Escolar Documentos
Profissional Documentos
Cultura Documentos
462
Eye Protection
475
Hearing Protection
481
Respiratory Protection
488
Hand Protection
496
Protective Clothing
502
Protective Footwear
513
516
520
10
Safety Equipment
NZ : IPRM 2007 : SECTION 10 : SAFETY EQUIPMENT
461
10
Safety Equipment
The life of a hard hat shell is generally three (3) years from date
of issue (not manufacture). AS/NZS 1801 recommends that head
harnesses be replaced every two (2) years. Replacement time
is dependant on the use and care of the hard hat. Any hard hat
showing signs of damage, discolouration or weathering prior to
these replacement times should be replaced immediately.
BOC accepts no liability for the incorrect choice of personal protective equipment. This information is a guide only. It is the responsibility of
the purchaser to ensure they have sought professional advice in relation to the use of products in a particular environment.
Source: Use of Personal Protective Equipment at Work: A Guidance Note (published by WorkCover Nov 1996).
Occupational Personal Protection (published by Standards Australia).
462
10
Most of the welding helmets and hand shields shown here are
supplied with shade 11 lens and CR39 cover lens. Helmets
with the flip up lens come complete with a clear polycarbonate
chipping viewing lens.
For more information on our complete range of welding helmets
and hand shields, contact your local BOC specialist or ring the
BOC hotline on 0800 723 378.
Description
Part No.
453833BOC
Light-duty sweatband
453835BOC
Ratchet harness
453838BOC
Part No.
453851BOC
Part No.
454060BOC
Part No.
Camouflage
8405-52
*WARNING Anti-spatter plate is not impact resistant and should not be used when grinding.
463
10
133x114mm
Description
Part No.
Description
Part No.
453852BOC
454088BOC
453853BOC
454089BOC
453854BOC
454090BOC
453855BOC
454091BOC
453856BOC
453857BOC
Description
Part No.
Description
Part No.
453861BOC
Clear, 108x51mm*
453999BOC
453862BOC
Clear, 133x114mm
454098BOC
454077BOC
*WARNING Anti-spatter plate is not impact resistant and should not be used when grinding.
464
10
108x51mm
Description
Part No.
1.5 diopter
454012BOC
2.0 diopter
454010BOC
2.25 diopter
454014BOC
2.50 diopter
454011BOC
*WARNING Anti-spatter plate is not impact resistant and should not be used when grinding.
NZ : IPRM 2007 : Section 10 : safety equipment
465
10
Speedglas Flexview
Ideal for poor lighting conditions
The Speedglas FlexView has a big 120x90mm clear polycarbonate
plate that is ideal for a precision weld under low light conditions.
The user simply lifts up the spring-mounted Speedglas filter
assembly for weld prep. The spring holds the auto-darkening
filter securely on top of the helmet, giving the welder a
big, clear view behind the FlexView protection plate.
Upgrade Speedglas 9000 helmets to FlexView
Existing Speedglas 9000 helmets can be easily transformed
using the Speedglas FlexView Conversion Kit to install both
the welding filter holder and the clear polycarbonate plate.
Impact resistant
The clear FlexView protection plate conforms to
Australian Standards. The polycarbonate lens is appropriate
for grinding, sanding, cleaning and drilling, as well as the
protected inspection of newly-completed welds.
466
Description
Part No.
3M401870
3M401880
3M440500
3M441800
10
Speedglas ProTop
A perfectly balanced safety helmet for welders
Speedglas ProTop, a combination of safety helmet, welding
visor and auto-darkening filter, is especially designed for
welders working in areas with overhead hazards, such
as cranes, protruding beams and moving machinery.
The key to the Speedglas ProTop system is the exclusive
pivot mechanism that connects the welding visor to the
safety helmet. Traditional welding safety helmets create a
heavy forward centre-of-gravity when the welding visor
is raised; as a result, the user feels off-balance, and the
leveraged weight puts additional strain on neck muscles.
The ProTop pivot mechanism has two sets of axes; one
to lift the welding visor away from the welder's face, and
another axis tonest the welding visor down low over
the safety helmet in a perfectly balanced, locked-down
position. The welding visor automatically unlocks when the
welder pulls it back down into position over the face.
Speedglas
9002X
Description
Part No.
3M483870
3M483880
Speedglas
9002V
Speedglas
90002D
Speedglas
9000XF
Speedglas
Utility
MIG / MAG
TIG (>20A)
TIG (120A)
MIG / MAG
TIG (>20A)
TIG (120A)
Grinding
Optimised
Suitable
Not Recommended
467
10
Speedglas 9002X
Light shade 3
Description
Part No.
3M401880
Speedglas 9000XF
Description
Part No.
3M401850
3M401851
3M401852
No compromises needed
The new control buttons enhance adjustment of the filters
shade, sensitivity, delay, and on/off functions for personal
settings. By selecting just the right settings for each task, the
welder reduces eye strain and improves the quality of every
weld. All of these options are about user comfort, personal
preference, and having the filter perform exactly the way the
welder wants for each specific welding application.
468
10
Speedglas 9002V
Light shade 3
Description
Part No.
3M401870
Speedglas 9002D
Description
Part No.
3M401840
Speedglas Utility
Light shade 3
Description
Part No.
Utility shade 10
3M408110
Utility shade 11
3M408111
469
10
Part No.
Description
Part No.
