Escolar Documentos
Profissional Documentos
Cultura Documentos
Utility /Product
Roof Deck
Floor Deck (Composite)
Form Deck (Non Composite)
Deck Features
Vented Deck
Integral Hanger Tab
Acoustical Deck
Technical Data
Diaphragm
Depth
Coverage
P-3606
P-2436
P-2404
P-2438
P-2403
P-3623
P-2432
1 (38mm)
3 (76mm)
3 (76mm)
3 (76mm)
3 (76mm)
2 (51mm)
3 (76mm)
36 (914mm)
24 (610mm)
24 (610mm)
24 (610mm)
24 (610mm)
36 (914mm)
24 (610mm)
OUR SERVICE
For project design, bid presentation or component manufacturing, our sales representatives,
engineers, technicians and draftsmen are at your service. Our team can suggest efficient and economical
solutions.
DRAWINGS
Canam Asia produces its own shop drawings for the fabrication of your steel joists, trusses and steel deck.
FABRICATION
Our production equipment has always been at the leading edge of technology. We have continued to invest significantly
to acquire the best available equipment in the industry, including computer-aided manufacturing and numerically-controlled
machinery. Canam Asia has an automated steel deck roll formers.
DELIVERY
Canam Asias advantage has always been our ability to deliver just on time, regardless of where or wh en you need our
products. We know that your on-site erection crew can not afford to wait. For this reason, our trucks travel around the
clock, to satisfy the requirements of your construction schedules.
North American Specification for the Design of Cold -Formed Steel Structural Members.
Design shall be made under Allowable Stress Design (ASD) no load factors was used. For this reason, the uniform loads
shown in the tables are the maximum loads that the deck can support.
The Canadian Sheet Steel Building Institute (CSSBI) specifies rules for steel deck practices. Canam Asia applied those
rules in the calculations for this catalog.
WARNING
Although every effort was made to ensure that all date in this catalog is factual and that the numerical values are accurate to a degree
consistent with cold-formed design standards, Canam Asia does not assure responsibility f or errors or oversights that may result from
the use of the information contained herein. Anyone making use of the contents of this catalog assumes all liability arising from such
use. All suggestions for improvements to this publication will receive full consideration for future printings.
THICKNESS
CAN/CSA-S136-01 standard for the design of cold-formed steel structural members indicated that the thickness supplied
shall not be less than 95% of the design thickness used. The generally accepted thickness of the zinc coating of a Z275
(G90) finish is approximately 0.040 mm (0.0015 in.).
COATING
Canam Asia steel deck profiles are available with Z275 (G90) or ZF75 (A25) zinc protection according to the standard
ASTM A 653M. Upon request, Canam Asia can also provide finish paint from the 8000 col or series with an underlying zinc
protection of Z275 (G90), or other types of material, given sufficient notice.
EMBOSSMENTS
The P-3623 and P-2432 deck profiles are available with embossments to act in composite action with a concrete slab.
Tables for these composite sections show loads and unshored s pans for normal weight concrete.
SHORTER LENGTHS
Upon special request made to our sales department, sheets are available in lengths of less than 1 800 mm (6 feet) .
CONCENTRATED LOADS
The loads indicated in the tables are uniformly distributed and must not be used as the equivalent of point loads or
linear loads. Proper analysis should be done by an engineer to verify the effects of those concentrated loads on the deck or
composite deck-slab.
For example:
The wheel load of rolling equipment on the steel deck during roofing material installation.
The large spacing between attachments of roofing material to steel deck under uplift conditions.
The footprint of a concentrated load on a slab.
Concentrated loads shall be analyzed to ensure they do not overstress the steel deck or the composite deck -slab locally.
P-3606
Canam Asias steel deck profile P-3606 is roll formed to cover 914 mm (36 in.).
The deck is available with a galvanized coating according to the stan dard
ASTM A 653M with zinc thickness corresponding to Z275 (G90) or
ZF75 (A25). Upon agreement with our sales department,
it is also possible to obtain steel deck with
aluminum-zinc coating according
to designation AZM 150
(AZ50) of the
standard
ASTM A 792M.
Nominal thicknesses range
from 0.76 mm (0.030 in.)
to 1.52 mm (0.060 in.). The flutes
are 38 mm (1.5 in.) deep and are spaced
at 152 mm (6 in.) center to center. The deck
can be rolled to lengths from 1 800 mm
(6 ft.) to 12 200 mm (40 ft.).
PHYSICAL PROPERTIES
Type
22
20
18
16
Nominal
Thickness
Design
Thickness
Overall
Depth
Weight
mm
(in.)
mm
(in.)
mm
(in.)
kg/m
2
(lb/ft )
mm
3
(in )
mm
3
(in )
0.76
(0.030)
0.91
(0.036)
1.21
(0.048)
1.52
(0.060)
0.762
(0.0300)
0.909
(0.0358)
1.217
(0.0479)
1.511
(0.0595)
37.4
(1.47)
37.5
(1.48)
37.8
(1.49)
38.1
(1.50)
8.50
(1.74)
10.07
(2.06)
13.26
(2.72)
16.34
(3.35)
9 325
(0.1734)
11 558
(0.2150)
15 813
(0.2941)
19 786
(0.3680)
9585
(0.1783)
12 005
(0.2233)
15 994
(0.2975)
19 786
(0.3680)
Section Modulus
+
M
M
3
Moment of Inertia
I
I
+
mm
4
(in )
189 947
(0.1391)
240 309
(0.1760)
350 812
(0.2569)
452 472
(0.3313)
mm
4
(in )
226 910
(0.1662)
271 057
(0.1985)
363 493
(0.2662)
452 472
(0.3313)
Effective properties area based on a unit width of 1 000 mm, S.I. units or 12 in. (imperial units).
