Você está na página 1de 108

This user manual includes detailed usage

instructions for your camera. Please read


this manual thoroughly.

Ä Click a topic
Common questions

Quick reference

User Manual Contents

PL150/PL151 Basic functions

Extended functions

Shooting options

Playback/Editing

Appendixes

Index
Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.

Prevent damage to subjects’ eyesight


Warning—situations that could cause injury to yourself or
others Do not use the flash in close proximity (closer than 1 m/3 ft) to
people or animals. Using the flash too close to your subject’s
Caution—situations that could cause damage to your eyes can cause temporary or permanent damage.
camera or other equipment
Handle and dispose of batteries and chargers with care
Note—notes, usage tips, or additional information
t Use only Samsung-approved batteries and chargers.
Incompatible batteries and chargers can cause serious injuries
or damage to your camera.
t Never dispose of batteries in a fire. Follow all local regulations
Safety warnings when disposing of used batteries.
t Never place batteries or cameras on or in heating devices,
Do not use your camera near flammable or explosive such as microwave ovens, stoves, or radiators. Batteries may
gases and liquids explode when overheated.
t Do not use a damaged power supply cord, plug, or loose
Do not use your camera near fuels, combustibles, or flammable
outlet when charging batteries. This may cause a fire or electric
chemicals. Do not store or carry flammable liquids, gases, or
shock.
explosive materials in the same compartment as the camera or its
accessories.

Keep your camera away from small children and pets


Keep your camera and all accessories out of the reach of small
children and animals. Small parts may cause choking or serious
injury if swallowed. Moving parts and accessories may present
physical dangers as well.

1
Health and safety information

Safety precautions t Do not insert foreign objects into any of your camera’s
compartments, slots, or access points. Damage due to
Handle and store your camera carefully and sensibly improper use may not be covered by your warranty.
t Do not swing your camera by the strap. This may cause injury
t Do not allow your camera to get wet—liquids can cause serious to yourself or others.
damage. Do not handle your camera with wet hands. Water
t Do not paint your camera, as paint can clog moving parts and
damage to your camera can void your manufacturer’s warranty.
prevent proper operation.
t Do not expose the camera to direct sunlight or high
t Paint or metal on the outside of the camera may cause
temperatures for an extended period of time. Prolonged
allergies, itchy skin, eczema, or swelling for people with
exposure to sunlight or extreme temperatures can cause
sensitive skin. If you have experience any of these symptoms,
permanent damage to your camera’s internal components.
stop using the camera immediately and consult a doctor.
t Avoid using or storing your camera in dusty, dirty, humid, or
poorly-ventilated areas to prevent damage to moving parts and
internal components. Protect batteries, chargers, and memory cards from
t Remove the batteries from your camera when storing it for an
damage
extended period of time. Installed batteries may leak or corrode t Avoid exposing batteries or memory cards to very cold or very
over time and cause serious damage to your camera. hot temperatures (below 0º C/32º F or above 40º C/104º F).
t Protect your camera from sand and dirt when using it on Extreme temperatures can reduce the charging capacity of your
beaches or in other similar areas. batteries and can cause memory cards to malfunction.
t Protect your camera from impact, rough handling, and t Prevent batteries from making contact with metal objects, as
excessive vibration to avoid serious damage. this can create a connection between the + and – terminals
t Exercise caution when connecting cables or adapters and of your battery and lead to temporary or permanent battery
installing batteries and memory cards. Forcing the connectors, damage. Also, this may cause a fire or electric shock.
improperly connecting cables, or improperly installing batteries t Prevent memory cards from making contact with liquids, dirt, or
and memory cards can damage ports, connectors, and foreign substances. If dirty, wipe the memory card clean with a
accessories. soft cloth before inserting in your camera.
t Turn off the camera when inserting or removing the memory
card.

2
Health and safety information

t Do not bend, drop, or subject memory cards to heavy impact Ensure maximum battery and charger life
or pressure.
t Overcharging batteries may shorten battery life. After charging is
t Do not use memory cards that have been formatted by other
finished, disconnect the cable from your camera.
cameras or by a computer. Reformat the memory card with
your camera. t Over time, unused batteries will discharge and must be
recharged before use.
t Never use a damaged charger, battery, or memory card.
t Disconnect chargers from power sources when not in use.
t Use batteries only for their intended purpose.
Use only Samsung-approved accessories
Using incompatible accessories may damage your camera, Exercise caution when using the camera in humid
cause injury, or void your warranty. environments

Protect your camera’s lens When transferring the camera from a cold environment to a warm
and humid one, condensation can form on the delicate electronic
t Do not expose the lens to direct sunlight, as this may discolor circuitry and memory card. In this situation, wait for at least 1 hour
the image sensor or cause it to malfunction. until all moisture has evaporated before using the camera.
t Protect your lens from fingerprints and scratches. Clean your
lens with a soft, clean, debris-free lens cloth. Check that the camera is operating properly before use
The manufacturer takes no responsibility for any loss of files or
damage that may result from camera malfunction or improper
Important usage information use.

Allow only qualified personnel to service your camera


Do not allow unqualified personnel to service the camera or
attempt to service the camera yourself. Any damage that results
from unqualified service is not covered by your warranty.

3
Organization of the user manual

Basic functions 11
Copyright information
Learn about your camera’s layout, icons, and basic
t Microsoft Windows and the Windows logo are functions for shooting.
registered trademarks of the Microsoft Corporation.
t Mac is a registered trademark of the Apple Corporation. Extended functions 28
t HDMI, the HDMI logo and the term "High Definition Learn how to take a photo by selecting a mode and
Multimedia Interface" are trademarks or registered how to record a video or voice memo.
trademarks of HDMI Licensing LLC.
Shooting options 41
Learn about the options you can set in shooting mode.
t Camera specifications or contents of this manual may
be changed without prior notice due to upgrade of Playback/Editing 61
camera functions.
Learn how to play back photos, videos, or voice
t For Open Source License information, refer to the memos and edit photos or videos. Also, learn how to
“OpenSourceInfo.pdf” in the provided CD-ROM. connect your camera to your computer, photo printer,
TV, or HDTV.

Appendixes 84
Refer to settings, error messages, specifications, and
maintenance tips.

4
Indications used in this manual Icons used in this manual
Shooting mode Indication Icon Function
Smart Auto S Additional information
Auto a Safety warnings and precautions
Program p Camera buttons; for example: [Shutter] (represents the
[ ]
DUAL IS d shutter button)
Beauty Shot b ( ) Page number of related information

Night N The order of options or menus you must select to


perform a step; for example: Select Shooting “ White
Scene s “
Balance (represents select Shooting, and then White
Movie v Balance).
* Annotation

Shooting mode icons


These icons indicate that a function is available in the Abbreviations used in this manual
corresponding modes. The s mode may not support functions
for all scenes. Abbreviation Definition

e.g.) ACB Auto Contrast Balance


AEB Auto Exposure Bracket

Available in the AF Auto Focus


Program, DUAL IS, DIS Digital Image Stabilization
and Movie modes
DPOF Digital Print Order Format
EV Exposure Value
OIS Optical Image Stabilization
WB White Balance

5
Expressions used in this manual

Pressing the shutter Exposure (Brightness)


t Half-press [Shutter]: press the shutter halfway down The amount of light that enters your camera determines the
t Press [Shutter]: press the shutter all the way down exposure. You can alter the exposure with shutter speed,
aperture value, and ISO speed. By altering the exposure, your
photos will be darker or lighter.

Half-press [Shutter] Press [Shutter] Normal exposure Overexposure (too bright)

Subject, background, and composition


t Subject: the main object of a scene, such as a person, animal,
or still life
t Background: the objects around the subject
t Composition: the combination of a subject and background

Background

Composition
Subject

6
Common questions
You can get answers to common questions. Solve problems easily by setting shooting options.

The subject's eyes This is caused by a reflection from the camera flash.
appear red. t Set the flash option to Red-eye or Red-eye Fix. (p. 45)
t If the photo has already been taken, select Red-eye Fix in the edit menu. (p. 73)

Photos have dust Dust particles floating in the air may be captured in photos when using the flash.
spots. t Turn off the flash or avoid taking photos in a dusty place.
t Set ISO speed options. (p. 46)

Photos are blurred. This may be caused by taking photos in low light conditions or holding the camera incorrectly.
t Press [Shutter] halfway down to make sure the subject is focused. (p. 26)
t Use the d mode. (p. 33)

Photos are blurred As the camera tries to let in more light, the shutter speed slows.
when shooting at This can make it difficult to steady the camera and may result in camera shake.
night. t Rotate the mode dial to N. (p. 31)
t Turn on the flash. (p. 45)
t Set ISO speed options. (p. 46)
t Use a tripod to prevent your camera from shaking.
Subjects come out When the light source is behind the subject or when there is a high contrast between
too dark because of the light and dark areas, the subject may come out shaded.
backlighting. t Avoid shooting in front of the sun.
t Select Backlight in the s mode. (p. 30)
t Set the flash option to Fill in. (p. 45)
t Set the Auto Contrast Balance (ACB) option. (p. 54)
t Adjust the exposure. (p. 54)
t Set the metering option to Spot if a bright subject is in the center of the frame. (p. 55)

7
Quick reference
Taking photos of people Taking photos of text, insects, or t Viewing files by category in
flowers Smart Album f 63
t s mode > Portrait f 30 t s mode > Close Up, Text f 30 t Deleting all files on the
t b mode f 32 t Macro, Auto Macro (to take close-up photos) f 47 memory card f 65
t Self-portrait mode f 37 t White Balance (to change the color tone) f 55 t Viewing files as a slide show
t Children mode f 38 f 67
t Couple mode f 38 t Viewing files on a TV or HDTV
Adjusting the exposure (brightness) f 75
t Red-eye, Red-eye Fix (to prevent or correct red-eye)
f 45 t Connecting your camera to a
t ISO speed (to adjust the sensitivity to light) f 46 computer f 77
t Face Detection f 50
t EV (to adjust exposure) f 54 t Adjusting sound and volume
t ACB (to compensate for subjects against bright f 86
Taking photos at night or in the dark backgrounds) f 54 t Adjusting the brightness of
t Metering f 55 the display f 86
t s mode > Sunset, Dawn, Fireworks f 30 t AEB (to take three photos of the same scene with t Changing the display
t N mode f 31 different exposures) f 57 language f 86
t Flash options f 45 t Setting the date and time
t ISO speed (to adjust the sensitivity to light) f 46 f 87
Applying a different effect t Formatting the memory card
Taking action photos f 87
t Photo styles (to apply tones) f 58 t Troubleshooting f 96
t Continuous, Motion Capture f 57 t Smart filter effects f 59
t Image adjustment (to adjust saturation, sharpness, or
contrast) f 60

Reducing camera shake

t Optical Image Stabilization (OIS) f 24


t d mode f 33

8
Contents
Basic functions ............................................................... 11 Recording a video ............................................................... 34
Unpacking ......................................................................... 12 Using the Smart Scene Detection mode ................................ 36
Camera layout ................................................................... 13 Taking photos with the front display .................................. 37
Inserting the battery and memory card .............................. 15 Using the Self-portrait mode ................................................. 37
Charging the battery and turning your camera on ............. 16 Using the Couple mode ....................................................... 38
Charging the battery ............................................................ 16 Using the Children mode .................................................... 38
Turning on your camera ........................................................ 16 Recording a video with the front display ................................. 39
Performing the initial setup ................................................ 17 Recording voice memos ................................................... 40
Learning icons ................................................................... 18 Recording a voice memo ..................................................... 40
Adding a voice memo to a photo .......................................... 40
Selecting options ............................................................... 19
Setting the display and sound ........................................... 21
Shooting options ............................................................ 41
Changing the display type .................................................... 21
Selecting a resolution and quality ...................................... 42
Setting the sound ................................................................ 21
Selecting a resolution ........................................................... 42
Taking photos .................................................................... 22
Selecting image quality ........................................................ 42
Turning on the front display ................................................... 23
Using the timer .................................................................. 43
Zooming ............................................................................. 23
Reducing camera shake (OIS) .............................................. 24 Shooting in the dark .......................................................... 45
Preventing red-eye .............................................................. 45
Tips for getting a clearer photo .......................................... 26
Using the flash .................................................................... 45
Adjusting the ISO speed ...................................................... 46
Extended functions ........................................................ 28
Shooting modes ................................................................ 29 Changing the camera’s focus ............................................ 47
Using macro ....................................................................... 47
Using the Smart Auto mode ................................................. 29
Using auto focus ................................................................. 47
Using the Scene mode ........................................................ 30
Using tracking auto focus ..................................................... 48
Using the frame guide .......................................................... 31
Adjusting the focus area ....................................................... 49
Using the Night mode .......................................................... 31
Using the Beauty Shot mode ................................................ 32 Using face detection ......................................................... 50
Using the DUAL IS mode ..................................................... 33 Detecting faces ................................................................... 50
Using the Program mode ..................................................... 34 Taking a smile shot .............................................................. 51
Detecting eye blinking .......................................................... 51

