Escolar Documentos
Profissional Documentos
Cultura Documentos
Specifications
Top Drive Model 1050E-500................................................................................................. 2-2
Specifications
Hydraulic Power Unit Model 1220 Twin................................................................................ 2-4
Torque vs. Amp Characteristics
Imperial Units........................................................................................................................ 2-5
Torque vs. Amp Characteristics
Metric Units........................................................................................................................... 2-6
Torque Curve ........................................................................................................................... 2-7
Recommended Make-Up Torque1 Values For Rotary Shouldered Drill Collar Connections.... 2-8
Metric Units - Table 2.1 ....................................................................................................... 2-8
Imperial Units - Table 2.2 .................................................................................................. 2-11
Recommended Minimum OD* and Make-Up Torque of Weld-On Type Tool Joints by Class 2-14
Metric Units - Table 2.3 ..................................................................................................... 2-14
Imperial Units - Table 2.4 .................................................................................................. 2-17
Revision 03.02
2-1
Specifications
Top Drive Model 1050E-500
Static Hoist Rating
Elevator Load Path
Quill Load Path
500 Tons
500 Tons
454 Tonnes
454 Tonnes
413 Tons
375 Tonnes
Electric Motor
Output Power
Continuous
Intermittent
1 130 HP
1 365 HP
Gear Ratio
5.000:1
125-01
Brake Capacity
30 000 ft-lb
40 700 Nm
33 300 ft-lb
45 100 Nm
24 000 ft-lb
37 500 ft-lb
32 500 Nm
50 800 Nm
70 800 ft-lb
96 000 Nm
43.25 inches
Quill Connection
6-5/8 Reg.
3.0 inches
7.6 cm
5 000 PSI
34 500 KPa
7 500 PSI
51 700 KPa
8.0 inches
20 cm
8.0 inches
20 cm
2-2
840 KW
1 020 KW
110 cm
Revision 03.02
Specifications
Top Drive Model 1050E-500
(Continued from previous page.)
Cooling System
Lubrication System
Hydraulic Requirement
Electrical Power
1 250 Amps
1 435 Amps
750 VDC
Field Supply
Revision 03.02
28 000 lb
12 700 Kg
2-3
Specifications
Hydraulic Power Unit Model 1220 Twin
Style
Twin
20 HP
Pumps (Quantity: 2)
Pressure
2 350 PSI
16 000 KPa
13 GPM
49 l/min
Motors (Quantity: 2)
Reservoir Capacity
15 KW
225 litres
Filtration
Cooling
Air to oil
5 HP capacity at 77F temp rise
3.7 KW capacity at 25C temp rise
Other features
Dimensions:
Length
Width
Height
Weight:
Dry
Wet
2-4
69 inches
36 inches
60 inches
175 cm
91 cm
152 cm
47 inches 120 cm
29 inches 72 cm
87 inches 220 cm
710 Kg
890 Kg
Revision 03.02
0
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1 000
1 050
1 100
1 150
1 200
1 250
1 300
1 350
1 400
1 450
Low Speed
60 Amp
Field Current
Medium Speed
40 Amp
Field Current
High Speed
30 Amp
Field Current
0
1 000
2 100
3 400
4 700
6 000
7 300
8 600
9 800
11 100
12 400
13 600
14 800
16 100
17 300
18 500
19 700
20 900
22 000
23 200
24 400
25 500
26 600
27 800
28 900
30 000
31 100
32 200
33 300
34 400
0
1 000
2 000
3 100
4 200
5 400
6 500
7 600
8 800
9 800
10 900
12 000
13 000
14 000
15 100
16 100
17 100
18 000
19 000
19 800
20 800
21 600
22 400
23 300
24 100
24 900
25 700
26 500
27 200
28 000
0
1 000
2 000
3 000
4 000
4 900
5 800
6 800
7 800
8 700
9 600
10 500
11 400
12 200
13 000
13 800
14 600
15 300
16 000
16 700
17 400
18 000
18 600
19 200
19 800
20 300
20 800
21 300
21 800
22 200
x-500-HSH
Revision 01.09
2-5
0
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1 000
1 050
1 100
1 150
1 200
1 250
1 300
1 350
1 400
1 450
Low Speed
60 Amp
Field Current
Medium Speed
40 Amp
Field Current
High Speed
30 Amp
Field Current
0
1 400
2 800
4 600
6 400
8 100
9 900
11 600
13 400
15 100
16 800
18 500
20 100
21 800
23 500
25 100
26 700
28 300
29 900
31 500
33 000
34 600
36 100
37 600
39 100
40 600
42 100
43 600
45 100
46 600
0
1 400
2 700
4 200
5 800
7 300
8 800
10 300
11 900
13 300
14 800
16 200
17 600
19 000
20 500
21 800
23 200
24 400
25 700
26 900
28 100
29 300
30 400
31 600
32 700
33 800
34 800
35 900
36 900
38 000
0
1 400
2 700
4 000
5 400
6 600
7 900
9 200
10 500
11 800
13 000
14 300
15 500
16 600
17 700
18 700
19 800
20 700
21 700
22 600
23 600
24 400
25 200
26 000
26 800
27 500
28 300
28 900
29 500
30 100
x-500-HSH
2-6
Revision 01.09
600
800
1000
1200
1400
1600
TORQUE-AMP CHARACTERISTIC
50
CONTINUOUS
100
200
150
FIELD CURRENT 30 A
(High Speed Setting)
FIELD CURRENT 40 A
(Medium Speed Setting)
250
TORQUE-SPEED LIMITATIONS
INTERMITTENT
CONTINUOUS
INTERMITTENT
FIELD CURRENT 60 A
(Low Speed Setting)
CONTINUOUS
INTERMITTENT
S-125-01
300
4000
12000
16000
20000
24000
28000
32000
4000
400
FIELD CURRENT 30 A
(High Speed Setting)
FIELD CURRENT 40 A
(Medium Speed Setting)
FIELD CURRENT 60 A
(Low Speed Setting)
36000
8000
200
CONTINUOUS
30000 ft-lb @ 1250 AMPS
INTERMITTENT
33700 ft-lb @ 1420 AMPS
MOMENTARY LIMIT
35500 ft-lb @ 1500 AMPS
8000
12000
16000
20000
24000
28000
32000
36000
Revision 01.09
Torque Curve
5.000:1 Gear Ratio
x-500-HSH
2-7
Recommended Make-Up Torque Values For Rotary Shouldered Drill Collar Connections
Metric Units - Table 2.1
(See footnotes for use of this table on page 2-10.)
1
2
Connection
Size, mm
Type
OD, mm
API
NC 23
76.20
79.38
82.55
60.33
Regular
73.03
7
8
9
10
Minimum Make-up Torque N/m2
Bore of Drill Collar, millimeters
44.5
50.8
57.2
63.5
25.4
31.8
38.1
*3 469
*4 605
5 532
*3 469
*4 605
4 684
* 3 469
3 661
3 661
76.20
79.38
82.55
*3 099
*4 188
4 543
*3 099
3 560
3 560
2 419
2 419
2 419
PAC3
76.20
79.38
82.55
*5 251
*6 868
7 200
*5 251
5 741
5 741
4 047
4 047
4 047
60.33
API IF
NC 26
88.90
95.25
*6 370
7 608
*6 370
6 456
5 113
5 113
73.03
Regular
88.90
95.25
98.43
*5 308
7 974
7 974
*5 308
6 847
6 847
*5 308
5 535
5 535
API
11
71.4
73.03
Slim Hole
73.03
88.90
73.03
Extra Hole
Dbl. Streamline
Mod. Open
95.25
98.43
104.78
*5 655
*7 402
*11 146
*5 655
*7 402
*11 146
*5 655
*7 402
10 280
73.03
API IF
NC 31
98.43
104.78
*6 417
*10 220
*6 417
*10 220
*6 417
*10 220
*6 417
9 478
88.90
Regular
104.78
107.95
114.30
*8 942
*10 906
14 481
*8 942
*10 906
13 158
*8 942
*10 906
11 609
*8 942
9 840
9 840
7 862
7 862
7 862
88.90
Slim Hole
107.95
114.30
*12 251
14 226
*12 251
12 872
11 287
11 287
9 478
9 478
7 456
7 456
NC 35
114.30
120.65
127.00
*12 500
16 974
16 974
*12 500
14 972
14 972
*12 500
12 726
12 726
10 249
10 249
10 249
88.90
101.60
88.90
Extra Hole
Slim Hole
Mod. Open
107.95
114.30
120.65
127.00
133.35
*7 138
*11 726
*16 698
18 370
18 370
*7 138
*11 726
16 324
16 324
16 324
*7 138
*11 726
14 029
14 029
14 029
7 138
11 494
11 494
11 494
11 494
88.90
114.30
API IF
NC 38
Slim Hole
120.65
127.00
133.35
139.70
*13 811
*19 291
22 414
22 414
*13 811
*19 291
20 251
20 251
*13 811
17 850
17 850
17 850
*13 811
15 181
15 181
15 181
11 500
11 500
11 500
11 500
88.90
H-904
120.65
127.00
133.35
139.70
*12 151
*17 694
23 641
25 616
*12 151
*17 694
23 413
23 413
*12 151
*17 694
20 934
20 934
*12 151
*17 694
18 188
18 188
*12 151
14 394
14 394
14 394
101.60
Full Hole
NC 40
Mod. Open
Dbl. Streamline
127.00
133.35
139.70
146.05
152.40
*15 089
*21 146
27 639
28 405
28 405
*15 089
*21 146
26 119
26 119
26 119
*15 089
*21 146
23 550
23 550
23 550
*15 089
20 702
20 702
20 702
20 702
*15 089
16 769
16 769
16 769
16 769
H-904
133.35
139.70
146.05
152.40
158.75
*17 412
*24 066
*31 160
35 139
35 139
*17 412
*24 066
*31 160
32 737
32 737
*17 412
*24 066
30 030
30 030
30 030
*17 412
*24 066
27 028
27 028
27 028
*17 412
22 869
22 869
22 869
22 869
API Regular
139.70
146.05
152.40
158.75
*21 542
*28 502
35 138
35 138
*21 542
*28 502
32 758
32 758
*21 542
*28 502
30 079
30 079
*21 542
27 108
27 108
27 108
*21 542
22 998
22 998
22 998
NC 44
146.05
152.40
158.75
165.10
*28 898
*36 584
37 756
37 756
*28 898
35 280
35 280
35 280
*28 898
32 491
32 491
32 491
*28 898
29 398
29 398
29 398
25 117
25 117
25 117
25 117
139.70
146.05
152.40
158.75
165.10
*17 942
*25 059
*32 646
37 748
37 748
*17 942
*25 059
*32 646
34 951
34 951
*17 942
*25 059
30 465
30 465
30 465
*17 942
*25 059
27 551
27 551
27 551
API
API
API
API
101.60
114.30
114.30
API
114.30
12
76.2
13
95.3
*17 942
24 756
24 756
24 756
24 756
2-8
Revision 03.02
Recommended Make-Up Torque Values For Rotary Shouldered Drill Collar Connections
Metric Units - Table 2.1
(Continued from previous page. See footnotes for use of this table on page 2-10.)