3M408010
3M431000
3M408011
3M432000
3M400050
3M400051
3M164009
3M400052
3M164005
3M400040
3M165020
3M400070
3M166000
3M400080
3M167520
3M401100
Sweatband leather
3M168000
3M401190
3M169001
3M401195
Tecaweld headcape
3M169100
3M171015
3M401800
3M171020
3M401890
3M171021
3M171022
3M401895
3M171023
3M422000
3M426000
3M427000
3M427071
3M428000
3M428010
3M428020
3M428030
3M428040
3M428050
*WARNING Anti-spatter plate is not impact resistant and should not be used when grinding.
470
10
TA570WHITE (Vented)
Part No.
TA597
ABS cap
Spare Parts
Neck Flap
TA170
Chin Strap
TA175
TA173NAV
Part No.
TA598
White
TA560WHITE
TA094
Yellow
TA560YELLOW
Lambswool sweatband
TA095
Green
TA560GREEN
Blue
TA560BLUE
Orange
TA560ORANGE
Red
TA560RED
Fluoro yellow
TA560FLUROYELLOW
Fluoro orange
TA560FLURORANGE
Part No.
White
TA570WHITE
Yellow
TA570YELLOW
Blue
TA570BLUE
Green
TA570GREEN
Red
TA570RED
Orange
TA570ORANGE
Fluoro yellow
TA570FLUROYELLOW
Fluoro orange
TA570FLURORANGE
471
10
Safety Caps
Unisafe Safety Cap Combinations
Part No.
VV765
Visor Holder
VH500
VH500P
RB302C
472
10
Faceshields
Faceshields are designed to provide comfortable and safe eye and
face protection in areas subject to hazardous projectiles or splashing
liquids. A comprehensive range of faceshields that utilise two basic
materials polycarbonate and thermolite that can be attached to
the browguard.
Unisafe Visors
Full length facial protection for the eyes, face, neck and ears
Description
Part No.
VV848
VV501
High Heat
Clear thermotuff with chin guard 230x400
VV511
VV882
VV901
VV904
VV515
Mesh
Plastic mesh
VM820
Description
Part No.
Description
Part No.
454615BOC
VC105
473
10
Description
Part No.
Description
Part No.
Faceshield
RB920PVM
454542BOC
Description
Part No.
Description
Part No.
VV997
200 mm x 380 mm
454614BOC
474
Description
Part No.
215 mm x 380 mm
454511BOC
Safety Equipment
10
Eye Protection
BOC accepts no liability for the incorrect choice of personal protective equipment. This information is a guide only. It is the responsibility of
the purchaser to ensure they have sought professional advice in relation to the use of products in a particular environment.
Source: Use of Personal Protective Equipment at Work: A Guidance Note (published by WorkCover Nov 1996).
Occupational Personal Protection (published by Standards Australia).
AS/NZS 1336: 1997 Recommended practices for occupational eye protection (published by Standards Australia).
AS/NZS 1337: 1992 Eye protectors for industrial applications (published by Standards Australia).
475
10
Eye Protection
Welding Goggles
Anatomical shape and soft material allow a close yet comfortable fit
Integrated, indirect ventilation allows air movement directly
across the lens while protecting against splashes and dust
Manufactured from PVC plastic and glass filled nylon for lift front
Part No.
454031BOC
Part No.
476
454040BOC
Description
Part No.
9301045
9300185F
Part No.
Shade 5 (pair)
453810BOC
Polycarbonate Lens
Description
Part No.
453812BOC
Eye Protection
10
Safety Spectacles
The Umatta Range
The Umatta Range consists of scratch resistant, affordable
eyewear that meets the needs of New Zealand. Comfortable
and practicle, the single lens wrap around styles allow unlimited
field of vision with lightweight frames for wearer comfort.
The wide range of styles is approved to Australian/New
Zealand Standards AS/NZS 1337 with UV385 lens.
U0201S
U301BM
Umatta 201
Umatta 301
Description
Part No.
Description
Part No.
Clear
U201C
U301C
Smoke
U201S
U301S
U301BM
U401BM
U0202S
Umatta 401
Umatta Barkly
Description
Part No.
Description
Part No.
Clear hardcoat
U401C
U0200BM
U401CAF
U0201LM
Amber hardcoat
U401A
U0202S
Smoke hardcoat
U401S
U0203C
U401LM
U401BM
477
10
Eye Protection
Boll Bandit 2
Description
Part No.
Description
Part No.
1683200
1683211
1683203
1683212
1683201
1683202
Part No.
Standard
Clear, anti-fog, acetate lens, clear body
9301614
9301618
Foambound
Clear, anti-fog, acetate lens, clear body
9301624
9301628
Supravision HC-AF
Clear, anti-scratch outside, anti-fog inside,
polycarbonate lens, foam bound, clear body
9301304
9301305
478
Description
Part No.
9301382
9301383
9301383F
Eye Protection
10
9160005
9191004
9160001
9191007
9160120
The uvex gravity zero adjusts easily to the shape of the head and
seems to the wearer to weigh next to nothing.
Exceptional ventilation
Indirect ventilation
Sporty design
Description
Part No.
Description
Part No.
Blue/Grey frame
Black Frame
Hard coat lens clear
9191004
9160001
9191005
9160004
9191006
9160120
9191007
Blue/Orange frame
9191008
9160002
9191009
9160302
9191010
9160005
9160008
9160014
9160015
479
10
Eye Protection
9180945
9188365
Cybri-Splash
Anti fog lens non vented guard with head band fitted
Description
Part No.
Clear
9188365
Grey
9188366
Description
Part No.