Material according to ASTM A 653M SS Grade 340, yield strength of 340 MPa (50 ksi).
Tables are calculated according to CAN/CSA-S136-01 standard.
Loads at rows marked A are the allowable loads (Service loads, unfactored) controlled by the bending capacity, and those at rows
marked D are the uniform loads that produce a deflection of L/240.
P-3606
ALLOWABLE STRESS DESIGN LOADS TABLE (kPa)
Type
22
20
18
16
METRIC
SINGLE SPAN (mm)
Nominal
900
1 050
1 200
1 350
1 500
1650
1800
1950
18.19
13.47
10.36
8.22
6.67
5.53
4.65
3.97
16.93
10.66
7.14
5.02
3.66
2.75
2.12
1.66
22.06
16.34
12.58
9.97
8.10
6.71
5.65
4.48
4.16
21.41
13.48
9.03
6.34
4.63
3.48
2.68
2.11
1.69
30.23
22.40
17.25
13.68
11.12
9.21
7.75
6.61
31.26
19.69
13.19
9.26
6.75
5.07
3.91
3.07
38.08
28.23
21.74
17.24
14.01
11.60
9.77
40.32
25.39
17.01
11.95
8.71
6.54
5.04
1500
1650
1800
6.81
Thickness (mm)
0.76
0.91
1.21
1.52
2 100
2 250
2 400
2 550
2 700
5.70
4.97
4.37
2.46
2.00
1.65
8.33
7.19
6.27
5.51
4.89
3.96
3.17
2.58
2.13
1.77
1950
2100
2250
2400
2550
2 700
2 850
0.76
0.91
1.21
1.52
1050
1200
1350
2 850
(14.17)
(12.15)
(10.54)
8.37
5.65
4.76
4.06
3.51
3.06
2.69
2.39
2.13
40.77
25.68
17.20
12.08
8.81
6.62
5.10
4.01
3.32
2.61
2.15
1.79
1.51
(20.12)
(17.00)
13.13
10.44
8.50
7.05
5.94
5.07
4.38
3.82
3.36
2.98
2.66
2.39
51.58
32.48
21.76
15.28
11.14
8.37
6.45
5.07
4.06
3.30
2.72
2.27
1.19
1.62
30.47
22.70
17.54
13.95
11.35
9.41
7.93
6.77
5.85
5.10
4.49
3.98
3.55
3.19
75.30
47.42
31.77
22.31
16.27
12.22
9.41
7.40
5.93
4.82
3.97
3.31
2.79
2.37
37.71
28.09
21.70
17.25
14.04
11.64
9.81
8.37
7.23
6.31
5.55
4.92
4.39
3.95
97.12
61.16
40.97
28.78
20.98
15.76
12.14
9.55
7.65
6.22
5.12
4.27
3.60
3.06
2400
2550
2 700
2 850
0.76
20
0.91
18
1.21
16
1.52
1 050
1 200
1 350
1 500
1650
1800
1950
2100
2250
(16.11)
(13.80)
(12.08)
10.35
8.44
7.00
5.91
5.05
4.36
3.81
31.96
20.12
13.48
9.47
6.90
5.19
3.99
3.14
2.52
2.05
1.69
3.35
(22.86)
(19.60)
16.16
12.89
10.51
8.73
7.37
6.30
5.44
4.75
4.18
3.71
3.31
40.43
25.46
17.06
11.98
8.73
6.56
5.05
3.97
3.18
2.59
2.13
1.78
1.50
37.11
27.82
21.59
17.22
14.04
11.66
9.84
8.41
7.27
6.34
5.59
4.95
4.42
3.97
59.02
37.17
24.90
17.49
12.75
9.58
7.38
5.80
4.65
3.78
3.11
2.59
2.19
1.86
45.94
34.43
26.71
21.30
17.37
14.43
12.17
10.40
8.99
7.85
6.91
6.13
5.47
4.92
76.12
47.94
32.11
22.56
16.44
12.35
9.52
7.48
5.99
4.87
4.01
3.35
2.82
2.40
N.B.
-Web crippling controls loads in brackets calculated with the end bearing length equal to 40mm and the interior bearing length equal to 100mm.
-The span is the shorter of the following dimensions: dimension c/c of the supports, or the clear dimension between the supports plus the
depth of the deck at each end.
Accessories for the flooring systems
C=1/2" U/N
3/4" FOR
10 & 12GA
A
POUR STOP
PS_
CELL CLOSURE
CC_
Z- CLOSURE
ZC_
PHYSICAL PROPERTIES
Type
22
20
18
16
Nominal
Design
Overall
Thickness
mm
(in.)
Thickness
mm
(in.)
Depth
mm
(in.)
0.76
(0.030)
0.91
(0.036)
1.21
(0.048)
1.52
(0.060)
0.762
(0.0300)
0.909
(0.0358)
1.217
(0.0479)
1.511
(0.0595)
76.2
(3.00)
76.4
(3.01)
76.7
(3.02)
77.0
(3.03)
Weight
Section Modulus
+
kg/m
2
(lb/ft )
M
3
mm
3
(in )
M
3
mm
3
(in )
11.85
(2.43)
14.04
(2.875)
18.33
(3.752)
22.71
(4.650)
23570
(0.4385)
28717
(0.5343)
39753
(0.7396)
50531
(0.9401)
24552
(0.4568)
30518
(0.5678)
41655
(0.7750)
51681
(0.9615)
Moment of Inertia
+
I
4
mm
4
(in )
952749
(0.6979)
1196178
(0.8762)
1736958
(1.2723)
2275156
(1.6665)
I
4
mm
4
(in )
1138807
(0.8341)
1375125
(1.0072)
1843832
(1.3506)
2294846
(1.6809)
Effective properties area based on a unit width of 1 000 mm, S.I. units or 12 in. (imperial units).
