
o
F

Exh
Gas
Flow
cfm

Max
2800
Limit
2600
Curve: 4 2400
2200
2000
1800
1600
1400
1200
1120

261.0
261.0
247.3
221.6
193.2
163.5
134.0
105.5
79.2
69.6

218
214
209
203
200
200
203
208
211
210

67.9
66.7
61.6
53.7
46.0
39.0
32.4
26.1
19.9
17.4

187.8
180.7
171.5
157.4
138.0
104.9
67.5
40.5
24.7
17.2

22.1
20.9
19.2
16.9
14.4
11.3
8.3
5.9
4.6
3.7

573
575
557
525
504
517
557
572
526
502

52.6
50.5
45.8
39.2
32.9
26.9
21.0
15.6
11.6
9.0

Max
2800
Limit
2600
Curve: 4 2400
2200
2000
1800
1600
1400
1200
1120

350
350
332
297
259
219
180
141
106
93

.359
.352
.343
.334
.329
.329
.334
.341
.347
.344

17.9
17.6
16.3
14.2
12.2
10.3
8.6
6.9
5.3
4.6

55.6
53.5
50.8
46.6
40.9
31.1
20.0
12.0
7.3
5.1

780
738
678
596
508
399
293
208
162
131

1063
1067
1035
977
939
962
1034
1061
980
935

1856
1782
1616
1383
1161
949
741
550
409
318

Max
2800
Power
2600
Curve: M 2400
2200
2000
1800
1600
1400
1200
1120

261.0
261.0
260.0
251.0
239.0
224.0
204.0
157.0
110.0
91.0

218
215
210
206
204
206
217
253
290
289

67.9
66.7
65.1
61.5
58.1
55.0
52.8
47.4
38.1
31.3

187.8
180.7
177.2
170.9
162.8
153.3
126.6
18.0
80.1
55.1

22.1
20.9
19.5
17.7
15.8
14.0
11.2
5.4
10.2
7.7

573
575
581
583
587
605
713
832
657
612

52.6
50.5
48.0
43.8
39.8
36.4
30.7
19.5
27.9
20.6

Max
2800
Power
2600
Curve: M 2400
2200
2000
1800
1600
1400
1200
1120

350
350
349
337
321
300
274
211
148
122

.359
.353
.345
.338
.335
.338
.357
.417
.477
.475

17.9
17.6
17.2
16.2
15.3
14.5
13.9
12.5
10.1
8.3

55.6
53.5
52.5
50.6
48.2
45.4
37.5
5.3
23.7
16.3

780
738
688
625
558
494
395
191
360
272

1063
1067
1077
1081
1088
1120
1315
1529
1214
1133

1856
1782
1694
1546
1404
1284
1083
688
985
727

Prop
2800
Demand 2600
Curve: P 2400
2200
2100
2000
1800
1600
1400
1200
1120

261.0
209.0
164.4
126.6
110.1
95.1
69.3
48.7
32.6
20.5
16.7

218
212
209
209
210
211
217
229
246
265
272

68.0
52.8
41.0
31.6
27.6
24.0
17.9
13.3
9.6
6.5
5.4

187.8
159.5
128.8
90.4
71.9
55.3
29.3
13.9
5.4
0.8
2.6

22.1
19.4
16.2
12.6
10.9
9.5
7.2
5.7
4.6
3.4
3.0

573
488
431
405
399
389
359
318
273
230
215

52.6
41.9
33.1
25.6
22.2
19.2
14.2
10.6
7.9
5.5
4.7

Prop
2800
Demand 2600
Curve: P 2400
2200
2100
2000
1800
1600
1400
1200
1120

350
280
220
170
148
128
93
65
44
27
22

.359
.349
.344
.344
.345
.347
.356
.376
.404
.435
.448

18.0
13.9
10.8
8.3
7.3
6.3
4.7
3.5
2.5
1.7
1.4

55.6
47.2
38.1
26.8
21.3
16.4
8.7
4.1
1.6
0.2
0.8

780
685
572
445
385
335
254
201
162
120
106

1063
910
807
760
750
732
678
605
523
446
419

1856
1479
1168
903
783
678
501
374
279
194
166

Brake Mean Effective .....................................................................................


Pressure
1545 kPa

Brake Mean Effective .....................................................................................