9180015
9180125
9180943
9180945
480
Safety Equipment
10
Hearing Protection
Do people have to shout at each other at normal speaking distance to make themselves heard?
Loud or frequent noises damage the hair cells. Over time, excessive
noise may cause the cells to die. Then the auditory nerve cannot
pick up the sound and relay it to the brain.Very loud noises, such as
jet engines and gun-fire, can damage hearing very quickly.
Other noises damage only after youve been around them for
hours. A noise that is 85 decibels wont hurt you in the short
run, but if youre around it for eight hours or more, you need
hearingprotection.
An essential part of hearing protection is a hearing protection
program. Details of such a program are found in AS 1269.
For further information, refer to Australian/New Zealand Standards:
AS/NZ 1269 Occupational Noise Management and AS/NZ 1270
Acoustics Hearing Protectors.
Grading
85dB sanding
90dB subway
120dB gunfire
For use
Old
Grade
NEW
Class
Old
upto (dB)
NEW
upto (dB)
Old
upto (dB)
NEW
upto (dB)
11
1013
91
90
1217
1417
97
95
1823
1821
103
100
2429
2225
109
105
30+
26+
115
110
The information above is provided as a general outline and is not intended to be a definitive statement on the subject matter.
Professional advice should be sought before any action is taken in relation to the matters described above.
Source: Use of Personal Protective Equipment at Work: A Guidance Note (published by WorkCover Nov 1996).
Occupational Personal Protection (published by Standards Australia).
481
10
Hearing Protection
Earplugs Disposable
Introducing PELTOR NEXT
Peltor has developed the NEXT line of earplugs with
electrifying colours, exciting shapes, and ultra-soft materials.
Description
Part No.
Description
Part No.
P1010
No-Touch earplugs,
un-corded (box 100 pair)
AP2000
P1011
P2001
3M earplug with a unique articulated shape allows easy fit and also
reduces pressure for improved comfort.
Description
Part No.
312-1201
311-1103
482
Class 4
Description
Part No.
3M1120
3M1130
10
Hearing Protection
Earplugs Reusable
Soft, flexible flanges conform to the shape of the ear canal to form
a triple-level seal against noise. The plastic LiveWire stem allows for
quick, clean and optimal insertion for maximum protection. Available
with vinyl or cloth LiveWire cord.
Description
Part No.
Description
Part No.
LT30
P3000
3M1260
3M1271
3M Reusable Earplugs
3M reusable earplugs are made of soft washable material for better
comfort and convenience. The triple flanged design fits securely in
the ear canal and provides reliable protection.
Class 3
Description
Part No.
3M1260
3M1271
Description
Part No.
Regular
FDT-30A
Small
FDT-30SMA
483
10
Hearing Protection
Freestanding Earmuffs
Peltor Earmuff System
The Peltor earmuff system features three attenuation levels, each
available in four headband modes:
Neckband (B)
H6B
H6F
The earmuffs are designed for comfort and performance and feature
such factors as liquid/foam filled sealing rings, pressure equalisation
channels, low-perspiration, non-allergenic sealing surfaces, low,
consistent clamp force, and two-point independent suspension for
balance and secure fit. Cups are smooth and easy to clean without
any difficult protrusions or hard-to-reach pockets. Sealing rings and
absorption pads simply snap on and can be replaced in seconds.
Attenuation ranking
H6 (beige)
H7 (green)
Heavy-duty
H10 (black)
Description
H61B
H7A
Part No.
SLC80 33dB
H10A
SLC80 30dB
H7A
SLC80 28dB
H7B
SLC80 30dB
H7F
SLC80 22dB
H6A
SLC80 22dB
H6B
SLC80 23dB
H6F
SLC80 20dB
H61B
SLC80 30dB
H7A-PTL290
Hygiene kits
H7A-PTL290
H7B
HY5
HY7
HY10
HY53PTL
Push to listen
When users lift their muffs, they lower their protection. Now Peltor
puts safe listening at their fingertips. Just push the button on the
PTL muff and speech and sounds outside the muff can be heard
inside clearly and safely. After 30 seconds, the muff automatically
returns to its full class 5 protection. Listen again? Just push again.
Its that simple. The PLT earmuff from Peltor listening when its
wanted, protection when its needed.
H7F
484
H10A
Part No.
H7A-PTL290
Hearing Protection
10
Bilsom Clarity
Sound Management Technology
Sound Management Technology, allows the wearer to communicate with co-workers
better and to hear more naturally (e.g. warning signals) whilst being protected.
Bilsom Clarity C3
Weight: 150g
Description
Part No.
1010421
Description
Part No.
Description
Part No.
Clarity C1
1011142
Clarity C3
1011146
Hygiene kit
1006080
Hygiene kit
1006081
Bilsom Leightning
When youre in a rough industrial environment and need to block out noise, Bilsoms
Leightning series steel wire construction provides high performance and robust
durability. Leightning stands up to daily use and abuse without compromising comfort.
Leightning works well in extreme temperatures/humidity and under aggressive
chemicalinfluences.
Leightning L1N
(Neckband)
Leightning L2F
(Folding)
Leightning L1
Description
Part No.
1010922
1011998
Description
Part No.
Description
Part No.
1011994
1011997
Hygiene kit
Hygiene kit
1011998
Hygiene kit
1011999
485
10
Hearing Protection
uvex dB ex
The dB ex series incorporates features
designed and developed for maximum
wearer comfort to encourage
continuous use, combined with
protection you can depend on. Design
features include wide cup openings,
uvex exclusive soft-touch cushions,
positive fit, low clamp pressure, support
and easy adjustment.
