Escolar Documentos
Profissional Documentos
Cultura Documentos
User manual
Ver: 6/8/2010
1. System Requirement-------------------------------------------------------------------P04
2. Installation ------------------------------------------------------------------------------------------P04
2.1 Install IIS(very important)----------------------------------------------------------------------P04
2.2 Install Alarm Receiving center-----------------------------------------------------------------P05
2.3 Install Service ------------------------------------------------------------------------------------P05
2.4 Install softdog driver ----------------------------------------------------------------------------P06
7. FAQ-----------------------------------------------------------------------------------------------------P20
Dear users,
1. System Requirement
1.1 Operating systemwindows 2000windows XPwindows2003 or above
1.2 Necessary toolsMicrosoft .NET Framework 2.0 or above and Internet Information Services
(IIS)
2.Installation
2.1 Install IIS
Installation package content as below:
Quick installation
Runautorun.exe, Pop-up the window as below
Note: If you already have IIS server, please do not re-install, otherwise it will lead to the existing
site can not run properly.
"2. Install
Note: virtual directory is
AlarmAlarmSystem,
Center"
can be
screen,modified.
click
The default
"Next"website
url:
http://localhost/AlarmSystem
Installing, please
Then Click "Next"
wait...
2.
3
Installation is complete.
Please install the service
Start Service
2.4
Install
softdog
driver
Click
the
installation completed, the web site will automatically open when you close the installation
window.
Hardware installation:
1. GSM receiver module
GSM receiver package
Accessories inside:
Installation:
computer
Turn on GSM module, if the
green LED flash which
between two red LED, it
means OK, if not, please check the SIM card and the antenna install properly.
Click "My Computer" "" Properties "" Hardware "" Device Manager "," port (COM and LPT), to
view the module's port number, different ports have different port number. Such as: Prolific USBto-Serial Comm Port (COM9).
Softdog
Connecting
the
computer,
click
"My Computer" ""
Properties
""
Hardware
""
Device Manager ","
Universal
Serial
Transfer controller,
if
it
display
"SoftDog USB
Device"
that
means
working
properly,
if
not, pls check
whether push
out or the
driver
is
installed.
Website process
The first run of the site operational
procedures:
Login website
Add
Communication
Protocol
Creating Customer
Information
Note:
URL format: http:// server IP address / virtual directory
Virtual directory: "that means virtual directory in the "alarm center setup" .
For example: the server's IP: 192.168.1.223
Virtual directory: alarmsystem
1. If this PC is the server.
Enter for browse "http://localhost/alarmsystem" or "http://192.168.1.223/alarmsystem"
2. If the server in the LAN.
Enter for browse: http//192.168.1.223/alarmsystem
(2) Add GSM communication protocol
Into the "System Setup" page, click on "GSM Alarm Receiver Setup", click "Add" will jump to
the "Communication config add" page, set it according to your need, the default configuration for
the speed is 9600, data bits: 8; Parity Check: none; Stop bit: 1. Phone number is SIM card uumber
in the GSM Alarm Receiver.
For example: The port in device manager before is Prolific USB-to-Serial Comm Port (COM9)
After selection, press confirm to complete the operation.
Go
to
"Open
Alam
System"
page,
click
"Alam
System is
Closed,
Whether
Open
it
or not".
After successful operation, Alarm system will start automatically in10 seconds. Following picture
shows the startup interface
Note: "edit" can only appear when there is a communications protocol, the contents of the serial
port name is the serial port which added before. If you need more ports, click on "Add" in the
section of "communication parameter configuration item"
Please remove the useless serial port, or it may lead to failure of the remote control. If you can not
start the alarm receiver, please check the softdog is inserted, while GSM Alarm Receiver Alarm
cat is connected
Into the "Customer Database" page, click "New" will display the contents under the plan, select
"Host Type", enter "user name", "phone number" and the machine address, click "confirm" to
complete the operation. Example: user host ABC model G11 phone number is 13800138000
within the host, the machine address of the AAA
Note: If the host type is null, please add the "host type"page: System Setup>> Host SettingFor
detail please refer to "4.7.4 Create and change the Host Type/ Control Command."
For more practical system, please fill out optional items.
In the "Client Database" page, click on "Client Settings" will jump to "client settings" page
Note: If the above screen doesn't appear, please check the softdog is plugged in, GSM Alarm
Receiver is configured and whether the number already in "customer database."
The figure after clicking the "red triangle" or click the "fast track"
Click "Remove Alarm" for disarm. Click "Remark" for the history.
Alarm handle:
1.Fast track: Fast handle multiple alarms.
Features navigation
System is based on permissions to restrict the operation, only the user with relevant permissions
can perform the relevant operations, such as: Administrators have the "edit" permission. No "edit"
permission's user only can view the content.