9
Contents

Using smart face recognition ............................................... 52 Transferring files to your computer (for Windows) .............. 77
Registering faces as your favorites (My Star) .......................... 53 Transferring files using Intelli-studio ........................................ 78
Adjusting brightness and color .......................................... 54 Transferring files by connecting the camera as a removable
Adjusting the exposure manually (EV) .................................... 54 disk .................................................................................... 80
Compensating for backlighting (ACB) .................................... 54 Disconnecting the camera (for Windows XP) .......................... 81
Changing the metering option ............................................... 55 Transferring files to your computer (for Mac) ...................... 82
Selecting a light source (White balance) ................................ 55 Printing photos with a photo printer (PictBridge) ............... 83
Using burst modes ............................................................ 57
Improving your photos ...................................................... 58 Appendixes ..................................................................... 84
Applying photo styles ........................................................... 58 Camera settings menu ...................................................... 85
Applying smart filter effects ................................................... 59 Accessing the settings menu ................................................ 85
Adjusting your photos .......................................................... 60 Sound ................................................................................ 86
Display ............................................................................... 86
Playback/Editing ............................................................. 61 Settings .............................................................................. 87
Playing back ...................................................................... 62 Error messages ................................................................. 90
Starting Playback mode ....................................................... 62 Camera maintenance ........................................................ 91
Viewing photos ................................................................... 66 Cleaning your camera .......................................................... 91
Playing a video .................................................................... 68 About memory cards ........................................................... 92
Playing voice memos ........................................................... 69 About the battery ................................................................. 93
Editing a photo .................................................................. 70 Before contacting a service center .................................... 96
Resizing photos .................................................................. 70 Camera specifications ....................................................... 99
Rotating a photo .................................................................. 70 Index ............................................................................... 104
Applying photo styles ........................................................... 71
Applying smart filter effects ................................................... 72
Correcting exposure problems ............................................. 73
Creating a print order (DPOF) ................................................ 74
Viewing files on a TV or HDTV ........................................... 75

10
Basic functions
Learn about your camera’s layout, icons, and basic functions
for shooting.

Unpacking ……………………………………………… 12
Camera layout …………………………………………… 13
Inserting the battery and memory card ……………… 15
Charging the battery and turning your camera on …… 16
Charging the battery …………………………………… 16
Turning on your camera ………………………………… 16
Performing the initial setup …………………………… 17
Learning icons …………………………………………… 18
Selecting options ………………………………………… 19
Setting the display and sound ………………………… 21
Changing the display type ……………………………… 21
Setting the sound ……………………………………… 21
Taking photos …………………………………………… 22
Turning on the front display …………………………… 23
Zooming ………………………………………………… 23
Reducing camera shake (OIS) ………………………… 24
Tips for getting a clearer photo ………………………… 26
Unpacking
Check your product box for the following items.

Camera AC adapter/USB cable Rechargeable battery Strap

User Manual CD-ROM Quick Start Manual The illustrations may differ from your actual items.

Optional accessories

Camera case Memory card A/V cable Battery charger HDMI cable
(microSDTM)

Basic functions 12
Camera layout
Before you start, familiarize yourself with your camera's parts and their functions.

POWER button
Front LCD button
Shutter button
Speaker

Flash

AF-assist light/timer lamp


Front display
Microphone

Lens

USB and A/V port Tripod mount


Accepts USB cable or A/V cable

HDMI port Battery chamber cover


Accepts HDMI cable
Insert a memory card and battery

Basic functions 13
Camera layout

Zoom button
t Zoom in or out in Shooting mode.
t Zoom in on part of a photo or view files as
thumbnails in Playback mode.
Status lamp t Adjust volume in Playback mode.
t Blinking: When saving a photo or
video, being read by a computer or
printer, or out of focus
t Steady: When connecting to a
computer or in focus
2
Main display
1

Mode dial
Icon Mode Description Button Description
Take a photo by letting the camera select a scene mode
S Smart Auto m Access options or menus
as it detects

a Auto Take a photo quickly and easily with minimal settings In Shooting mode While setting
D Change the display option Move up
p Program Take a photo by setting options
M Move down
Navigation Change the macro option
Take a photo with options suitable for reducing camera F Change the flash option Move left
d DUAL IS
shake
t Change the timer option Move right
Take a photo of a person with options to hide facial
b Beauty Shot
imperfections o Confirm the highlighted option or menu
N Night Take a photo with options for shooting at night
Playback Enter Playback mode
s Scene Take a photo with options preset for a specific scene
t Access options in Shooting mode
Function
v Movie Record a video t Delete files in Playback mode

Basic functions 14
Inserting the battery and memory card
Learn to insert the battery and an optional microSDTM memory card into the camera.

Removing the battery and memory card

Push gently until the card


disengages from the
camera and then pull it out
of the slot.
Memory card

Insert a memory card with


the gold-colored contacts Battery lock Push the lock up to release
facing up. the battery.

Battery
Insert the battery with the
Samsung logo facing up.
The internal memory can be used as a temporary storage device when the
memory card is not inserted.

Basic functions 15
Charging the battery and turning your camera on

Charging the battery Turning on your camera


Before using the camera for the first time, you must charge the Press [POWER] to turn your camera on or off.
battery. Attach the USB cable to the AC adapter and then plug t The initial setup screen appears when you turn on the camera
the end of cable with the indicator light into your camera. for the first time. (p. 17)

Turning on your camera in Playback mode


Press [P]. The camera turns on and accesses Playback mode
immediately.

Indicator light
t Red: Charging
t Green: Fully charged
When you turn on your camera by pressing and holding [P] for about
5 seconds, the camera does not emit any camera sounds.

Basic functions 16
Performing the initial setup
The initial setup screen appears to allow you to configure the camera's basic settings.

1 Press [POWER]. 5 Press [F] or [t] to select a time zone and press [o].
t The initial setup screen appears when you turn on the camera t To set the daylight-saving time, press [D].
for the first time.

2 Press [t] to select Language and press [t] or [o].

Back DST

6 Press [D] or [M] to select Date & Time (Date &


Time) and press [t] or [o].
3 Press [D] or [M] to select a language and press 7 Press [F] or [t] to select an item.
[o].
Language : English

4 Press [D] or [M] to select Time Zone (Time Zone) Date & Time : 10/01/01
Time Zone : London
and press [t] or [o].
yyyy mm dd
2010 / 01 / 01 10:00 Off

Back Set

8 Press [D] or [M] to set the date and time or select a


date format, and press [o].

Basic functions 17
Learning icons
The icons displayed will change according to the mode you select or the options you set.

A Icon Description C. Icons on the left


Auto focus frame Icon Description
Aperture and shutter speed
Camera shake
B Long time shutter
Zoom ratio
Exposure value
Current date and time
White balance
B. Icons on the right
C Face tone
Icon Description
Face retouch
Photo resolution
A. Information
ISO speed
Icon Description Video resolution

Selected shooting mode Photo style


Frame rate

Available number of photos Smart filter effect


Photo quality
Image adjustment
Available recording time Metering option (contrast, sharpness, saturation)
Internal memory Flash option Burst type

Memory card inserted Timer option Optical Image Stabilization (OIS)


t : Fully charged
Auto focus option
t : Partially charged
t (Red) : Charging needed Face detection

Voice memo Voice muted

Basic functions 18
Selecting options
You can select options by pressing [m] and using the navigation buttons ([D], [M], [F], [t]).

You can also access shooting options by pressing [f] but some options are not available.

1 In Shooting mode, press [m]. Going back to the previous menu


Press [m] again to go back to the previous menu.
2 Use the navigation buttons to scroll to an option or
menu.
Press [Shutter] to return to Shooting mode.
t To move left or right, press [F] or [t].
t To move up or down, press [D] or [M].

EV

Back Move

3 Press [o] to confirm the highlighted option or menu.

Basic functions 19
Selecting options

E.g. Selecting a white balance option in the P mode 3 Press [D] or [M] to scroll to Shooting and then
press [t] or [o].
1 Rotate the mode dial to p.
4 Press [D] or [M] to scroll to White Balance and then
press [t] or [o].
Photo Size
Quality
EV
ISO
2 Press [m]. White Balance
Face Detection
Photo Size
Smart FR Edit
Shooting Quality
Exit Back
EV
Sound
ISO
Display White Balance
Face Detection
5 Press [F] or [t] to scroll to a white balance option.
Settings
Smart FR Edit
Exit Change

Daylight

Back Move

6 Press [o].

Basic functions 20
Setting the display and sound
Learn how to change the basic settings for the display and sound according to your preferences.

Changing the display type Setting the sound


Select a style of display for Shooting or Playback mode. Set whether your camera emits a specified sound when you
operate your camera.
Press [D] repeatedly to change a display type.
1 In Shooting or Playback mode, press [m].

2 Select Sound “ Beep Sound “ an option.


Option Description
Show all photographic Off The camera does not emit any sounds.
information.
1/2/3 The camera emits sounds.

Mode Description
t Display all information about shooting
Shooting
t Hide information about shooting, except the
available number of photos (or available recording
time) and the battery icon
t Display all information about the current photo
t Hide all information about the current file
Playback
t Display information about the current file, except the
shooting settings and captured date

Basic functions 21
Taking photos
Learn basic actions to take photos easily and quickly in the Auto mode.

1 Rotate the mode dial to a. 3 Half-press [Shutter] to focus.


t A green frame means the subject in focus.

2 Align your subject in the frame.

4 Press [Shutter] to take a photo.

See page 26 for tips to get clearer photos.

Basic functions 22
Taking photos

Turning on the front display Zooming


The front display will help you take a self-portraits or photos You can shoot close-up photos by adjusting the zoom. Your
of children. You can also use the Couple mode with the front camera has a 5X optical zoom and 5X digital zoom. By using
display. (p. 37) both, you can zoom in up to 25 times.
Rotate [Zoom] right to zoom in on your subject. Rotate [Zoom]
Press [Front LCD] to turn on the front display.
left to zoom out.

Zoom ratio

Zoom out Zoom in


t When you set timer options, the front display will remain active. (p. 43)
t When you turn on the front display, the icons on the main display may
not be shown and the main display may dim.
t When you use the camera in brightly lit or sunny areas, you may not
be able to see the front display clearly.

Basic functions 23
Taking photos

Digital zoom Reducing camera shake (OIS) apbNsv


If the zoom indicator is in the digital range, your camera is using Reduce camera shake optically in Shooting mode.
the digital zoom. The picture quality may deteriorate when you
use the digital zoom.
Optical range Zoom indicator

Digital range Before correction After correction

t The digital zoom is not available when using S, d, b,


s (in some scenes), N, and v modes and when used with 1 In Shooting mode, press [m].
Face Detection and Smart Filter.
t It may take longer to save a photo when using the digital zoom. 2 Select Shooting “ OIS “ an option.
Option Description
Off: Deactivate the OIS function.
On: Activate the OIS function.

Basic functions 24
Taking photos

t OIS may not function properly when:


- you move your camera to follow a moving subject
- you use digital zoom
- there is too much camera shake
- the shutter speed is slow (e.g., when in the N mode)
- the battery is low
- you take a close-up shot
t If you use the OIS function with a tripod, your images may be blurred
by the vibration of the OIS sensor. Deactivate the OIS function when
you use a tripod.
t If the camera is impacted, the display will be blurry. In this case, turn
off the camera and turn it on again to use the OIS function correctly.
t In some scene modes, the OIS function is unavailable.

Basic functions 25
Tips for getting a clearer photo

Holding your camera correctly Reducing camera shake

Make sure nothing is t Set the Optical Image Stabilization option to


blocking the lens. reduce camera shake optically. (p. 24)
t Select the d mode to reduce camera shake
both optically and digitally. (p. 33)

When H is displayed

Half-pressing the shutter button

Half-press [Shutter] and adjust the Camera shake


focus. Focus and exposure will be
adjusted automatically.

When shooting in the dark, avoid setting the flash option to


Slow Sync or Off. The aperture remains open longer and it may be
harder to hold the camera still.
The aperture value and shutter t Use a tripod or set the flash option to Fill in. (p. 45)
speed are automatically set.
t Set ISO speed options. (p. 46)
Focus frame
t Press [Shutter] to take the photo
if displayed in green.
t Change the frame and half-press
[Shutter] again if displayed in red.