3M 1425 Earmuff
3M 1430 Earmuff
Description
Part No.
3M1425 Earmuff
3M1425
Description
Part No.
3M1430 Earmuff
3M1430
2500UV
3M 1435 Earmuff
3M 1440 Earmuff
Weight 218g
Weight 225g
Part No.
Description
Part No.
3M1435 Earmuff
3M1435
3M1440
Hygiene Kit
3M1437
Hygiene Kit
3M1442
Description
486
2500NUV
Description
Part No.
2500UV
2500NUV
Hygiene kit
6600
10
Hearing Protection
Cap Attachment Earmuffs
Push to listen
Description
Part No.
Description
Part No.
Description
Part No.
H7 Helmet earmuff
H7P3G
H10P3G
H7P3G-PLT290
Hygiene kit
HY7
Hygiene kit
HY10
Hygiene kit
HY7
Leightning (L1H)
Description
Part No.
Description
Part No.
Description
Part No.
1011242
1011243
1012536
Hygiene kit
1006080
Hygiene kit
1006081
Hygiene kit
1011998
487
10
Safety Equipment
Respiratory Protection
Deficiency of oxygen
There are two ways of providing respiratory protection against dusts, fumes and gases.
1. Air Purifying Respirators
These respirators purify the air using filters. The choice of filters
depends on the level of contaminants in the air. Sometimes a
combination of gas and dust filters is necessary. There are two types
of air purifying respirators. One is non-powered and relies on the
wearer to draw in air by inhaling. The other is powered and relies
on a battery-powered motor to draw in the air.
2. Supplied Air Respirator
This method delivers clean air or oxygen from an uncontaminated
source. Types of supplied air respirators include; air hose air
delivered through a hose by natural breathing or a pump; air-line
air delivered through an airline via a compressor or compressed
air cylinders; and self-contained breathing apparatus (SCBA)
compressed air comes in bottles strapped to the users body.
BOC accepts no liability for the incorrect choice of personal protective equipment. This information is a guide only. It is the responsibility of
the purchaser to ensure they have sought professional advice in relation to the use of products in a particular environment.
Source: Use of Personal Protective Equipment at Work: A Guidance Note (published by WorkCover Nov 1996).
Occupational Personal Protection (published by Standards Australia).
488
Respiratory Protection
10
32C
Respirator without
a Cool Flow valve.
26C
Respirator with a
Cool Flow valve.
3M Specialty Welding
Respirators (P2)
Description
Part No.
3M8210
3M8822
Part No.
3M8512
3M8514
489
10
Respiratory Protection
3M7502
Part No.
3MR6211
3M6201
Description
Part No.
3M6100
3M6200
3M6300
Description
Part No.
3M6806
Welding Kits
3M welding kits provide protection against dusts, mists and fumes
given off during welding. Filters give relief against nuisance organic
vapours and acid gases and are approved for protection against low
vapour pressure agricultural chemicals.
Kits contain a half facepiece and a pair of 2000 Series
particulatefilters.
Description
Part No.
7500 small
3M7501
Description
Part No.
7500 medium
3M7502
3M6047
7500 large
3M7503
490
Respiratory Protection
10
Good working
environment with
forced ventilation
Aluminium
Stainless steel
Working
environment with
limited ventilation
MIG
TIG
STICK WELDING
MIG
TIG
STICK WELDING
Confined space
Working
environment
classified as IDLH
Adflo and Fresh-air
must never beused
in atmospheres
Immediately
Dangerous to Life
or Health (IDLH).
Always consult your
Safety Engineer.
MIG/MAG
STICK WELDING
PLASMA (Welding and Cutting)
Steel painted
MIG/MAG
STICK WELDING
PLASMA (Welding and Cutting)
Steel galvanised
MIG/MAG
STICK WELDING
PLASMA (Welding and Cutting)
STICK WELDING
PLASMA (Welding and Cutting)
Material
cleaned with
trichloroethylene
MIG
TIG
STICK WELDING
WARNING: BOC accepts no liability for the incorrect choice of respiratory protective equipment. This chart represents a general
guide ONLY and it is the responsibility of the purchaser of respiratory equipment to ensure that the fume hazards in the workspace are
adequatedly monitored and that an audit of the toxicity of the fume components is completed. A detailed, informed choice of the appropriate
protection can only be made with an accurate knowledge of the hazards, occupational exposure limits and the equipment specification.
491
10
Respiratory Protection
Description
Part No.
3M466680
3M466670
3M466600
Description
Part No.
Description
Part No.
3M899020
3M446680
3M899030
3M446670
3M899035
3M446600
492
Respiratory Protection
10
Fresh-air C
For highly-contaminated welding environments or in confined
spaces, you need the Fresh-air C (Compressed Air) system
with a nominal protection factor of 200. The lightweight, beltmounted regulator allows the user to adjust the airflow from
140 to 300 Litres per minute, making Fresh-air C ideal for hot
and strenuous work.
Respirator standards
The Fresh-air C system conforms to Australian Standard
AS/NZS 1716 for compressed air respirators.
Description
Part No.
3M448880
3M448870
3M448800
Description
Part No.
3M468880
3M468870
3M468800
Description
Part No.
3M899100
493
10
Respiratory Protection
STEP 1
STEP 2
Part No.
P2 particulate
3M451-00-02P
3M451-01-02P
Description
Part No.
