Você está na página 1de 4

Manufacturer of Welded Wire Mesh, Concertainer Barriers & Gabions

ABOUT CONCERTAINERS BARRIERS:


Concertainer Barriers has been designed to reduce the logistical burden of supporting force protection missions on
expeditionary operations, such as the construction of forward operating and petrol bases.
The protection of civil society against the threat posed by terrorist bombers includes not just the direct protection of life
and limb, but also the protection of the infrastructure upon which the comfort and sometimes also the wealth, health
and lives of the people depends, and of those physical embodiments of the history, values the traditions of the nations
or the people.
Forces are aware that in addition to defending against remotely launched missiles, suicide attacks, they must defend
against the entry or approach of unauthorized vehicles to defended facilities. This achieved in two ways; first, by
entry control at well-defended locations and second, by physically prevent entry in other areas.
The primary advantage of Concertainer over other force protection systems is its ability to utilize locally available fill
material to rapidly construct defense walls with minimal manpower and resources.
It is possible to design and construct walls that give complete protection from small arms, cannon, mortars and shrapnel
and fragmentation from larger types of shells or bombs. It is not possible to build structure to totally protect against the
effects of blast from larger explosive devices.
However, the construction of a competent defense wall may substantially reduce the blast effects. One of the main aims
in constructing defense walls must be to put distance between the target and the potential site of charge initiation.
For many applications a single course of the appropriate size of Concertainer is the most effective solution in providing a
protective structure. For higher walls, stacking of units is generally the solution. As a general guideline, walls should
never be higher than twice the base width. For higher walls, stacking unit in a pyramid is the answer in achieving greater
heights.
Fill Material Required:
The fill material required will influence the minimum thickness required of the wall. There are two approaches; first by
using available fill. This is the usual method for field survivability structures. In this case, lower quality fill may increase
the minimum thickness required in the design.

Second, for structures with a longer required service life or where site constraints may preclude thickening the wall, fill
may have to be selected or engineered for particular structure. For the most effective fill, a sand gravel mix with little or
no fine material may have to be acquired. As this ideal material does not normally occur naturally, it may have to be
created using crushed and screened material,
Conclusion:
Concertainer can provide proven protection from small arms and fragmentation, and also provide mitigation from blast.
The design of Concertainer structures is a relatively straightforward process which takes into account perceived threat
and target to be protected.

Sizes:

As per NATO Standards

Also manufacture as per customer requirement.

Material Specification:
Wire Thickness: 8 & 6 Gauge (4 & 5mm) steel
Mesh Size:

8cm (80mm) x 8cm (80mm)

Joining Springs: 8 & 6 Gauge (4mm) hard steel and 10 Gauge (3mm) hard steel
Joining Pins:

8 Gauge (4mm) hard steel.

Geotextile:

0.8 (2mm) non-woven polypropylene.

(NOTE)

Wire thickness varies according to the size of Concertainer.

Manufacturer of Welded Wire Mesh, Concertainer Barriers & Gabions

For Concertainer Barriers Contact:

Syed Imran Ali


Cell:

+92-300-2202631
+92-346-8202631

Email:

psp_pk@hotmail.com

Cell:

+92-333-3585335

M.Saad Shamsi

+92-321-2419308
Email:

pes.pk@live.com
info@stonemesh.com.pk

Office:
Phone:

+92-213-6823065

Web:

www.stonemesh.com.pk

Pakistans Largest Manufacturer & Exporter of Welded Wire Mesh, Concertainer Barriers & Gabions

Você também pode gostar