Basic functions 26
Preventing your subject from being out of focus
It may be difficult to get your subject in focus when: t When you take photos in low light
- there is little contrast between the subject and background
(When your subject is wearing a color of clothing that is similar to the Turn on the flash.
background) (p. 45)
- the light source behind the subject is too bright
- the subject is shiny
- the subject includes horizontal patterns, such as blinds
- the subject is not positioned in the center of the frame

t When subjects are moving fast

Use the continuous


or motion capture
function. (p. 57)

Use the focus lock


Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to take your photo.

Basic functions 27
Extended functions
Learn how to take a photo by selecting a mode and how to
record a video or voice memo.

Shooting modes ………………………………………… 29


Using the Smart Auto mode …………………………… 29
Using the Scene mode ………………………………… 30
Using the frame guide ………………………………… 31
Using the Night mode ………………………………… 31
Using the Beauty Shot mode …………………………… 32
Using the DUAL IS mode ……………………………… 33
Using the Program mode ……………………………… 34
Recording a video ……………………………………… 34
Using the Smart Scene Detection mode ……………… 36
Taking photos with the front display …………………… 37
Using the Self-portrait mode …………………………… 37
Using the Couple mode ………………………………… 38
Using the Children mode ……………………………… 38
Recording a video with the front display ……………… 39
Recording voice memos ……………………………… 40
Recording a voice memo ……………………………… 40
Adding a voice memo to a photo ……………………… 40
Shooting modes
Take photos or record videos by selecting the best shooting mode for the conditions.

Using the Smart Auto mode Icon Description


In this mode, your camera automatically chooses the appropriate Appears when taking portraits at night.
camera settings based on a defected type of scene. It will be
Appears when taking photos of landscapes with
helpful if you are not familiar with the camera settings for various
backlighting.
scenes.
Appears when taking portraits with backlighting.
1 Rotate the mode dial to S. Appears when taking portraits.
2 Align your subject in the frame. Appears when taking close-up photos of objects.
t The camera selects a scene automatically. An appropriate Appears when taking close-up photos of text.
mode icon will appear at the top left of the screen.
Appears when taking photos of sunsets.
Appears when taking photos of clear skies.
Appears when taking photos of forested areas.
Appears when taking close-up photos of colorful
subjects.
Appears when taking close-up portraits of people.
Appears when the camera and subject are stable for
a while. This is available only when you are shooting
Icon Description in the dark.
Appears when taking photos of landscapes. Appears when taking photos of actively moving
subjects.
Appears when taking photos of bright white
backgrounds. Appears when taking photos of fireworks. This is
available only when you use a tripod.
Appears when taking photos of landscapes at night.
This is available only when the flash is off.

Extended functions 29
Shooting modes

3 Half-press [Shutter] to focus. Using the Scene mode


4 Press [Shutter] to take the photo. Take a photo with options preset for a specific scene.

t If the camera does not recognize a proper scene mode, R will 1 Rotate the mode dial to s.
appear and the default settings will be used.
t Even if there is a face detected, the camera may not select a portrait 2 Select a scene.
mode depending on the subject's position or lighting.
t The camera may not select the correct scene depending on shooting
environments, such as camera shake, lighting, and distance to the Portrait
subject.
t Even if you use a tripod, the mode may not be detected depending
on the subject's movement.

This mode is appropriate for taking pictures


of faces.

t To change the scene mode, press [m] and select Scene


“a scene.
t For the Frame Guide mode, see “Using the frame guide" on
page 31.
t For the Night mode, see “Using the Night mode” on page 31.

3 Align your subject in the frame and half-press [Shutter]


to focus.

4 Press [Shutter] to take the photo.

Extended functions 30
Shooting modes

Using the frame guide Using the Night mode


When you want another person to take a photo of you, you can Use the Night mode to take a photo with options for shooting at
compose the scene with the frame guide feature. The frame night. Use a tripod to prevent your camera from shaking.
guide will help the other person take a photo of you by showing
the part of the pre-composed scene. 1 Rotate the mode dial to N.

1 Rotate the mode dial to s. 2 Align your subject in the frame and half-press [Shutter]
to focus.
2 Select Frame Guide.
3 Press [Shutter] to take the photo.
3 Align your subject in the frame and press [Shutter].
t Transparent guides will appear on the left and right of the
frame.
Adjusting the exposure in the Night mode
In the Night mode, you can catch brief flashes of light as curved
streaks by extending the exposure. Use a slow shutter speed
to extend the time until the shutter closes. Increase the aperture
value to prevent overexposure.

1 Rotate the mode dial to N.


Cancel Frame: OK
2 Press [m].

3 Select Shooting “ Long Time Shutter.


4 Ask another person to take a photo.
t The person must align the subject in the frame by using the
guides, and then press [Shutter] to take the photo.

5 To cancel the guides, press [o].

Extended functions 31
Shooting modes

4 Select the aperture value or shutter speed. Using the Beauty Shot mode
Take a photo of a person with options to hide facial imperfections.
Aperture value

Aperture
Shutter speed
1 Rotate the mode dial to b.

2 To make the subject's skin tone appear lighter (face


only), press [m].

Back Move
3 Select Shooting “ Face Tone “an option.
t Select a higher setting to make skin tone appear lighter.

5 Select an option. Level 2


t If you select AUTO, the aperture value or shutter speed will be
adjusted automatically.

6 Align your subject in the frame and half-press [Shutter]


to focus.

7 Press [Shutter] to take the photo. Back Move

Use a tripod to prevent your photos from blurring. 4 To hide facial imperfections, press [m].

Extended functions 32
Shooting modes

5 Select Shooting “ Face Retouch “an option. Using the DUAL IS mode
t Select a higher setting to hide a greater number of Reduce camera shake and prevent blurred photos with Optical
imperfections. and Digital Image Stabilization functions.

Level 3

Before correction After correction


Back Move

1 Rotate the mode dial to d.


6 Align your subject in the frame and half-press [Shutter]
to focus. 2 Align your subject in the frame and half-press [Shutter]
to focus.
7 Press [Shutter] to take the photo.
3 Press [Shutter] to take the photo.
The focus distance will be set to Auto Macro.
t The digital zoom will not work in this mode.
t The photo will be corrected optically only when taken with a light
source that is brighter than fluorescent light.
t If your subject is moving rapidly, the photo may be blurry.
t Set the Optical Image Stabilization option to reduce camera shake in
different shooting modes. (p. 24)

Extended functions 33
Shooting modes

Using the Program mode Recording a video


Set various options (except for shutter speed and aperture value) Record videos of up to 20 minutes in length in high definition.
in the Program mode. The recorded video is saved as an H.264 (MPEG-4.AVC) file.

1 Rotate the mode dial to p. t H.264 (MPEG-4 part10/AVC) is a high-compression video format
established by international standard organizations ISO/IEC and ITU-T.
2 Set options. t Some memory cards may not support high definition recording. In this
(For a list of options, refer to “Shooting options.”) case, set a lower resolution. (p. 42)
t When the Optical Image Stabilization is activated, your video may be
3 Align your subject in the frame and half-press [Shutter] recorded with the OIS operation sound.
to focus.

4 Press [Shutter] to take the photo. 1 Rotate the mode dial to v.

2 Press [m].

3 Select Movie “ Frame Rate “a frame rate (the


number of frames per second).
t As the number of frames increases, action appears more
natural, but the file size is increased.

60 FPS is available only when the video resolution is 320 x 240.

Extended functions 34
Shooting modes

4 Press [m]. To pause recording


The camera allows you to pause temporarily while recording a
5 Select Movie “ Voice “a sound option.
video. With this function, you can record your favorite scenes as
Option Description a single video.
On: Record a video with sound. (While you are zooming, Press [o] to pause while recording. Press it again to resume.
sound recording will be interrupted.)
Off: Record a video without sound.

6 Set other options as desired.


(For options, refer to “Shooting options.”)

7 Press [Shutter] to start recording.

8 Press [Shutter] again to stop recording. Stop Pause

Extended functions 35
Shooting modes

Using the Smart Scene Detection mode 5 Press [Shutter] to start recording.
In this mode, your camera automatically chooses the appropriate
camera settings based on a detected type of scene.
6 Press [Shutter] again to stop recording.

t If the camera does not recognize a proper scene mode, r will not
1 Rotate the mode dial to v. change and the default settings will be used.
t The camera may not select the correct scene depending on shooting
2 Press [m]. environments, such as camera shake, lighting and distance to the

3
subject.
Select Movie “ Smart Scene Detection “ On.

4 Align your subject in the frame.


t The camera selects a scene automatically. An appropriate
mode icon will appear at the top left of the screen.

Icon Description
Appears when recording videos of landscapes.
Appears when recording videos of clear skies.
Appears when recording videos of forested areas.
Appears when recording videos of sunsets.

Extended functions 36
Taking photos with the front display
The front display will help take self-portraits or photos of children. You can also use the Couple mode with the front display.

t When you press [Front LCD] repeatedly, the shooting mode changes from Self-portrait mode to Couple mode or to Children mode.
When recording videos, you cannot use the Couple mode.
t In some shooting modes, the front display does not display a frame to indicate the detected face and the Self-portrait mode and
the Couple mode are not available.

Using the Self-portrait mode 1 In Shooting mode, press [Front LCD] once.
Take photos of yourself conveniently using the front display. t Your camera will detect your face automatically and display a
frame to indicate the detected face.
You can set the camera to automatically release the shutter when it detects a
smiling face while taking a photo with the front display. (p. 89)

2 Half-press [Shutter] to focus.

3 Press [Shutter] to take the photo.

Extended functions 37
Taking photos with the front display

Using the Couple mode Using the Children mode


This mode detects two subjects leaning in toward each other and In this mode, you can draw children’s attention to the camera by
automatically captures images of posing couples. showing a short animation on the front display.

1 In Shooting mode, press [Front LCD] twice. 1 In Shooting mode, press [Front LCD] three times.
t An animation will play.

t The white frame means that the faces are recognized.


t The green frame means that the faces are in focus when you
half-press [Shutter]. 2 Align your subject in the frame and half-press [Shutter].
2 Lean in toward each other in the frame. 3 Press [Shutter] to take the photo.

t The camera will detect two faces of the subjects at the same distance t You can download animations from the website.
from the camera. Visit www.samsung.com or www.samsungimaging.com for more
t The camera may not detect the composition depending on the pose information.
of couples. t You can add sounds to animations to draw children's attention. (p. 86)
t You can set the camera to automatically release the shutter when it
detects a smiling face while using the Children mode. (p. 89)

Extended functions 38
Taking photos with the front display

Recording a video with the front display


Recording a video in the Self-portrait mode

1 Rotate the mode dial to v.

2 Press [Front LCD] once.

3 Press [Shutter] to start recording.

4 Press [Shutter] again to stop recording.

Recording a video in the Children mode

1 Rotate the mode dial to v.

2 Press [Front LCD] twice.

3 Press [Shutter] to start recording.

4 Press [Shutter] again to stop recording.

Extended functions 39
Recording voice memos apdbNs

Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of
shooting conditions.

You will get the best sound quality when recording 40 cm away from the camera.

Recording a voice memo Adding a voice memo to a photo


1 In Shooting mode, press [m]. 1 In Shooting mode, press [m].

2 Select Shooting “ Voice “ Record. 2 Select Shooting “ Voice “ Memo.

3 Press [Shutter] to record. 3 Align your subject in the frame and take a photo.
t You can record voice memos of up to 10 hours in length. t You will begin recording a voice memo right after taking the
t Press [o] to pause or resume recording. photo.

4 Record a short voice memo (10 seconds maximum).


t Press [Shutter] to stop recording a voice memo.

Stop Pause

4 Press [Shutter] to stop.


t Press [Shutter] again to record a new voice memo.

5 Press [m] to switch to Shooting mode.

Extended functions 40
Shooting options
Learn about the options you can set in shooting mode.

Selecting a resolution and quality ………… 42 Adjusting brightness and color …………… 54
Selecting a resolution ………………………… 42 Adjusting the exposure manually (EV) ……… 54
Selecting image quality ……………………… 42 Compensating for backlighting (ACB) ……… 54
Using the timer ……………………………… 43 Changing the metering option ……………… 55
Selecting a light source (White balance) …… 55
Shooting in the dark ……………………… 45
Preventing red-eye …………………………… 45 Using burst modes ………………………… 57
Using the flash ……………………………… 45 Improving your photos …………………… 58
Adjusting the ISO speed …………………… 46 Applying photo styles ………………………… 58
Changing the camera’s focus …………… 47 Applying smart filter effects ………………… 59
Using macro ………………………………… 47 Adjusting your photos ……………………… 60
Using auto focus …………………………… 47
Using tracking auto focus …………………… 48
Adjusting the focus area ……………………… 49
Using face detection ……………………… 50
Detecting faces ……………………………… 50
Taking a smile shot …………………………… 51
Detecting eye blinking ……………………… 51
Using smart face recognition ……………… 52
Registering faces as your favorites (My Star) … 53
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.