Pressure
224 psi

3126 MARINE PROPULSION 261 bkW (350 bhp)


DIMENSIONS

RATING DEFINITIONS AND CONDITIONS


E RATING Planing hull vessels such as
pleasure craft, harbor patrol, harbor master, and
some fishing and pilot boats.
897 mm
35.3 in

1184 mm
46.6 in

937 mm
36.9 in

RATINGS are based on SAE J1228/ISO8665


standard conditions of 100 kPa (29.61 in. Hg),
25C (77F), and 30% relative humidity. These
ratings also apply at ISO3046/1, DIN6271/3, and
BS5514 conditions of 100 kPa (29.61 in. Hg),
27C (81F), and 60% relative humidity. Ratings
are valid for air cleaner inlet temperatures up to
and including 50C (122F) and for sea water
temperatures up to and including 42C (108F) at
sea level.
FUEL RATES are based on fuel oil of 35 API
[16C (60F)] gravity having an LHV of
42 780 kJ/kg (18,390 Btu/lb) when used at
29C (85F) and weighing 838.9 g/liter
(7.001 lbs/U.S. gal). Fuel consumption shown
with all oil, fuel, and water pumps, engine
driven. For a without pumps condition, deduct
approximately 0.5% for each pump not engine
driven.
Additional ratings may be available for specific
customer requirements. Consult your Caterpillar
representative for additional information.

3126 MARINE PROPULSION 261 bkW (350 bhp)

Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes
of comparison with other manufacturers engines. Actual engine performance may vary according to the particular application of the engine and
operating conditions beyond Caterpillars control.
TMI Reference No.: DM4952-00 (4-23-01)
Materials and specifications are subject to change without notice.
LEHM1457 (4-01)

Printed in U.S.A.

The International System of Units (SI) is used in this publication.


2001 Caterpillar
All rights reserved.

Marine
Propulsion

3126
287 bkW @ 2800 rpm
385 bhp @ 2800 rpm

SPECIFICATIONS
I-6, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant

Shown with
Accessory Equipment

Bore mm (in). . . . . . . . . . . . . . . . . . . . . . . . . . . 110 (4.33)


Strokemm (in) . . . . . . . . . . . . . . . . . . . . . . . . . . 127 (5.0)
DisplacementL (cu in). . . . . . . . . . . . . . . . . . . . 7.2 (442)
Rotation (from flywheel end). . . . . . . Counterclockwise
Compression Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.5:1
Capacity for Liquids L (U.S. gal)
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . 28 (7.4)
Lube Oil System (refill) . . . . . . . . . . . . . . . . . . . 25 (6.6)
Oil Change Interval hrs . . . . . . . . . . . . . . . . . . . . . . 250
Caterpillar DEO 10W30 or 15W40
Engine Weight, Net Dry
(approx) kg (lb) . . . . . . . . . . . . . . . . . . . . . 722 (1,592)

STANDARD ENGINE EQUIPMENT


Air Inlet System
12V air inlet heater, sea water aftercooler, air
cleaner/fumes disposal, turbocharger
Charging System
12V, 51 amp charging alternator
Control System
mechanical governor, forward facing throttle
control
Cooling System
thermostats and housing, belt-driven centrifugal
jacket water pump, gear-driven auxiliary sea water
pump, expansion tank, marine gear oil cooler,
engine mounted heat exchanger with removable
copper-nickel tube bundle, auxiliary sea water lines

Fuel System
RH or LH service filter, fuel transfer pump
Instrumentation
magnetic pickup tachometer drive, wiring harness
includes junction box, mounting and hardware, 12V
oil pressure and water temperature sender group
(single station)
Lube System
crankcase breather, gear-driven engine oil pump,
RH or LH service oil filter, oil filler, oil level gauge,
pan drain, lubricating oil
Protection System
12V energized-to-run solenoid shutoff, alarm
contactor

Exhaust System
watercooled exhaust manifold and turbocharger,
fumes disposal

Starting System
12V rear-facing electric starting motor, 12V junction
box

Flywheel and Flywheel Housing


SAE No. 3 flywheel (126 teeth) and SAE No. 3
flywheel housing, SAE standard rotation

General
vibration damper and guard, Caterpillar yellow
paint, lifting eyes

Power produced at the flywheel will be within standard tolerances up to 50C (122F)
combustion air temperature measured at the air cleaner inlet, and fuel temperature up to
52C (125F) measured at the fuel filter base. Power rated in accordance with NMMA
procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft power.