1
Size, mm
2
Connection
Type
OD, mm
6
7
8
Minimum Make-up Torque N/m2
Bore of Drill Collar, millimeters
71.4
76.2
57.2
63.5
114.30
API
101.60
114.30
127.00
114.30
Extra Hole
NC 46
API IF
Semi IF
Dbl. Streamline
Mod. Open
146.05
152.40
158.75
165.10
171.45
*24 532
*32 393
38 753
38 753
38 753
*24 532
*32 393
35 510
35 510
35 510
*24 532
31 015
31 015
31 015
31 015
*24 532
28 090
28 090
28 090
28 090
114.30
H-904
146.05
152.40
158.75
165.10
171.45
*24 920
*32 751
39 736
39 736
39 736
*24 920
*32 751
36 507
36 507
36 507
*24 920
32 029
32 029
32 029
32 029
*24 920
29 114
29 114
29 114
29 114
127.00
H-904
158.75
165.10
171.45
177.80
*35 073
*44 111
48 809
48 809
*35 073
*44 111
45 397
45 397
*35 073
40 660
40 660
40 660
*35 073
37 572
37 572
37 572
33 175
33 175
33 175
33 175
114.30
API
127.00
127.00
139.70
127.00
API IF
NC 50
Extra Hole
Mod. Open
Dbl. Streamline
Semi IF
158.75
165.10
171.45
177.80
184.15
190.50
*31 815
*41 046
*50 814
53 078
53 078
53 078
*31 815
*41 046
49 545
49 545
49 545
49 545
*31 815
*41 046
44 639
44 639
44 639
44 639
*31 815
*41 046
41 443
41 443
41 443
41 453
*31 815
36 892
36 892
36 892
36 892
36 892
139.70
H-904
171.45
177.80
184.15
190.50
*47 725
*58 076
59 080
59 080
*47 725
55 482
55 482
55 482
*47 725
50 481
50 481
50 481
47 218
47 218
47 218
47 218
42 570
42 570
42 570
42 570
139.70
API Regular
171.45
177.80
184.15
190.50
*44 174
*54 516
58 751
58 751
*44 174
*54 516
55 135
55 135
*44 174
50 113
50 113
50 113
*44 174
46 839
46 839
46 839
42 175
42 175
42 175
42 175
139.70
177.80
184.15
190.50
196.85
*45 310
*56 700
*68 681
75 394
*45 310
*56 700
*68 681
71 483
*45 310
*56 700
66 047
66 047
*45 310
*56 700
62 498
62 498
*45 310
*56 700
57 440
57 440
NC 56
184.15
190.50
196.85
203.20
*56 009
*67 850
72 075
72 075
*56 009
66 690
66 690
66 690
*56 009
63 175
63 175
63 175
*56 009
58 166
58 166
58 166
168.28
API Regular
190.50
196.85
203.20
209.55
*64 170
*76 932
79 375
79 375
*64 170
73 778
73 778
73 778
*64 170
70 124
70 124
70 124
*64 170
64 912
64 912
64 912
168.28
H-904
190.50
196.85
203.20
209.55
*64 322
*77 044
83 424
83 424
*64 322
*77 044
77 826
77 826
*64 322
74 169
74 169
74 169
*64 322
68 949
68 949
68 949
API
NC 61
203.20
209.55
215.90
222.25
228.60
*76 246
*90 501
100 503
100 503
100 503
*76 246
*90 501
94 594
94 594
94 594
*76 246
*90 501
90 734
90 734
90 734
*76 246
85 226
85 226
85 226
85 226
139.70
API IF
203.20
209.55
215.90
222.25
228.60
234.95
*78 335
*92 845
103 208
103 208
103 208
103 208
*78 335
*92 845
97 193
97 193
97 193
97 193
*78 335
*92 845
93 264
93 264
93 264
93 264
*78 335
87 656
87 656
87 656
87 656
87 656
*78 335
81 634
81 634
81 634
81 634
81 634
168.28
215.90
222.25
228.60
234.95
241.30
*93 752
*110 009
122 509
122 509
122 509
*93 752
*110 009
116 161
116 161
116 161
*93 752
*110 009
112 011
112 011
112 011
*93 752
106 084
106 084
106 084
106 084
*93 752
99 717
99 717
99 717
99 717
92 915
92 915
92 915
92 915
92 915
API
NC 70
228.60
234.95
241.30
247.65
254.00
260.35
*104 805
*122 813
141 556
157 261
157 261
157 261
*104 805
*122 813
141 556
150 527
150 527
150 527
*104 805
*122 813
141 556
146 124
146 124
146 124
*104 805
*122 813
139 831
139 831
139 831
139 831
*104 805
*122 813
133 064
133 064
133 064
133 064
*104 805
*122 813
125 831
125 831
125 831
125 831
API
NC 77
254.00
260.35
266.70
273.05
279.40
*149 632
*171 563
194 299
213 393
213 393
*149 632
*171 563
194 299
206 019
206 019
*149 632
*171 563
194 299
201 193
201 193
*149 632
*171 563
194 295
194 295
194 295
*149 632
*171 563
186 870
186 870
186 870
*149 632
*171 563
178 926
178 926
178 926
177.80
H-904
203.20
209.55
215.90
*73 927
*88 150
*103 003
*73 927
*88 150
99 667
*73 927
*88 150
95 793
*73 927
*88 150
90 264
*73 927
84 323
84 323
*73 927
77 976
77 976
API
82.6
10
88.9
95.3
Revision 03.02
2-9
Recommended Make-Up Torque Values For Rotary Shouldered Drill Collar Connections
Metric Units - Table 2.1
(Continued from previous page. See footnotes for use of this table.)
1
Size, mm
2
Connection
Type
OD, mm
57.2
63.5
6
7
8
Minimum Make-up Torque N/m2
Bore of Drill Collar, millimeters
71.4
76.2
82.5
10
88.9
95.3
193.68
API Regular
215.90
222.25
228.60
234.95
241.30
*83 536
*99 810
*116 783
133 184
133 184
*83 536
*99 810
*116 783
126 728
126 728
*83 536
*99 810
*116 783
122 506
122 506
*83 536
*99 810
116 478
116 478
116 478
*83 536
*99 810
109 998
109 998
109 998
*83 536
*99 810
103 074
103 074
103 074
193.68
H-904
228.60
234.95
241.30
*100 983
*118 946
*137 620
*100 983
*118 946
*137 620
*100 983
*118 946
*137 620
*100 983
*118 946
*137 620
*100 983
*118 946
*137 620
*100 983
*118 946
133 162
219.08
API Regular
254.00
260.35
266.70
*151 224
*173 239
*196 064
*151 224
*173 239
*196 064
*151 224
*173 239
195 188
*151 224
*173 239
188 290
*151 224
*173 239
180 865
*151 224
172 922
172 922
219.08
H-904
260.35
266.70
*156 946
*179 877
*156 946
*179 877
*156 946
*179 877
*156 946
*179 877
*156 946
*179 877
*156 946
*179 877
177.80
H-90
(with low torque face)
222.25
228.60
*94 128
102 667
*94 128
98 692
93 016
93 016
86 915
86 915
80 395
80 395
193.68
API Regular
(with low torque face)
234.95
241.30
247.65
254.00
*101 096
*119 578
126 944
126 944
*101 096
*119 578
120 725
120 725
*101 096
114 038
114 038
114 038
*101 096
106 891
106 891
106 891
193.68
H-904
(with low torque face)
247.65
254.00
260.35
266.70
*126 775
*146 958
157 456
157 456
*126 775
*146 958
151 007
151 007
*126 775
144 068
144 068
144 068
*126 775
136 646
136 646
136 646
219.08
API Regular
(with low torque face)
273.05
279.40
285.75
*156 117
*180 719
204 153
*156 117
*180 719
196 981
*156 117
*180 719
189 258
*156 117
*180 719
180 995
219.08
H-904
(with low torque face)
273.05
279.40
285.75
*128 564
*153 210
*178 688
*128 564
*153 210
*178 688
*128 564
*153 210
*178 688
*128 564
*153 210
*178 688
*126 775
*146 958
161 966
161 966
Notes:
Torque figures preceded by an asterisk (*) indicate that the weaker member for the corresponding outside diameter (OD) and bore
is the BOX. For all other torque values the weaker member is the PIN.
