Escolar Documentos
Profissional Documentos
Cultura Documentos
2006
The copyright for the information and displays contained within this document is retained by Shanghai
Eminent Enterprise Development Co., Ltd and is therefore to be considered proprietary. It is intended for
the sole and discreet use of the party for whom it was prepared. With the exception of published technical
references, literature and brochures the information and displays shall not be disclosed to a third Party
without the prior written consent of Shanghai Eminent Enterprise Development Co., Ltd
Tel:
+86 (0)13905134168
Fax:
Shanghai
China
Email:
Web:
info@china-eminent.com
www.china-eminent.com
surveyor
from
an
independent
2. STANDARDS
OCMIF Mooring Equipment Guidelines
TMXW1-2004 QRH (Shanghai Enterprise Standard)
ASME, Section IXWelding Qualifications
ASTM A283 (Grade C) Standard
and
Specification for
Alloy
Intrinsically
Safe Process
20 m/min-25m/min
Back-stop:
The capstan gear box is a self locking device to prevent the capstan head from turning in
the opposite direction due to the weight of the mooring line at power off.
The mounting model for motor is suggested: Horizontal.
4. STRUCTURE DESIGN
MATERIAL LIST:
PART
STANDARD
REMARK
Hook
GB-ZG35CrMo
Shaft
GB-40Cr
Connector
GB-Q420A
Frame
GB-Q420A
GB-Q420A
Anchor bolts/nuts
GB-Q345A
We also can choose the right material and cumstom-made QRH base on
the actual temperature on site(-20)
We will submit the certificates for all material from an independent
Classification Society LRDNVBVABS etc.).If necessary.
90/90
HOOK ARRANGEMENT
Different arrangements available
Hooks can be installed on both sides of post
Hook post delivered with or without capstans
Free standing capstans
5. INTELLIGENT HOOK
Eminent Intelligent hook includes Remote Release System, Status Sensors and Mooring
Load Moritoring System. It is possible to performe Quick Release hooks release,
monitoring out of the dock in emergency. Ensure the Security of Jettyand operators.
Remote Release System and Status Sensors
To operate the release system from the remote location,
a central remote control
panel is included in the delivery. The panel includes:
RQRP.
Control
of
the
hooks
open/close functions is separated from the central computer system due to safety
reasons. Furthermore a special coded message protocol between the RQRP and
the hook station LAN/Ethernet unit is made to avoid accidental release of the
hooks.
The design of the RQRP allows to have multiple RQRPs connected both for
hazardous and safe area.
Mooring Load Monitoring System.
(1) The Load Pin:
The load pin is manufactured as a direct replacement for the hook swivel shafts.
The load pin shall have the same safe
working load as the corresponding mooring
hook.
The load pins are made of stainless steel
17-4PH, which is a special quality of
stainless steel with an extreme high strength.