3126 MARINE PROPULSION 287 bkW (385 bhp)


PERFORMANCE CURVES
E Rating DM4951-00

IMO Compliant
450
400

300

20.1

76.0

350

70

18

250

50
4

150

40

16

300
Power - bhp

200

Fuel Rate L/hr

Power - bkW

60

Fuel Rate - g/hr

350

14

250
12

200

10

150
100

30

100
6

50

20

50

10

1000

1400

1800
2200
2600
Engine Speed - rpm

287 bkW

3000

SI Metric

0
1000

Fuel
Rate
L/h

1800
2200
2600
Engine Speed - rpm

385 bhp

3000

English

Performance Data
Engine Engine BSFC
Speed Power
g/
rpm
bkW bkW-h

1400

Performance Data

Boost Intake
Exh
Exh
Press
Air
Manif
Gas
kPa
Flow Temp
Flow
o
Gauge m3 /min
C m3 /min

Engine Engine BSFC


Speed Power
lb/
rpm
bhp
bhp-h

Fuel
Rate
gph

Boost Intake
Press
Air
in.Hg. Flow
Gauge cfm

Exh
Manif
Temp
o
F

Exh
Gas
Flow
cfm

Max
2800
Limit
2600
Curve: 4 2400
2200
2000
1800
1600
1400
1200
1120

287.0
286.0
265.9
238.3
207.8
175.8
117.0
92.2
72.4
70.5

222.2
220.2
214.2
207.1
200.9
199.5
201.3
204.0
207.7
210.2

76.0
75.1
67.9
58.8
49.7
41.8
28.1
22.4
17.9
17.7

198.7
198.3
185.5
168.0
145.5
115.1
56.4
34.6
20.8
19.7

23.0
21.9
19.8
17.4
14.6
11.7
7.7
5.7
4.2
3.8

618
628
599
562
528
531
512
510
487
501

57.9
56.7
50.2
42.2
34.2
28.0
18.8
14.0
10.2
9.4

Max
2800
Limit
2600
Curve: 4 2400
2200
2000
1800
1600
1400
1200
1120

385
384
357
320
279
236
157
124
97
95

.365
.362
.352
.340
.330
.328
.331
.335
.341
.346

20.1
19.8
17.9
15.5
13.1
11.0
7.4
5.9
4.7
4.7

58.8
58.7
54.9
49.8
43.1
34.1
16.7
10.2
6.2
5.8

812
773
699
614
516
413
272
201
148
134

1145
1162
1110
1043
982
987
953
951
909
933

2045
2002
1773
1490
1208
989
664
494
360
332

Max
2800
Power
2600
Curve: M 2400
2200
2000
1800
1600
1400
1200
1120

287.0
287.0
282.0
275.0
261.0
244.0
220.0
164.0
108.0
86.0

222.2
217.7
212.8
207.8
203.4
201.6
222.8
258.4
276.7
244.9

76.0
74.5
71.5
68.1
63.3
58.6
58.4
50.5
35.6
25.1

198.7
198.6
190.0
184.9
174.5
162.7
138.3
77.8
79.7
37.0

23.0
21.9
19.9
18.4
16.1
13.8
11.8
8.7
9.4
5.1

618
629
620
629
630
648
735
791
635
586

57.9
56.8
51.7
48.2
42.0
36.6
33.1
28.1
26.0
13.8

Max
2800
Power
2600
Curve: M 2400
2200
2000
1800
1600
1400
1200
1120

385
385
378
369
350
327
295
220
145
115

.365
.358
.350
.342
.334
.331
.366
.425
.455
.403

20.1
19.7
18.9
18.0
16.7
15.5
15.4
13.3
9.4
6.6

58.8
58.8
56.3
54.8
51.7
48.2
41.0
23.0
23.6
11.0

812
773
703
650
569
487
417
307
332
180

1145
1164
1148
1164
1166
1198
1356
1457
1176
1087

2045
2006
1826
1702
1483
1293
1169
992
918
487

Prop
2800
Demand 2600
Curve: P 2400
2200
2100
2000
1800
1600
1400
1200
1120

287.0
229.8
180.7
139.2
121.1
104.6
76.2
53.6
35.9
22.6
18.4

222.2
212.4
206.4
204.7
205.4
207.1
212.5
220.9
232.8
247.6
254.2

76.0
58.2
44.5
34.0
29.6
25.8
19.3
14.1
10.0
6.7
5.6

198.7
171.4
141.9
105.0
83.7
64.3
35.3
18.4
8.8
2.5
0.2

23.0
20.1
16.8
13.4
11.6
10.0
7.4
5.8
4.6
3.7
3.3

618
524
447
411
403
398
373
332
283
238
224

57.9
45.8
35.1
27.1
23.6
20.3
14.8
11.0
8.2
6.0
5.2

Prop
2800
Demand 2600
Curve: P 2400
2200
2100
2000
1800
1600
1400
1200
1120

385
308
242
187
162
140
102
72
48
30
25

.365
.349
.339
.337
.338
.340
.349
.363
.383
.407
.418

20.1
15.4
11.8
9.0
7.8
6.8
5.1
3.7
2.6
1.8
1.5

58.8
50.8
42.0
31.1
24.8
19.0
10.5
5.4
2.6
0.7
0.1

812
710
593
473
410
353
261
205
162
131
117

1145
975
836
772
757
748
703
629
542
460
435

2045
1617
1240
957
833
717
523
388
290
212
184

Brake Mean Effective .....................................................................................


