Escolar Documentos
Profissional Documentos
Cultura Documentos
Ceramic
Tiles,
Terrazzo
Tiles
and
Mosaics
Method
Statement
This procedure outlines the system of control and inspections to be adopted for the fixing
on site of tiles and mosaics.
SECTION:
FINISHING
DATE
OF
ISSUE
Dec. 2012
BY:
SUBJECT:
QA/QC ENGINEER
Ceramic Tiles, Terrazzo Tiles
And Mosaics Method
Statement
APPROVED
BY:
QEHS MANAGER
ACTION
VERIFY
1.
SCOPE
Project
PROCEDURE
.1 A
statement
prepared
approved.
include:
Storemethod
shall be keeper
and
It
shall
Project
Manager
i) Acceptance
conditions
for
laying
e.g. Project
maximum
moisture content
of
substrate, Engineer
levelness,
soundness,
cleanliness,
environment.
ii) Surface
preparation and
bonding
e.g.
bonding agent,
bed
mix
proportions,
Method
Statement
Sample
approval
Instructions
FINI/05/A
FINI/05/A
adhesives.
iii) Specific
requirements
with regard to
setting
out,
alignment
of
joints and cutting.
iv) Method of
protecting
finished
work.
v) Source
documents
for
tiles,
adhesive
.2 A sample of tiles
shall be prepared on the
wall in accordance with
the specifications laid
down in the contract
and approved by the
Consultant.
.3
Storage of tiles:
i) Tiles shall be
delivered to site
palletised, on a
clean
hard
surface free from
contamination by
mud or surface
water.
.4 The
Project
Director/Manager or his
designate will confirm
that materials are in
compliance
with
contract
specification
requirements.
.5 In the case of
internal wall tiling, work
will not proceed until all
concealed
conduits,
pipes, electrical cables
and boxes etc. that
penetrate the tiling have
been fixed securely in
position and making
good
is
complete.
Obtain written clearance
from MEP Co-ordinator
that all their works in
that area is clear for
taking up the tiling work.
SECTION:
DATE
OF
ISSUE
FINISHING
Dec. 2012
BY:
SUBJECT:
QA/QC ENGINEER
APPROVED
BY:
VERIFY
FINI/05/A
FINI/05/A
v) The sequence of
fixing tiles shall be as
follows
unless
specified otherwise in
the
contract:
Internal
walls
External
walls
preferably to be
done
in
bays.
vii) Before
placing
the next tile take care
to allow correct joint
width by placing the
correct spacers in all
corner
joints.
.7 Protection
Cleaning:
and
i) Protect
external
tiling and mosaics
from rain and sun until
the bed and joints
have set. Continue the
protection
for
the
period specified.
SECTION:
DATE OF ISSUE
FINISHING
Dec. 2012
BY:
SUBJECT:
QA/QC
ENGINEER
APPROVED BY:
CERAMIC TILES, TERRAZZO TILES AND MOSAICS
QEHS
MANAGER
ACTIO
N
VERIF
Y
SITE NO.:
Sheet No.
SUBCONTRACTOR:
CLIENT
Checke
d
STAGE
ITEM
DATE
by
PREPARATIO
N
PE
2. Materials to specification
(including suitability of adhesive).
SE
SK
SU
GF
PE/MEP
7. Acceptance of substrate
GF
PE
QA/QC
SU
SU
GF
SE
APPROVAL TO PROCEED
QA/QC
POST
GF
GF
CM