Material according to ASTM A 653M SS Grade 340, yield strength of 340 MPa (50 ksi).
Tables are calculated according to CAN/CSA-S136-01 standard.
Loads at rows marked A are the allowable loads (Service loads, unfactored) controlled by the bending capacity, and those at rows
marked D are the uniform loads that produce a deflection of L/240.
22
20
18
16
METRIC
SINGLE SPAN (mm)
Nominal
1 400
1 800
2200
2600
3000
3400
3800
4 200
4600
(18.85)
11.60
7.79
5.60
4.21
3.29
2.63
2.16
1.80
22.52
10.61
5.80
3.52
2.29
1.57
1.13
0.83
0.63
23.24
14.18
9.53
6.84
5.15
4.01
3.22
2.63
2.20
1.86
28.27
13.30
7.29
4.41
2.87
1.95
1.41
1.05
0.80
0.62
32.45
19.74
13.25
9.50
7.14
6.29
4.46
3.65
3.04
41.05
19.31
10.58
6.41
4.17
2.85
2.05
1.52
1.16
41.23
25.08
16.84
12.07
9.08
7.92
5.66
4.64
53.76
25.30
13.85
8.39
5.46
3.67
2.69
1.99
1400
1 800
2200
2600
3000
3400
3800
Thickness (mm)
0.76
0.91
1.21
1.52
5000
5400
5800
6200
6600
2.58
2.21
1.91
0.90
0.72
0.58
3.87
3.27
2.81
2.43
2.13
1.88
1.52
1.18
0.94
0.76
0.62
0.51
4200
4600
5000
5400
22
20
18
16
0.76
0.91
1.21
1.52
(12.95)
5800
6200
6600
(10.07)
(8.24)
6.15
4.64
3.62
2.91
2.38
1.99
1.69
1.45
1.25
1.10
54.24
25.52
13.98
8.47
5.51
3.79
2.71
2.01
1.53
1.19
0.95
0.76
0.62
(18.01)
(14.00)
10.27
7.39
5.57
4.34
3.48
2.85
2.38
2.02
1.73
1.50
1.31
1.16
68.10
32.04
17.55
10.63
6.92
4.75
3.41
2.52
1.92
1.50
1.19
0.96
0.78
0.65
(30.91)
20.56
13.83
9.93
7.47
5.82
4.66
3.82
3.19
2.70
2.31
2.01
1.76
1.55
98.88
46.53
25.48
15.44
10.05
6.90
4.94
3.66
2.79
2.17
1.72
1.39
1.14
0.94
41.81
25.51
17.16
12.32
9.27
7.22
5.79
4.74
3.95
3.35
2.87
2.49
2.18
1.92
129.51
60.93
33.37
20.22
13.16
9.04
6.48
4.80
3.65
2.84
2.26
1.82
1.49
1.24
22
0.76
20
0.91
18
16
1.21
1.52
1400
1 800
2200
2600
3000
3400
3800
4200
4600
5000
5400
(14.71)
(11.44)
(9.36)
7.61
5.76
4.50
3.62
2.97
2.48
2.10
1.80
5800
1.57
6200
6600
42.51
20.00
10.96
6.64
4.32
2.97
2.13
1.57
1.20
0.93
0.74
0.60
(20.46)
(15.91)
(12.73)
9.18
6.92
5.41
4.34
3.56
2.97
2.51
2.16
1.87
1.64
1.45
53.38
25.12
13.76
8.33
5.42
3.73
2.67
1.98
1.50
1.17
0.93
0.75
0.61
0.51
(35.13)
25.52
17.20
12.36
9.31
7.26
5.82
4.77
3.98
3.37
2.89
2.50
2.19
1.94
77.50
36.47
19.97
12.10
7.88
5.41
3.88
2.87
2.18
1.70
1.35
1.09
0.89
0.74
(51.67)
31.67
21.34
15.34
11.55
9.01
7.22
5.92
4.93
4.18
3.58
3.11
2.72
2.40
101.50
47.76
26.16
15.85
10.32
7.09
5.08
3.76
2.86
2.23
1.77
1.43
1.17
0.97
N.B.
-Web crippling controls loads in brackets calculated with the end bearing length equal to 40mm and the interior bearing length equal to 100mm.
-The span is the shorter of the following dimensions: dimension c/c of the supports, or the clear dimension between the supports plus the depth of the
deck at each end.
Accessories for the flooring systems
ANGLE
RIDGE & VALLEY
RV_
C
SUPPORT CHANNEL
SC_
BUTT STRIP
BS_
Canams roof deck P-2438 and P-2403 are roll formed to cover 24 in. (610 mm) in width. The flutes are 3 in.
(76 mm) deep and are spaced at 8 in. (203 mm) on center.
The deck is readily available with steel galvanized according to ASTM standard A 653 with a zinc
thickness corresponding to G90 (Z275), Other finishes are available upon request; please check with
our sales department for availability.
Nominal thicknesses range from 0.030 in. (0.76 mm) to 0.060 in. (1.52 mm).
PHYSICAL PROPERTIES
Type
22
20
18
16
Nominal
Design
Overall
Thickness
mm
(in.)
Thickness
mm
(in.)
Depth
mm
(in.)