In each connection size and type group, torque values apply to all connection types in this group, when used with the same drill
collar OD and bore, i.e. 2 3/8 API IF, API NC26 and 2 7/8 Slim Hole connections used with 3 1/2 X 1 1.4 drill collars all have the
same minimum make-up torque of 4600 ft-lb, and the BOX is the weaker member.
Basis of calculations for recommended make-up torque assumed the use of a thread compound containing 40-60% by weight of finely
powdered metallic zinc or 60% by weight of finely powdered metallic lead, with not more than 0.3% total active sulfur (Reference the
caution below.) applied thoroughly to all threads and shoulders.
Normal torque range is tabulated value plus 10%. Higher torque values may be used in extreme conditions.
Make-up torque for 2 7/8 PAC connection is based on 87 500 psi stress and other factors listed in footnote 1.
Make-up torque for H-90 connection is based on 56 200 psi stress and other factor listed in footnote 1.
CAUTION: Thread compounds made according to API Bul 5A2 will produce excess make-up
and are not recommended for use on rotary shouldered connections.
This information has been duplicated in its entirety from API RP 7G Table 14 and API Spec. 7, Appendix F
and is current as of the publication of this Manual. However, it is likely that the data will be updated several
times during the life of a Top Drive unit. Consult API Recommended Practices or IADC Drilling Manual to be
certain that this information is current.
2-10
Revision 03.02
Size, in.
2
Connection
OD, in.
7
8
9
10
Minimum Make-up Torque ft-lb2
Bore of Drill Collar, inches
1 3/4
2
2 1/4
2 1/2
1 1/4
1 1/2
*2 508
*3 330
4 000
*2 508
*3 330
3 387
*2 508
2 647
2 647
3
3 1/8
3 1/4
*2 241
*3 028
3 285
*2 241
2 574
2 574
1 749
1 749
1 749
PAC3
3
3 1/8
3 1/4
*3 797
*4 966
5 206
*3 797
4 151
4 151
2 926
2 926
2 926
2 3/8
API
API IF
NC 26
3 1/2
3 3/4
*4 606
5 501
*4 606
4 668
3 697
3 697
2 7/8
Regular
3 1/2
3 3/4
3 7/8
*3 838
5 766
5 766
*3 838
4 951
4 951
*3 838
4 002
4 002
API
Type
NC 23
3
3 1/8
3 1/4
2 3/8
Regular
2 7/8
11
2 13/16
2 7/8
Slim Hole
2 7/8
3 1/2
2 7/8
Extra Hole
Dbl. Streamline
Mod. Open
3 3/4
3 7/8
4 1/8
*4 089
*5 352
*8 059
*4 089
*5 352
*8 059
*4 089
*5 352
7 433
2 7/8
API
API IF
NC 31
3 7/8
4 1/8
*4 640
*7 390
*4 640
*7 390
*4 640
*7 390
*4 640
6 853
3 1/2
Regular
4 1/8
4 1/4
4 1/2
*6 466
*7 886
10 471
*6 466
*7 886
9 514
*6 466
*7 886
8 394
*6 466
7 115
7 115
5 685
5 685
5 685
3 1/2
Slim Hole
4 1/4
4 1/2
*8 858
10 286
*8 858
9 307
8 161
8 161
6 853
6 853
5 391
5 391
NC 35
4 1/2
4 3/4
5
*9 038
12 273
12 273
*9 038
10 826
10 826
*9 038
9 202
9 202
7 411
7 411
7 411
3 1/2
4
3 1/2
Extra Hole
Slim Hole
Mod. Open
4 1/4
4 1/2
4 3/4
5
5 1/4
*5 161
*8 479
*12 074
13 283
13 283
*5 161
*8 479
11 803
11 803
11 803
*5 161
*8 479
10 144
10 144
10 144
*5 161
8 311
8 311
8 311
8 311
3 1/2
API
4 1/2
API IF
NC 38
Slim Hole
4 3/4
5
5 1/4
5 1/2
*9 986
*13 949
16 207
16 207
*9 986
*13 949
14 643
14 643
*9 986
12 907
12 907
12 907
*9 986
10 977
10 977
10 977
8 315
8 315
8 315
8 315
3 1/2
H-904
4 3/4
5
5 1/4
5 1/2
*8 786
*12 794
*17 094
18 522
*8 786
*12 794
16 929
16 929
*8 786
*12 794
15 137
15 137
*8 786
*12 794
13 151
13 151
*8 786
10 408
10 408
10 408
4
API
4
4 1/2
Full Hole
NC 40
Mod. Open
Dbl. Streamline
5
5 1/4
5 1/2
5 3/4
6
*10 910
*15 290
*19 985
20 539
20 539
*10 910
*15 290
18 886
18 886
18 886
*10 910
*15 290
17 028
17 028
17 028
*10 910
14 969
14 969
14 969
14 969
*10 910
12 125
12 125
12 125
12 125
H-904
5 1/4
5 1/2
5 3/4
6
6 1/4
*12 590
*17 401
*22 531
25 408
25 408
*12 590
*17 401
*22 531
23 671
23 671
*12 590
*17 401
21 714
21 714
21 714
*12 590
*17 401
19 543
19 543
19 543
*12 590
16 536
16 536
16 536
16 536
API Regular
5 1/2
5 3/4
6
6 1/4
*15 576
*20 609
25 407
25 407
*15 576
*20 609
23 686
23 686
*15 576
*20 609
21 749
21 749
*15 576
19 601
19 601
19 601
*15 576
16 629
16 629
16 629
NC 44
5 3/4
6
6 1/4
6 1/2
*20 895
*26 453
27 300
27 300
*20 895
25 510
25 510
25 510
*20 895
23 493
23 493
23 493
*20 895
21 257
21 257
21 257
18 161
18 161
18 161
18 161
5 1/2
5 3/4
6
6 1/4
6 1/2
*12 973
*18 119
*23 605
27 294
27 294
*12 973
*18 119
*23 605
25 272
25 272
*12 973
*18 119
23 028
22 028
22 028
*12 973
*18 119
19 921
19 921
19 921
API
4 1/2
API
4 1/2
12
13
3 3/4
*12 973
17 900
17 900
17 900
17 900
Revision 03.02
2-11
Size, in.
2
Connection
OD, in.
6
7
8
Minimum Make-up Torque ft-lb2
Bore of Drill Collar, inches
2 13/16
3
3 1/4
10
2 1/4
2 1/2
4 1/2
API
4
4 1/2
5
4 1/2
Extra Hole
NC 46
API IF
Semi IF
Dbl. Streamline
Mod. Open
5 3/4
6
6 1/4
6 1/2
6 3/4
*17 738
*23 422
28 021
28 021
28 021
*17 738
*23 422
25 676
25 676
25 676
*17 738
22 426
22 426
22 426
22 426
*17 738
20 311
20 311
20 311
20 311
4 1/2
H-904
5 3/4
6
6 1/4
6 1/2
6 3/4
*18 019
*23 681
28 732
28 732
28 732
*18 019
*23 681
26 397
26 397
26 397
*18 019
23 159
23 159
23 159
23 159
*18 019
21 051
21 051
21 051
21 051
H-904
6 1/4
6 1/2
6 3/4
7
*25 360
*31 895
35 292
35 292
*25 360
*31 895
32 825
32 825
*25 360
29 400
29 400
29 400
*25 360
27 167
27 167
27 167
23 988
23 988
23 988
23 988
4 1/2
API
5
5
5 1/2
5
API IF
NC 50
Extra Hole
Mod. Open
Dbl. Streamline
Semi IF
6 1/4
6 1/2
6 3/4
7
7 1/4
7 1/2
*23 004
*29 679
*36 742
38 379
38 379
38 379
*23 004
*29 679
35 824
35 824
35 824
35 824
*23 004
*29 679
32 277
32 277
32 277
32 277
*23 004
*29 679
29 966
29 966
29 966
29 973
*23 004
26 675
26 675
26 675
26 675
26 675
5 1/2
H-904
6 3/4
7
7 1/4
7 1/2
*34 508
*41 993
42 719
42 719
*34 508
40 117
40 117
40 117
*34 508
36 501
36 501
36 501
34 142
34 142
34 142
34 142
30 781
30 781
30 781
30 781
5 1/2
API Regular
6 3/4
7
7 1/4
7 1/2
*31 941
*39 419
42 481
42 481
*31 941
*39 419
39 866
39 866
*31 941
36 235
36 235
36 235
*31 941
33 868
33 868
33 868
30 495
30 495
30 495
30 495
5 1/2
7
7 1/4
7 1/2
7 3/4
*32 762
*40 998
*49 661
54 515
*32 762
*40 998
*49 661
51 687
*32 762
*40 998
47 756
47 756
*32 762
*40 998
45 190
45 190
*32 762
*40 998
41 533
41 533
NC 56
7 1/4/
7 1/2
7 3/4
8
*40 498
*49 060
52 115
52 115
*40 498
48 221
48 221
48 221
*40 498
45 680
45 680
45 680
*40 498
42 058
42 058
42 058
6 5/8
API Regular
7 1/2
7 3/4
8
8 1/4
*46 399
*55 627
57 393
57 393
*46 399
53 346
53 346
53 346
*46 399
50 704
50 704
50 704
*46 399
46 936
46 936
46 936
6 5/8
H-904
7 1/2
7 3/4
8
8 1/4
*46 509
*55 708
60 321
60 321
*46 509
*55 708
56 273
56 273
*46 509
53 629
53 629
53 629
*46 509
49 855
49 855
49 855
API
NC61
8
8 1/4
8 1/2
8 3/4
9
*55 131
*65 438
72 670
72 670
72 670
*55 131
*65 438
68 398
68 398
68 398
*55 131
*65 438
65 607
65 607
65 607
*55 131
61 624
61 624
61 624
61 624
5 1/2
API IF
8
8 1/4
8 1/2
8 3/4
9
9 1/4
*56 641
*67 133
74 626
74 626
74 626
74 626
*56 641
*67 133
70 277
70 277
70 277
70 277
*56 641
*67 133
67436
67436
67436
67436
*56 641
63 381
63 381
63 381
63 381
63 381
*56 641
59 027
59 027
59 027
59 027
59 027
6 5/8
8 1/2
8 3/4
9
9 1/4
9 1/2
*67 789
*79 544
88 582
88 582
88 582
*67 789
*79 544
83 992
83 992
83 992
*67 789
*79 544
80 991
80 991
80 991
*67 789
76 706
76 706
76 706
76 706
*67 789
72 102
72 102
72 102
72 102
67 184
67 184
67 184
67 184
67 184
API
NC 70
9
9 1/4
9 1/2
9 3/4
10
10 1/4
*75 781
*88 802
*102 354
113 710
113 710
113 710
*75 781
*88 802
*102 354
108 841
108 841
108 841
*75 781
*88 802
*102 354
105 657
105 657
105 657
*75 781
*88 802
101 107
101 107
101 107
101 107
*75 781
*88 802
96 214
96 214
96 214
96 214
*75 781
*88 802
90 984
90 984
90 984
90 984
API
NC77
10
10 1/4
10 1/2
10 3/4
11
*108 194
*124 051
*140 491
154 297
154 297
*108 194
*124 051
*140 491
148 965
148 965
*108 194
*124 051
*140 491
145 476
145 476
*108 194
*124 051
140 488
140 488
140 488
*108 194
*124 051
135 119
135 119
135 119
*108 194
*124 051
129 375
129 375
129 375
H-904
8
8 1/4
8 1/2
*53 454
*63 738
*74 478
*53 454
*63 738
72 066
*53 454
*63 738
69 265
*53 454
*63 738
65 267
*53 454
60 971
60 971
*53 454
56 382
56 382
API
Type
3 1/2
3 3/4
2-12
Revision 03.02
Size, in.
