Escolar Documentos
Profissional Documentos
Cultura Documentos
Data Plan
Broadband
Item
Data
0/6/0
UPLINK PORT
VLAN
TRAFFIC PROFILE
Narrowband (POTS)
Item
Data
0/11
UPLINK PORT
VLAN
Protocol
H248
Site IP (PVMD)
IP address: 10.227.225.61
Gateway
IP address: 10.227.225.126
Signaling IP
10.225.225.61
Signaling Gateway IP
10.225.225.126
Media IP
10.226.225.61
Media Gateway IP
10.226.225.126
Local IP SS1
10.225.12.33
Local IP SS2
10.225.4.33
Normal POTS
Script
MGW
Subscriber No.
TID
HW UA
No need to configured
A1100
No need to configured
A1101
No need to configured
A1102
Broadband Configuration
IMPORTANT Instruction!!
1. Please change the value in RED BOLD below according to each site. The
<blue> color is the explanation/description for your reference
2. DO NOT copy and run it ALL AT ONE TIME as it may cause your terminal
hang.
3. Please CHECK AND MAKE SURE the software version of UA5000 is
V100R019C00 SPC100 SPH103.
STEP 1: Configure uplink port. Create VLAN and bind to uplink port
UA5000
UA5000
UA5000
0/2/0
UA5000
0/2/0
UA5000
UA5000
UA5000
assigned automatically
// Example for Line Profile 8MB
SPG_V0312(config)#adsl line-profile add
{ <cr>|profile-index<L><2,999> }:
Command:
adsl line-profile add
Start adding profile
Press 'Q' to quit the current configuration and new configuration will be
neglected
>Do you want to name the profile (y/n) [n]:y
>Please input profile name:DSL8192 // Profile name depends on
speed package
> Please choose default value type 0-adsl 1-adsl2+ (0~1) [0]:1
> Will you set basic configuration for modem? (y/n)[n]:n
> Please select channel mode 0-interleaved 1-fast (0~1) [0]:1
>Please select form of transmit rate adaptation in downstream:
> 0-fixed 1-adaptAtStartup 2-adaptAtRuntime (0~2) [1]:1
> Will you set SNR margin for modem? (y/n)[n]:n
> Will you set parameters for rate? (y/n)[n]:y
> Minimum transmit rate in downstream (32~32000 Kbps) [32]:32
> Maximum transmit rate in downstream (32~32000 Kbps) [24544]:8192
> Minimum transmit rate in upstream (32~6000 Kbps) [32]:32
> Maximum transmit rate in upstream (32~6000 Kbps) [1024]:512
Add profile 12 successfully
// Line-Profile index will be
assigned automatically
STEP 8: Activate all ports with ADSL line profile 1 and deactivate all
ports for commercial.
UA5000 (config)# interface adsl 0/9
UA5000 (config-if-adsl-0/9)# deactivate all
UA5000 (config-if-adsl-0/9)# activate all profile-name 1M // Line-profile
name as configured
UA5000 (config-if-adsl-0/9)# quit
UA5000 (config)# interface adsl 0/9
UA5000 (config-if-adsl-0/9)# activate 0 profile-name 2M // activate port by
port based on Line-profile
UA5000 (config-if-adsl-0/9)# activate 1 profile-name 2M
UA5000 (config-if-adsl-0/9)# quit
//Repeat it for every service slot until the last service slot.