0.76
(0.030)
0.91
(0.036)
1.21
(0.048)
1.52
(0.060)
0.762
(0.0300)
0.909
(0.0358)
1.217
(0.0479)
1.511
(0.0595)
76.3
(3.00)
76.4
(3.01)
76.7
(3.02)
77.0
(3.03)
Weight
Section Modulus
+
kg/m
2
(lb/ft )
M
3
mm
3
(in )
M
3
mm
3
(in )
10.62
(2.18)
12.58
(2.58)
16.57
(3.39)
20.53
(4.20)
17709
(0.3294)
21623
(0.4022)
30095
(0.5598)
38471
(0.7156)
20812
(0.3871)
24822
(0.4617)
33180
(0.6172)
41174
(0.7658)
Moment of Inertia
+
I
4
mm
4
(in )
728118
(0.5332)
921099
(0.6745)
1362720
(0.9979)
1821290
(1.3337)
I
4
mm
4
(in )
1022860
(0.7490)
1221680
(0.8946)
1637740
(1.1993)
2037940
(1.4924)
Effective properties area based on a unit width of 1 000 mm, S.I. units or 12 in. (imperial units).
Material according to ASTM A 653M SS Grade 340, yield strength of 340 MPa (50 ksi).
Tables are calculated according to CAN/CSA-S136-01 standard.
Loads at rows marked A are the allowable loads (Service loads, unfactored) controlled by the bending capacity, and those at rows
marked D are the uniform loads that produce a deflection of L/240.
10
22
Nominal
1 400
1 800
2200
2600
3000
3400
3800
4 200
(14.19)
8.72
5.88
4.22
3.18
2.48
1.99
1.63
17.24
8.11
4.44
2.69
1.75
1.20
0.86
0.64
17.57
10.72
7.21
5.18
3.89
3.03
2.43
1.99
1.66
21.81
10.26
5.62
3.40
2.22
1.52
1.09
0.81
0.61
24.67
15.00
10.07
7.22
5.43
4.23
3.39
2.77
32.26
15.18
8.31
5.04
3.28
2.25
1.61
1.19
31.51
19.17
12.87
9.23
6.94
5.41
4.33
43.12
20.29
11.11
6.73
4.38
3.01
2.16
Thickness (mm)
0.76
20
METRIC
0.91
18
1.21
16
1.52
4600
5000
5400
5800
2.31
1.96
1.68
0.91
0.71
0.56
3.55
2.96
2.50
2.15
1.86
1.60
1.22
0.95
0.75
0.61
6200
6600
22
0.76
20
0.91
18
1.21
16
1.52
1400
1 800
2200
2600
3000
3400
3800
4200
4600
5000
5400
5800
(9.71)
(7.55)
(6.18)
4.91
3.70
2.89
2.32
1.91
1.59
1.35
1.16
1.00
6200
6600
41.52
19.54
10.70
6.48
4.22
2.90
2.08
1.54
1.17
0.91
0.72
0.58
(13.51)
(10.50)
8.20
5.90
4.45
3.47
2.78
2.28
1.90
1.61
1.38
1.20
1.05
52.53
24.71
13.54
8.20
5.34
3.67
2.63
1.95
1.48
1.15
0.92
0.74
0.60
(23.19)
16.42
11.05
7.93
5.97
4.65
3.73
3.05
2.55
2.16
1.85
1.60
1.40
1.24
77.71
36.56
20.03
12.13
7.90
5.43
3.89
2.88
2.19
1.71
1.35
1.09
0.89
0.74
33.36
20.38
13.71
9.85
7.41
5.78
4.63
3.79
3.16
2.68
2.30
1.99
1.74
1.54
103.86
48.87
26.77
16.21
10.56
7.25
5.19
3.85
2.93
2.28
1.18
1.46
1.20
0.99
22
0.76
20
0.91
18
1.21
16
1.52
1400
1 800
2200
2600
3000
3400
3800
4200
4600
5000
5400
(11.04)
(8.58)
(7.02)
32.54
15.31
8.39
(15.35)
(11.94)
41.17
5800
6200
6600
(5.94)
4.59
3.59
2.89
2.37
1.98
1.68
1.44
5.08
3.31
2.27
1.63
1.21
0.92
0.71
0.57
(9.77)
7.32
5.53
4.32
3.47
2.84
2.37
2.01
1.72
1.50
19.37
10.61
6.43
4.18
2.87
2.06
1.52
1.16
0.90
0.72
0.58
(26.35)
(20.36)
13.73
9.88
7.44
5.80
4.65
3.81
3.18
2.69
2.31
2.00
1.75
1.55
60.91
28.66
15.70
9.51
6.19
4.25
3.05
2.26
1.72
1.34
1.06
0.86
0.70
0.58
(39.35)
25.27
17.05
12.26
9.23
7.20
5.77
4.73
3.95
3.34
2.87
2.49
2.18
1.92
81.40
38.30
20.98
12.71
8.27
5.68
4.07
3.01
2.29
1.79
1.42
1.14
0.94
0.78
N.B.
-Web crippling controls loads in brackets calculated with the end bearing length equal to 40mm and the interior bearing length equal to 100mm.
-The span is the shorter of the following dimensions: dimension c/c of the supports, or the clear dimension between the supports plus the depth
of the deck at each end.
Accessories for the flooring systems
A=1" MIN
CLOSURE STRIP
CS_
EDGE STRIP
ES_
11
P-3623 COMPOSITE
Canam Asias composite P-3623 is a steel deck roll formed to cover 914 mm (36 in.).
The deck is available with a galvanized coating according to the standard ASTM A 653M
with zinc thickness corresponding to Z275 (G90). Other types of steel sheet
finishes may affect the bond properties between deck
and concrete. Venting slots can be added to the
bottom of the flutes. Contact our sales
department for more information.