2
Connection
Type
OD, in.
2 1/2
10
3 1/2
3 3/4
7 5/8
API Regular
8 1/2
8 3/4
9
9 1/4
9 1/2
*60 402
*72 169
*84 442
96 301
96 301
*60 402
*72 169
*84 442
91 633
91 633
*60 402
*72 169
*84 442
88 580
88 580
*60 402
*72 169
84 221
84 221
84 221
*60 402
*72 169
79 536
79 536
79 536
*60 402
*72 169
74 529
74 529
74 529
7 5/8
H-904
9
9 1/4
9 1/2
*73 017
*86 006
*99 508
*73 017
*86 006
*99 508
*73 017
*86 006
*99 508
*73 017
*86 006
*99 508
*73 017
*86 006
*99 508
*73 017
*86 006
96 285
8 5/8
API Regular
10
10 1/4
10 1/2
*109 345
*125 263
*141 767
*109 345
*125 263
*141 767
*109 345
*125 263
141 134
*109 345
*125 263
136 146
*109 345
*125 263
130 777
*109 345
125 034
125 034
8 5/8
H-904
10 1/4
10 1/2
*113 482
*130 063
*113 482
*130 063
*113 482
*130 063
*113 482
*130 063
*113 482
*130 063
*113 482
*130 063
*68 061
74 235
*68 061
71 361
67 257
67 257
62 845
62 845
58 131
58 131
*73 099
*86 463
91 789
91 789
*73 099
*86 463
87 292
87 292
*73 099
82 457
82 457
82 457
*73 099
77 289
77 289
77 289
*91 667
*106 260
113 851
113 851
*91 667
*106 260
109188
109188
*91 667
104 171
104 171
104 171
*91 667
98 804
98 804
98 804
2 1/4
6
7
8
Minimum Make-up Torque ft-lb2
Bore of Drill Collar, inches
2 13/16
3
3 1/4
H-90
8 3/4
(with low torque face) 9
7 5/8
API Regular
9 1/4
(with low torque face) 9 1/2
9 3/4
10
7 5/8
H-904
9 3/4
(with low torque face) 10
10 1/4
10 1/2
8 5/8
API Regular
10 3/4
(with low torque face) 11
11 1/4
*112 883
*130 672
147 616
*112 883
*130 672
142 430
*112 883
*130 672
136 846
*112 883
*130 672
130 871
8 5/8
H-904
10 3/4
(with low torque face) 11
11 1/4
*92 960
*110 781
*129 203
*92 960
*110 781
*129 203
*92 960
*110 781
*129 203
*92 960
*110 781
*129 203
*91 667
*106 260
117 112
117 112
Notes:
Torque figures preceded by an asterisk (*) indicate that the weaker member for the corresponding outside diameter (OD) and bore
is the BOX. For all other torque values the weaker member is the PIN.
In each connection size and type group, torque values apply to all connection types in this group, when used with the same drill
collar OD and bore, i.e. 2 3/8 API IF, API NC26 and 2 7/8 Slim Hole connections used with 3 1/2 X 1 1.4 drill collars all have the
same minimum make-up torque of 4600 ft-lb, and the BOX is the weaker member.
Basis of calculations for recommended make-up torque assumed the use of a thread compound containing 40-60% by weight of finely
powdered metallic zinc or 60% by weight of finely powdered metallic lead, with not more than 0.3% total active sulfur (Reference the
caution below.) applied thoroughly to all threads and shoulders.
2
Normal torque range is tabulated value plus 10%. Higher torque values may be used in extreme conditions.
Make-up torque for 2 7/8 PAC connection is based on 87 500 psi stress and other factors listed in footnote 1.
Make-up torque for H-90 connection is based on 56 200 psi stress and other factor listed in footnote 1.
CAUTION: Thread compounds made according to API Bul 5A2 will produce excess make-up
and are not recommended for use on rotary shouldered connections.
This information has been duplicated in its entirety from API RP 7G Table 14 and API Spec7, Appendix F
and is current as of the publication of this Manual. However, it is likely that the data will be updated several
times during the life of a Top Drive unit. Consult API Recommended Practices or IADC Drilling Manual to be
certain that this information is current.
Revision 03.02
2-13
2
Drill Pipe
NomWt.
Kg/m
Type
Upset
and
Grade
Connection
5
6
New Tool Joint Data
New OD
New ID
mm
mm
Make-up
Torque6
mm
9
10
Premium Class
Min OD
Min Box
Make-up
Tool Joint
Shoulder
Torque for
mm.
with
Min OD
Eccentric
Tool Joint
Wear
N-m
mm
79.38
1.19
2,690
77.79
1.59
2,758
76.20
1.59
2,531
75.41
1.59
2,760
11
Min OD
Tool Joint
mm
78.58
76.99
75.41
74.61
12
13
Class 2
Min Box
Make-up
Shoulder
Torque for
with
Min OD
Eccentric
Tool Joint
Wear
N-m
mm
0.79
2,336
1.19
2,415
1.19
2,198
1.19
2,387
60.33
0.67
0.67
0.67
0.67
EU 75
EU 75
EU 75
EU 75
NC 26
W.O.