4.Function
of the Software
4.1 Login
1) Administrator login
The Administrator who have different permissions can perform different operations, for example:
User does not have the "edit" permission can not modify the relative information.
2) Client login
Client can only view the their personal alarm records, log regards and personal information; Also
can remote control the system set Remote control function can be set off by system setting
Tick the "Verification", "True" will become "false" , then click "Confirm."
Note: No-password-login client, do not have the "host-password modification " permissions
1. Click in the client (host) icon on the map, you can view the client (host) information, print,
remote control and send Email.
2. Click "Show Mini Navigate Map" which is at the top left corner, then mini map will be shown,
you can jump fast by click the "mini map" to the corresponding position. When alarm, the "mini
map" will appear red dot.
3. Click at the bottom of the page, to check today's alarm record
Note: 1. Client (host): a large map of the inside of the Blue Hawk [disarm] \ Yellow Hawk [arm] \
Red Hawk [alarm]). * Only user with the disarm's permission can remove the alarm.
4.3 Remote Control and Group Remote Control
This
function has two ways to remote or control the host, such as arm\ disarm\ quick arm\ partial arm:
1. In "Remote control" page, choose "phone number," click "Verification," if this phone number
correct, there will appear some corresponds notes below the "comfirm" button. If the Verification
pass, then the user's detector will be auto-loaded.ukuk
2. In "Alarm center" page, you can click the host you want to control on the map.
Click "Remote Control" will jump to "Remote Control" page and fill in phone number, auto-load
"option" and the "arm zone". As the picture below:
4.4
Alarm
Record
4.5
Logs
Log
records
can view
by
clicking
"details," or click "Search" and then choose a period, like the figure below:
Add the new user: Click the button Add, follow the prompt fill all the information.
Edit the users information: click the button Edit, follow the prompt modify the information.
Delete the users information: click the button Delete, then there will be a the dialog box, please
click the OK.
Client Setting: Click Client Setting, there will skip to the setting page. It can
check\add\alter\delete the detector information, modify the clients position (Host) on the large
map (Host distribution) and the position on the mini map (Detector distribution). Pictures as
follow:
The host password is in Client databaseClient SettingChange the password
The initial password is: 1234
If the Host is G60, the password can be changed into 123456.
Setting:
you
can
check\add\alter\delete the detector
information, modify the clients
position (Host) on the large map
(Host distribution) and the
position on the mini map
(Detector distribution).
Client
the
Change the customers backgrounds, login in the alarm center page andYou
findcantheupload
Alarm
JPG/BMP/GIF/PNG
details, you can select the JPG/BMP/GIF/PNG format of the pictures to replaceformats
the olddocuments.
one.
*Change the host password: This change used for the password of remote control host. And only
the super administrator and make the change.
Note: If the host password from the website is different with the password on the host which be
matched, it can not remote control the host.
Click the "Change the alarm position" or "change the detector position", it will change to the
"position change page", like the picture below:
Change the alarm or detector position: Drag the icon to the place you want, then loose the left
mouse button, there will be a dialogue box jump out, if you click "YES," the position will update,
or you can relocation.
Note:
1. Change the alarm position: The icon is the blue hawkyellow hawk or red hawk.
2. Change the detector position: The icon is a red hawk.
System configuration
4.Administrator Information
5.Host Settingadd the host type and the control command.
6.International Telephone Dialing CodeSwift to the international dial code.
7.Database Backup And RestoreDatabase Backup And Restore and set the frequency
of auto-backup.
8.Language optionSwift the English and Chinese options in the system.
9.Regionsadd the countries and areas
10.Remote Control Group frequencyThe default frequency of mass-message under
the control is 10 seconds. Two or more than two sets can turn down the count seconds, if the
count seconds is too low there will be unsuccessful transmit of SMS.
Note: Client Distribution Background Picture: The map in the page of "Alarm center"
4.7.3 Administrator
This system will be distinguished the authorize by administrator-1. Can modify self and other administrator's authorize only when the "Edit permission" is
authorized;
2. Can add the information only when the "Add" is authorized;
3. Can delete the information only when the "Delete" is authorized;
4. Can edit the information only when the "Edit" is authorized;
5. Can add the remote control commands only when the "Add Control Commands" is authorized;
6. Can remote control the alarm host only when the "Remote control" is authorized;
7. Can disarm the host only when the "Disarm" is authorized;
8. Can do the backup of the database only when the "Database backup" is authorized.
Note: Can modify self information and other administrator's right only when the "Edit permission"
is authorized.;
J) FAQ
Question 1: Website usage procedures?
New Client (Host) Register -- Entering Client (Host) detail, Delete / Change Host and Detector's
position -- complete.