Nominal thicknesses are 0.76 mm
(0.030 in.), 0.91 mm (0.036 in.)
and 1.21 mm (0.048 in.).
The flutes are
51 mm (2 in.) deep
and are spaced at 305 mm (12 in.)
center to center. The deck can be rolled to
lengths from 1 800 mm (6 ft.) to 12 200 mm (40 ft.).
The wide flutes provide enough space to
weld headed studs through the deck to the top
of beams or joists that will act in composite action with the concrete slab.
Standard steel grade conforms to ASTM A 653M SS Grade 340 with a yield strength of 340 MPa
(50 ksi). and material thickness of 1.07 mm (0.042 in.) are available given sufficient delivery time.
DIMENSIONS
PHYSICAL PROPERTIES
T
Design
mm
(in.)
Overall
Depth
mm
(in.)
0.76
(22)
0.762
(0.030)
0.91
(20)
1.21
(18)
Type
1,52
(16)
kN
(lbs)
Section Modulus
+
M
M
3
3
mm
mm
3
3
(in )
(in )
50.8
(2.00)
8,48
(1.74)
5,14
(352)
14 295
(0.266)
14 295
(0.266)
413 359
(0.303)
Steel
Area
2
mm
2
(in )
950
(0.480)
0.914
(0.036)
51.0
(2.01)
10,05
(2.06)
6,74
(462)
18 166
(0.338)
18 166
(0.338)
512 772
(0.376)
1 138
(0.573)
25.47
(1.00)
1.214
(0.048)
1,524
(0.036)
51.3
(2.02)
51.0
(2.01)
13,19
(2.70)
16,44
(3,37)
11,85
(812)
20,55
(1409)
26 817
(0.499)
34 623
(0.644)
26 817
(0.499)
34 623
(0.644)
717 608
(0.526)
892 674
(0.654)
1 513
(0.715)
1 900
(0.898)
25.63
(1.01)
25.77
(1.01)
Weight
Kg/m
(psf)
Allowed
Bearing
Moment
of Inertia
4
mm
4
(in )
Effective properties area based on a unit width of 1 000 mm, S.I. units or 12 in. (imperial units).
Material according to ASTM A 653M SS Grade 340, yield strength of 340 MPa (50 ksi).
Tables are calculated according to CAN/CSA-S136-01 standard.
12
Center
of Gravity
mm
(in.)
25.40
(1.00)
P-3623 COMPOSITE
ALLOWABLE TABLE OF COMPOSITE SLAB (kPa)
Slab
Deck
Maximum Unshored
Span
Self
(mm)
(mm)
0.76
2 280
0.91
2 630
1.21
METRIC
Comp.
Mom.
SPAN (mm)
of Inertia
(mm)
(kPa)
(106 mm 4)
1 500
1 650
1 800
1 950
2 100
2 850
3450
2 940
3040
1.8
5.8
14.79
12.51
10.76
9.39
8.29
7.39
6.65
6.03
5.51
5.06
4.68
4.34
4.05
3.75
3300
3 410
1.8
6.2
18.41
15.55
13.36
11.63
10.25
9.13
8.20
7.42
6.76
6.20
5.72
5.30
4.94
4.43
3 090
3 990
3 820
1.9
6.9
20.00
18.57
1593
13.86
12.20
10.85
9.73
8.80
8.01
7.34
6.76
6.26
5.82
5.30
1.52
3300
4410
4080
1.9
7.5
20.00
18.55
15.91
13.84
12.19
10.84
9.73
8.79
8.01
7.34
6.76
6.26
5.82
5.30
0.76
2220
2890
2980
1.84
8.30
17.22
14.56
12.51
10.91
9.62
8.57
7.71
6.98
6.37
5.85
5.39
5.00
4.66
4.36
0.91
2570
3240
3350
1.85
8.83
20.00
18.12
15.55
13.53
11.92
10.60
9.51
8.61
7.84
7.18
6.62
6.13
5.70
5.32
1.21
3090
3920
3760
1.89
9.84
20.00
20.00
18.57
16.14
14.20
12.62
11.31
10.22 9.30
8.51
7.83
7.25
6.73
6.28
1.52
3300
4190
3950
1.92
10.68
20.00
20.00
18.55
16.12
14.18
12.61
11.30
10.21 9.29
8.51
7.83
7.24
6.73
6.28
0.76
2010
2630
2720
2.41
14.67
20.00
18.64
16.02
13.97
12.32
10.98
9.87
8.94
7.49
6.91
6.41
5.98
5.59
0.91
2310
2960
3060
2.42
15.56
20.00
20.00
19.91
17.32
15.26
13.57
12.18
11.02 10.04
9.20
8.48
7.85
7.30
6.82
1.21
2830
3580
3490
2.46
17.26
20.00
20.00
20.00
20.00
18.18
16.16
14.49
13.09 11.91
10.90
10.04 9.28
8.63
8.05
3030
3930
3700
2.49
18.69
20.00
20.00
20.00
20.00
18.17
16.15
14.48
13.08 11.91
10.90
10.03 9.28
8.62
8.05
0.76
1940
2550
2630
2.64
17.93
20.00
20.00
17.42
15.19
13.40
11.94
10.74
9.73
8.15
7.52
6.98
6.50
6.08
0.91
2230
2860
2960
2.65
19.0
20.00
20.00
20.00
18.84
16.59
14.76
13.25
11.99 10.92
10.01
9.22
8.54
7.94
7.42
1.21
2740
3460
3390
2.68
21.04
20.00
20.00
20.00
20.00
19.77
17.57
15.76
14.24 12.96
11.86
8.75
1.52
2940
3840
3620
2.71
22.76
20.00
20.00
20.00
20.00
19.77
17.57
15.76
14.24 12.96
11.86
8.75
0.76
1840
2370
2450
3.3
23.2
20.00
20.00
19.60
17.10
15.09
13.46
12.11
10.98 10.02
9.21
8.51
7.90
7.36
6.45
0.91
2120
2670
2760
3.3
24.6
20.00
20.00
20.00
20.00
18.67
16.62
14.93
13.51 12.31
11.29
10.41 9.65
8.98
8.08
1.21
2560
3230
3160
3.3
27.0
20.00
20.00
20.00
20.00
20.00
19.77
17.74
16.03 14.60
13.37
1.52
27.40
36.50
33.90
3.3
29.3
20.00
20.00
20.00
20.00
20.00
19.76
17.73
16.03
13.36
0.76
1780
2250
2330
3.7
31.9
20.00
20.00
20.00
19.42
17.14
15.28
13.75
12.47 11.38
10.46 9.66
8.97
0.91
