Escolar Documentos
Profissional Documentos
Cultura Documentos
MH-C9000
WizardOne
Charger-Analyzer
$59.95
Features 4
independent
slots, large
backlit LCD dis-
play and endless
programming possibilities.
There are 5 modes of operation: Charge; Refresh
& Analyze; Break-in; Discharge and Cycle. Use the
charger for battery matching. Battery matching
refers to grouping batteries with similar “actual”
capacity for best performance when used together.
Use the Battery Forming to force a full charge into
a new or fully discharged battery by charging at
a very slow rate. It comes with alight worldwide
power supply and is 12VDC compatible.
MH-C801D
8-Cell One Hour Charger
$84.95
* Lithium
• Eight independent charging circuits. Charge
1 to 8 batteries. Mix rechargeable AA / AAA NiMH Rechargeable Battery Cells
batteries.
• LCD display shows charging and conditioning
status in English.
• Precision microprocessor controlled 0.001 V
voltage detection. No under-charge. No over-
charge.
• Selectable soft and rapid charge modes soft
charge option for highest battery life. Rapid
charge option for shortest charge time.
• Built-in deep battery conditioning system.
All
SunWize
Products drop
Noise
OEM Solar Module Kits Reducing
shipped to
your location Speaker
CLRspkr
The Solar Module Kits include a solar module, the SunWise SW-
1L6 prewired voltage regulator with output cable and a Þxed tilt, 45" This small, ampliÞed loudspeaker is ideal for
side-of-pole mount The waterproof controller has a multi-function mobile operation. Plugs into radio’s speaker
or headphone output. Small size 5.25 x 7 x 2.5
LED indicator and fuse protection. 20 year warranty. OEM 5 and
inches. Constructed of a heavy duty molded case
10 kits include 5' cable and OEM 20 and 40 10' cable.
with adjustable mounting bracket. Includes a 6
foot audio cable and a 6 foot power cable with
Kit Rated Rated Open Rated Size Weight HRO PowerPole connectors for an optional VDC 13.6
Model Voltage Power Circuit Current (inches) (lbs) Price power source. HRO Price $199.95
Voltage
OEM5 16.4 5W 20.5 .31 A 11.82 x 9.84 7 $169.95
OEM10 16.4 10 W 21 .61 A 15.15 x 14.76 8.5 $229.95
OEM20 16.5 20 W 21 1.22 A 20.86 x 16.93 12.5 $299.95
OEM40 16.7 40 W 21 2.40 A 38.38 x 17.13 18.5 $399.95
Batteries
The valve-regulated, gelled-electrolyte Deka Solar batter- Noise Reducing Processor
ies offer reliable, maintenance free power for renewable CLRdsp
energy applications. All models 12 VDC. Sealed construc-
Outboard processor is ideal for hamshack
tion eliminates periodic watering, corrosive acid fumes and operation. Processor contains a 2 watt audio
spills. The electrolyte will not stratify so no equalization is power ampliÞer. Metal case just 5.5 x 4.5 x
required. These batteries are rated non-spillable by ICAO, 1.25 inches. Connects between your radio’s
IATA and DOT. Safe to ship by truck or air. speaker or headphone output and your station
loudspeaker. Uses 1/8 inch audio plugs. Includes
Capacity Capacity Size Weight HRO two 6 foot audio cables and a 6 foot power cable
@ 100 Hr. @ 20 Hr. (inches) (pounds) Price with PowerPole connectors for an optional 13.6
Model Rate Rate VDC power source. HRO Price $199.95
8GUI 36 Ah 31 Ah 7.75 x 5.13 x 7.25 24 $119.95
8G22NF 56.5 Ah 48 Ah 9.4 x 5.5 x 9.25 39 $139.95 Wall Mount Power Supply for CLRdsp, 117Vac
3G27 98 Ah 86 Ah 12.75 x 6.75 x 9.87 64 $219.95 to 12 VDC at 1 amp. HRO Price $14.95
*Owner modiÞable for 10 m #Add 35 pounds. Transformer shipped in separate package. **SGC PS-50 recommended †VP-1000 power supply inc.
HL-350VDX HC-200AT
$CALL – HRO Price $CALL – HRO Price
HL-1.5KFX The HC-200AT works with a variety of antennas, tun-
The HL-350VDX is a 144 MHz 330 W amp $3099.95 – HRO Price
for RF drive of 10W, 25W and 50W. Multi- ing with lightning speed. The large analog meter au-
meter for power out, auto SWR, DC line volt- 1.8 MHz - 29 MHz amateur bands includ- tomatically displays SWR status as well as forward
age. GaAs low noise RX pre-amp included.. ing WARC bands plus 50 MHz, FCC power.
It covers 144-148MHz on both FM and SSB. certiÞed, built-in power supply 110 or 220 • Frequency Range: 1.8 - 54 MHz.