P3 particulate
3M451-02-20
3MDMAFU
3M462-05-00P10
3M021-00-38P
3MV300K
494
3MV300SK
Respiratory Protection
10
STEP 3
For powered air and supplied
air choose a headtop
(Other headtop options are available please enquire)
Part No.
3MAL6
3MAL1
3MAL7
Part No.
Acetate
3MAL4P
Part No.
3M008-00-19P
Part No.
Polycarbonate
3MAL4G
These shields provide all round vision and unique airduct. The liftup shield offers either high impact face protection (3MAL4G) or
medium impact with easy clean acetate for painspraying.
3ML905
495
10
Safety Equipment
Hand Protection
6. If you are unsure about the use of gloves, ask your supervisor.
To find out the dangers of the hazardous materials that you will
be handling, you must first refer to the relevant Material Safety
Data Sheets.
1. Wear the right glove. They are not all the same. A glove that
offers protection against one chemical may not protect you from
another.
2. Make sure it fits. Gloves must fit the same as shoes.You cannot do
your job well if you are fumbling with gloves that are too big or
your can't move your hands because they are too small.
3. Sometimes you may need to wear one glove over another. Some
chemical-resistant gloves puncture or tear easily. If your work
could cause a rip or puncture you may need to wear a protective
glove over the chemical glove.
4. Check gloves for tears or punctures before you put them on and
while you are working.
BOC accepts no liability for the incorrect choice of personal protective equipment. This information is a guide only. It is the responsibility
of the purchaser to ensure they have sought professional advice in relation to the use of products in a particular environment.
Source: Use of Personal Protective Equipment at Work: A Guidance Note (published by WorkCover Nov 1996).
Occupational Personal Protection (published by Standards Australia).
496
Hand Protection
10
Leather Gloves
Description
Part No.
743373
Description
Part No.
40cm
743380
68cm
300RKBXT
Part No.
743395
Welding glove
Part No.
743307
Leather Gauntlet
Grey high quality leather gauntlet, gold welted seams, fully lined
Welding glove
Welding glove
Part No.
743309
Part No.
743306
497
10
Hand Protection
Welding glove
Part No.
743372
Part No.
743371
TIG glove
Economical buying
Description
Part No.
740026
743383
498
Description
Part No.
1 pair of 2 lefties
740019
10
Hand Protection
Leather Gloves (cont)
25cm length
Description
Part No.
Medium
743330
Description
Part No.
Large
743331
Small
743405
Large, Economy
743378
Medium
743342
Large
743341
X large
743340
2X Large
743339
25cm length
Lined
Safety cuff
Part No.
Knuckle Bar
743358
Split leather
Part No.
113102
Polishers Glove
Reinforced palm
Part No
744464
Part No.
743398
499
10
Hand Protection
Aluminised Glovesaver
35cm
Part No.
747085
Aluminised Gauntlet
Description
Part No.
Left-hand
743301
Right-hand
743302
Kevlar Sleeve
Wool lining
100% Kevlar
45cm
Part No.
Part No.
500
KSS200
747068
Hand Protection
10
Crusader Flex
36cm length
12 pairs per pack, 6 packs per carton
Description
Part No.
Size 9
42-474/09
Size 10
42-474/10
Heat reflective back with Kevlar woven fibre on palm and cuff
Welted seams
40cm gauntlet
Part No.
116001
Extended cuff
100% Kevlar
Extended cuff
100% Kevlar
Description
Part No.
Small
KK100/07
Description
Part No.
Medium
KK100/08
Small
KPD100/07
Large
KK100/09
Medium
KPD100/08
Large
KPD100/09
501
10
Safety Equipment
Protective Clothing
Industrial Clothing
Workers trousers
Workers shorts
Work shirts
Industrial jackets
Generally these clothes should be close fitting around the wrist and
trouser leg and be made of a durable material. For outdoor workers,
long trousers and shirts can be used for protection against the sun
along with a hat, sunglasses, sunscreen.
Other industries, such as welding, timber yards, food industry,
require additional protective clothing that includes protective
aprons, spats, hoods, leather jackets, leggings, aramid sleeves etc.
The information above is provided as a general outline and is not intended to be a definitive statement on the subject matter. Professional
advice should be sought before any action is taken in relation to the matters described above.
Source: Use of Personal Protective Equipment at Work: A Guidance Note (published by WorkCover Nov 1996).
Occupational Personal Protection (published by Standards Australia). Standards Australia
502
Protective Clothing
10
Leather Clothing
Australian made
Length 71cm
Length 71cm
Description
Part No.
LE001
LE002
LE003
LE004
LE005
LE006
Description
Part No.
LE301
LE302
LE303
LE304
503
10
Protective Clothing
Bolero Jacket
Australian made
Australian made
Length 40cm
Length 75cm
Description
Part No.
Description
Part No.
740233
740261
740234
740262
740235
740263
504
Protective Clothing
10
Welders Cap
Welders Snood
Lined
27cm extension
22cm
Part No.
743521
Part No.
743336
Welders Sleeves
Part No.
LE101
743332
505
10
Protective Clothing
Knee Pads
Chrome leather knee pads with thick dense foam insert and
quick release velcro and elastic fastening
Tough heat resistant leather that wraps over the top and down the
back of the pad offering maximum protection from flying sparks.
Soft cushioning ensures comfort. Elastic straps maintain a secure fit.
Non-marking polyurethane kneecap increases protection.
Ideal for welders, or for any contraction application such as
concrete or flooring work.
Part No.
Part No.
6991-01
743335
Welders Leggings
Part No.