Pressure
1699 kPa

Brake Mean Effective .....................................................................................


Pressure
246 psi

3126 MARINE PROPULSION 287 bkW (385 bhp)


DIMENSIONS

RATING DEFINITIONS AND CONDITIONS


E RATING Planing hull vessels such as
pleasure craft, harbor patrol, harbor master, and
some fishing and pilot boats.
897 mm
35.3 in

1184 mm
46.6 in

937 mm
36.9 in

RATINGS are based on SAE J1228/ISO8665


standard conditions of 100 kPa (29.61 in. Hg),
25C (77F), and 30% relative humidity. These
ratings also apply at ISO3046/1, DIN6271/3, and
BS5514 conditions of 100 kPa (29.61 in. Hg),
27C (81F), and 60% relative humidity. Ratings
are valid for air cleaner inlet temperatures up to
and including 50C (122F) and for sea water
temperatures up to and including 42C (108F) at
sea level.
FUEL RATES are based on fuel oil of 35 API
[16C (60F)] gravity having an LHV of
42 780 kJ/kg (18,390 Btu/lb) when used at
29C (85F) and weighing 838.9 g/liter
(7.001 lbs/U.S. gal). Fuel consumption shown
with all oil, fuel, and water pumps, engine
driven. For a without pumps condition, deduct
approximately 0.5% for each pump not engine
driven.
Additional ratings may be available for specific
customer requirements. Consult your Caterpillar
representative for additional information.

3126 MARINE PROPULSION 287 bkW (385 bhp)

Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes
of comparison with other manufacturers engines. Actual engine performance may vary according to the particular application of the engine and
operating conditions beyond Caterpillars control.
TMI Reference No.: DM4951-00 (8-00)
Materials and specifications are subject to change without notice.
LEHM0594 (3-01)

Printed in U.S.A.

The International System of Units (SI) is used in this publication.


2001 Caterpillar
All rights reserved.

Marine
Engine

3126

224-287 bkW/300-385 bhp


2800 rpm

CATERPILLAR ENGINE SPECIFICATIONS

Shown with
Accessory Equipment

STANDARD EQUIPMENT
Air intake
aftercooler, air cleaner/fumes disposal (closed
system), air inlet heater
Alternator
belt driven, 12 volt, 51 ampere
Cooling
transmission oil cooler, heat exchanger,
auxiliary sea water pump, expansion tank,
thermostat, jacket water pump
Exhaust
watercooled manifold and turbocharger
Flywheel and housing
SAE No. 3, rear-facing starter
Fuel
filter, fuel transfer pump
Governor
mechanical
Instrumentation
magnetic pickup (for tachometer drive)

In-Line 6, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . IMO compliant
Bore mm (in) . . . . . . . . . . . . . . . . . . . . . . . 110 (4.33)
Stroke mm (in) . . . . . . . . . . . . . . . . . . . . . . 127 (5.0)
Displacement L (cu in) . . . . . . . . . . . . . . 7.2 (442)
Rotation (from flywheel end) . . Counterclockwise
Compression Ratio . . . . . . . . . . . . . . . . . . . . . . . 15.0:1
Capacity for Liquids L (U.S. gal)
Cooling System . . . . . . . . . . . . . . . . . . . . . 28.0 (7.4)
Lube Oil System (refill) . . . . . . . . . . . . . . 25.0 (6.6)
Oil Change Interval . . . . . . . . . . . . . . . . . . . . . 250 hrs
Engine Weight, Net Dry
(approx) kg (lb) . . . . . . . . . . . . . . . . . . . 722 (1592)
Lubricating
oil filter, filler, dipstick, crankcase breather, oil
pump
Service RH and LH
service per top level PAs
Starting
electric
Torsional vibration damper
Wiring harness
junction box, mounting and hardware