2040
2540
2620
3.7
33.7
20.00
20.00
20.00
20.00
20.00
18.88
16.95
15.35 13.99
12.82 11.82
10.96 10.20
1.21
2450
3070
3030
3.7
37.0
20.00
20.00
20.00
20.00
20.00
20.00
20.00
18.22 16.58
15.19 13.98
1.52
2630
3480
3250
3,8
40,0
20.00
20.00
20.00
20.00
20.00
20.00
20.00
18.21 16.58
15.18 13.98
0.76
1740
2220
2290
3.78
41.51
20.00
20.00
20.00
20.00
18.79
16.75
15.06
13.65 12.46
11.44 10.56
9.80
0.91
2000
2500
2580
3.79
43.74
20.00
20.00
20.00
20.00
20.00
20.00
18.59
16.82 15.32
14.04 12.94
1.21
2440
3020
3010
3.82
48.06
20.00
20.00
20.00
20.00
20.00
20.00
20.00
19.98 18.18
16.64 15.32
1.52
2610
3420
3230
3.85
51.76
20.00
20.00
20.00
20.00
20.00
20.00
20.00
19.97 18.17
16.64 15.32
102
115
140
1.52
8.16
150
8.88
165
4.59
184
8.36
7.58
9.80
200
9.13
Material according to ASTM A653M SS Grade 340, yield strength of 340 MPa (50 ksi).
Tables are calculated according to CAN/CSA-S136-01 standard.
Concrete density is 2400 kg/m (150 lbs/ft) developing a minimum compressive resistance equal to 20 MPa (3 ksi) at 28 days.
During the construction, the steel deck must support itself, the concrete and a construction uniform load of 1 kPa or a transversal
load of 2 kN/m, as specified by the Canadian Sheet Steel Building Institute.
The maximum unshored spans shown in the table are established for bending under the self-weight and the construction loads, for
web crippling and for the deflection under wet concrete to be less than L / 180. The web crippling resistance is calculated assuming
the end bearing length equal to 76.2 mm (3) and the interior bearing length equal to 152.4 mm (6).
The composite slab and its reinforcing should be verified for the effect of concentrated loads.
Shaded values indicate that the deck should be shored at mid-span during the pour and the curing of concrete for those spans and
concrete thickness conditions. Shaded values correspond to the maximum unshored span values shown at the left of the table.
The design engineer is responsible for specifying size and location of the wire mesh in the concrete slab in order to respect current
concrete practices.
13
8.54
P-2432 COMPOSITE
Canam Asias composite P-2432 is a steel deck roll formed to cover 610 mm (24 in.).
The deck is available with a galvanized coating according to the
standard ASTM A 653M with zinc thickness corresponding
to Z275 (G90). Other types of steel sheet finishes may
affect the bond properties between deck and concrete.
Venting slots can be added to the bottom of the flutes.
Contact our sales department for more information.
Nominal thicknesses are 0.76 mm(0.030 in.),
0.91 mm (0.036 in.) and 1.21 mm (0.048 in.).
The flutes are 76 mm (3 in.) deep and
are spaced at 305 mm(12 in.) center
to center. The deck can be rolled
to lengths from 1 800 mm (6 ft.)
to 12 200 mm (40 ft.). The wide flutes provide enough
space to weld headed studs through the deck to the
top of beams or joists that will act in composite action
with the concrete slab. Standard steel grade conforms to ASTM
A 653M SS Grade 340 with a yield strength of 340 MPa (50 ksi). and material
thickness of 1.07 mm (0.042 in.) are available given sufficient delivery time.
DIMENSIONS
PHYSICAL PROPERTIES
T
Overall
Design
mm
(in.)
Depth
mm
(in.)
Kg/m
(psf)
kN
(lbs)
Section
Modulus
+
M
M
3
3
mm
mm
3
3
(in )
(in )
0.76
(22)
0.762
(0.030)
76,26
(3.00)
9,46
(1,94)
5,71
(391)
22802 22727
(0.424) (0.423)
1019179
(0.746)
0.91
(20)
0.914
(0.036)
76,41
(3.01)
11,21
(2,30)
9,31
(638)
28816 28696
(0.536) (0.534)
1266921
(0.928)
1248541
(0.914)
1 350
(0.612)
37,59
(1.48)
1.21
(18)
1.214
(0.048)
1,524
(0.060)
76,72
(3.02)
77.01
(3,03)
14,71
(3,01)
18,09
(3,70)
18,01
(1234)
28,67
(1965)
42619 42500
(0.793) (0.791)
56208 56522
(1.019) (1.660)
1801306
(1,319)
2255297
(0.3898)
1780736
(1,304)
2255297
(0.3898)
1 800
(0.813)
2220
(1.020)
37,74
(1.48)
37,89
(1.48)
Type
1,52
(16)
Weight
Allowed
Bearing
Moment of Inertia
+
I
4
mm
4
(in )
PHYSICAL PROPERTIES
Effective properties area based on a unit width of 1 000 mm, S.I. units or 12 in. (imperial units).