[Remark]The default position of host and detector is (1, 1)
Question 2: How to add a new Client (Host)?
Situated: Client (Host) information --New -- Complete.
[Remark]After add new client (Host), remember to change the position of host and detector.
Question 3: How to change the location of hosts and detectors?
Situated: Client (Host) -- Details -1.Change the position of host: Click Change the position of Client(Host) -- icon is Blue Hawk,
Yellow Hawk, Red Hawk -- Using Mouse click icon, don't release left button, dragging the icon to
the position where you want, release left button, It will pop up a confirm window click "Yes" to
update, otherwise you can continue dragging.
2.Change the position of detector: Click" Change the position of Detector" -- icon is Red Hawk -Using Mouse click icon, don't release left button, dragging the icon to the position where you
want, release left button, It will pop up a confirm window click "Yes" to update, otherwise you can
continue dragging.
[Remark]Default coordinate (1, 1)
Question 4: Why some administrators can add/edit/delete messages, but I can't?
This system is distinguished by administrator permission
1. Have "Edit Permission" permission can edit yourself and other administrators' permission;
3.Copy Driver\BfVoice.dll
4.Copy file Driver\BfVoive8.sys to windows directory : system32\Drivers cover the old files.
5.Restart computer.
NotePlease note that there are not any copy of BfVoice8.sys&BfVoice in the Windows
directory.
Page
3. Operations for Software Centre
If this is your first time use the Software, please do as this:
3.1 System Running
Open Internet Explorer web browser or other web browser (IE6 or above),
URL: http:// server IP address / virtual directory site alias
Virtual directory: "Alarm Center Setup" in the virtual directorysite Virtual alias
Directory: The directory name in alarm center installation
E.g. IP 192.168.1.223
Virtual Directory[website name]: alarm system
1.The computer is a server.
Url:"http://localhost/alarmsystem" or "http://192.168.1.223/alarmsystem"
2.LAN: Url: http://localhost/alarmsystem Or http://192.168.1.223/alarmsystem
Default username: admin,
Default password: admin
Page
3.2 Add/Edit Administrator Information
Change the administrator password:After you login your account, please change your password.
E.g: Enter into Administrator Information page, Click Edit then input the new password, click
Confirm. Complete the operation.
3.3 Add/Edit GSM communication protocol and Voice Card
Interval.
1) Add communication protocol
Only having protocolthe software can communicate with Voice Card and GSM Alarm Receiver.
Enter into System Setup page, click Communication Config.-Add-Communication
Password box
Confirm
Page
Config. page, please set the parameter as you want, the default Config.: speed: 9600, Digit
Bit:8;Parity check: None; stop bit:1
2) Change GSM communication protocol
Enter into System Setup, click communication config. Click Edit jump to Edit
communication config page, Select the port in the serial port name, then select the parameter,
click confirm complete.
3) Change the Voice Card Interval Time
Voice Card Interval Time: You can choose the best time for receiving one Alarm Message by this
operation.
And the time can be 400ms to 1500ms.You can set up by yourself.
Enter into System Setup , click Voice Card interval -Voice Card Interval -Edit
detectors coordinates.
Faq 3: How to change the coordinate of client (host) and detector?
Click Client (host) information Detail -1.Change position of Client (host):
Click "Change Client (host) position" Blue, yellow, red Hawk Icon-- Using Mouse click icon,
don't release left button ,dragging the icon to the position where you want, release left button, It
will pop up a confirm window click "Yes" update, otherwise you can continue dragging.
2.Change position of Detector:
Click "Change Detector position" Red PatrolHawk Icon --Using Mouse click icon, don't release
left button, dragging the icon to the position where you want, release left button, It will pop up a
confirm window click "Yes" update, otherwise you can continue dragging.
Note: Default coordinates (1,1)
Faqs 4. why some administrators can add\edit\delete messages, but I can't?
This system distinguish administrators permission.
1.Have"Edit Permission" permission can edit yourself and other administrators' permission;
2.Have "Add" permission can add information
3.Have "Delete" permission can delete information
4.Have "Edit" Permission can edit information;
5. Have" Add commands" permission can add remote control commands
6.Have "Remote Control" permission can remotely control host
7.Have"Disarm"permission can cancel warning sound
8.Have"Database Backup & Restore" permission can backup and restore the database;
Edit Permission: "Administrator information" Edit -Note: Only having "Edit Permission" permission can edit yourself and other administrators'
permission.
Faqs 5: There is individual icon turn to red (alarm) and what I can do?
When the Voice Card receive the alarm information, As long as click the red icon(Alarm) on the
"Alarm center" page. The warning sound will automatically vanish, at the same time the icon turn
to blue(disarm)
Note: Only having "Disarm" permission can cancel the warning