DIMENSIONS

906 mm
35.7 in

1184 mm
46.6 in

937 mm
36.9 in

This Caterpillar Marine Engine can be operated with air inlet temperatures up to 50C
(122F) measured at the air inlet, and fuel temperatures up to 52C (125F) measured at
the fuel filter base. Power rated in accordance with NMMA procedure as crankshaft
power. Reduce crankshaft power by 3% for propeller shaft power.

RATING DEFINITIONS AND CONDITIONS


Ratings are based on SAE J1228/ISO8665
standard conditions of 100 kPa (29.61 in Hg),
25C (77F), and 30% relative humidity. These
ratings also apply at ISO3046/1, DIN6271/3, and
BS5514 conditions of 100 kPa (29.61 in Hg), 27C
(81F), and 60% relative humidity.

Fuel rates are based on fuel oil of 35 API [16C


(60F)] gravity having an LHV of 42 780 kJ/kg
(18 390 Btu/lb) when used at 29C (85F) and
weighing 838.9 g/liter (7.001 lbs/U.S. gal).
Additional ratings may be available for specific
customer requirements. Consult your Caterpillar
representative for additional information.
LEHM7009-04

3126 MUI MARINE ENGINE 224-287 bkW


PERFORMANCE CURVES
E Rating 2800 rpm
287 bkW (385 bhp) 390 mhp
400

175
200
75

100

1300

700
700

500

Nm

Torque
lb-ft

900

300
100

Cons. Rate
g/hr

bkW

300

100

22

70

12

40

L/hr

Power
bhp

275

10

2
1200

1400

1600

1800

2000

2200

2400

2600

2800

E Rating 2800 rpm


261 bkW (350 bhp) 355 mhp
400

75

100

1300

700
700

500

Nm

Torque
lb-ft

900

100

22

70

12

40
10

2
1600

1800

2000

2200

2400

2600

2800

Engine Speed rpm

E Rating 2800 rpm


224 bkW (300 bhp) 304 mhp
400

175
200
75

100

1300

900
700

700

500

Nm

Torque
lb-ft

bkW

300

300
100

2800
2600
2400
2200
2000
1800
1600
1400
1200

2800
2600
2400
2200
2000
1800
1600
1400
1200

2800
2600
2400
2200
2000
1800
1600
1400
1200

22

70

12

40
10

2
1400

1600

1800

2000

2200

2400

2600

2800

Engine Speed rpm


Prop Demand

979
844
719
604
499
405
320
245
180

222
212
206
205
207
213
221
233
248

76.0
58.2
44.5
34.0
25.8
19.3
14.1
10.0
6.7

Fuel
Fuel
Power Torque
Cons
Rate
bhp
lb-ft lb/bhp-hr g/hr
________________________________
385
308
242
187
140
102
72
48
30

722
623
530
445
368
299
236
181
133

.365
.349
.339
.337
.340
.349
.363
.383
.407

20.1
15.4
11.8
9.0
6.8
5.1
3.7
2.6
1.8

287
287
282
275
261
244
220
164
108

979
1054
1122
1194
1246
1294
1313
1119
859

222
218
213
208
203
202
215
256
327

76.0
74.5
71.5
68.1
63.3
58.7
56.4
50.1
42.1

Fuel
Fuel
Power
Torque
Cons
Rate
bhp
lb-ft
lb/bhp-hr g/hr
___________________________________
385
385
378
369
350
327
295
220
145

722
777
828
881
919
954
968
825
634

.365
.358
.350
.342
.334
.332
.353
.421
.537

20.1
19.7
18.9
18.0
16.7
15.5
14.9
13.2
11.1

3.0 Exponent (for displacement hulls only)

Engine Performance Parameters: Power +/- 3%;


Specific Fuel Consumption +/- 3%; Fuel Rate +/- 5%.