2 3/8 ONLW
2 3/8 SL-H90
85.73
85.73
79.38
82.55
44.45
50.80
50.80
50.80
5,705
3,576
3,752
4,251
B
P
P
P
60.33
0.92
0.92
0.92
0.92
IU 75
EU 75
EU 75
EU 75
2 3/8 PAC2
NC 26
2 3/8 SL-H90
2 3/8 OHSW
73.03
85.73
82.55
82.55
34.93
44.45
50.80
44.45
3,890
5,705
4,251
5,381
P
B
P
B
70.64
80.96
76.99
77.79
3.57
1.98
2.38
2.38
3,395
3,412
3,525
3,214
69.06
80.17
75.41
76.99
2.78
1.59
1.59
1.98
2,842
3,048
2,760
2,870
60.33
0.92
EU 95
NC 26
85.73
44.45
5,705 B
82.55
2.78
4,156
81.76
2.38
3,781
85.73
44.45
5,705 B
83.34
3.18
4,535
82.55
2.78
4,156
60.33
0.92
EU 105
NC 26
73.03
0.95
0.95
0.95
0.95
EU 75
EU 75
EU 75
EU 75
NC 31
2 7/8 WO
2 7/8 OHLW 2
2 7/8 SL-H90
104.78
104.78
95.25
98.43
53.98
61.91
61.91
61.91
9,850
5,972
4,634
6,327
P
P
P
P
93.66
92.08
88.90
88.90
1.98
1.98
2.78
2.38
4,362
4,448
4,560
4,698
254.79
91.28
87.31
87.31
1.59
1.59
1.98
1.59
3,878
3,978
3,687
3,687
73.03
1.44
1.44
1.44
1.44
1.44
1.44
EU 75
IU 75
IU 75
EU 75
EU 75
IU 75
NC 31
2 7/8 XH
NC 262
2 7/8 OHSW 2
2 7/8 SL-H90
2 7/8 PAC2
104.78
107.95
85.73
98.43
98.43
79.38
53.98
47.63
44.45
54.77
54.77
38.10
9,850
11,021
5,705
7,288
9,367
4,756
P
P
B
P
P
P
96.84
94.46
85.73
91.28
91.28
79.38
3.57
3.57
4.37
3.97
3.57
5.95
6,358
6,026
5,705
5,910
6,264
4,756
95.25
92.87
84.93
90.49
89.69
79.38
2.78
2.78
3.97
2.78
2.78
5.95
5,348
5,067
5,309
5,450
5,214
4,756
73.03
1.44
1.44
EU 95
EU 95
NC 31
2 7/8 SL-H902
104.78
98.43
50.80
54.77
10,951 P
9,367 P
99.22
93.66
4.76
4.76
7,919
7,886
97.63
92.08
3.97
3.97
6,872
6,797
73.03
1.44
EU 105
NC 31
104.78
50.80
10,951 P
100.01
5.16
8,450
98.43
4.37
7,392
73.03
1.44
EU 135
NC 31
111.13
41.28
14,061 P
103.19
6.75
10,641
101.60
5.95
9,533
88.90
1.31
1.31
1.31
1.31
EU 75
EU 75
EU 75
EU 75
NC 38
NC 38
3 1/2 OHLW
3 1/2 SL-H90
120.65
120.65
120.65
117.48
76.20
68.26
76.20
76.20
10,633
15,025
9,982
10,489
P
P
P
P
111.92
111.92
108.74
106.36
3.18
3.18
3.18
2.78
7,984
7,984
7,385
7,636
110.33
110.33
107.95
105.57
2.38
2.38
2.78
2.38
6,634
6,634
6,732
6,919
88.90
1.84
1.84
1.84
1.84
EU 75
IU 75
EU 75
EU 75
NC 38
NC 312
3 1/2 OHSW
3 1/2 H90
120.65
104.78
120.65
133.35
68.26
53.98
68.26
69.85
15,025
9,850
14,365
19,777
P
P
P
P
114.30
101.60
111.92
115.09
4.37
5.95
4.76
3.18
10,060
9,533
10,065
9,770
112.71
100.01
110.33
114.30
3.57
5.16
3.97
2.78
8,669
8,450
8,712
8,972
1.84
1.84
1.84
EU 95
EU 95
EU 95
NC 38
3 1/2 SL-H902
3 1/2 H90
127.00
117.48
133.35
65.09
68.26
69.85
16,867 P
15,402 P
19,777 P
116.68
111.13
117.48
5.56
5.16
4.37
12,201
12,090
12,206
115.09
109.54
115.89
4.76
4.37
3.57
10,767
10,576
10,574
88.90
1.84
EU 105
NC 38
127.00
61.91
18,433 P
118.27
6.35
13,663
116.68
5.56
12,201
88.90
1.84
1.84
EU 135
EU 135
NC 40
NC 38
136.53
127.00
61.91
53.98
24,836 P
22,002 P
127.00
122.24
7.14
8.33
17,383
17,445
124.62
119.86
5.95
7.14
14,892
15,155
88.90
2.14
EU 75
NC 38
127.00
65.09
16,867 P
115.09
4.76
10,767
113.51
3.97
9,362
88.90
2.14
EU 95
NC 38
127.00
61.91
18,433 P
118.27
6.35
13,663
116.68
5.56
12,201
88.90
2.14
2.14
EU 105
EU 105
NC 38
NC 40
127.00
133.35
53.98
65.09
22,002 P
23,035 P
119.86
125.41
7.14
6.35
15,154
15,715
117.48
123.03
5.95
5.16
12,928
13,270
88.90
2.14
EU 135
NC 40
139.70
57.15
27,336 P
129.38
8.33
19,941
126.21
6.75
16,545
101.60
1.64
1.64
1.64
1.64
EU 75
EU 75
EU 75
IU 75
NC 46
4 WO
4 OHLW
4 H90
152.40
146.05
133.35
139.70
82.55
87.31
88.11
71.44
27,902
23,905
18,236
29,353
132.56
132.56
127.00
123.83
2.78
2.78
3.57
2.78
10,847
10,847
10,879
10,552
130.97
130.97
125.41
123.03
1.98
1.98
2.78
2.38
8,956
8,956
9,118
9,628
P
P
P
P
2-14
Revision 03.02
2
Drill Pipe
Nom Size NomWt.
mm.
Kg/m
Type
Upset
and
Grade
Connection
5
6
New Tool Joint Data
New OD
New ID
mm
mm
Make-up
Torque6
mm
P
P
P
P
P
9
10
Premium Class
Min OD
Min Box
Make-up
Tool Joint
Shoulder
Torque for
mm.
with
Min OD
Eccentric
Tool Joint
Wear
N-m
mm
122.24
4.76
12,471
134.14
3.57
12,769
112.71
5.95
12,146
128.59
4.37
12,628
125.41
3.57
12,428
11
Min OD
Tool Joint
mm
120.65
132.56
111.13
127.00
123.83
12
13
Class 2
Min Box
Make-up
Shoulder
Torque for
with
Min OD
Eccentric
Tool Joint
Wear
N-m
mm
3.97
10,894
2.78
10,847
5.16
10,811
3.57
10,841
2.78
10,552
101.60
1.94
1.94
1.94
1.94
1.94
IU 75
EU 75
IU 75
EU 75
IU 75
NC 40
NC 46
4 SH2
4 OHSW
4 H90
133.35
152.40
117.48
139.70
139.70
71.44
82.55
71.44
0.00
76.20
19,489
27,902
12,588
22,571
29,353
101.60
1.94
1.94
1.94
IU 95
EU 95
IU 95
NC40
NC 46
4 H90
139.70
152.40
139.70
68.26
82.55
71.44
21,304 P
27,902 P
29,353 P
125.41
136.53
127.79
6.35
4.76
4.76
15,715
15,715
15,303
123.03
134.94
126.21
5.16
3.97
3.97
13,270
13,743
13,378
101.60
1.94
1.94
1.94
IU 105
EU 105
IU 105
NC40
NC 46
4 H90
133.35
152.40
139.70
61.91
82.55
71.44
24,988 P
27,902 P
29,353 P
127.00
138.11
129.38
7.14
5.56
5.56
17,383
17,720
17,261
124.62
135.73
127.79
5.95
4.37
4.76
14,892
14,725
15,303
101.60
1.94
EU 135
NC 46
152.40
76.20
32,553 P
141.29
7.14
21,833
139.70
6.35
19,760
101.60
2.17
2.17
2.17
IU 75
EU 75
IU 75
NC40
NC 46
4 H90
133.35
152.40
139.70
68.26
82.55
71.44
21,304 P
27,902 P
29,353 P
123.83
134.94
126.21
5.56
3.97
3.97
14,078
13,743
13,378
121.44
133.35
124.62
4.37
3.18
3.18
11,678
11,804
11,486
101.60
2.17
2.17
2.17
IU 95
EU 95
IU 95
NC40
NC 46
4 H90
139.70
152.40
139.70
61.91
76.20
71.44
24,988 P
27,902 P
29,353 P
127.00
138.11
129.38
7.14
5.56
5.56
17,383
17,720
17,261
124.62
135.73
127.79
5.95
4.37
4.76
14,892
14,725
15,303
101.60
2.17
2.17
EU 105
IU 105
NC 46
4 H90
152.40
139.70
76.20
71.44
32,553 P
29,353 P
138.91
130.97
5.95
6.35
18,736
19,254
137.32
128.59
5.16
5.16
16,714
16,278
101.60
2.17
2.17
IU 135
EU 135
NC 46
NC 46
152.40
152.40
66.68
73.03
37,316 B
34,738 P
143.67
143.67
8.33
8.33
25,009
25,009
140.49
140.49
6.75
6.75
20,793
20,793
114.30
2.30
2.30
2.30
2.30
2.30
IEU 75
IEU 75
IEU 75
EU 75
IEU 75
4 1/2 FH
NC 46
4 1/2 OHSW
NC 50
4 1/2 H90
152.40
158.75
149.23
168.28
152.40
76.20
82.55
95.25
95.25
82.55
28,860
28,208
22,607
31,582
32,300
P
P
P
P
P
136.53
137.32
138.11
145.26
135.73
5.16
5.16
5.16
3.97
4.76
16,769
16,714
16,405
16,029
16,893
134.14
135.73
136.53
144.46
134.14
3.97
4.37
4.37
3.57
3.97
13,930
14,725
14,349
14,899
14,718
114.30
2.30
2.30
2.30
2.30
IEU 95
IEU 95
EU 95
IEU 95
4 1/2 FH
NC 46
NC 50
4 1/2 H90
152.40
158.75
168.28
152.40
69.85
82.55
95.25
76.20
32,975
28,208
31,582
37,467
P
P
P
P
139.70
140.49
148.43
138.91
6.75
6.75
5.56
6.35
20,669
20,793
20,643
21,355
137.32
138.11
146.84
136.53
5.56
5.56
4.76
5.16
17,731
17,720
18,318
18,120
114.30
2.30
2.30
2.30
2.30
IEU 105
IEU 105
EU 105
IEU 105
4 1/2 FH
NC 46
NC 50
4 1/2 H90
152.40
158.75
168.28
152.40
69.85
76.20
95.25
76.20
32,975
32,908
31,582
37,467
P
P
P
P
141.29
142.08
150.02
139.70
7.54
7.54
6.35
6.75
22,669
22,883
23,003
22,493
138.91
139.70
147.64
138.11
6.35
6.35
5.16
5.95
19,681
19,760
19,475
20,226
114.30
2.30
2.30
IEU 135
EU 135
NC 46
NC 50
158.75
168.28
69.85
88.90
37,235 P
37,446 P
146.84
153.99
9.92
8.33
29,361
29,067
143.67
151.61
8.33
7.14
25,009
25,402
114.30
2.77
2.77
2.77
2.77
IEU 75
IEU 75
EU 75
IEU 75
4 1/2 FH
NC 46
NC 50
4 1/2 H90
152.40
158.75
168.28
152.40
76.20
76.20
92.08
76.20
28,860
32,908
34,565
37,467
P
P
P
P
138.91
139.70
147.64
137.32
6.35
6.35
5.16
5.56
19,681
19,760
19,475
19,106
136.53
137.32
146.05
135.73
5.16
5.16
4.37
4.76
16,769
16,714
17,170
16,893
114.30
2.77
2.77
2.77
2.77
IEU 95
IEU 95
EU 95
IEU 95
4 1/2 FH
NC 46
NC 50
4 1/2 H90
152.40
158.75
168.28
152.40
63.50
69.85
88.90
76.20
36,731
37,235
37,446
37,467
P
P
P
P
142.88
143.67
150.81
141.29
8.33
8.33
6.75
7.54
24,702
25,009
24,198
24,796
140.49
141.29
149.23
138.91
7.14
7.14
5.95
6.35
21,665
21,833
21,818
21,355
114.30
2.77
2.77
IEU 105
EU 105
NC 46
NC 50
158.75
168.28
63.50
88.90
41,183 P
37,446 P
145.26
153.19
9.13
7.94
27,168
27,836
142.88
150.02
7.94
6.35
23,941
23,003
114.30
2.77
IEU 135
NC 50
168.28
73.03
50,338 P
157.96
10.32
35,362
154.78
8.73
30,307
127.00
2.70
IEU 75
NC 50
168.28
95.25
31,582 P
149.23
5.95
21,818
147.64
5.16
19,475
127.00
2.70
2.70
IEU 95
IEU 95
NC 50
5 H90
168.28
165.10
88.90
82.55
37,446 P
42,989 P
153.19
148.43
7.94
7.54
27,836
27,469
150.81
146.05
6.75
6.35
24,198
23,671
Revision 03.02
2-15
2
Drill Pipe
Nom Size NomWt.
