Escolar Documentos
Profissional Documentos
Cultura Documentos
Search
SUPPORT (/SUPPORT)
(/LEARNING)
LEARNING
COMMUNITY
(/COMMUNITY)
Home (/) > Support (/support) > AutoCAD (/support/autocad)
> Learn & Explore (/support/autocad/learn-explore)
Overview (/support/autocad/)
started)
(/support/autocad/downloads)
Downloads
Troubleshooting (/support/autocad/troubleshooting)
Share
You can construct solids and surfaces by extruding, sweeping, lofting, and
revolving.
English
Apr 10 2013
Open curves always create surfaces, but closed curves can create either solids or
surfaces depending on certain settings.
If you select a closed curve and extrude, sweep, loft, or revolve an object, you
create:
A solid if the Mode option is set to Solid.
A surface if the Mode option is set to Surface.
Conversion. Converts mesh objects and planar objects with thickness into solids
and surfaces.
Many of the same commands used with NURBS surfaces, can also be used with CV
splines.
and not the surface itself. If you reshape the surface, its link to the generating curve
will be broken and the surface will lose associativity and become a generic surface.
explore/caas/documentation/ACD/2014/ENU/files/GUID-A2C0A192-6F78-44AC9089-E91449193916-htm.html)
To Create a 3D Solid by Extruding
(http://knowledge.autodesk.com/support/autocad/learnexplore/caas/documentation/ACD/2014/ENU/files/GUID-B3B99AC4-B137-4144A5ED-A8167906172D-htm.html)
To Create a Procedural Surface by Extruding Along a Path
(http://knowledge.autodesk.com/support/autocad/learnexplore/caas/documentation/ACD/2014/ENU/files/GUID-CEF4A0A5-904B-412CAEB6-1F2CDBD6CD41-htm.html)
To Create a Solid by Sweeping an Object Along a Path
(http://knowledge.autodesk.com/support/autocad/learnexplore/caas/documentation/ACD/2014/ENU/files/GUID-34A06CBE-653E-49CEA70D-BEF717C1AF79-htm.html)
To Create a Surface by Sweeping an Object Along a Path
(http://knowledge.autodesk.com/support/autocad/learnexplore/caas/documentation/ACD/2014/ENU/files/GUID-B8602691-44FA-48B3B3B3-4CDB1F7A1853-htm.html)
To Create a NURBS Surface by Conversion and Lofting
(http://knowledge.autodesk.com/support/autocad/learnexplore/caas/documentation/ACD/2014/ENU/files/GUID-D745EDE9-6BC7-425C88F4-8E235F74500E-htm.html)
To Create a Solid by Lofting Through a Set of Cross-section Profiles
(http://knowledge.autodesk.com/support/autocad/learnexplore/caas/documentation/ACD/2014/ENU/files/GUID-A329664E-28C0-477AB6F6-F2E4E25901F4-htm.html)
To Modify a Lofted Solid or Surface by Changing the Surface Normal Settings
(http://knowledge.autodesk.com/support/autocad/learnexplore/caas/documentation/ACD/2014/ENU/files/GUID-B330A5DE-DDFB-4EDB89AE-25563B1840F2-htm.html)
To Revolve Objects About an Axis to Create a NURBS Surface
(http://knowledge.autodesk.com/support/autocad/learnexplore/caas/documentation/ACD/2014/ENU/files/GUID-8E3B4469-8C63-4999843E-6EA5E272E079-htm.html)
To Revolve Objects About an Axis to Create a Solid
(http://knowledge.autodesk.com/support/autocad/learnexplore/caas/documentation/ACD/2014/ENU/files/GUID-36BDF296-1501-4F679AA6-48BB8E4B7D77-htm.html)