STEP 9: Enable security parameters
UA5000 (config)# security anti-dos enable
UA5000 (config)# autosave interval 1440
29
30
31
32
33
34
35
------------------------------------------------------------------------STEP 15: Reboot System
UA5000 (config) reboot system
Narrowband
At IPMD
STEP 1: Configure uplink port. Create VLAN and bind to uplink port
UA5000_IPM
UA5000_IPM
UA5000_IPM
UA5000_IPM
UA5000_IPM
0/2/0
UA5000_IPM
0/2/6
UA5000_IPM
0/2/7
UA5000_IPM
0/2/0
UA5000_IPM
0/2/6
UA5000_IPM
0/2/7
UA5000_IPM
0/2/0
UA5000_IPM
0/2/6
UA5000_IPM
0/2/7
UA5000_IPM
0/2/6
UA5000_IPM
0/2/7
At IPMD
//Configure IP Route Static for EMS VLAN 201/200
UA5000_IPM (config)# ip route-static 0.0.0.0 0.0.0.0 10.227.225.126 //depend
on gateway IP given by TM
At PVMD
//Adding SNMP configuration at PVMD
UA5000_PVMD(config)#snmp-agent community read public
UA5000_PVMD(config)#snmp-agent community write private
UA5000_PVMD(config)#snmp-agent target-host trap address 10.14.58.7
securityname PVMD_BMS_VF5001 v1
UA5000_PVMD(config)#snmp-agent target-host trap address 10.41.58.10
securityname PVMD_BMS_VF5001 v1
UA5000_PVMD(config)#snmp-agent trap enable standard
//Configure IP Address Pool for VLAN 200/201 at PVMD
UA5000_PVMD(config)#display current-configuration section eth
{ <cr>||<K> }:
Command:
display current-configuration section eth
[UA5000PVMV100R017: 6202]
#
[eth]
<eth>
interface eth
ip address 172.20.1.2 255.255.0.0 172.20.1.1 // Need to modify this IP
for VLAN 200/201
ip address 10.225.225.61 255.255.255.128 10.225.225.126 vlan_tag 800
ip address 10.226.225.61 255.255.255.128 10.226.225.126 vlan_tag 900
ip address 1.1.1.1 255.255.0.0 1.1.1.2 vlan_tag 2 // configure for
maintenance purpose
#
return
UA5000_PVMD(config)#interface eth
UA5000_PVMD(interface-eth)#ip modify
{ ip_address<I><X.X.X.X> }:172.20.1.2
{ gateway<K>|ip_address<K>|submask<K>|vlan_tag<K> }:ip_address
{ ip_address<I><X.X.X.X> }:10.227.225.61
{ <cr>|gateway<K>|submask<K>|vlan_tag<K> }:submask
{ submask<M><X.X.X.X> }:255.255.255.0
{ <cr>|gateway<K>|vlan_tag<K> }:gateway
{ gateway<I><X.X.X.X> }:10.227.225.126
{ <cr>|vlan_tag<K> }:vlan_tag
{ vlan_tag<U><0,4095> }:201
Command:
ip modify 172.20.1.2 ip_address 10.227.225.61 submask
255.255.255.0
gateway 10.227.225.126 vlan_tag 201
STEP 7: Save Data
UA5000_PVM (config)# save
STEP 8: Final check for Narrowband service
// Check software version
UA5000_PVM (config)#display language
Local:
Description: CHINESE SIMPLIFIED (DEFAULT LANGUAGE)
Version:
UA5000PVMV100R017C02SPC500
General:
Description: ENGLISH (DEFAULT LANGUAGE)
Version:
UA5000PVMV100R017C02SPC500
// Check patch
UA5000_PVM (config)#display patch all
Software Version:UA5000PVMV100R017C02B062
-----------------------------------------------------------------------Current Patch State:
-----------------------------------------------------------------------Patch Name
Patch State
Delivery
Attribute
-----------------------------------------------------------------------SPC500
running
common
cold patch
SPH525
running
common
hot patch
-----------------------------------------------------------------------Total:2
Patches in the system cannot be rolled back
// Check control board version
UA5000_PVM (config)#display version 0/4
--------------------------------------Pcb
Version: H601PVMD VER.B
Base Bios
Version: 804
Extend Bios Version: 809
Software
Version: UA5000 V100R017
Dependency
NO
NO
CPLD
Version: 111
FPGA
Version: 118
NOD
Version: 110
Voice
Version: 012
--------------------------------------SubBoard[0]
:
Miro
Version: v7_17_06_07
--------------------------------------SubBoard[1]
:
Miro
Version: v7_17_06_07
--------------------------------------// Check Service Card version
UA5000_PVM (config)#display version 0/11
PCB
Version: Software Version: 2b
Logic Version: // Check all boards condition
UA5000_PVM (config)#display board 0
------------------------------------------------------------------------SlotID BoardName Status
Sub0
Sub1
Online/Offline
------------------------------------------------------------------------0
PWX2
Normal
1
PWX2
Normal
2
3
4
H601PVMD Active_normal H602ETCA
5
H601PVMD Standby_normal H602ETCA
6
7
8
9
10
11
A32
Normal
12
A32
Normal
13
A32
Normal
14
A32
Normal
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
-------------------------------------------------------------------------