mm.
kg/m
Type
Upset
and
Grade
Connection
5
6
New Tool Joint Data
New OD
New ID
mm
mm
Make-up
Torque6
mm
9
10
Premium Class
Min OD
Min Box
Make-up
Tool Joint
Shoulder
Torque for
mm.
with
Min OD
Eccentric
Tool Joint
Wear
N-m
mm
154.78
8.73
30,307
150.02
8.33
30,048
11
Min OD
Tool Joint
mm
152.40
147.64
12
13
Class 2
Min Box
Make-up
Shoulder
Torque for
with
Min OD
Eccentric
Tool Joint
Wear
N-m
mm
7.54
26,614
7.14
26,194
127.00
2.70
2.70
IEU 105
IEU 105
NC 50
5 H90
168.28
165.10
82.55
76.20
42,908 P
48,459 P
127.00
2.70
2.70
IEU 135
IEU 135
NC 50
5 1/2 FH
168.28
184.15
69.85
88.90
52,615 P
60,147 P
160.34
171.45
11.51
9.53
39,251
39,743
157.16
168.28
9.92
7.94
34,084
33,762
127.00
3.54
3.54
IEU 75
IEU 75
NC 50
5 1/2 FH
168.28
177.80
88.90
88.90
37,446 P
52,197 B
153.19
165.10
7.94
6.35
27,836
27,944
150.81
162.72
6.75
5.16
24,198
23,687
127.00
3.54
3.54
IEU 95
IEU 95
NC 50
5 1/2 FH
168.28
177.80
76.20
88.90
47,962 P
52,197 B
157.96
169.07
10.32
8.33
35,362
35,243
154.78
166.69
8.73
7.14
30,307
30,833
127.00
3.54
3.54
IEU 105
IEU 105
NC 50
5 1/2 FH
168.28
184.15
69.85
88.90
52,615 P
60,147 P
159.54
170.66
11.11
9.13
37,945
38,233
156.37
168.28
9.53
7.94
32,816
33,762
127.00
3.54
IEU 135
5 1/2 FH
184.15
82.55
65,319 B
176.21
11.91
49,022
173.04
10.32
42,794
139.70
3.03
IEU 75
5 1/2 FH
177.80
101.60
46,413 P
164.31
5.95
26,515
162.72
5.16
23,687
139.70
3.03
3.03
IEU 95
IEU 95
5 1/2 FH
5 1/2 H90
177.80
177.80
95.25
88.90
52,197 B
49,033 P
168.28
157.16
7.94
8.33
33,762
33,765
165.89
154.78
6.75
7.14
29,383
29,526
139.70
3.03
IEU 105
5 1/2 FH
184.15
88.90
60,147 P
170.66
9.13
38,233
167.48
7.54
32,293
139.70
3.03
IEU 135
5 1/2 FH
190.50
76.20
73,717 P
176.21
11.91
49,022
162.72
10.32
42,794
139.70
3.42
IEU 75
5 1/2 FH
177.80
101.60
46,413 P
166.69
7.14
30,833
164.31
5.95
26,515
139.70
3.42
IEU 95
5 1/2 FH
184.15
88.90
60,147 P
170.66
9.13
38,233
167.48
7.54
32,293
139.70
3.42
IEU 105
5 1/2 FH
184.15
88.90
60,147 P
172.24
9.92
41,263
169.86
8.73
36,732
139.70
3.42
IEU 135
5 1/2 FH
190.50
76.20
72,334 P
178.59
13.10
53,800
174.63
11.11
45,888
168.28
3.49
0.00
0.00
0.00
IEU 75
IEU 95
IEU 105
IEU 135
6 5/8 FH
6 5/8 FH
6 5/8 FH
6 5/8 FH
203.20
203.20
209.55
215.90
127.00
127.00
120.65
107.95
61,123
61,123
71,559
90,635
P
P
P
P
188.91
193.68
195.26
200.82
6.35
8.73
9.53
12.30
37,078
48,597
52,530
66,666
187.33
190.50
192.88
197.64
5.56
7.14
8.33
10.72
33,330
40,870
46,649
58,517
168.28
3.83
0.00
0.00
0.00
IEU 75
IEU 95
IEU 105
IEU 135
6 5/8 FH
6 5/8 FH
6 5/8 FH
6 5/8 FH
203.20
209.55
209.55
215.90
127.00
120.65
120.65
107.95
61,123
71,559
71,559
90,635
P
P
P
P
190.50
195.26
196.85
203.20
7.14
9.53
10.32
13.49
40,870
52,530
56,509
72,903
188.12
192.09
194.47
188.52
5.95
7.94
9.13
11.51
35,199
44,711
50,557
62,568
Notes:
1
The use of outside diameters (OD) smaller than those listed in the table may be acceptable due to special service requirements.
Tool Joint with dimensions shown has lower torsional yield ratio than the 0.80 which is generally used.
In calculation of torsional strengths to tool joints, both new and worn, the bevels of the tool joint shoulders are disregarded. The
thickness measurement should be made in the plane of the face from the ID of the counter bore to the outside diameter of the box,
disregarding the bevels.
5
Any tool joint with an outside diameter less than API bevel diameter should be provided with a minimum 1/32 depth X 45 bevel on the
outside and inside diameter of the box shoulder and outside diameter of the pin shoulder.
6
*Tool joint diameters specified are required to retain torsional strength in the tool joint comparable to the torsional strength of the attached
drill pipe. These should be adequate for all service. Tool joints with torsional strengths considerably below that of the drill pipe may be
adequate for much drilling service.
This information has been duplicated in its entirety from API RP 7G Table 10 and is current as of the
publication of this Manual. However, it is likely that the data will be updated several times during the life of a
Top Drive unit. Consult API Recommended Practices or IADC Drilling Manual to be certain that this
information is current.
2-16
Revision 03.02
2
Drill Pipe
NomWt.
Lb/ft
Nom
Size,
in.
Type
Upset
and
Grade
Connection
5
6
New Tool Joint Data
New OD
New ID
in
in
9
10
Premium Class
Min OD
Min Box
Make-up
Tool Joint
Shoulder
Torque for
in.
with
Min OD
Eccentric
Tool Joint
Wear
ft-lb
in
Make-up
Torque6
in
11
Min OD
Tool Joint
in
12
Class 2
Min Box
Shoulder
with
Eccentric
Wear
in
13
Make-up
Torque for
Min OD
Tool Joint
ft-lb
2 3/8
4.85
4.85
4.85
4.85
EU 75
EU 75
EU 75
EU 75
NC 26
W.O.