Selecting a resolution apdbNsvS When recording a video:


As you increase the resolution, your photo or video will include
more pixels, so it can be printed on larger paper or displayed on
1 In the v mode, press [m].
a larger screen. When you use a high resolution, the file size will
also increase.
2 Select Movie “ Movie Size “ an option.
Option Description

When taking a photo: 1280 X 720 HQ: Play back high-quality files on an HDTV.
1280 X 720: Play back on an HDTV.
1 In Shooting mode, press [m].
640 X 480: Play back on a general TV.
2 Select Shooting “ Photo Size “ an option. 320 X 240: Post on a web page.
Option Description
4000 X 3000: Print on A1 paper.
3984 X 2656: Print on A2 paper in wide ratio (3:2).
Selecting image quality apdbNs
3840 X 2160: Print on A2 paper in panorama ratio (16:9) Photos you take are compressed and saved in JPEG format.
or play back on an HDTV. Higher quality images will result in larger sizes.
3264 X 2448: Print on A3 paper.
2560 X 1920: Print on A4 paper. 1 In Shooting mode, press [m].
2048 X 1536: Print on A5 paper. 2 Select Shooting “ Quality “ an option.
1920 X 1080: Print on A5 paper in panorama ratio (16:9) Option Description
or play back on an HDTV.
Super Fine
1024 X 768: Attach to email.
Fine
Normal

The options may differ depending on the shooting mode.

Shooting options 42
Using the timer apdbNsvS

Learn how to set the timer to delay shooting.

1 In Shooting mode, press [t]. 3 Press [Shutter] to start the timer.


t The AF-assist light/timer lamp blinks. The camera will
automatically take a photo at the specified time.
t The front display will start the countdown a few seconds
Off before shooting.

2 Select an option.
Option Description
Off: The timer is not active.
10 Sec: Take a photo in 10 seconds.
2 Sec: Take a photo in 2 seconds.
Double: Take a photo in 10 seconds and take another t Press [t] to cancel the timer.
in 2 seconds. t Depending on the selected face detection option, the timer is not
available or some timer options are not available.
Jump Shot: Activate the jump shot timer. (p. 44)

The options may differ depending on the shooting mode.

Shooting options 43
Using the timer

Using the jump shot timer 4 Jump when the jump icon appears on the front display.
Take a photo of people jumping. The jump shot timer tells you t The camera will take 3 photos in succession.
when to jump by displaying an icon on the front display.

If you are taking photos using the jump shot timer in low light conditions or

1 In Shooting mode, press [t]. indoors, photos may be dark.

2 Select Jump Shot.


t The front display will turn on.

3 Press [Shutter].
t The front display will start the countdown a few seconds
before shooting.

Shooting options 44
Shooting in the dark
Learn how to take photos at night or in low light conditions.

Preventing red-eye apbNs Using the flash apbNsS

If the flash fires when you take a photo of a person in the dark, a Use the flash when taking photos in the dark or when you need
red glow may appear in the eyes. To prevent this, select Red-eye more light on your photos.
or Red-eye Fix. Refer to flash options in "Using the flash."
1 In Shooting mode, press [F].

Auto

2 Select an option.
Option Description
Off:
t The flash will not fire.
t Camera shake warning ( ) will be displayed when
shooting in low light.
Auto: The camera will select a proper flash setting for
the detected scene in the S mode.

Shooting options 45
Shooting in the dark

Option Description t Flash options are not available if you set burst options or select
Red-eye Fix*: Blink Detection.
t The flash fires when the subject or background is t Make sure that your subjects are within the recommended distance
from the flash. (p. 99)
dark.
t If there is reflected light or much dust in the air, tiny spots may appear
t The camera corrects red-eyes through its advanced on your photo.
software analysis.
Slow Sync:
t The flash fires and the shutter stays open longer.
t Select this when you want to capture ambient light to
reveal more details in the background.
t Use a tripod to prevent your photos from blurring. Adjusting the ISO speed p
Fill in: The ISO speed is the measure of a film’s sensitivity to light as
t The flash always fires. defined by the International Organization for Standardization (ISO).
t Light intensity is adjusted automatically. The higher ISO speed you select, the more sensitive to light your
Red-eye*: camera becomes. With a higher ISO speed, you can get a better
t The flash fires when the subject or background is photo without using the flash.
dark.
t The camera reduces red-eyes. 1 In Shooting mode, press [m].
Auto: The flash fires automatically when the subject or
background is dark.
2 Select Shooting “ ISO “ an option.
t Select to use an appropriate ISO speed based on the
The options may differ depending on the shooting mode. brightness of the subject and lighting.
* There is an interval between two bursts of the flash. Do not move until
the flash fires a second time. t The higher ISO speed you select, the more image noise you may get.
t When Motion Capture is set, ISO speed will be set to Auto.

Shooting options 46
Changing the camera’s focus
Learn how to adjust the camera's focus according to your subjects.

Using macro apdv Using auto focus apdv


Use macro to take close-up photos of subjects, such as flowers To take sharp photos, select the appropriate focus according to
or insects. Refer to macro options in “Using auto focus.” your distance from the subject.

1 In Shooting mode, press [M].

Normal (AF)

2 Select an option.
Option Description
Normal (AF): Focus on a subject farther than 80 cm
t Try to hold the camera very still to prevent blurry photos.
(farther than 1 m when using zoom).
t Turn off the flash if the distance to the subject is less than 40 cm.
Macro: Focus on a subject 5-80 cm (1-1.5 m when
using zoom).
Auto Macro: Focus on a subject farther than 5 cm
(farther than 1 m when using zoom).
The options may differ depending on the shooting mode.

Shooting options 47
Changing the camera’s focus

Using tracking auto focus apdNs t Tracking a subject may fail when:
Tracking AF allows you to track and auto focus on your subject, - the subject is too small or the subject moves excessively
- the subject is backlit or you are shooting in a dark place
even when you are moving.
- colors or patterns on the subject and the background are the same

1 In Shooting mode, press [m].


- the camera shakes excessively
In these cases, the focus frame will appear as a white single-line

2 Select Shooting “ Focus Area “ Tracking AF.


frame.
t If the camera fails to track the subject, you must reselect the subject

3 Focus on the subject you want to track and press [o]. to track.
t If the camera fails to fix the focus, the focus frame will change to a red
t A focus frame will appear on the subject and will follow the single-line frame.
subject as you move the camera. t If you use this function, you cannot set face detection, photo style
options, and smart filter effects.

Tracking AF

t The white frame means that your camera is tracking the


subject.
t The green frame means that your subject is in focus when you
half-press [Shutter].

Shooting options 48
Changing the camera’s focus

Adjusting the focus area apdNs


You can get clearer photos by selecting an appropriate focus
area according to your subject’s location in the scene.

1 In Shooting mode, press [m].

2 Select Shooting “ Focus Area “ an option.


Option Description
Center AF: Focus on the center (suitable when subjects
are located in the center).
Multi AF: Focus on one or more of 9 possible areas.

Tracking AF: Focus on and track the subject. (p. 48)

The options may differ depending on the shooting mode.

Shooting options 49
Using face detection apdbs

If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera
adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to
capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them.

t In some scene modes, face detection is unavailable. Detecting faces


t Face detection may not be effective when: Your camera automatically detects human faces (up to 10 human
- the subject is far from the camera (The focus frame will appear faces).
orange for Smile Shot and Blink Detection)
- it is too bright or too dark
- the subject is not facing the camera
- the subject is wearing sunglasses or a mask
- the subject is in backlighting or the lighting condition is unstable
- the subject’s facial expression changes remarkably
t Face detection is not available when using a photo style,
smart filter effect, or image adjustment option or when used with
Tracking AF.
t Face detection is not available when using the digital zoom.
t Depending on the selected face detection option, the timer is not
available or some timer options are not available.
t Depending on the selected face detection option, some burst options
are not available.
1 In Shooting mode, press [m].
t When you take photos of detected faces, they will be registered in
the face list.
2 Select Shooting “ Face Detection “ Normal.
t The nearest face appears in a white focus frame and the rest
t You can view registered faces in order of priority in Playback mode.
(p. 63) Even though faces are registered successfully, they may not be of the faces appear in gray focus frames.
classified in Playback mode.
t The detected face in Shooting mode may not appear in the face list t The closer you are to the subject, the quicker your camera will detect
or Smart Album. faces.
t When you use the burst option, the detected faces may not be
recognized.

Shooting options 50
Using face detection

Taking a smile shot Detecting eye blinking


The camera automatically releases the shutter when it detects a If your camera detects closed eyes, it will automatically take
smiling face. 2 photos in succession.

1 In Shooting mode, press [m].


1 In Shooting mode, press [m].
2 Select Shooting “ Face Detection “ Blink Detection.
2 Select Shooting “ Face Detection “ Smile Shot.
t Hold your camera still while “Capturing” is displayed on the screen.
t When your subject smiles broadly, your camera can detect
t When blink detection fails, “Picture taken with eyes closed.”
the smile more easily.
message appears. Take another photo.

Shooting options 51
Using face detection

Using smart face recognition t The camera may recognize and register faces incorrectly depending
The camera automatically registers faces that you frequently on lighting conditions, remarkable changes in the subject's pose or
face, and whether or not the subject is wearing glasses.
photograph (up to 10 people). This feature will automatically
t The camera can automatically register up to 12 faces. If the camera
prioritize the focus on those faces. This feature is available only
recognizes a new face when there are 12 registered faces, it will
when you use a memory card. replace the face in the lowest priority with the new one.
t The camera can detect up to 10 faces in one scene.

1 In Shooting mode, press [m].

2 Select Shooting “ Face Detection “ Smart Face


Recognition.
t The nearest face appears in a white focus frame and the rest
of the faces appear in gray focus frames.
t : Indicate favorite faces (To register favorite faces, see
page 53).
t : Indicate faces that the camera automatically registers.

Shooting options 52
Using face detection

Registering faces as your favorites (My Star) 4 When you are finished taking the photos, the face list
You can register your favorite faces to prioritize the focus and appears.
exposure on those faces. This feature is available only when you t Your favorite faces are indicated with a on the face list.
use a memory card.
t You can register up to 8 favorite faces.
1 In Shooting mode, press [m]. t The flash option will be set to Off.
t If you register the same face twice, you can delete one of the faces
2 Select Shooting “ Smart FR Edit “ My Star. in the face list.

3 Align your subject’s face with the oval guideline and


press [Shutter] to register the face.
t If the subject’s face is not aligned with the oval guideline, the
white frame will not appear. Viewing your favorite faces
t You can take photos of a subject’s face directly from the front,
to the left side, to the right side, from above, or from below. 1 In Shooting mode, press [m].
t Take photos of one person at a time when registering faces.
2 Select Shooting “ Smart FR Edit “ Face List.

t To change the ranking of the favorite faces, press [f] and select Edit
Ranking. (p. 63)
t To cancel the favorite faces, press [f] and select Delete My Star.
(p. 63)

Back Set

Shooting options 53
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.

Adjusting the exposure manually Compensating for backlighting (ACB) p

(EV) p d v When the light source is behind your subject or there is high
Depending on the intensity of the ambient light, your photos contrast between your subject and the background, your subject
may be too bright or dark. In these cases, you can adjust the is likely to appear dark in the photo. In this case, set the Auto
exposure to get a better photo. Contrast Balance (ACB) option.

Darker (-) Neutral (0) Brighter (+)


Without ACB With ACB

1 In Shooting mode, press [m].


1 In Shooting mode, press [m].
2 Select Shooting “EV.
2 Select Shooting “ACB “ an option.
3 Select a value to adjust the exposure.
Option Description
t Once you adjust the exposure, the setting will remain the same. You Off: ACB is off.
may need to change the exposure value later to avoid overexposure
or underexposure. On: ACB is on.
t If you cannot decide on an appropriate exposure, select AEB (Auto
Exposure Bracket). The camera takes photos with different exposures:
normal, underexposed, and overexposed. (p. 57) t The ACB feature is always on in the a mode.
t You cannot set burst options when this feature is on.

