Escolar Documentos
Profissional Documentos
Cultura Documentos
Page 1 of
5
FACE MASTER
2.0
TECHNICAL SPECIFICATION
Page 2 of
5
FACE MASTER
2.0
DESCRIPTION
Mesh handler with wire mesh in roll, prepared for side bolting.
Mine Master is constantly striving to improve its products and must therefore reserve the right to change designs, materials, specifications and price without notice.
TECHNICAL SPECIFICATION
Page 3 of
5
FACE MASTER
2.0
Mesh handler with wire mesh in roll, with roll mesh on hooks (preparation step).
MAIN COMPONENTS
Boom with Mast
Diesel engine
Tires
FEATURES
WEIGHT
28 500 kg
DIMENSIONS
Length
12 250 mm
Width
2600 mm
Height
2300 mm
Turning radius
Ri = 3500 mm
Ro= 6300 mm
Mine Master is constantly striving to improve its products and must therefore reserve the right to change designs, materials, specifications and price without notice.
TECHNICAL SPECIFICATION
Page 4 of
5
FACE MASTER
2.0
WORKING UNIT
BOOM
Boom extension
Lifting angle
Boom lift
Swing angle
Canopy
Working platform
Platform extension
Extra feature
MAST
Type
Feed force
Feed
Tilt
Telescopic Fletcher
Roof referenced mast with hydraulic drill guide, to accommodate
2.6 meter feed length. Mast turned with drifter facing
operator.
0-3182 kg
0 9,14 meter per minute
270 of mast tilt: +/- 135 (left / right)
Control panel
Extra feature
ROCKDRILL
Impact power
Percussion pressure
207 bar
Percussion flow
57 l/min
Rotation pressure
Rotation flow
Drill steel connector
Rotation
70 bar
75 l/min
R32
380 RPM
CARRIER
Diesel engine
Tramming
Articulation
Brakes
Transmission
Mine Master is constantly striving to improve its products and must therefore reserve the right to change designs, materials, specifications and price without notice.
TECHNICAL SPECIFICATION
Page 5 of
5
FACE MASTER
2.0
Axles
Tires
14.00 x 20
Fuel tank
90 l
24 V
2 x 12 V
Battery
4 x 35 W, LED type
Driving lights
Max. speed on flat surface
18 km/h
Woerner
HYDRAULIC SYSTEM
Gear
Hydraulic pumps
Pressure
Tank of oil with oil level
indicator, return filter
Filtration
300 l
10 m
HV 68
Hydraulic oil
ELECTRICAL SYSTEM
55 kW
Motor
400 V, 50Hz
Voltage
Working lights
Start - up
OPTIONAL EQUIPMENT
FIRE SUPPRESSION SYSTEM WITH
FLAME DETECTION
AIR - CONDITION for bolting
operation
BY PASS FILTRATION
Mine Master is constantly striving to improve its products and must therefore reserve the right to change designs, materials, specifications and price without notice.