Escolar Documentos
Profissional Documentos
Cultura Documentos
1987
BRITISH STANDARD
--`,``-`-`,,`,,`,`,,`---
BS 1369-1:1987
--`,``-`-`,,`,,`,`,,`---
BS 1369-1:1987
Contents
--`,``-`-`,,`,,`,`,,`---
Page
Committees responsible
Inside front cover
Foreword
ii
1
Scope
1
2
Material
1
3
Design
1
4
Dimensions and tolerances
1
5
Marking
2
Figure 1 Measurement of aperture for expanded metal lath
2
Figure 2 Measurement of aperture for ribbed lath
2
Table 1 Designation of lath for internal application
1
Table 2 Designation of lath for external rendering
1
Publications referred to
Inside back cover
BSI 03-1999
BS 1369-1:1987
This Part of BS 1369 has been prepared under the direction of the Iron and Steel
Standards Committee and is a revision of BS 1369:1947, which is withdrawn.
This revision updates and metricates the previous edition to reflect changes in the
manufacturing processes and material selection. The major change is that
expanded metal lathing is now produced only from zinc coated or stainless steel
sheet or strip.
BS 1369-2, which is in preparation, will specify requirements for lathing
produced from wire mesh, which was not included in BS 1369:1947.
For corrosive environments it is recommended that a stainless steel lath should
be selected.
A British Standard does not purport to include all the necessary provisions of a
contract. Users of British Standards are responsible for their correct application.
Compliance with a British Standard does not of itself confer immunity
from legal obligations.
Summary of pages
This document comprises a front cover, an inside front cover, pages i and ii,
pages 1 and 2, an inside back cover and a back cover.
This standard has been updated (see copyright date) and may have had
amendments incorporated. This will be indicated in the amendment table on
the inside front cover.
BSI 03-1999
ii
--`,``-`-`,,`,,`,`,,`---
Foreword
BS 1369-1:1987
1 Scope
Reference
numbera
Mass per
square
metre
Type
kg
L1
0.89
2 Material
L2
1.11
L3
1.61
L4
1.77
L5
1.84
L6
2.62
CL 1
0.89
Corrugated expanded
metal lath G275
CL 2
1.11
Corrugated expanded
metal lath G275
CL 3
1.61
Corrugated expanded
metal lath G275
CL 4
1.77
Corrugated expanded
metal lath G275
CL 5
1.84
Corrugated expanded
metal lath G275
RL 1
1.33
3 Design
RL 2
1.48
RL 3
1.78
RL 4
1.84
RL 5
2.22
Mass per
square
metre
Type
kg
SL 1
1.09
SRL 1
1.35
SRL 2
1.84
RL 6
2.22
a SL
--`,``-`-`,,`,,`,`,,`---
BSI 03-1999
Copyright British Standards Institution
Provided by IHS under license with BSI
No reproduction or networking permitted without license from IHS
BS 1369-1:1987
5 Marking
1)
Marking BS 1369-1:1987 on or in relation to a product represents a manufacturers declaration of conformity, i.e. a claim by or
on behalf of the manufacturer that the product meets the requirements of the standard. The accuracy of the claim is therefore
solely the responsibility of the person making the claim. Such a declaration is not to be confused with third party certification of
conformity, which may also be desirable.
BSI 03-1999
BS 1369-1:1987
Publications referred to
--`,``-`-`,,`,,`,`,,`---
BSI 03-1999
BSI
389 Chiswick High Road
London
W4 4AL
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
--`,``-`-`,,`,,`,`,,`---