Shooting options 54
Adjusting brightness and color

Changing the metering option pdv Selecting a light source


The metering mode refers to the way in which a camera (White balance) p d v
measures the quantity of light. The brightness and lighting of your The color of your photo depends on the type and quality of the
photos will vary depending on the metering mode you select. light source. If you want the color of your photo to be realistic,
select an appropriate lighting condition to calibrate the white
1 In Shooting mode, press [m]. balance, such as Auto WB, Daylight, Cloudy, or Tungsten.
2 Select Shooting “Metering “ an option.
Option Description
Multi:
t Your camera divides the scene into several areas, and
then measures the light intensity of each area.
t Suitable for general photos.
(Auto WB) (Daylight)
Spot:
t Your camera measures only the light intensity of the
very center of the frame.
t If a subject is not in the center of the scene, your
photo may be improperly exposed.
t Suitable for a subject with backlighting.
Center-weighted:
t Your camera averages the meter reading of the entire (Cloudy) (Tungsten)
frame with emphasis placed on the center.
t Suitable for photos with subjects in the center of the
frame.

Shooting options 55
Adjusting brightness and color

1 In Shooting mode, press [m]. Defining your own white balance

2 Select Shooting “White Balance “ an option. 1 In Shooting mode, press [m].


Icon Description
2 Select Shooting “White Balance “
Auto WB: Use automatic settings depending on the Measure: Shutter.
lighting conditions.
Daylight: Select when taking outdoor photos on a 3 Aim the lens at a piece of white paper.
sunny day.
Cloudy: Select when taking outdoor photos on a cloudy
day or in shadows.
Fluorescent_H: Select when shooting under a daylight
fluorescent or three-way fluorescent light.
Fluorescent_L: Select when shooting under white
fluorescent light.
Tungsten: Select when taking indoor photos under
incandescent bulbs or halogen lamps.
Measure: Shutter (Custom setting): Use your
pre-defined settings. 4 Press [Shutter].

Shooting options 56
Using burst modes p

It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.
In these cases, select one of the burst modes.

Option Description
AEB:
• Take 3 photos with different exposures: normal,
underexposed, and overexposed.
• Use a tripod to prevent blurry photos.
The options may differ depending on the shooting mode.

1 In Shooting mode, press [m]. • You can use the flash, timer, and ACB only when you select
Single.
2 Select Shooting → Drive → an option. • When you select Motion Capture, the resolution will be set to
VGA and the ISO speed will be set to Auto.
Option Description • Depending on the selected face detection option, some burst
Single: Take a single photo. options are not available.

Continuous:
• While you are pressing [Shutter], the camera takes
photos continuously.
• The maximum number of photos depends on the
capacity of your memory card.
Motion Capture:
• While you are pressing [Shutter], the camera takes
VGA photos (6 photos per second; maximum of 30
photos).
• The camera automatically shows you the photos just
taken and then saves them.

Shooting options 57
Improving your photos
Learn how to improve your photos by applying photo styles, colors, or smart filter effects, or make some adjustments.

Applying photo styles apdv Defining your own RGB tone


Apply a different photo style to your photos, such as Soft, Vivid,
or Forest.
1 In Shooting mode, press [m].

2 Select Shooting “Photo Style Selector “Custom


RGB.

3 Select a color (R: Red, G: Green, B: Blue).

Soft Vivid Forest

1 In Shooting mode, press [m].

2 Select Shooting “Photo Style Selector “ an option.


t Select Custom RGB to define your own RGB tone. Back Move

t When you select Sketch, the photo will be automatically resized to


or smaller. 4 Adjust the amount of the selected color.
t If you use this function, you cannot set the smart filter and image (-: less or +: more)
adjustment options.

Shooting options 58
Improving your photos

Applying smart filter effects apdv 1 In Shooting mode, press [m].


Apply various filter effects to your photos to create unique images.
2 Select Shooting “Smart Filter.

3 Select an effect.
Option Description
Normal: No effect.
Miniature: Make a photo of a life-size location or object
Miniature Vignetting look like a photo of a miniature scale model. Blurring
parts of the photo makes the scene seem much smaller
than it actually is.
Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect.
Fish-eye 1: Distort close objects to imitate the visual
effect of a fisheye lens.
Fish-eye 1 Fish-eye 2 Fish-eye 2: Blacken the edges of the frame and distort
objects to imitate the visual effect of a fisheye lens.

t If you select Miniature when recording a video, the miniature


recording time is displayed with the icon and is shorter than the
real recording time.
t If you select Miniature when recording a video, the sound will not
be recorded.
t When you apply a smart filter effect while recording a video, the video
will be automatically resized to or smaller.
t If you use this function, you cannot set the photo style and image
adjustment options.

Shooting options 59
Improving your photos

Adjusting your photos p Saturation option Description


Adjust the contrast, sharpness, and saturation of your photos. - Decrease the saturation.

1 In Shooting mode, press [m]. + Increase the saturation.

2 Select Shooting “Image Adjust.


t Select 0 if you do not want to apply any effects. (suitable for printing)
3 Select an adjustment option. t If you use this function, you cannot set the photo style and smart filter
effects.
t Contrast
t Sharpness
t Saturation

4 Select a value to adjust the selected item.


Contrast option Description
- Decrease the color and brightness.
+ Increase the color and brightness.

Sharpness option Description


Soften the edges on your photos (suitable for
-
editing the photos on your computer).
Sharpen the edges to improve the clarity
+ of your photos. This may also increase the
noise on your photos.

Shooting options 60
Playback/Editing
Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to
connect your camera to your computer, photo printer, TV, or HDTV.

Playing back ………………………………… 62 Transferring files to your computer


Starting Playback mode ……………………… 62 (for Windows) ……………………………… 77
Viewing photos ……………………………… 66 Transferring files using Intelli-studio ………… 78
Playing a video ……………………………… 68 Transferring files by connecting the camera
Playing voice memos ………………………… 69 as a removable disk ………………………… 80
Editing a photo ……………………………… 70 Disconnecting the camera (for Windows XP) 81
Resizing photos ……………………………… 70 Transferring files to your computer
Rotating a photo …………………………… 70 (for Mac) …………………………………… 82
Applying photo styles ………………………… 71 Printing photos with a photo printer
Applying smart filter effects ………………… 72 (PictBridge) ………………………………… 83
Correcting exposure problems ……………… 73
Creating a print order (DPOF) ………………… 74
Viewing files on a TV or HDTV …………… 75
Playing back
Learn actions to play back photos, videos, or voice memos, and managing files.

Starting Playback mode Display in Playback mode


View photos or play videos and voice memos stored in your
camera.

1 Press [P].
t The most recent file you have taken or recorded will be Information
displayed.
t If the camera is off, it will turn on.

2 Press [F] or [t] to scroll through files.


t Press and hold to scroll through files quickly.
Icon Description
t If you want to view files stored in the internal memory, remove your
memory card. Photo includes a voice memo
t The camera will not properly play back files that are too large or those Video file
taken with cameras from other manufacturers.
Print order has been set (DPOF)

Protected file
Photo includes a registered face; Available only when you
use a memory card
Folder name – File name

Playback/Editing 62
Playing back

Ranking your favorite faces Canceling your favorite faces


You can change the ranking of your favorite faces or delete them.
This feature is available only when you use a memory card. 1 In Playback mode, press [m].

1 In Playback mode, press [m]. 2 Select File Options “ Face List Edit “
Delete My Star.
2 Select File Options “ Face List Edit “ Edit Ranking.
3 Select a face and press [o].
3 Select a face from the list and press [o].
4 Press [f].
Face List Edit

1 4
5 Select Yes.

2 5

3 6 Viewing files by category in Smart Album


4 8 View and manage files by categories, such as date, file type, or
week.
Back Set

1 In Playback mode, rotate [Zoom] left.


4 Press [D] or [M] to change the ranking of the face,
2 Press [m].
and press [f].

Playback/Editing 63
Playing back

3 Select a category. Viewing files as thumbnails


Scan thumbnails of files.
Type
In Playback mode, rotate [Zoom] left to display 9 or
Date 20 thumbnails (rotate [Zoom] right to return to the
Color previous mode).
Week
Face

Back Set

Option Description
Type View files by the file type.
Date View files by the date they were saved.
Color View files by the dominant color of the image.
Filter
Week View files by the weekday they were saved.
View files by recognized faces and favorite faces. To Do this
Face
(Up to 20 people)
Scroll through files Press [D], [M], [F], or [t].

It may take some time for the camera to open Smart Album or to change Delete files Press [f] and select Yes.
the category and recognize files.

4 Press [F] or [t] to scroll through files.


• Press and hold to scroll through files quickly.

5 Press [o] to return to the normal view.

Playback/Editing 64
Playing back

Protecting files Deleting files


Protect your files from accidental deletion. Delete single files or all files at once. You cannot delete protected
files.
1 In Playback mode, press [m].

2 Select File Options “Protect “Select. To delete a single file,


t To protect all files, select All “Lock.
1 In Playback mode, select a file and press [f].
3 Select the file you want to protect and press [o].
t Press [o] again to cancel your selection. 2 Select Yes to delete the file.

To delete multiple files,

1 In Playback mode, press [f].

2 Select Multiple Delete.

3 Select files you want to delete and press [o].


t Press [o] again to cancel your selection.
Select Set

4 Press [f].
4 Press [f].
5 Select Yes.

To delete all files,

1 In Playback mode, press [m].

2 Select File Options “ Delete “ All “ Yes.

Playback/Editing 65
Playing back

Copying files to the memory card The enlarged area and zoom ratio are indicated on the top of the
You can copy files from the internal memory to a memory card. screen. The maximum zoom ratio may vary depending on the
resolution.
1 In Playback mode, press [m].

2 Select File Options “Copy to Card.

3 Select Yes to copy files.

Trim
Viewing photos
Zoom in on part of a photo or view photos in a slide show.
To Do this
Move the enlarged area Press [D], [M], [F], or [t].
Enlarging a photo
Trim the enlarged photo Press [o] (it will be saved as a new file).

In Playback mode, rotate [Zoom] right to enlarge


a photo (rotate [Zoom] left to reduce a photo).

Playback/Editing 66
Playing back

Starting a slide show 4 Set the slide show effect.


You can apply effects and audio to your slide show.
5 Select Start “Play.
1 In Playback mode, press [m]. t To loop the slide show, select Repeat.
t Press [o] to pause or resume the slide show.
2 Select Multi Slide Show.
To stop the slide show and switch to Playback mode, press [o] and then
3 Select a slide show effect option. [F] or [t].
t Skip to step 5 to start a slide show with no effects.
Option Description
Set the photos you want to view as a slide show.
t All: View all photos in a slide show.
Images t Date: View photos captured on a specific date in
a slide show.
t Select: View selected photos in a slide show.
t Set the interval between photos.
Interval t This is available when Off is selected in the effect
option.
Music Select a background audio.
t Select a transition effect.
Effect
t Select Off for no effects.

Playback/Editing 67
Playing back

Playing a video Trimming a video during playback


You can play a video, capture an image from a video, or crop a
video.
1 Press [o] at the point where you want the new video to
begin and rotate [Zoom] right.
1 In Playback mode, select a video and press [o].
2 Press [o] to resume playback.

3 Press [o] at the point where you want the new video to
end and rotate [Zoom] right.

4 Select Yes.

t The original video should be at least 10 seconds long.


t The edited video will be saved as a new file.
Pause

2 Use the following buttons to control playback.


Press To Capturing an image during playback
[F] Scan backward.
[o] Pause or resume playback.
1 Press [o] at the point where you want to save a still
image.
[t] Scan forward.
[Zoom] left or right Adjust the volume level. 2 Press [M].

A captured image will have the same file size as the original video file and will
be saved as a new file.

Playback/Editing 68
Playing back

Playing voice memos Adding a voice memo to a photo

Playing a voice memo 1 In Playback mode, select a photo and press [m].

1 In Playback mode, select a voice memo and press [o].


2 Select File Options “ Voice memo “ On.

3 Press [Shutter] to record a short voice memo


2 Use the following buttons to control playback.
(10 seconds maximum).
Press To t Press [Shutter] to stop recording a voice memo.
[F] Scan backward.
[o] Pause or resume playback.
[t] Scan forward. Playing a voice memo added to a photo
[M] Stop playback. In Playback mode, select a photo that includes a voice
[Zoom] left or right Adjust the volume level. memo and press [o].
t Press [o] to pause or resume playback.

Playback/Editing 69
Editing a photo
Perform photo editing tasks, such as resizing, rotating, eliminating red-eyes, and adjusting brightness, contrast, or saturation.

Edited photos will be saved as new files.

Resizing photos Rotating a photo


1 In Playback mode, select a photo and press [m]. 1 In Playback mode, select a photo and press [m].

2 Select Edit “ Resize “ an option. 2 Select Edit “ Rotate “ an option.


t Select to save the photo as a start image. (p. 86)

2048 X 1536 Right 90˚

Back Move
Back Move

Available options differ depending on the size of the selected photo.