It requires 13.8 VDC at 48 A maximum (neg- VAC (240 V preferred). 10.7 x 5.6 x 14.4 • Impedance Range: 5 - 500 Ω (3.5-54 MHz) / 15 -
ative ground). The connectors are SO-239. inches, approx. 45 pounds. Fully solid 500 Ω (1.8 MHz).
There is protection for DC reverse polarity state, auto-band switching with most Icom, • Handling Power: 200 W maximum PEP / CW.
and High SWR. It features a terminal for the Kenwood, Yaesu radios (cables included). • Input Impedance: 50 Ω (SO-239).
optional HRC-60 remote controller. The am Manual band switching as well. Two an- • Output Connectors: Two SO-239’s and one wire an-
is 9.6 x 3.9 x 14 inches (WxHxD) and weighs tenna ports selectable from front panel. tenna terminal.
12.5 pounds. Built-in RF power meter. HF 1 KW PEP • Tuning Time: 1.5 sec (typ), 4 sec max, 0.2 sec for
SSB (typical). 6m 650 W PEP output. RF memory tuning mode.
drive 85 W typical (100 W max). Great for • DC Power: 12-14 VDC, 0.8A max, 0.1A after tuning
DX-peditions or home station. External fan is Þnished.
option for high duty cycle RTTY. Modes: • Dimensions: 7.7 x 2.4 x 9.5 inches (WxHxD).
SSB / CW / RTTY. • Weight: approx. 2.3 pounds.
• Optional Parts: Radio Interface Cable (Icom) HTC-
100AT / Icom5 (17ft).
HC-1.5KAT
HL-2.5KFX
$5599.95 – HRO Price $CALL
HRO Price
The HL-2.5KFX is a compact, light weight
desk-top HF linear power ampliÞer with the
maximum input power of 3 kW. It boasts of
being smallest and lightest in the industry H C - 1 . 5 K AT
using our solid state broad band power amp is a high power HF
technology. HL-1.2KFX auto antenna tuner designed
$1999.99 – HRO Price to work with Tokyo Hy-Power HL-1.5KFX and HL-
Typical output power is 1.8 kW PEP / SSB The HL-1.2KFX is a solid-state broad- 2.5KFX linear ampliÞers. When combined with these
(1.5 kW CW min.) on entire HF bands (slight- band ampliÞer that is the lightest and THP ampliÞers, the band change is made automati-
ly less on 10m) with the drive power of 80-95 most compact semi 1kW HF ampliÞer in cally through the band data signal from the radio and
W. The built-in band decoder will let you for- the industry.Compact, rugged HF linear the ampliÞer. (Version 1.2 Þrmware or higher required
get about the band setting when the ampli- amp operates on all amateur bands from on JL-1.5KFX).
Þer is hooked to your modern radio through 1.8 to 28 MHz, including WARC bands.
such band data cables as Icom CI-V, DC Class AB parallel push-pull for 750 W It handles maximum power of 1.5 kW pep / cw when
voltage (Icom, Yaesu), and RS-232C (Ken- output on SSB, 650 W on CW, or 400 W the intrinsic antenna SWR is no more than 2 to 1.
wood). There is a band data output socket to RTTY. Input 75-90W. QSK compatible Maximum impedance matching range is SWR 4 to 1
command the external auto antenna tuner, for fast CW break-in. Forced air cooling. on HF and 3 to 1 on 6 m. Input impedance is 50 Ω.
HC-1.5KAT. Runs on 100-120 or 200-240 VAC. The
broadband characteristics require no Two high grade 3.5 kV rating 200 pF air variable ca-
Two pieces of extremely rugged high volt- further tuning once the operating band pacitors form a “T“ match circuit being driven by high
age RF power FET’s of the latest design are is selected. speed stepping motors. Our own tuning algorithm to-
used in push-pull form. 1,500 W of power gether with an advanced 16 bit micro-processor en-
dissipation and 500 V of breakdown voltage. ables an extremely fast tuning speed of one second
Several protection circuits are built in such typical and four seconds maximum. It features three
as over drive, high antenna SWR, thermal SO-239 output connectors.
shutdown. Two large analog meters monitor
Call Toll Free
Pf and Vd / Id / Pr. On the LCD panel meter for Quotes The display is an LCD module with 16 characters in
are shown freq. band, heat sink temperature, 2 rows. The unit is 8 x 5.6 x 12 inches (WxHxD) and
mode of auto band setting, etc. weighs 11 pounds.
Whip Antennas
500 W SG-303 – $CALL
100 W SG-307 – $CALL
Hellically wound whip antennas can be used with SGC
and other couplers. SG-307 (55-28 & 55-69), up to
100 W, 1.8-60 MHz, 7 feet. SG-303 (55-27 & 55-67),
up to 500 W, 1.8-30 MHz, 9 feet (2 sections). Both
antennas can be supplied with or without a stainless
* Operates from 4 AA batteries - factory installed steel swivel ratchet mount (55-75).