2 3/8 ONLW
2 3/8 SL-H90
3
3
3
3
3/8
3/8
1/8
1/4
1 3/4
2
2
2
4,125
2,586
2,713
3,074
B
P
P
P
3 1/8
3 1/16
3
2 31/32
3/64
1/16
1/16
1/16
1,945
1,994
1,830
1,996
3 3/32
3 1/32
2 31/32
2 15/16
1/32
3/64
3/64
3/64
1,689
1,746
1,589
1,726
2 3/8
6.65
6.65
6.65
6.65
IU 75
EU 75
EU 75
EU 75
2 3/8 PAC2
NC 26
2 3/8 SL-H90
2 3/8 OHSW
2
3
3
3
7/8
3/8
1/4
1/4
1 3/8
1 3/4
2
1 3/4
2,813
4,125
3,074
3,891
P
B
P
B
2 25/32
3 3/16
3 1/32
3 1/16
9/64
5/64
3/32
3/32
2,455
2,467
2,549
2,324
2 23/32
3 5/32
2 31/32
3 1/32
7/64
1/16
1/16
5/64
2,055
2,204
1,996
2,075
2 3/8
6.65
EU 95
NC 26
3 3/8
1 3/4
4,125 B
3 1/4
7/64
3,005
3 7/32
3/32
2,734
2 3/8
6.65
EU 105
NC 262
3 3/8
1 3/4
4,125 B
3 9/32
1/8
3,279
3 1/4
7/64
3,005
2 7/8
6.85
6.85
6.85
6.85
EU 75
EU 75
EU 75
EU 75
NC 31
2 7/8 WO
2 7/8 OHLW 2
2 7/8 SL-H90
4
4
3
3
1/8
1/8
3/4
7/8
2 1/8
2 7/16
2 7/16
2 7/16
7,122
4,318
3,351
4,575
P
P
P
P
3 11/16
3 5/8
3 1/2
3 1/2
5/64
5/64
7/64
3/32
3,154
3,216
3,297
3,397
10 1/32
3 19/32
3 7/16
3 7/16
1/16
1/16
5/64
1/16
2,804
2,876
2,666
2,666
2 7/8
10.40
10.40
10.40
10.40
10.40
10.40
EU 75
IU 75
IU 75
EU 75
EU 75
IU 75
NC 31
2 7/8 XH
NC 262
2 7/8 OHSW 2
2 7/8 SL-H90
2 7/8 PAC2
4
4
3
3
3
3
1/8
1/4
3/8
7/8
7/8
1/8
2 1/8
1 7/8
1 3/4
2 5/32
2 5/32
1 1/2
7,122
7,969
4,125
5,270
6,773
3,439
P
P
B
P
P
P
3 13/16
3 23/32
3 3/8
3 19/32
3 19/32
3 1/8
9/64
9/64
11/64
5/32
9/64
15/64
4,597
4,357
4,125
4,273
4,529
3,439
3 3/4
3 21/32
3 11/32
3 9/16
3 17/32
3 1/8
7/64
7/64
5/32
7/64
7/64
15/64
3,867
3,664
3,839
3,941
3,770
3,439
2 7/8
10.40
10.40
EU 95
EU 95
NC 31
2 7/8 SL-H902
4 1/8
3 7/8
2
2 5/32
7,918 P
6,773 P
3 29/32
3 11/16
3/16
3/16
5,726
5,702
3 27/32
3 5/8
5/32
5/32
4,969
4,915
2 7/8
10.40
EU 105
NC 31
4 1/8
7,918 P
3 15/16
13/64
6,110
3 7/8
11/64
5,345
2 7/8
10.40
EU 135
NC 31
4 3/8
1 5/8
10,167 P
4 1/16
17/64
7,694
15/64
6,893
3 1/2
9.50
9.50
9.50
9.50
EU 75
EU 75
EU 75
EU 75
NC 38
NC 38
3 1/2 OHLW
3 1/2 SL-H90
4
4
4
4
3/4
3/4
3/4
5/8
3
2 11/16
3
3
7,688
10,864
7,218
7,584
P
P
P
P
4 13/32
4 13/32
4 9/32
4 3/16
1/8
1/8
1/8
7/64
5,773
5,773
5,340
5,521
4 11/32
4 11/32
4 1/4
4 5/32
3/32
3/32
7/64
3/32
4,797
4,797
4,868
5,003
3 1/2
13.30
13.30
13.30
13.30
EU 75
IU 75
EU 75
EU 75
NC 38
NC 312
3 1/2 OHSW
3 1/2 H90
4
4
4
5
3/4
1/8
3/4
1/4
2 11/16
2 1/8
2 11/16
2 3/4
10,864
7,122
10,387
14,300
P
P
P
P
4 1/2
4
4 13/32
4 17/32
11/64
15/64
3/16
1/8
7,274
6,893
7,278
7,064
4 7/16
3 15/16
4 11/32
4 1/2
9/64
13/64
5/32
7/64
6,268
6,110
6,299
6,487
13.30
13.30
13.30
EU 95
EU 95
EU 95
NC 38
3 1/2 SL-H902
3 1/2 H90
5
4 5/8
5 1/4
2 9/16
2 11/16
2 3/4
12,196 P
11,137 P
14,300 P
4 19/32
4 3/8
4 5/8
7/32
13/64
11/64
8,822
8,742
8,826
4 17/32
4 5/16
4 9/16
3/16
11/64
9/64
7,785
7,647
7,646
3 1/2
13.30
EU 105
NC 38
2 7/16
13,328 P
4 21/32
1/4
9,879
4 19/32
7/32
8,822
3 1/2
13.30
13.30
EU 135
EU 135
NC 40
NC 38
5 3/8
5
2 7/16
2 1/8
17,958 P
15,909 P
5
4 13/16
9/32
21/64
12,569
12,614
4 29/32
4 23/32
15/64
9/32
10,768
10,958
3 1/2
15.50
EU 75
NC 38
2 9/16
12,196 P
4 17/32
3/16
7,785
4 15/32
5/32
6,769
3 1/2
15.50
EU 95
NC 38
2 7/16
13,328 P
4 21/32
1/4
9,879
4 19/32
7/32
8,822
3 1/2
15.50
15.50
EU 105
EU 105
NC 38
NC 40
5
5 1/4
2 1/8
2 9/16
15,909 P
16,656 P
4 23/32
4 15/16
9/32
1/4
10,957
11,363
4 5/8
4 27/32
15/64
13/64
9,348
9,595
3 1/2
15.50
EU 135
NC 40
5 1/2
2 1/4
19,766 P
5 3/32
21/64
14,419
4 31/32
17/64
11,963
11.85
11.85
11.85
11.85
EU 75
EU 75
EU 75
IU 75
NC 46
4 WO
4 OHLW
4 H90
6
5 3/4
5 1/4
5 1/2
3 1/4
3 7/16
3 15/32
2 13/16
20,175
17,285
13,186
21,224
5 7/32
5 7/32
5
4 7/8
7/64
7/64
9/64
7/64
7,843
7,843
7,866
7,630
5 5/32
5 5/32
4 15/16
4 27/32
5/64
5/64
7/64
3/32
6,476
6,476
6,593
6,962
P
P
P
P
Revision 03.02
2-17
2
Drill Pipe
Nom Size NomWt.
in.
Lb/ft
Type
Upset
and
Grade
Connection
14.00
14.00
14.00
14.00
14.00
IU 75
EU 75
IU 75
EU 75
IU 75
NC 40
NC 46
4 SH2
4 OHSW
4 H90
5 1/4
6
4 5/8
5 1/2
5 1/2
2 13/16
3 1/4
2 13/16
14.00
14.00
14.00
IU 95
EU 95
IU 95
NC40
NC 46
4 H90
5 1/2
6
5 1/2
2 11/16
3 1/4
2 13/16
15,404 P
20,175 P
21,224 P
4 15/16
5 3/8
5 1/32
1/4
3/16
3/16
11,363
11,363
11,065
4 27/32
5 5/16
4 31/32
13/64
5/32
5/32
9,595
9,937
9,673
14.00
14.00
14.00
IU 105
EU 105
IU 105
NC40
NC 46
4 H90
5 1/4
6
5 1/2
2 7/16
3 1/4
2 13/16
18,068 P
20,175 P
21,224 P
5
5 7/16
5 3/32
9/32
7/32
7/32
12,569
12,813
12,481
4 29/32
5 11/32
5 1/32
15/64
11/64
3/16
10,768
10,647
11,065
14.00
EU 135
NC 46
23,538 P
5 9/16
9/32
15,787
5 1/2
1/4
14,288
15.70
15.70
15.70
IU 75
EU 75
IU 75
NC40
NC 46
4 H90
5 1/4
6
5 1/2
2 11/16
3 1/4
2 13/16
15,404 P
20,175 P
21,224 P
4 7/8
5 5/16
4 31/32
7/32
5/32
5/32
10,179
9,937
9,673
4 25/32
5 1/4
4 29/32
11/64
1/8
1/8
8,444
8,535
8,305
15.70
15.70
15.70
IU 95
EU 95
IU 95
NC40
NC 46
4 H90
5 1/2
6
5 1/2
2 7/16
3
2 13/16
18,068 P
20,175 P
21,224 P
5
5 7/16
5 3/32
9/32
7/32
7/32
12,569
12,813
12,481
4 29/32
5 11/32
5 1/32
15/64
11/64
3/16
10,768
10,647
11,065
15.70
15.70
EU 105
IU 105
NC 46
4 H90
6
5 1/2
3
2 13/16
23,538 P
21,224 P
5 15/32
5 5/32
15/64
1/4
13,547
13,922
5 13/32
5 1/16
13/64
13/64
12,085
11,770
15.70
15.70
IU 135
EU 135
NC 46
NC 46
6
6
2 5/8
2 7/8
26,982 B
25,118 P
5 21/32
5 21/32
21/64
21/64
18,083
18,083
5 17/32
5 17/32
17/64
17/64
15,035
15,035
4 1/2
16.60
16.60
16.60
16.60
16.60
IEU 75
IEU 75
IEU 75
EU 75
IEU 75
4 1/2 FH
NC 46
4 1/2 OHSW
NC 50
4 1/2 H90
6
6 1/4
5 7/8
6 5/8
6
3
3
3
3
3
1/4
3/4
3/4
1/4
20,868
20,396
16,346
22,836
23,355
P
P
P
P
P
5 3/8
5 13/32
5 7/16
5 23/32
5 11/32
13/64
13/64
13/64
5/32
3/16
12,125
12,085
11,862
11,590
12,215
5 9/32
5 11/32
5 3/8
5 11/16
5 9/32
5/32
11/64
11/64
9/64
5/32
10,072
10,647
10,375
10,773
10,642
4 1/2
16.60
16.60
16.60
16.60
IEU 95
IEU 95
EU 95
IEU 95
4 1/2 FH
NC 46
NC 50
4 1/2 H90
6
6 1/4
6 5/8
6
2 3/4
3 1/4
3 3/4
3
23,843
20,396
22,836
27,091
P
P
P
P
5 1/2
5 17/32
5 27/32
5 15/32
17/64
17/64
7/32
1/4
14,945
15,035
14,926
15,441
5 13/32
5 7/16
5 25/32
5 3/8
7/32
7/32
3/16
13/64
12,821
12,813
13,245
13,102
4 1/2
16.60
16.60
16.60
16.60
IEU 105
IEU 105
EU 105
IEU 105
4 1/2 FH
NC 46
NC 50
4 1/2 H90
6
6 1/4
6 5/8
6
2 3/4
3
3 3/4
3
23,843
23,795
22,836
27,091
P
P
P
P
5 9/16
5 19/32
5 29/32
5 1/2