506
743329
6991-03
Protective Clothing
10
Velcro attachment
Part No.
WAK/PHGM30
Part No.
NPB/30
Description
Part No.
Small
WAK/PJ30S
Medium
WAK/PJ30M
Large
WAK/PJ30L
X-large
WAK/PJ30XL
2X-large
WAK/PJ30XXL
Part No.
PB/NF23Y
WARNING Proban fabric should not be used to protect against molten aluminium, zinc or magnesium.
NZ : IPRM 2007 : Section 10 : safety equipment
507
10
Protective Clothing
Proban Shirt
Proban Overall
Proban treated
Proban treated
Sizes S3XOS
Sizes 82122
Description
Part No.
Description
Part No.
Navy
56282/size
Navy
02282/size
Proban Trouser
Proban treated
Brass zip
Sizes 82112
Description
Part No.
Navy
34782/size
WARNING Proban fabric should not be used to protect against molten aluminium, zinc or magnesium.
508
Protective Clothing
10
Dome fastening.
Dome fastening.
Sizes S4XOS
Sizes S4XOS
Part No.
Description
Part No.
Navy/yellow
52517/size
Navy/yellow*
52617/size
Navy/orange*
52518/size
Navy/orange
52618/size
Description
Sizes 312
Part No.
00783/size
Button fastening.
Sizes S3XOS
Part No.
55536/size
509
10
Protective Clothing
S/S Polycotton 2
Tone Shirt
L/S Polycotton 2
Tone Shirt
110gsm 65/35 polycotton
Button fastening.
Button fastening.
Sizes S4XOS
Sizes S4XOS
Description
Part No.
Navy/yellow*
56517/size
Navy/orange
56518/size
Description
Part No.
Navy/yellow
56617/size
Navy/orange*
56618/size
2 Tone Polycotton
Overall With Tape
Zip Fastening
AS/NZ: 4602
Sizes 412
Part No.
0778T/size
Button closure.
Sizes S4XOS
510
Description
Part No.
Navy/yellow*
49137/size
Navy/orange
43118/size
Protective Clothing
10
Brass zip
Cotton Drill
Dome Overall
Inset sleeve
Sizes 314
Description
Part No.
White
00422
Dome fastening
Raglan sleeve
Available in R, S and L
Description
Part No.
Spruce
00448
White
04422
Navy
00482
Orange
04436
Spruce
04448
Navy
04482
Azure
04379
Dome fastening
Sizes 82112
00445
00493
Sizes 77112
Khaki
Grey
Description
Part No.
White
01222
Khaki
01245
Spruce
01248
Azure
01279
Navy
01282
Grey
01293
511
10
Polycotton Dome
Overall
Polycotton Domed
Roughall
Brass zip
Inset sleeve.
Domes
Dome fastening.
Inset sleeve.
Sizes 82112
Sizes 314
Sizes 312
Description
Part No.
White
05222
Description
Part No.
Spruce
05248
Description
Part No.
White
07022
Red
05262
White
06422
Spruce
07048
Royal
05283
Navy
06482
Navy
07082
Royal
06483
Royal
07083
Mid blue
06486
Mid blue
07086
Charcoal
06494
512
Safety Equipment
10
Protective Footwear
Anti-static properties.
Slipping
Slip
Resistant
Heat
Resistant
Oil/petrol/solvents
Resistant
Excellent
Excellent
Good
(up to 140)
Excellent
Excellent
Excellent
Good
(up to 300)
Excellent
Type
Description
TPU
DD
Rubber
The information above is provided as a general outline and is not intended to be a definitive statement on the subject matter.
Professional advice should be sought before any action is taken in relation to the matters described above.
Source: Use of Personal Protective Equipment at Work: A Guidance Note (published by WorkCover Nov 1996).
Occupational Personal Protection (published by Standards Australia).
513
10
Footwear Protection
Nitrile
HOWLER Cairns
HOWLER Longreach
HOWLER Dingo
Bellows tongue
Sizes 713
Sizes 513
Sizes 513
Description
Code
Description
Code
Black
449117BLK/size
Claret
449019CLT/size
OLIVER Knight
OLIVER Chief
Description
Code
Claret
449015/size
HOWLER Devonport
Lace Up Boots
Welders boot
Sizes 412
Sizes 513
Padded collar
Lace up boot
Rambler leather
Sizes 313
Description
Black
Description
Part No.
Black
20-232/size
514
Part No.
Description
Code
20-240/size
Claret
449021CLT/size
10
Footwear Protection
TPU (Thermoplastic Urethane)
HOWLER Mildura
Sizes 413
Description
Code
Black
312140BLK/size
HOWLER Mudgee
Sizes 413
Code
Description
Code
Black
312102BLK/size
Black
439188BLK/size
Elastic side
Sizes 513
Hi-shine leather
Fully lined
Sizes 412
Sizes 413
Black
419105/size
Elastic sided
Code
Sizes 413
Description
Description
Description
Code
Black
USBBK/size
Description
Code
Black
219121BLK/size
515
10
Safety Equipment
Industrial Workshop
Ventilation
Important Safety Information
for Fume Extraction and Ventitlation
Are dust and fumes present in your workplace?
Does any part of the processes at your site create a dust hazard to
personnel or the environment (e.g. manufacturing, sawing, grinding,
loading of tanks or vessels, filling of bags or containers etc)?
BOC accepts no liability for the incorrect choice of personal protective equipment. This information is a guide only. It is the responsibility
ofthe purchaser to ensure they have sought professional advice in relation to the use of products in a particular environment.