Playback/Editing 70
Editing a photo

Applying photo styles Defining your own RGB tone


Apply a different photo style to the photo, such as Soft, Vivid, or
Forest.
1 In Playback mode, select a photo and press [m].

2 Select Edit “ Photo Style Selector “ Custom RGB.

3 Select a color (R: Red, G: Green, B: Blue).

Soft Vivid Forest

1 In Playback mode, select a photo and press [m].

2 Select Edit “Photo Style Selector “an option. Back Move


t Select Custom RGB to define your own RGB tone.
4 Adjust the amount of the selected color.
(-: less or +: more)

Soft

Back Move

Playback/Editing 71
Editing a photo

Applying smart filter effects 1 In Playback mode, select a photo and press [m].
Apply various filter effects to your photos to create unique images.
2 Select Edit “Smart Filter.

3 Select an effect.

Miniature Vignetting Miniature

Back Move

Fish-eye 1 Fish-eye 2

Playback/Editing 72
Editing a photo

Correcting exposure problems Adjusting brightness/contrast/saturation


Adjust ACB (Auto Contrast Balance), brightness, contrast, or
saturation; remove red-eye; hide facial imperfections; or add
1 In Playback mode, select a photo and press [m].
noise to the photo. 2 Select Edit “ Image Adjust.

Adjusting ACB (Auto Contrast Balance) 3 Select an adjustment option.


t : Brightness
1 In Playback mode, select a photo and press [m]. t : Contrast
t : Saturation
2 Select Edit “ Image Adjust “ ACB.
4 Select a value to adjust the selected item.
(-: less or +: more)
Removing red-eye

1 In Playback mode, select a photo and press [m]. Adding noise to the photo

2 Select Edit “ Image Adjust “ Red-eye Fix.


1 In Playback mode, select a photo and press [m].

2 Select Edit “ Image Adjust “ Add Noise.


Hiding facial imperfections

1 In Playback mode, select a photo and press [m].

2 Select Edit “ Image Adjust “ Face Retouch.

3 Select a level.
t As the number increases, the face becomes clearer.

Playback/Editing 73
Editing a photo

Creating a print order (DPOF) 4 Press [m].


Select photos to be printed and set options, such as number of
copies or paper size.
5 Select File Options “ DPOF “ Size “ an option.
Option Description
t The memory card can be taken to a print shop that supports DPOF Select Specify the print size for the selected photo.
(Digital Print Order Format) or you can print photos directly through a
All Specify the print size for all photos.
DPOF-compatible printer at home.
t Wide photos may print with the left and right edges cut off, so be Reset Reset your settings.
aware of the dimensions of your photos.
t You cannot set the DPOF for the photos stored in the internal memory.
6 If you select Select, scroll to a photo and rotate [Zoom]
left or right to select the print size. Repeat for the photos
1 In Playback mode, press [m]. you want and press [f].
t If you select All, press [D] or [M] to select the print size
2 Select File Options “ DPOF “ Standard “ an option. and press [o].
Option Description
Select Print the selected photos.
Printing photos as thumbnails
All Print all photos.
Reset Reset your settings. 1 In Playback mode, press [m].

2 Select File Options “ DPOF “ Index “ Yes.


3 If you select Select, scroll to a photo and rotate [Zoom]
left or right to select the number of copies. Repeat for If you specify the print size, you can print photos only with DPOF 1.1-compatible
the photos you want and press [f]. printers.

t If you select All, press [D] or [M] to select the number of


copies and press [o].

Playback/Editing 74
Viewing files on a TV or HDTV
Play back photos or videos by connecting your camera to a TV using the A/V cable.

1 In Shooting or Playback mode, press [m]. t On some TVs, digital noise may occur or part of an image may not
appear.
2 Select Settings “ Video Out. t Images may not appear centerd on the TV screen depending on your

3
TV settings.
Select a video signal output according to your country t You can capture photos or videos while the camera is connected
or region. to a TV.

4 Turn off your camera and TV.

5 Connect your camera to your TV using the A/V cable.


Video Audio Viewing files on an HDTV
You can view high-quality and uncompressed photos or videos
on an HDTV using the optional HDMI cable. HDMI (High Definition
Multimedia Interface) is supported by most HDTVs.

1 In Shooting or Playback mode, press [m].

2 Select Settings “ HDMI Size.

3 Select an HDMI resolution.

4 Turn off your camera and HDTV.


6 Turn on your TV and select the video output mode using
the TV remote control.

7 Turn on your camera and press [P].

8 View photos or play videos using the buttons on your


camera.

Playback/Editing 75
Viewing files on a TV or HDTV

5 Connect your camera to your HDTV using the optional


HDMI cable.

6 Turn on your camera.


t The HDTV will be powered on automatically and the camera
screen will be displayed.

7 View files using the buttons on your camera or a remote


control of your HDTV.

If your HDTV supports the Anynet+(CEC) profile, turn the Anynet+ on in the
settings menu (p. 88) to control all connected Samsung A/V devices with the
TV remote control.

Playback/Editing 76
Transferring files to your computer (for Windows)
Transfer files to your computer using the built-in Intelli-studio program. You can also edit files or upload files to your favorite websites.

Requirements for Intelli-studio


t Intelli-studio may not perform correctly on some computers, even
Item Requirements when the computer meets the requirements.
t If your computer does not meet the requirements, videos may not play
Intel Pentium 4, 3.2 GHz or higher/ correctly or it may take longer to edit videos.
CPU
AMD Athlon™ FX 2.6 GHz or higher t Install DirectX 9.0c or above before you use the program.
Minimum 512 MB RAM t You must use Windows XP/Vista/7 or Mac OS 10.4 or later to
RAM
(1 GB and above recommended) connect the camera as a removable disk.
OS Windows XP SP2/Vista/7
Hard disk
250 MB or more (1 GB or more recommended) Using a self-assembled PC or a PC and OS that are not supported may void
capacity
your warranty.
t CD-ROM drive
t nVIDIA Geforce 7600GT or higher/ATI X1600 series
or higher
Others t 1024 x 768 pixels, 16-bit color display compatible
monitor (1280 x 1024 pixels, 32-bit color display
recommended)
t USB port, Microsoft DirectX 9.0c or later

Playback/Editing 77
Transferring files to your computer (for Windows)

Transferring files using Intelli-studio 5 Turn on the camera.


Intelli-studio will start automatically when you connect the camera • The computer recognizes the camera automatically.
to your computer with the USB cable. If you set the USB option to Select Mode, select Computer from the
pop-up window.
The battery will be charged while the camera is connected to a computer with
the USB cable.

6 Select a folder on your computer to save new files.


• If your camera has no new files, the pop-up window for saving
1 In Shooting or Playback mode, press [m]. new files will not appear.

2 Select Settings → PC Software → On. 7 Select Yes.


• New files will be transferred to the computer.
3 Turn off the camera.
4 Connect the camera to your computer with the USB For Windows Vista, select Run iStudio.exe from the AutoPlay window.
cable.
You must plug the end of the cable with the indicator light (▲) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.

Playback/Editing 78
Transferring files to your computer (for Windows)

Using Intelli-studio
Intelli-studio is a built-in program that allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube.
For details, select Help “ Help in the program.

t If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool “ Install Intelli-studio on PC.
t You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
t You cannot copy files in your computer to the camera.
t Intelli-studio supports the following formats:
- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
- Photos: JPG, GIF, BMP, PNG, TIFF

1 2 3 4 5

15 6
14 7

13 8

12 10

11

Playback/Editing 79
Transferring files to your computer (for Windows)

Icon Description Transferring files by connecting the camera


1 Open menus as a removable disk
2 Display files in the selected folder You can connect the camera to your computer as a removable
disk.
3 Change to the Photo edit mode
4 Change to the Video edit mode 1 In Shooting or Playback mode, press [m].
Change to the Sharing mode (You can send files by email
5
or upload files to websites, such as Flickr or YouTube.) 2 Select Settings “PC Software“Off.
6 Enlarge or reduce the thumbnails in the list 3 Turn off the camera.
7
8
Select a file type
4 Connect the camera to your computer with the USB
View files of the selected folder on your computer cable.
9 Show or hide files of the connected camera
You must plug the end of the cable with the indicator light (S) into
10 View files of the selected folder on the camera your camera. If the cable is reversed, it may damage your files. The
11 View files as thumbnails, in Smart Album, or on a map manufacturer is not responsible for any loss of data.

12 Browse folders in the connected device


13 Browse folders in your computer
14 Move to the previous or next folder
Print files, view files on a map, store files in My Folder, or
15
register faces

Playback/Editing 80
Transferring files to your computer (for Windows)

5 Turn on the camera. Disconnecting the camera (for Windows XP)


t The computer recognizes the camera automatically. The way to disconnect the USB cable for Windows Vista/7 is
If you set the USB option to Select Mode, select Computer from the similar.
pop-up window.
1 If the status lamp on your camera is blinking, wait until
it stops.
6 On your computer, select My Computer “Removable
2 Click on the tool bar at the bottom right of your PC
Disk “DCIM “100PHOTO.
screen.
7 Select the files you want and drag or save them to your
computer.

3 Click the pop-up message.

4 Remove the USB cable.

The camera may not be removed safely when Intelli-studio is running.


End the program before disconnecting the camera.

Playback/Editing 81
Transferring files to your computer (for Mac)
When you connect the camera to a Macintosh computer, the computer will recognize the device automatically.
You can transfer files directly from the camera to the computer without installing any programs.

Mac OS 10.4 or later is supported.

1 Connect your camera to a Macintosh computer with the 2 Turn on the camera.
USB cable. t The computer recognizes the camera automatically and a
removable disk icon will be displayed.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The If you set the USB option to Select Mode, select Computer from the
manufacturer is not responsible for any loss of data. pop-up window.

3 Double-click the removable disk icon.

4 Transfer photos or videos to the computer.

Playback/Editing 82
Printing photos with a photo printer (PictBridge)
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.

1 In Shooting mode, press [m]. Configuring print settings

2 Select Settings “ USB.


Images : One Photo
3 Select Printer. Size : Auto

4 With the printer on, connect your camera to the printer Layout : Auto
with the USB cable. Type : Auto
Quality : Auto

Exit Print

Option Description
Images: Select whether to print the current photo or all
photos.
5 Turn on your camera. Size: Specify the size of the print.
t The printer recognizes the camera automatically. Layout: Create thumbnail prints.

6 Press [F] or [t] to select a photo. Type: Select the type of paper.
t Press [m] to set printing options. Quality: Set the printing quality.
See “Configuring print settings.” Date: Set to print the date.
7 Press [o] to print. File Name: Set to print the name of the file.
t Printing starts. Press [F] to cancel printing. Reset: Reset the print options.

Some options are not supported by some printers.

Playback/Editing 83
Appendixes
Refer to settings, error messages, specifications, and
maintenance tips.

Camera settings menu ………………………………… 85


Accessing the settings menu …………………………… 85
Sound …………………………………………………… 86
Display ………………………………………………… 86
Settings ………………………………………………… 87
Error messages ………………………………………… 90
Camera maintenance …………………………………… 91
Cleaning your camera ………………………………… 91
About memory cards …………………………………… 92
About the battery ……………………………………… 93
Before contacting a service center …………………… 96
Camera specifications ………………………………… 99
Index …………………………………………………… 104
Camera settings menu
Learn about various options to configure your camera's settings.

Accessing the settings menu 3 Select an option and save your settings.

1 In Shooting or Playback mode, press [m]. Volume


Start Sound
Off
Low
2 Select a menu. Shutter Sound
Beep Sound
Medium
High
AF Sound
Volume
Shooting Children Sound :1
Start Sound
Sound Shutter Sound
Beep Sound Back Set
Display
AF Sound
Settings Children Sound
4 Press [m] to return to the previous screen.
Exit Change

Menu Description
Sound: Set various camera sounds and volume.
(p. 86)
Display: Customize the display settings, such as
language and brightness. (p. 86)
Settings: Change the settings for the camera system,
such as memory format, default file name, and USB
mode. (p. 87)

Appendixes 85
Camera settings menu

Sound Display
* Default * Default
Item Description Item Description
Adjust the volume of any sound. Language Select a language for the display text.
Volume
(Off, Low, Medium*, High) Display a brief description of an option or menu.
Function
Select a sound to be emitted when turning on your Description (Off, On*)
Start Sound
camera. (Off*, 1, 2, 3) Set a start image to display when the camera turns
Select a sound to be emitted when pressing the on.
Shutter Sound
shutter button. (Off, 1*, 2, 3) t Off*: Display no start image.
Select a sound to be emitted when pressing the t Logo: Display a default image stored in the internal
Beep Sound memory.
buttons or switching modes. (Off, 1*, 2, 3)
Set a sound to be emitted when half-pressing the Start Image t User Image: Display the image you want. (p. 70)
AF Sound
shutter button. (Off, On*) t Only one start image will be saved in the internal
memory.
Set a sound to be emitted in the Children mode. t If you select a new photo as a start image or reset
Children Sound
(Off, 1*, 2, 3) your camera, the current image will be deleted.
t A wide image or image in 3:2 ratio cannot be set
as a start image.

