Escolar Documentos
Profissional Documentos
Cultura Documentos
Image 1
1) What is the reason for the worker not wearing safety glasses while he is sawing?
(Wear safety glasses, goggles or a face shield at all times while using the saw.)
2) Why isnt the worker wearing a dust mask? (If the cutting operation is dusty, wear a
dust mask.)
3) Why is the man position in line with the blade? (Position your body so that it is NOT
in line with the blade. This is to avoid being injured by flying sawdust, woodchips or
the work.)
4) Why is the height of the blade higher than the stock being cut? (The height of the
blade should be set just slightly higher than the stock being cut. It should never be more
than 6mm above the height of the stock. This is to ensure that if your hand slip you only
receive a slight cut and do not lose a limb.)
5) Why isnt the worker standing firmly on the table/floor? (Always stand firmly on the
floor/table and avoid any awkward operations. This is to avoid falling into the blade by
slipping or losing your balance.)
6) Why isnt the man paying attention to the work? (Do not carry on a conversation
while cutting. Pay attention to the work being performed.)
7) Why is the worker reaching over the blade? (Do not reach behind or over the blade
unless it has stopped turning.)
Image 2
1) What is the reason for the worker not wearing safety glasses while he is sawing?
(Wear safety glasses, goggles or a face shield at all times while using the saw.)
2) Why isnt the worker wearing a dust mask? (If the cutting operation is dusty, wear a
dust mask.)
3) Why is the man position in line with the blade? (Position your body so that it is NOT
in line with the blade. This is to avoid being injured by flying sawdust, woodchips or
the work.)