261
209
164
127
95
69
49
33
21

890
768
654
550
454
368
291
223
163

218
212
209
209
211
217
229
246
265

68.0
52.8
41.0
31.5
23.9
17.9
13.3
9.6
6.5

Fuel
Fuel
Power Torque
Cons
Rate
bhp
lb-ft lb/bhp-hr g/hr
________________________________
350
280
220
170
128
93
65
44
27

656
566
482
406
335
271
215
164
120

.359
.349
.344
.344
.347
.356
.376
.404
.435

18.0
13.9
10.8
8.3
6.3
4.7
3.5
2.5
1.7

TMI DM4952-00
Max Power Curve Data
Fuel
Fuel
Power
Torque
Cons
Rate
bkW
Nm
g/bkW-hr L/hr
___________________________________
261
261
260
251
239
224
204
157
110

890
959
1035
1089
1141
1188
1218
1071
875

218
215
210
206
204
206
215
249
342

67.9
66.7
65.1
61.5
58.1
55.0
52.3
46.6
44.8

Fuel
Fuel
Power
Torque
Cons
Rate
bhp
lb-ft
lb/bhp-hr g/hr
___________________________________
350
350
349
337
321
300
274
211
148

656
707
763
803
842
876
898
790
645

.359
.353
.345
.338
.335
.339
.354
.409
.562

17.9
17.6
17.2
16.2
15.3
14.5
13.8
12.3
11.8

E RATING Planing hull vessels such as pleasure craft, harbor patrol, harbor
master, and some fishing and pilot boats.
TMI DM4953-00
Cubic Prop Demand Curve Data
(for displacement hulls only)
Max Power Curve Data
Fuel
Fuel
Fuel
Fuel
Speed
Power Torque Cons
Rate
Power
Torque
Cons
Rate
rpm
bkW
Nm g/bkW-hr L/hr ___________________________________
bkW
Nm
g/bkW-hr L/hr
______
________________________________
2800
2600
2400
2200
2000
1800
1600
1400
1200

Speed
rpm
______

1200

287
230
181
139
105
76
54
36
23

Cubic Prop Demand Curve Data


(for displacement hulls only)
Fuel
Fuel
Speed
Power Torque Cons
Rate
rpm
bkW
Nm g/bkW-hr L/hr
______
________________________________

100

L/hr

Power
bhp

275

Cons. Rate
g/hr

Speed
rpm
______

Speed
rpm
______

300
100

Cons. Rate
g/hr

bkW

175
200

L/hr

Power
bhp

275
300

1400

2800
2600
2400
2200
2000
1800
1600
1400
1200

TMI DM4951-00
Max Power Curve Data
Fuel
Fuel
Power
Torque
Cons
Rate
bkW
Nm
g/bkW-hr L/hr
___________________________________

E RATING Planing hull vessels such as pleasure craft, harbor patrol, harbor
master, and some fishing and pilot boats.

Engine Speed rpm

1200

Cubic Prop Demand Curve Data


(for displacement hulls only)
Fuel
Fuel
Speed
Power Torque Cons
Rate
rpm
bkW
Nm g/bkW-hr L/hr
______
________________________________

2800
2600
2400
2200
2000
1800
1600
1400
1200

224
179
141
109
82
60
42
28
18

764
659
561
472
390
316
249
191
140

222
215
212
212
215
221
233
250
270

59.2
46.0
35.7
27.5
20.9
15.7
11.6
8.3
5.7

Fuel
Fuel
Power Torque
Cons
Rate
bhp
lb-ft lb/bhp-hr g/hr
________________________________
300
240
189
146
109
80
56
38
24

563
486
414
348
288
233
184
141
103

.364
.354
.349
.349
.353
.364
.383
.411
.444

15.6
12.2
9.4
7.3
5.5
4.1
3.1
2.2
1.5

224
224
224
221
211
198
178
154
111

764
823
891
959
1007
1050
1062
1050
883

222
214
207
201
198
218
297
376
397

59.2
57.0
55.2
52.9
49.9
51.4
63.0
68.9
52.5

Fuel
Fuel
Power
Torque
Cons
Rate
bhp
lb-ft
lb/bhp-hr g/hr
___________________________________
300
300
300
296
283
266
239
207
149

563
607
657
707
743
774
783
774
651

.364
.351
.340
.331
.326
.358
.489
.617
.653

15.6
15.1
14.6
14.0
13.2
13.6
16.6
18.2
13.9

E RATING Planing hull vessels such as pleasure craft, harbor patrol, harbor
master, and some fishing and pilot boats.
Materials and specifications are subject to change without notice.
LEHM7009-04 (4-02)

Printed in U.S.A.

The International System of Units (SI) is used in this publication.


2002 Caterpillar Inc.
All rights reserved.

Você também pode gostar