Adjust the brightness of the screen.


Display (Auto*, Dark, Normal, Bright)
Brightness
Normal is fixed in Playback mode even if Auto is selected.

Appendixes 86
Camera settings menu

* Default * Default
Item Description Item Description
Set the duration for reviewing a captured image before Reset menus and shooting options (date and time,
Quick View returning to Shooting mode. Reset language, and video output settings will not be reset).
(Off, 0.5 sec*, 1 sec, 3 sec) (Yes, No)
If you perform no operations for 30 seconds, the Set the date and time and select a date format.
Date & Time
camera automatically switches to Power save mode (Off*, dd/mm/yyyy, mm/dd/yyyy, yyyy/mm/dd)
(press any button to deactivate the Power save
Time Zone Select a region and set the daylight-saving time (DST).
Power Save mode). (Off*, On)
If the Power save mode is deactivated, the main display will Specify how to name files.
dim to save battery life when you perform no operations for t Reset: Set the file number to start from 0001 when
about 30 seconds. inserting a new memory card, formatting a memory
card, or deleting all files.
t Series*: Set the file number to follow the previous
file number when inserting a new memory card,
formatting a memory card, or deleting all files.
Settings
t The default name of the first folder is 100PHOTO
* Default and the default name of the first file is SAM_0001.
File No.
Item Description t The file number increases one by one from
SAM_0001 to SAM_9999.
Format the internal memory and the memory card
t The folder number increases one by one from
(all files-including the protected files-will be deleted).
100PHOTO to 999PHOTO.
(Yes, No)
t The maximum number of files that can be stored in
Format If you use a memory card used with cameras from one folder is 9999.
different manufacturers or a memory card reader, or one t The camera defines file names according to the
formatted on a computer, your camera may read the Digital rule for Camera File system (DCF) standard.
card incorrectly. Format the card before using it. If you change the names of files intentionally, the
camera may not play back the files.

Appendixes 87
Camera settings menu

* Default * Default
Item Description Item Description
Set whether to display the date and time on your Set an assistant light to help you focus in dark places.
AF Lamp
photos when printing. (Off*, Date, Date & Time) (Off, On*)
t The date and time will be displayed on the Set to control the camera connected to a Samsung
bottom-right corner of the photo in yellow. HDTV that supports Anynet+(CEC) with the TV remote
Imprint
t The date and time may not be printed on some control.
printer models. Anynet+
t On*: Control the camera with an HDTV remote
t If you select Text in the s mode, the date and (HDMI-CEC)
control.
time will not be displayed.
t Off: View files without using an HDTV remote
Set the camera to automatically turn off when you are control.
not using it. (Off, 1 min, 3 min*, 5 min, 10 min)
Select the resolution of photos when playing back
t Your settings will not change after replacing the
Auto Power files on an HDTV with the HDMI cable.
battery.
Off t The camera will not automatically turn off when:
(NTSC: 1080i*, 720p, 480p/
- it is connected to a computer or printer PAL: 1080i*, 720p, 576p)
- you are playing a slide show or videos HDMI Size t If the HDTV does not support the selected
- you are recording a voice memo resolution, the HDTV automatically selects the
next lower resolution.
Set the video signal output according to your region. t If you select 480p or 576p, the playback menus
t NTSC*: USA, Canada, Japan, Korea, Taiwan, and Smart Album will not be available when
Mexico. connected to a TV.
Video Out
t PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, Finland, Germany,
England, Italy, Kuwait, Malaysia, New Zealand,
Singapore, Spain, Sweden, Switzerland, Thailand,
Norway.

Appendixes 88
Camera settings menu

* Default
Item Description

Set the function to use via a USB connection with a


computer or printer.
t Computer*: Connect your camera to a computer
for transferring files.
USB
t Printer: Connect your camera to a printer for
printing files.
t Select Mode: Select a USB mode when you
connect your camera to another device.

Set Intelli-studio to start automatically when you


PC Software
connect your camera to your computer. (Off, On*)
Set the camera to automatically release the shutter
Front Smile
when it detects a smiling face while using the Self-
Shot
portrait mode. (On*, Off)
Set the camera to automatically release the shutter
Children
when it detects a smiling face while using the
Smile Shot
Children mode. (On*, Off)
Set the camera to play the animation with sound
through the front display when you turn it on (for shop
display). (Off*, On)
Front Display t In Demo mode, you cannot take photos or
Demo record videos. To switch to Shooting mode,
press [o].
t Demo mode is not available if you turn on the
camera in Playback mode or when the camera is
connected with another device.

Appendixes 89
Error messages
When the following error messages appear, try these remedies.

Error message Suggested remedies


t Turn off your camera and then turn it on again.
Card Error t Remove your memory card and insert it again.
t Format your memory card. (p. 87)
Card not The inserted memory card is not available with
supported. your camera. Insert a microSDTM memory card.
File names do not match the DCF standard.
DCF Full Error Transfer the files on the memory card to your
computer and format the card. (p. 87)
Delete the damaged file or contact a service
File Error
center.
Low Battery Insert a charged battery or recharge the battery.
Delete unnecessary files or insert a new memory
Memory Full
card.
Take photos or insert a memory card that has
No Image File
some photos.

Appendixes 90
Camera maintenance

Cleaning your camera Camera body


Wipe gently with a soft, dry cloth.
Camera lens and display
Use a blower brush to remove dust and wipe the lens gently with
a soft cloth. If any dust remains, apply lens cleaning liquid to a
piece of cleaning paper and wipe gently.

t Never use benzene, thinners, or alcohol to clean the device. These


solutions can damage the camera or cause it to malfunction.
t Do not press on the lens cover or use a blower brush on the lens
cover.

Appendixes 91
Camera maintenance

About memory cards Memory card capacity


The memory capacity may differ depending on shooting scenes
Memory cards you can use or shooting conditions. These capacities are based on a 1 GB
microSDTM card:
You can use microSDTM (Secure Digital) memory cards.
Size Super Fine Fine Normal 60 FPS 30 FPS 15 FPS
145 281 399 - - -
166 310 436 - - -
P 200 363 522 - - -
h
o 209 370 531 - - -
t 335 560 783 - - -
o
s 526 793 1,053 - - -
860 1,131 1,421 - - -
1,455 1,651 1,851 - - -
Approx. Approx.
- - - -
12’ 40’’ 23’ 07’’
*
V Approx. Approx.
i - - - -
14’ 17’’ 25’ 46’’
d
e Approx. Approx.
o - - - -
24’ 43’’ 47’ 30’’
s
Approx. Approx. Approx.
- - -
50’ 20’’ 72’ 37’’ 93’ 17’’
* The recordable time may vary if you use the zoom.
Several videos were recorded in succession to determine the total
recording time.

Appendixes 92
Camera maintenance

About the battery Battery life


Use only Samsung-approved batteries. Shooting time / Shooting conditions
Number of photos (when the battery is fully charged)
Battery specifications This is measured under the following
conditions: in the a mode, 12M
Mode SLB-07 resolution, Fine quality, OIS on.
Type Lithium-ion battery
1. Set the flash option to Fill in, take a
Cell capacity 760 mAh single shot, and zoom in or out.
Voltage 3.8 V Approx. 100 min/ 2. Set the flash option to Off, take a
Photos
Approx. 200 single shot, and zoom in or out.
Charging time
Approx. 150 min 3. Perform steps 1 and 2 for 30
(when the camera is switched off)
seconds and repeat for 5 minutes.
Then turn off the camera for
1 minute.
4. Repeat steps 1 to 3.
Record videos at 1280 X 720 HQ
Videos Approx. 70 min
resolution and 30 fps.

t The figures above are measured by Samsung’s standards and may differ
depending on actual usage.
t Several videos were recorded in succession to determine the total recording
time.

Appendixes 93
Camera maintenance

Notes about charging the battery Notes about charging with a computer connected
t If the indicator light is off, make sure that the battery is inserted t Use only the provided USB cable.
correctly. t The battery may not be charged when:
t Turn off your camera when charging. - you use a USB hub
t Turn on your camera after charging the battery for more than 10 - other USB devices are connected to your computer
minutes. - you connect the cable to the port on the front side of your
t Using the flash or recording videos depletes the battery quickly. computer
Charge the battery until the indicator light turns green. - the USB port of your computer does not support the power output
t If the indicator light blinks in orange or does not illuminate, reconnect standard (5 V, 500 mA)
the cable, or remove the battery and insert it again.
t If you charge the battery when the cable is overheated or the
temperature is too high, the indicator light may turn orange. Charging
will start when the battery cools down.

Appendixes 94
Camera maintenance

Personal injury or death can occur if the battery is t Do not disassemble or puncture the battery with any
handled carelessly or improperly. For your safety, sharp object.
follow these instructions for proper battery handling: t Avoid exposing the battery to high pressure or crushing
t The battery can ignite or explode if not handled properly. If forces.
you notice any deformities, cracks, or other abnormalities t Avoid exposing the battery to major impacts, such as
in the battery, immediately discontinue use of the battery dropping it from high places.
and contact your manufacturer.
t Do not expose the battery to temperatures of 60 °C
t Use only authentic, manufacturer-recommend battery (140° F) or above.
chargers and adapters and charge the battery only by the
t Do not allow the battery to come in contact with moisture
method described in this user manual.
or liquids.
t Do not place the battery near heating devices or expose
to excessively warm environments, such as the inside of
Disposal guidelines
an enclosed car in the summertime.
t Dispose of the battery with care.
t Do not place the battery in a microwave oven.
t Do not dispose of the battery in a fire.
t Avoid storing or using the battery in hot, humid places,
t Disposal regulations may differ by country or region.
such as spas or shower enclosures.
Dispose of the battery in accordance with all local and
t Do not rest the device on flammable surfaces, such as federal regulations.
bedding, carpets, or electric blankets for a prolonged
period.
Guidelines for charging the battery
t When the device is switched on, do not leave it in any Charge the battery only by the method described in this user
confined space for a prolonged period. manual. The battery can ignite or explode if not charged
t Do not allow battery terminals to come in contact with properly.
metallic objects, such as necklaces, coins, keys, or
watches.
t Use only authentic, manufacturer-recommended, Lithium-
ion replacement batteries.

Appendixes 95
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before contacting a service center. If you have attempted
the troubleshooting solution and are still having problems with your device, contact your local dealer or service center.

Situation Suggested remedies Situation Suggested remedies


t Make sure that the battery is inserted. t There is no space on the memory card.
Cannot turn on the t Make sure that the battery is inserted Delete unnecessary files or insert a new
camera correctly. card.
t Charge the battery. t Format the memory card. (p. 87)
t Charge the battery. t The memory card is defective. Get a
Cannot take photos new memory card.
t Your camera may be in Power save
The power turns off mode. (p. 87) t Make sure that the camera is switched
suddenly on.
t The camera may turn off to prevent the
memory card from being damaged due t Charge the battery.
to an impact. Turn on your camera again. t Make sure that the battery is inserted
correctly.
t The battery may lose power more quickly
in low temperatures (below 0° C). Keep The camera freezes Remove the battery and insert it again.
the battery warm by putting it into your t The flash option may be set to Off.
pocket. (p. 45)
The flash does not work
The camera is losing t Using the flash or recording videos t You cannot use the flash in the d,
battery power quickly depletes the battery quickly. Recharge v, or some s modes.
if needed.
The flash fires The flash may fire due to static electricity.
t Batteries are consumable parts that must unexpectedly This is not a malfunction of the camera.
be replaced over time. Get a new battery
if the battery life is diminishing quickly. The date and time are Set the date and time in the display settings
incorrect menu. (p. 87)

Appendixes 96
Before contacting a service center

Situation Suggested remedies Situation Suggested remedies


The display or buttons t Turn off the flash. (p. 45)
Remove the battery and insert it again.
do not work The photo is too bright t Your photo is overexposed. Adjust the
If you use your camera at low temperatures, exposure value. (p. 54)
it will cause the camera screen to Your photo is underexposed.
The camera screen malfunction or discolor. t Turn on the flash. (p. 45)
works poorly For better performance of your camera The photo is too dark
t Adjust the ISO speed. (p. 46)
screen, use your camera at normal
temperatures. t Adjust the exposure value. (p. 54)

The memory card has The memory card has not been reset. t Make sure that the camera is correctly
an error Format the card. (p. 87) connected to the external monitor with
The TV does not
the A/V cable.
If you change the name of a file, your display your photos
t Make sure that your memory card
camera may not play the file (the name of
contains photos.
Cannot play back files the file should meet the DCF standard). If
you encounter this situation, play back files t Make sure that the USB cable is
on your computer. connected correctly.
Your computer does
t Make sure that the focus option you set t Make sure that your camera is switched
not recognize your
is suitable for close-up shots. (p. 47) on.
camera
t Make sure that the lens is clean. If not, t Make sure that you are using a
The photo is blurry supported operating system.
clean the lens. (p. 91)
t Make sure that the subject is within Your computer The file transmission may be interrupted by
range of the flash. (p. 99) disconnects the camera static electricity. Disconnect the USB cable
while transferring files and connect it again.
An incorrect white balance can create
The colors in the photo
unrealistic color. Select the proper white
do not match the actual
balance option to suit the light source.
scene
(p. 55)

Appendixes 97
Before contacting a service center

Situation Suggested remedies


t You can play videos only with the Intelli-
studio program. Install the program on
Your camera cannot
your computer. (p. 79)
play videos
t Make sure that the USB cable is
connected correctly.
t End Intelli-studio and restart the program.
t You cannot use Intelli-studio on
Macintosh computers.
t Make sure that the PC Software is set
to On in the settings menu. (p. 89)
Intelli-studio is not
functioning properly t Depending on your computer's
specification and environments, the
program may not launch automatically.
In this case, click Start “ My
Computer “ Intelli-studio “ iStudio.
exe on your computer.