19/64
19/64
1/4
17/64
16,391
16,546
16,633
16,264
5 15/32
5 1/2
5 13/16
5 7/16
1/4
1/4
13/64
15/64
14,231
14,288
14,082
14,625
4 1/2
16.60
16.60
IEU 135
EU 135
NC 46
NC 50
6 1/4
6 5/8
2 3/4
3 1/2
26,923 P
27,076 P
5 25/32
6 1/16
25/64
21/64
21,230
21,017
5 21/32
5 31/32
21/64
9/32
18,083
18,367
4 1/2
20.00
20.00
20.00
20.00
IEU 75
IEU 75
EU 75
IEU 75
4 1/2 FH
NC 46
NC 50
4 1/2 H90
6
6 1/4
6 5/8
6
3
3
3 5/8
3
20,868
23,795
24,993
27,091
P
P
P
P
5 15/32
5 1/2
5 13/16
5 13/32
1/4
1/4
13/64
7/32
14,231
14,288
14,082
13,815
5 3/8
5 13/32
5 3/4
5 11/32
13/64
13/64
11/64
3/16
12,125
12,085
12,415
12,215
4 1/2
20.00
20.00
20.00
20.00
IEU 95
IEU 95
EU 95
IEU 95
4 1/2 FH
NC 46
NC 50
4 1/2 H90
6
6 1/4
6 5/8
6
2 1/2
2 3/4
3 1/2
3
26,559
26,923
27,076
27,091
P
P
P
P
5 5/8
5 21/32
5 15/16
5 9/16
21/64
21/64
17/64
19/64
17,861
18,083
17,497
17,929
5 17/32
5 9/16
5 7/8
5 15/32
9/32
9/32
15/64
1/4
15,665
15,787
15,776
15,441
4 1/2
20.00
20.00
IEU 105
EU 105
NC 46
NC 50
6 1/4
6 5/8
2 1/2
3 1/2
29,778 P
27,076 P
5 23/32
6 1/32
23/64
5/16
19,644
20,127
5 5/8
5 29/32
5/16
1/4
17,311
16,633
4 1/2
20.00
IEU 135
NC 50
6 5/8
2 7/8
36,398 P
6 7/32
13/32
25,569
6 3/32
11/32
21,914
19.50
IEU 75
NC 50
6 5/8
3 3/4
22,836 P
5 7/8
15/64
15,776
5 13/16
13/64
14,082
19.50
19.50
IEU 95
IEU 95
NC 50
5 H90
6 5/8
6 1/2
3 1/2
3 1/4
27,076 P
31,084 P
6 1/32
5 27/32
5/16
19/64
20,127
19,862
5 15/16
5 3/4
17/64
1/4
17,497
17,116
5
6
New Tool Joint Data
New OD
New ID
in
in
Make-up
Torque6
in
14,092
20,175
9,102
16,320
21,224
P
P
P
P
P
9
10
Premium Class
Min OD
Min Box
Make-up
Tool Joint
Shoulder
Torque for
in.
with
Min OD
Eccentric
Tool Joint
Wear
ft-lb
in
4 13/16
3/16
9,017
5 9/32
9/64
9,233
4 7/16
15/64
8,782
5 1/16
11/64
9,131
4 15/16
9/64
8,986
11
Min OD
Tool Joint
in
4 3/4
5 7/32
4 3/8
5
4 7/8
12
13
Class 2
Min Box
Make-up
Shoulder
Torque for
with
Min OD
Eccentric
Tool Joint
Wear
ft-lb
in
5/32
7,877
7/64
7,843
13/64
7,817
9/64
7,839
7/64
7,630
2-18
Revision 03.02
2
Drill Pipe
Nom Size NomWt.
in.
Lb/ft
Type
Upset
and
Grade
Connection
5
6
New Tool Joint Data
New OD
New ID
in
in
Make-up
Torque6
in
9
10
Premium Class
Min OD
Min Box
Make-up
Tool Joint
Shoulder
Torque for
in.
with
Min OD
Eccentric
Tool Joint
Wear
ft-lb
in
6 3/32
11/32
21 914
5 29/32
21/64
21 727
11
Min OD
Tool Joint
in
6
5 13/16
12
13
Class 2
Min Box
Make-up
Shoulder
Torque for
with
Min OD
Eccentric
Tool Joint
Wear
ft-lb
in
19/64
19 244
9/32
18 940
19.50
19.50
IEU 105
IEU 105
NC 50
5 H90
6 5/8
6 1/2
3 1/4
3
31 025 P
35 039 P
19.50
19.50
IEU 135
IEU 135
NC 50
5 1/2 FH
6 5/8
7 1/4
2 3/4
3 1/2
38 044 P
43 490 P
6 5/16
6 3/4
29/64
3/8
28 381
28 737
6 3/16
6 5/8
25/64
5/16
24 645
24 412
25.60
25.60
IEU 75
IEU 75
NC 50
5 1/2 FH
6 5/8
7
3 1/2
3 1/2
27 076 P
37 742 B
6 1/32
6 1/2
5/16
1/4
20 127
20 205
5 15/16
6 13/32
17/64
13/64
17 497
17 127
25.60
25.60
IEU 95
IEU 95
NC 50
5 1/2 FH
6 5/8
7
3
3 1/2
34 680 P
37 742 B
6 7/32
6 21/32
13/32
21/64
25 569
25 483
6 3/32
6 9/16
11/32
9/32
21 914
22 294
25.60
25.60
IEU 105
IEU 105
NC 50
5 1/2 FH
6 5/8
7 1/4
2 3/4
3 1/2
38 044 P
43 490 P
6 9/32
6 23/32
7/16
23/64
27 437
27 645
6 5/32
6 5/8
3/8
5/16
23 728
24 412
25.60
IEU 135
5 1/2 FH
7 1/4
3 1/4
47 230 B
6 15/16
15/32
35 446
6 13/16
13/32
30 943
5 1/2
21.90
IEU 75
5 1/2 FH
33 560 P
6 15/32
15/64
19 172
6 13/32
13/64
17 127
5 1/2
21.90
21.90
IEU 95
IEU 95
5 1/2 FH
5 1/2 H90
7
7
3 3/4
3 1/2
37 742 B
35 454 P
6 5/8
6 3/16
5/16
21/64
24 412
24 414
6 17/32
6 3/32
17/64
9/32
21 246
21 349
5 1/2
21.90
IEU 105
5 1/2 FH
7 1/4
3 1/2
43 490 P
6 23/32
23/64
27 645
6 19/32
19/64
23 350
5 1/2
21.90
IEU 135
5 1/2 FH
7 1/2
53 302 P
6 15/16
15/32
35 446
6 13/32
13/32
30 943
5 1/2
24.70
IEU 75
5 1/2 FH
33 560 P
6 9/16
9/32
22 294
6 15/32
15/64
19 172
5 1/2
24.70
IEU 95
5 1/2 FH
7 1/4
3 1/2
43 490 P
6 23/32
23/64
27 645
6 19/32
19/64
23 350
5 1/2
24.70
IEU 105
5 1/2 FH
7 1/4
3 1/2
43 490 P
6 25/32
25/64
29 836
6 11/16
11/32
26 560
5 1/2
24.70
IEU 135
5 1/2 FH
7 1/2
52 302 P
7 1/32
33/64
38 901
6 7/8
7/16
33 180
6 5/8
25.20
IEU 75
IEU 95
IEU 105
IEU 135
6 5/8 FH
6 5/8 FH
6 5/8 FH
6 5/8 FH
8
8
8 1/4
8 1/2
5
5
4 3/4
4 1/4
44 196
44 196
51 742
65 535
P
P
P
P
7 7/16
7 5/8
7 11/16
7 29/32
1/4
11/32
3/8
31/64
26 810
35 139
37 983
48 204
7 3/8
7 1/2
7 19/32
7 25/32
7/32
9/32
21/64
27/64
24 100
29 552
33 730
42 312
6 5/8
27.70
IEU 75
IEU 95
IEU 105
IEU 135
6 5/8 FH
6 5/8 FH
6 5/8 FH
6 5/8 FH
8
8 1/4
8 1/4
8 1/2
5
4 3/4
4 3/4
4 1/4
44 196
51 742
51 742
65 535
P
P
P
P
7 1/2
7 11/16
7 3/4
8
9/32
3/8
13/32
17/32
29 552
37 983
40 860
52 714
7 13/32
7 9/16
7 21/32
7 27/64
15/64
5/16
23/64
29/64
25 451
32 329
36 556
45 241
Notes:
1
The use of outside diameters (OD) smaller than those listed in the table may be acceptable due to special service requirements.
Tool Joint with dimensions shown has lower torsional yield ratio than the 0.80 which is generally used.
In calculation of torsional strengths to tool joints, both new and worn, the bevels of the tool joint shoulders are disregarded. The
thickness measurement should be made in the plane of the face from the ID of the counter bore to the outside diameter of the box,
disregarding the bevels.
5
Any tool joint with an outside diameter less than API bevel diameter should be provided with a minimum 1/32 depth X 45 bevel on the
outside and inside diameter of the box shoulder and outside diameter of the pin shoulder.
6
*Tool joint diameters specified are required to retain torsional strength in the tool joint comparable to the torsional strength of the attached
drill pipe. These should be adequate for all service. Tool joints with torsional strengths considerably below that of the drill pipe may be
adequate for much drilling service.
This information has been duplicated in its entirety from API RP 7G Table 10 and is current as of the
publication of this Manual. However, it is likely that the data will be updated several times during the life of a
Top Drive unit. Consult API Recommended Practices or IADC Drilling Manual to be certain that this
information is current.
Revision 03.02
2-19
2-20
Revision 03.02