516
10
CX2
PF2
Autostart Cleaner
This high quality brush motor cleaner incorporates sophisticated
electronics to prolong motor life. The Autostart Cleaner starts
automatically whenever welding commences. The earth cable is
simply positioned over the sensor window. No hard wiring or
attachments to the welding machine are necessary. The motor
features auto cut-out carbon brushes that prevent it from operating
when brush wear becomes too great.
The WA2 Cleaner can be connected to any of the major brands of
integrated fume extraction MIG guns available. Alternatively, it can
be used with the Ozone Pilot Gun Kit. Model WO2 is also available
without the auto start feature. WT7 Workstation can be used with
multiple inlets.
Part No.
WA2
517
10
Beams
Ozone hinged beams support one or two Flexi Arms, providing
extraction over an impressively large area. Hinged beam systems can
be moved against the wall when not in use, increasing safety and
work access. The Fixed Beam can be used as an integral component of
the extraction system or as a:
Wall-mounted extension
Floor-mounted column
Like the Flexi Arm, the Beam uses no flexible hose in its construction,
resulting in improved performance and minimal maintenance.
Description
Part No.
Fixed Beam, 3m
BF3
Hinged Beam, 3m
BH3
Hinged Beam, 6m
BH6
Fume Cleaners
Mobile Fume Cleaners, in combination with Ozones unique all
solid Flexi Arm, provide the ultimate choice in welding fume
control. High efficiency, cleanable filters capture fume and recirculate
clean, breathable air back into the workplace.
The compact model FS7 is designed for use with one Flexi Arm.
FS8 Cleaners have a larger filter with sufficient capacity for two
Flexi Arms. Both models offer the convenience and safety of single
phase motors as standard. With high flow rates and a massive filter
area, Mobile Fume Cleaners are suitable for continuous production
welding and even the heaviest fume generating welding processes.
Description
Part No.
FS7
FS8
Flexi Arms
The revolutionary Ozone Flexi Arm incorporates solid joint
technology.The Arm has several distinct advantages over conventional
arms with flexible hose: improved air flow, lower pressure, greater
strength and reduced maintenance costs. The unique joints provide
remarkable flexibility, yet will remain precisely in any position.
The rotating wrist joint allows the inlet face to be positioned
anywhere the welder wishes. Arms are available in 1.5, 2, 3 and 4m
lengths. 3m and 6m hinged extension beams are also available.
Depending on your choice of extraction systems, you may/may not require Flexi
Arms.Therefore, they do not come with the units and are purchased separately.
518
Description
Part No.
AF1
Flexi Arm 2m
AF2
Flexi Arm 3m
AF3
Flexi Arm 4m
AF4
Fixed Beam 3m
BF3
Hinged Beam 3m
BH3
Hinged Beam 6m
BH6
10
Pollution Extractors
System Extractors
PX3
PX4
CX3
CX4
CX6
CC4
CP3
The Vibro Cleaner ensures safe, quick filter cleaning. Simply move
the handle in and out. By connecting a compressed air line to the
fitting supplied, additional cleaning is achieved. The BD7 is designed
as a portable unit to allow it to be simply wheeled away into storage
and opening up the workspace access.
Several other styles of bench cleaners are available for use with
electronic components (e.g. spray paint and chemical powders).
An acoustic booth is available to suppress noise and improve
workplace amenity.
Part No.
BD7
519
10
Safety Equipment
Industrial Workshop
Safety
Important Safety Information
About First Aid
BOC accepts no liability for the incorrect choice of personal protective equipment. This information is a guide only. It is the responsibility
of the purchaser to ensure they have sought professional advice in relation to the use of products in a particular environment.
520
10
G2M
Bottlechock
Multiple Kits
Bottlechock kits are compact and easy to
store and assemble. Each cylinder is gripped
and secured individually. Every kit has two
brackets (three with kit G Oxy-Acet) so
each individual cylinder can be secured in
two places.
Description
Part No.
Description
Part No.
G1M
GOXYACET
G2M
Includes 2 medium
Bottlechocks, 2 large
Bottlechocks and 3 brackets
G3M
G4M
Description
Part No.
G1S
G2S
G3S
G4S
Description
Part No.
G1L
G2L
521
10
Fire Extinguishers
An extended range of fire extinguishers, for your specific
requirements, is available on request.
CLASS
A
Electrical
Part No.
E00011
466142C
E00128
E00132
E00143
E00011
E00128
522
E00132
466142C
E00143
10
Welding Blankets
Application Heat and Retention and Insulation
A welding blanket is designed to encapsulate a metal object
that has been subjected to heat treatment either through stress
relieving or welding. The blanket retards the cooling rates
Heatshield
HeatShield is manufactured from E glass fibre which is a noncombustible, flexible, inorganic material that has been specifically
designed to provide retention of heat. HeatShield has a service
temperature of 500C with 100% duty cycle providing a wide scope,
fulfilling most applications.
Thickness: 2.2mm
Weight: 1150g/m2
Width (mm)
Drop (mm)
Part No.
900
1800
HSB/63
1800
1800
HSB/66
T1000
T1000 is manufactured from E glass fibre which is a noncombustible, flexible, inorganic material that has been treated to
withstand higher temperatures than HeatShield. T1000 has been
developed to provide a blanket fabric that will be unaffected by
surface temperatures of 800C continuously.
Thickness: 2.2mm
Weight: 1150g/m2
Width (mm)
Drop (mm)
Part No.