Material according to ASTM A 653M SS Grade 340, yield strength of 340 MPa (50 ksi).
14
I
4
mm
4
(in )
1003361
(0.735)
Steel
Center
Area of Gravity
2
mm
mm
2
(in )
(in.)
1 131
37,51
(0.534)
(1.48)
P-2432 COMPOSITE
ALLOWABLE TABLE OF COMPOSITE SLAB (kPa)
Slab Deck
Maximum Unshored
Span
Self
Comp.
Mom.
SPAN (mm)
Thick Thick
Single Double Triple Weight
.
.
of Inertia
(106 mm 4) 2400
(mm)
(mm)
(kPa)
3580
METRIC
2500
2700
2850
3000
3150
3750 3900
4050
4200
4350
127
0.76
2800
3470
2.1
10.6
9.36
8.36
7.52
6.81
6.21
5.69
5.23
4.84
4.49
4.18
3.91
3.67
3.45
3.22
0.91
3200
3880
4010
2.1
11.2
10.60
9.53
8.63
7.86
7.21
6.64
6.14
5.71
5.33
4.99
4.68
4.41
4.17
3.93
1.21
3880
4700
4550
2.2
12.5
14.43
13.14
12.05
11.11
10.29
9.58
8.95
8.40
7.91
7.47
7.07
6.72
6.39
6.03
1.52
4290
5390
5300
2.2
13.7
14.44
13.15
12.05
11.11
10.29
9.58
8.96
8.41
7.91
7.47
708
6.72
6.40
6.06
0.76
2650
3310
3420
2.42
14.0
10.72
9.58
8.61
7.80
7.11
6.51
5.99
5.54
5.14
4.79
4.48
4.20
3.95
3.64
0.91
3030
3710
3830
2.44
14.7
12.14
10.91
9.88
9.00
8.25
7.60
7.03
6.53
6.10
5.71
5.36
5.05
4.77
4.53
1.21
3770
4490
4420
2.47
16.4
16.53
15.05
13.80
12.72
11.78
10.97
10.25 9.62
9.05
8.55
8.10
7.69
7.32
6.98
1.52
3980
4940
4660
2.50
17.9
16.53
15.05
13.80
12.72
11.79
10.97
10.26 9.62
9.06
8.55
8.10
7.69
7.32
6.98
0.76
2560
3200
3310
2.65
17.1
11.76
10.51
9.45
8.56
7.80
7.14
6.57
6.0
5.64
5.25
4.91
4.61
4.33
3.99
0.91
2920
3590
3710
2.66
18.1
13.32
11.98
10.84
9.88
9.05
8.34
7,72
7,17
6.69
6.26
5.88
5.54
5.24
4.97
1.21
3630
4350
4310
2.70
20.1
18.14
16.52
15.14
1396
12.93
12.04
9.38
8.88
8.44
8.03 7.66
1.52
3890
4840
4560
2.73
21.8
18.14
16.52
15.14
13.96
12.93
12.04
9.39
8.89
8.44
8.03
7.66
0.76
2470
3110
3210
2.87
20.6
12.64
11.28
10.14
9.17
8.35
7.64
7.02
6.49
6.02
5.60
5.23
4.90
4.61
4.35
0.91
2830
3480
3600
2.89
21.8
14.51
13.05
11.81
10.76
9.86
9.08
8.41
7.81
7.29
6.82
6.41
6.04
5.71
5.40
1.21
3520
4220
4230
2.93
24.2
19.75
17.98
16.48
15.19
14.08
13.10
10.21 9.67
9.18
8.74
8.34
1.52
3810
4740
4470
2.96
26.2
19.75
17.98
17.83
16.48
15.19
14.08
10.82 10.21
9.67
9.46
8.34
0.76
2390
2980
3080
3.22
26.7
14.38
12.84
11.55
10.46
9.53
8.72
8.03
7.42
6.89
6.42
6.00
5.62
5.29 4.88
0.91
2740
3340
3450
3.23
28.2
16.28
14.63
13.25
12.07
11.06
10.19
9.43
8.76
8.17
7.65
7.19
6.77
6.40 6.06
1.21
3400
4040
4120
3.27
31.2
20.00
20.00
18.50
17.05
15.80
14.70
11.46 10.85
10.30
9.81
9.35
1.52
3710
4610
4350
3.3
33.7
20.00
20.00
18.50
17.06
15.80
14.71
11.47 10.86
10.31
9.81
9.36
0.76
2280
2790
2890
3.79
39.4
16.99
15.17
13.65
12.36
11.25
10.31
9.48
8.13
7.58
7.08
6.64
6.25
5.76
0.91
2600
3130
3240
3.80
41.5
19.24
17.29
15.65
14.26
13.07
12.04
9.04
8.49
8.00
7.56 7.16
1.21
3240
3800
3920
3.84
45.7
20.00
20.00
20.00
20.00
18.67
17.37
13.54 12.82
12.17
11.58 11.05
1.52
3560
4360
4180
3.87
49.3
20.00
20.00
20.00
20.00
18.67
17.38
13.54 12.83
12.18
11.59 11.05
0.76
2180
2640
2730
4.36
55.6
19.33
17.25
15.50
14.02 12.76
11.68
10.74 9.92
8.56
8.00
7.49
7.04
6.64
0.91
2490
2960
3060
4.37
58.5
20.00
19.96
18.07
16.46 15.08
13.89
10.43 9.80
9.23
8.72
8.26
1.21
3090
3590
3710
4.41
64.2
20.00
20.00
20.00
20.00 20.00
20.00
15.62 14.79
14.04
13.36 12.75
1.52
3400
4130
4040
4.44
69.1
20.00
20.00
20.00
20.00 20.00
20.00
15.62 14.79
14.04
13.36 12.75
140
150
160
175
200
8.77
225
9.20
15
Sales Offices
Dammam
Head Office, Plant & Sales Office
