Você está na página 1de 2

OPaver MP Grid Unique Cylindrical Shape for High Load Capacity

USA OPaver MP Grid is made from High Density Polypropolenene plastic. The plastic used is
100% recycled and made from non-petroleum based resins that remain chemically stable for the life
of the product. Each panel is engineered with cylindrical cells and unique design elements allowing for
the greatest load capacities. Each OPaver MP Grid panel is shipped assembled in a 2 x 4 grid
consisting of four sub-panels.
Assembly is simple and by the unique fastener system engineered into the panels allows for quick
assembly of large amount of square footage reducing labor time.

OPaver MP Grids:
Sub Panel size: 12x24 by 1.625 height
Completed panel (shipping size) 24x 48 by 1.625 height
OPaver MP Grid drainage feature for turf, drainage and erosion control applications.
OPavers MP are designed to allow for drainage through cells into sub-base material and between
cells through drainage features in cell walls to allow water to flow evenly throughout the system to
prevent pooling if stoppage should occur in a localized area. USA OPavers MP are designed to be
installed for erosion control on steep grades and contain specially designed staking locations for
grades steeper than 10 degrees.

OPaver MP Grid Construction Properties


The OPaver MP Grid is made from Industrial Grade Polypropylene.
Polypropylene is not susceptible to environmental breakdown under normal conditions as it will not
react with organic compounds found in soil. UV stabilizers linked within the polymer will prevent
degradation due to prolonged exposure to sunlight. In addition, polypropylene is among the most
stable thermoplastics when it comes to accidental exposure to industrial and automotive solvents and
petroleum based products that may be spilled on paved surfaces. Polypropylene can withstand
extreme temperatures on both ends of the spectrum and thermal cycles will not affect the longevity of
the material. Structurally, OPaver MP Grid are designed to control the aggregate substrate so that
the aggregate cannot migrate as a load is applied, but instead transmit the load directly to the base
layer. The unique web design of the OPaver MP Grid system allows the grid to flex in case of direct
load and also works to distribute any collateral force within the entire grid to prevent localized stress
that can weaken some competitive products.

[PP] Polypropylene
Polypropylene is not susceptible to environmental breakdown under normal conditions as it will not
react with organic compounds found in soil. UV stabilizers linked within the polymer will prevent
degradation due to prolonged exposure to sunlight. In addition, polypropylene is among the most
stable thermoplastics when it comes to accidental exposure to industrial and automotive solvents and
petroleum based products that may be spilled on paved surfaces. Polypropylene can withstand
extreme temperatures on both ends of the spectrum and thermal cycles will not affect the longevity of
the material.
The USA EcoSystems OPaver MP (multi-purpose) Grids feature an eco-friendly cellular Porous
paving plastic grid Mississippi system that is economical, easy to install and versatile. Our Porous
paving plastic grid Alabama are made with 100% poly propylene recycled plastic.

Você também pode gostar