900
1800
T1000/63
1800
1800
T1000/66
Fire Blanket
Description
Part No.
1.2m x 1.8m
740185
523
10
Welding Screens
Colours and Luminance
Transmittance
Benefits of ArcSafe
ArcSafe welding screens absorb the
dangerous ultra violet light that is emitted
from the arc welding process and also offers
these added benefits.
Category
Min. %
Max.%
C1
17.8
29.1
C2
8.5
17.8
C3
3.2
8.5
C4
1.2
3.2
AS 3957:1991
C5
0.44
1.2
NZS 5852:1991
Product Certified
Elliott ArcSafe Welding Screens are
product Certifed to:
Sizes
Elliotts recognise the need for not only standard sizes but also the
need for screens in specific sizes, no matter now large or small.
Width (mm)
Drop (mm)
1300
1800
STE1813R
STE1813G
1800
1800
STE1818R
STE1818G
2000
1800
STE1820R
STE1820G
2600
1800
STE1826R
STE1826G
3900
1800
STE1839R
STE1839G
4500
1800
STE1845R
STE1845G
5200
1800
STE1852R
STE1852G
524
10
Neoweld
SilicaGlass
Leather
Thickness: 1.2mm
Thickness: 1.2mm
Weight: 1000g/m2
Weight: 1000g/m2
Width (mm)
Drop (mm)
Part No.
900 mm
1800 mm
NWB/63
1700 mm
1800 mm
NWB/66
Width (mm)
Drop (mm)
Part No.
900 mm
1800 mm
SG117
1700 mm
1800 mm
SG1817
Thickness: 1.4mm
Width (mm)
Drop (mm)
Part No.
900 mm
1800 mm
CLD/189
1800 mm
1800 mm
CLD/1818
Important: Care should be taken to position a drape to enhance the natural run off of the weld spatter and dross.
525
10
Safety Signs
Mandatory Signs
How to Order
Specify item code MP 301-, then size
(A,S,M,L), material and quantity.
e.g. MP 301-L + Plastic + Quantity
Portrait
Size
(mm)
Material
175 x 250
Adhesive vinyl
240 x 340
Plastic PVC
S MET
240 x 340
Metal
300 x 450
Plastic PVC
M MET
300 x 450
Metal
480 x 600
Plastic PVC
L MET
480 x 600
Metal
Size
(mm)
Material
330 x 140
Adhesive vinyl
450 x 200
Plastic PVC
M MET
450 x 200
Metal
Landscape
(mm)
Material
175 x 250
Adhesive Vinyl
240 x 340
Plastic PVC
300 x 450
Metal
Plastic PVC
Metal
L
480 x 600
Plastic PVC
Metal
526
10
Safety Mats
Size 500x500mm
Size 500x500mm
Thickness 25mm
Thickness 25mm
Part No.
MP2130
Part No.
MP2110
High Compression
Black Rubber Mat
Size 500x500mm
Size 500x500mm
Thickness 25mm
Thickness 25mm
Part No.
MP2135
Part No.
Size 2x1m
Thickness
Part No.
10mm
HCM0010
15mm
HCM0015
25mm
HCM0025
MP2115
Please enquire for the extended range of Matta floor covering for specific applications.
527
10
Part No.
MP2170
MP2171
600x100x25mm
Description
Part No.
MP2172
MP2173
Part No.
MP2174
Part No.
MP2180
MP2181
600x100x25mm
Description
Part No.
MP2182
MP2183
528
Description
Part No.
MP2184
10
Grime Goblin
Hand Cleaner
Lightning Scrubber
Part No.
500g
390C
Description
Part No.
4kg
390I
078C
20kg
390J
Part No.
078I
899C
078J
899I
20 litres
899J
705P
Step 2 Cleaning
Step 3 Conditioning
Stokolan
Lightning Orange
Pumice
Kresto
Reduces chapping
Description
Part No.
Silicone-free
Non-greasy formula
Description
Part No.
250ml Tube
28700524
Description
Part No.
100ml Tube
28105524
2000ml Softbottle
98704506
100ml Tube
28548524
30362
529
10
Sunscreen
1 litre Pump Top
Part No.
3027
Sunscreen
400ml Flip Top
Part No.
Part No.
Wall Mounter
Lockable Holder
3028
3024
Part No.
3019
Part No.
Part No.
1 litre
4451
2.5 litre
4452
Part No.
Sunscreen 50g
3021
Description
Sunscreen 100g
Sunscreen
2.5 litre Pump Top
3020
Anti-UV Pack
3022
Check your local paper for the daily UV index. The UV index
is an international, scientific measure of the level of Ultraviolet
radiation from the sun. The higher the level the greater the risk
of skin damage.
Part No.
UVPACK
Funds raised from the sale of these products support the work of the NZ Cancer Society.
530
10
Part No.
Description
Part No.
BQ010
A7225
BQ016
BQ812
Pouch Pack
Description
Part No.
15 employees
BQ015
125 emloyees
BQ016
Wall Mounted
Plastic Pack
Description
Part No.
Description
Part No.
15 employees
BQ811
25 person
A7102W
125 employees
BQ812
625 person
A7104W
2650 person
A7109W
5175 person
A7112W
76100 person
A7110W
BQ001
Burn Kit
Description
Part No.
Description
Part No.
1 - 25 person
A7104M
BQ003
26 - 50 person
A7109M
51 - 75 person
A7112M
76 - 100 person
A7110M
An extended range of First Aid is available. Please enquire for special requirements.
531