P.O. Box 877, Dammam 31421
Kingdom of S audi Arabia
Tel (966) 3 847 2129
Fax (966) 3 847 3581
Email: inf o@canamasia.com
Riyadh
P.O. Box 251, Riyadh 11411
Kingdom of S audi Arabia
Tel (966) 1 472 5555 Ext 204
Fax (966) 1 476 6729
Jedda h
P.O. Box 8076, Jeddah 21482
Kingdom of S audi Arabia
Tel (966) 2 660 0012
Fax (966) 2 660 9707
Dubai
P.O. Box 51327, Dubai
United Arab Emirates
Tel (971) 4 294 0424
Fax (971) 4 294 0434
Abu Dhabi
P.O. Box 32763, Abu Dhab i
United Arab Emirates
Tel (971) 2 627 7279
Fax (971) 2 627 7280
Doha
P.O. Box 22162, Doh a
Qatar
Tel (974) 486 9312 / 486 2589
Fax (974) 486 9319
Kuwait
P.O. Box 21540, Saf at
Kuwait City , Kuwait 13076
Tel (965) 484 8510
Fax (965) 484 8930
Ras Al-Khaymah
Plant and Sales Office
P.O. Box 31753, Ra s Al-Khaymah
United Arab Emirates
Tel (971) 7 227 0663 / 233 4095
Fax (871) 7 227 0664
Sales Offices
Quebec
Head Office, Plant & Sales Office
ISO 9001:2000, SJI, AISC, BCS ( 1 )
115, boulevard Canam Nord
Saint-Gd on, Beauce (Qu bec) G0M 1T0
Tel (418) 582 3331
Toll-free 1-888-849-5910
Fax (418) 582 3381
Quebec
200, boulevard Industriel
Bouch erv ille (Qub ec) J 4B 2X4
Tel (450) 641 8770
Toll-free 1-800-361-0203
Fax (450) 641 8769
Alberta
Plant & Sales Office - SJI, BCS ( 1 )
323 53 r d Av enue S.E.
Calgary, Alberta T2H 0N2
Tel (403) 252 7591
Toll-free 1-866-203-2001
Fax (403) 253 7708
Ontario
Plant & Sales Office - SJI, BCS ( 1 )
1739 Drew Road
Mississauga, Ontario L5S 1J 5
Tel (905) 671 3460
Toll-free 1-800-871-8876
Fax (905) 671 3924
Maryland
Head Office and P lant - SJI, AISC ( 1 )
4010 Clay Street. P.O. Box C -285
Point of Rock s, Mary land 21777 -0285
Tel (301) 874 5141
Toll-free 1-800-638-4293
Fax (301) 874 5685
Florida
Plant and Sales Office - SJI, AISC ( 1 )
140 S outh Ellis Road
Jacksonville, Florida 32254
Tel (904) 781 0898
Toll-free 1-888-781-0898
Fax (904) 781 2004
Missouri
Plant and Sales Office - SJI, AISC ( 1 )
2000 West Main Street
Wash ington, Missouri 63090 -1008
Tel (636) 239 6716
Fax (636) 239 4135
Washington
Plant and Sales Office - SJI, IAS ( 1 )
2002 Morgan Road
Sunnysid e, Wash ington 98944
Tel (509) 837 7008
Toll-free 1-877-786-2453
Fax (509) 839 0383
Massachusetts
50 Eastman Street
Easton , Massachu sett s 02 334-1245
Tel (508) 238 4500
Fax (508) 238 8253
Minnesota
14481 Fairway Driv e
Eden Prairie, Minn esot a 55344
Tel (952) 475 9165
Fax (952) 475 2710
New York
139 H awthorn e Way
Chitten ango, New York 13037 -1010
Tel (315) 687 5870
Fax (315) 687 3701
Ohio
30 Hill Road South
Pickerington, Ohio 43147
Tel (614) 920 0949
Fax (614) 920 0937
Oregon
2081 Holcomb Spring s Road
Gold H ill, Oregon 97525
Tel (541) 855 9057
Fax (541) 855 2027
Pennsylvania
3280 St. Andrews Drive
Chambersburg, Penn sylv ania 17201
Tel (717) 263 7432
Fax (717) 263 7542
1012 Hampst ead Road
Wynnewood, Penn sylv ania 19096
Tel (610) 896 4790
Fax (610) 896 4815
Texas
210 S ilentbluff D riv e
San Antonio, Texas 78216
Tel (210) 495 0105
Fax (210) 495 1476
Kansas
14521 West 86 t h Terrace
Lenexa, Kansas 66215
Tel (913) 384 9809
Fax (913) 384 9816
Maryland
P.O. Box 296
Phoenix, Maryland 21131-0296
Tel (410) 472 4327
Fax (410) 472 4827
16
Virginia
11008 Blake L ane
Bealeton, V irgin ia 22712
Tel (540) 439 1475
Fax (540) 439 1476
Washington
240 N.W. Gilman Boulevard, Su ite G
Issaquah, Washington 98027
Tel (425) 392 2935
Fax (425) 392 3149