Appendixes 98
Camera specifications

Image sensor Shutter speed


Type 1/2.33" (Approx. 7.79 mm) CCD t Auto: 1/8 - 1/2,000 sec.
t Program: 1 - 1/2,000 sec.
Effective pixels Approx. 12.4 mega-pixels
t Night: 8 - 1/2,000 sec.
Total pixels Approx. 12.7 mega-pixels t Fireworks: 2 sec.
Lens Exposure
Samsung lens f = 4.9 - 24.5 mm Control Program AE
Focal length
(35 mm film equivalent: 27 - 135 mm)
Metering Multi, Spot, Center-weighted, Face Detection AE
F-stop range F3.5 (W) - F5.9 (T)
Compensation ±2EV (1/3EV steps)
t Still image mode: 1.0X - 5.0X
Digital zoom ISO equivalent Auto, 80, 100, 200, 400, 800, 1600, 3200
t Play mode: 1.0X - 12.5X (depending on image size)
Display Flash

Type TFT LCD Mode Off, Auto, Red-eye, Fill in, Slow Sync, Red-eye Fix

t Main Display: 3.0" (7.6 cm) QVGA (230 K) t WIDE: 0.2 m - 3.4 m (ISO Auto)
Feature Range
t Front Display: 1.5" (3.8 cm) 61 K TFT LCD t TELE: 0.5 m - 2.0 m (ISO Auto)

Focusing Recharging time Approx. 4 sec. (depending on battery condition)

TTL auto focus (Multi AF, Center AF, Face Detection Shake reduction
Type
AF, Tracking AF, Smart Face Recognition AF) DUAL IS [Optical Image Stabilization (OIS) +
Wide (W) Digital Image Stabilization (DIS)]
Tele (T)
Normal 80 cm - infinity 1 m - infinity
Range
Macro 5 cm - 80 cm 1 m - 1.5 m
Auto Macro 5 cm - infinity 1 m - infinity

Appendixes 99
Camera specifications

Effect t Modes: Smart Scene Detection (Landscape,


t Photo Style Selector: Normal, Sketch, Blue Sky, Natural Green, Sunset Sky), Movie
Defog, Soft, Vivid, Forest, Retro, Cool, Calm, t Format: H.264 (MPEG-4, AVC) (Max recording
Classic, Negative, Custom RGB time: 20 min)
Shooting mode t Size: 1280 X 720 HQ (30 FPS, 15 FPS),
t Image Adjust: Sharpness, Contrast, Saturation
t Smart Filter: Normal, Miniature, Vignetting, 1280 X 720 (30 FPS, 15 FPS), 640 X 480 (30 FPS,
Fish-eye 1, Fish-eye 2 Videos 15 FPS), 320 X 240 (60 FPS, 30 FPS, 15 FPS)
t Frame Rate: 60 FPS, 30 FPS, 15 FPS
White Balance t Voice: Off, On (sound is muted when operating the
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, zoom function)
Custom Set t OIS: On, Off
t Video editing (embedded): Pause during recording,
Date Imprinting
Still image capture, Time trimming
Date & Time, Date, Off
Playback
Shooting
Single image, Thumbnails, Multi slide show,
t Modes: Smart Auto (White, Macro Color, Fireworks, Movie clip, Smart Album
Type
Portrait, Night Portrait, Backlight Portrait, Macro * Smart Album category: Type, Date, Color, Week,
Portrait, Backlight, Landscape, Action, Tripod, Face
Night, Macro, Macro Text, Blue Sky, Sunset,
Natural Green), Auto, Program, DUAL IS, Beauty Edit Resize, Rotate, Photo Style Selector, Image Adjust
Photos Shot, Night, Scene (Frame Guide, Portrait,
Landscape, Close Up, Text, Sunset, Dawn,
Backlight, Fireworks, Beach & Snow)
t Drive: Single, Continuous, Motion Capture, AEB
t Timer: 10 Sec, 2 Sec, Double, Jump Shot

Appendixes 100
Camera specifications

t Photo Style Selector: Normal, Sketch, For 1GB microSDTM


Defog, Soft, Vivid, Forest, Retro, Cool, Calm,
Super Fine Fine Normal
Classic, Negative, Custom RGB
4000 X 3000 145 281 399
Effect t Image Adjust: ACB, Red-eye Fix, Face Retouch,
Brightness, Contrast, Saturation, Add Noise 3984 X 2656 166 310 436
t Smart Filter: Normal, Miniature, Vignetting, 3840 X 2160 200 363 522
Fish-eye 1, Fish-eye 2 3264 X 2448 209 370 531
Image size 2560 X 1920 335 560 783
Voice recording
2048 X 1536 526 793 1,053
t Voice Recording (Max 10 hours)
1920 X 1080 860 1,131 1,421
t Voice Memo in a photo (Max. 10 sec.)
1024 X 768 1,455 1,651 1,851
Storage
These figures are measured under Samsung’s standard
t Internal memory: Approx. 30 MB conditions and may vary depending on shooting conditions
t External memory (Optional): and camera settings.

Media - microSDTM card (up to 2 GB guaranteed) Interface


- microSDHCTM card (up to 8 GB guaranteed)
Internal memory capacity may not match these Digital output
USB 2.0
specifications. connector

t Photo: JPEG (DCF), EXIF 2.21, DPOF 1.1, Audio output Mono (Internal speaker), Mono (Microphone)
PictBridge 1.0
File format t A/V: NTSC, PAL (selectable) SCC-AV20
t Video: H.264 (MPEG-4.AVC) Video output
t HDMI 1.4: NTSC, PAL (selectable)
t Audio: WAV
DC power input
20 pin, 4.4 V
connector

Appendixes 101
Camera specifications

Power source
Rechargeable
Lithium-ion battery (SLB-07, 760 mAh)
battery

The power source may differ depending on your region.

Dimensions (W x H x D)
99.2 x 59 x 19.9 mm
Weight
136.6 g (without battery and memory card)
Operating temperature
0 - 40˚ C
Operating humidity
5 - 85 %
Software
Intelli-studio
Specifications are subject to change without prior notice.

Appendixes 102
Correct Disposal of This Product Correct disposal of batteries in this product
(Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European
countries with separate battery return systems)
(Applicable in the European Union and other European
countries with separate collection systems) This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
This marking on the product, accessories or literature indicates that household waste at the end of their working life. Where marked, the
the product and its electronic accessories (e.g. charger, headset, USB chemical symbols Hg, Cd or Pb indicate that the battery contains
cable) should not be disposed of with other household waste at the mercury, cadmium or lead above the reference levels in EC Directive
end of their working life. To prevent possible harm to the environment 2006/66. If batteries are not properly disposed of, these substances
or human health from uncontrolled waste disposal, please separate can cause harm to human health or the environment.
these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users To protect natural resources and to promote material reuse, please
should contact either the retailer where they purchased this product, separate batteries from other types of waste and recycle them through
or their local government office, for details of where and how they can your local, free battery return system.
take these items for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should
not be mixed with other commercial wastes for disposal.
This Class [B] digital apparatus complies with Canadian
ICES-003.
Samsung Eco-mark
It is Samsung’s own symbol mark is used to
effectively communicate Samsung’s environmental
friendly product activities to the consumers. The
mark represents Samsung’s continuous effort on
development of environmental conscious products.

Appendixes 103
Index
A B Cleaning E
Body 91
ACB Battery Editing 70
Display 91
in Playback mode 73 Charging 94
Lens 91 Enlarging 66
in Shooting mode 54 Life 93
Specifications 93 Couple mode 38 Error messages 90
Adjusting
Brightness 73 Beauty Shot mode 32 Exposure 54
Contrast
Blink detection 51 D
in Playback mode 73
in Shooting mode 60 Date and time 87 F
Burst
Saturation Auto Exposure Deleting files 65 Face detection
in Playback mode 73 Bracket (AEB) 57 Blink Detection 51
in Shooting mode 60 Demo mode 89
Continous 57 Normal 50
Sharpness 60 Digital Image Stabilization 33
Motion capture 57 Smart Face Recognition 52
AF Lamp 88 Digital zoom 24 Smile Shot 51
AF Sound 86 C Disconnecting the device 81 Facial brightness 32
Anynet+ 88 Camera shake 26 Display brightness 86 Facial imperfections 32
Aperture 31 Capturing an image Display type 21 Flash
from a video 68 Auto 46
Auto Contrast Balance DPOF 74
(ACB) 54 Children mode Fill in 46
Photo 38 Dual IS mode 33 Off 45
Auto mode 22
Video 39 Red-eye 46
Red-eye Fix 46
Slow Sync 46

Appendixes 104
Camera specifications

Focus area I M N
Center AF 49
Icons 18 Macro 47 Navigation button 14
Multi AF 49
Tracking AF 49 Image adjust Maintenance 91 Night mode 31
ACB 73
Focus distance Memory card
add noise 73
Auto Macro 47 Capacity 92 O
brightness 73
Macro 47 microSD 92
contrast 73 Optical Image Stabilization
Normal (AF) 47 MENU button 14 (OIS) 24, 33
face retouch 73
Format 87 red-eye fix 73 Metering
Frame guide 31 saturation 73 Center-weighted 55 P
Imprint 88 Multi 55
Frame rate 34 Photo quality 42
Spot 55
Front display Intelli-studio 79 Photo styles
Mode dial 14
Camera layout 13 ISO speed 46 in Playback mode 71
Demo mode 89 Movie mode 34 in Shooting mode 58
Shooting mode 37 Muting Playback button 16
Turning on 23
J
Camera 16
Jump shot 44 Playback mode 62
Function button 14 Video 35
Printing photos 83
Function description 86 My Star
L Canceling faces 63 Print order 74
Light source Ranking 63 Program mode 34
H (White balance) 55 Registering faces 53
Protecting files 65
Half-pressing 6
Long time shutter 31
HDMI Size 88
HDTV 75
Appendixes 105
Camera specifications

Q S Slide show 67 V
Quick View 87 Scene mode 30 Smart Album 63 Video
Smart Auto mode 29 Playing 68
Self-portrait mode
Recording 34
R Photo 37 Smart Face Recognition 52
Video 39 Video Out 88
Recording Smart filter effect
Video 34 Service cener 96 in Playback mode 72 Viewing files
Voice memo 40 in Shooting mode 59 as thumbnails 64
Settings
by category 63
Red-eye Accessing 85 Smart Scene Detection on TV 75
in Playback mode 73 Camera 87 mode 36
Slide show 67
in Shooting mode 45 Display 86
Smile shot 51
Sound 86 Voice memo
Reset 87 Start image 86 Playing 69
Shooting mode
Resizing 70 Recording 40
Auto 22
Resolution Beauty Shot 32 T Volume 86
Photo 42 Dual IS 33 Timer 43
Video 42 Movie 34
Tracking focus 48 W
RGB tone Night 31
Program 34 Transferring files White Balance 55
in Playback mode 71
in Shooting mode 58 Scene 30 for Mac 82
Smart Auto 29 for Windows 77
Rotating 70 Z
Shutter speed 31
Zoom button 14
Zooming 23

Appendixes 106
Please refer to the warranty that came with your product or
visit our website http://www.samsungimaging.com/ for after-
sales service or inquiries.

Você também pode gostar