Escolar Documentos
Profissional Documentos
Cultura Documentos
mbf-40 series
PRODUCT BENEFITS
Convection cooling
single band
dual Band
Tri band
The technical performances for each band are found on the back of this data sheet. Regardless of the
MBF-40 repeater version (single, dual or tri band) these high performances remain constant.
SPECIFICATIONS
Frequency Range
E-GSM
GSM 1800
WCDMA 2100
Bandwidth/power
Operational bandwidth
Composite output power (DL)
UPLINK
880 - 915 MHz
1710 - 1785 MHz
1920 - 1980 MHz
E-GSM
35 MHz
+37 dBm*
DOWNLINK
925 - 960 MHz
1805 - 1880 MHz
2110 - 2170 MHz
GSM1800
WCDMA2100
75 MHz
60 MHz
+37 dBm*
+39 dBm
(for PAR of 8.5 dB)
* in repeaters that share a common downlink fibre for 900MHz and 1800MHz a minimum of 4 carriers in each band is required for
the full composite output power to be attainable maintaining full ETSI compliance.
Noise figure
3 dB typical (maximum gain)
Propagation delay
< 2 s
Modulation Accuracy at nominal output power
GSM/GMSK
< 2.5 RMS and < 10 peak
EDGE/8-PSK
< 3 % EVM RMS
WCDMA/EVM
< 12.5 % RMS (composite according to ETSI TS 25.106 with TM 1 / 64 DPCH)
PkCDE
< - 33 dB (according to ETSI TS 25.106 with TM 1/64DPCH and spreading factor 256)
Gain UL/ DL
Adjustable, in 1 dB steps.
System impedance
50
Return loss at antenna connections
>14 dB
Antenna connectors
DIN 7/16
Electrical ratings
230 VAC 50Hz, 115 VAC 60 Hz, - 48 VDC
Power Consumption
single Band
Dual band
Tri band
140W
220W
350W
Mechanical
single Band
Dual band
Tri band
Dimensions
540 x 382 x 198 mm
540 x 382 x 198 mm
540 x 382 x 313 mm
Weight
20 kg
22 kg
33 kg
Enclosure
Aluminium (IP 65)
Environmental
EMC
See compliance below
Operating Temperature
- 25 to + 55 C
Storage
- 30 to + 70 C
Humidity
ETSI EN 300 019-2-4 (see compliance below)
MTBF
> 100 000 hrs
Complies in applicable parts, relevant on
R&TTE Directive including
ETS EN 301 502 ( ETS EN 300 609-4 / GSM 11.26 )
different markets, to:
ETSI TS 25.106,ETSI 25.143
ETSI EN 301 908-11
ETS EN 301 498-8,
EN 60 950, EN 50 385
www.axellwireless.com