Escolar Documentos
Profissional Documentos
Cultura Documentos
21
UDC
JE2
035A
ICF tech
R
Quick
cost-effective
high performance
sustainable
What
we do...
UK designed system
ICF Tech has designed and developed the only Insulating
Concrete Form (ICF) system specifically for the UK market.
Peace of mind
We train our own installers to provide a risk free structural
walling solution to our clients. Our in-house contract
management, structural engineering and estimating
capability ensures that we can work with you on every
aspect of your build, literally from the ground works up.
Risk-free structural
walling solutions
3
How you
benefit
0.19 W/m2K to 0.11 W/m2K
By using the ICF Tech system you automatically exceed Part
L of the Building Regs. with a U value of just 0.19 W/m2K and
air leakage as low as 0.74 m3/m2/h* using our system will help
you achieve code level 6 of the Code for Sustainable Homes.
Airborne sound performance is also considerably improved.
Quick installation
Up to 4m2/man/hour can be achieved with our trained 3 man
teams, so your developments are completed quicker.
Less to go wrong
Timber frame and cavity construction have many detailed
interfaces that often cause problems. The ICF Tech system
has been designed to accommodate lintols, wall ties, damp
proof courses and other components, to provide a simple
and complete construction solution.
SAP ratings
With all our construction interfaces achieving ACD levels and
above you are able to achieve design Y values for detached
and terrace housing as low as 0.03.
Freedom to design
Sustainability
built in
Code for Sustainable Homes
Achieving a rating against the Code is now
mandatory for new homes.
Code Level 3 to 6
Our system can be used to achieve levels 3 to 6
of the Code for Sustainable Homes without a
dramatic increase in size or cost for the Structural
Walls. No off-site manufacture lead times and
no excessive wall thicknesses, just a modern,
sustainable method of construction.
Thermal performance is only part of the equation in gaining code level 3 and
higher. Air permeability (the amount of warm air escaping a property) is as important as a structures thermal
performance. The ICF Tech system achieves as low as 0.74m3/m2/hr @ 50Pa* without the need for additional
measures. All our construction interfaces exceed ACD performance levels, with the main problem interface (lintel)
achieving ECD level perfomance with a value of just 0.024 W/m2K.
ICF tech
R
10
ICF tech
R
Technical information
Technical
A complete ICF
system
Structural core sizes
The system has been designed with two main structural
core sizes, 100mm* and 150mm. The 100mm Form
(HouseForm) has a structural width of 250mm and has
been designed for a minimum of three storey
construction, with intermediate concrete floors and
minimal rebar. Our 150mm Form (WallForm) has a
structural width of 350mm and has been designed for
apartment blocks and flats.
Design flexibility
Our ICF has been designed to be metric modular and
can be cut to length at 25mm increments. Our reduced
wall thickness can give greater space inside or a smaller
building footprint; just 250mm wide for our HouseForm;
but with the strength to allow larger unsupported internal
spans than conventional forms of construction.
Recycled materials
The ICF Tech system has been designed from the outset to use as much recycled material in its
construction. All the extrusions are made from recycled PVC; the webs within the Forms are made
from recycled polypropylene and all our waste from site is bagged and returned to our central
depot for processing.
Any finishes
Our Forms have an embedded plastic web at 300mm
spacings. This web has been designed to hold 64kg/m2
with a comfortable factor of safety. This will allow slip
systems, timber cladding or heavy clay tiles to be fixed
with ease; virtually any look you wish.
13
Technical
No voids
Some ICFs have had bad press in the past as they
tend to rely on conventional concrete which does
not always consolidate properly. Our system is
designed to take the additional pressures of SCC
mixes. We designed it this way because it ensures
that the concrete gets where it is supposed to, with
no voids. Our BBA process required that all
susceptible areas where checked for proper filling
and compaction.
Basement construction
We use tried and tested waterproofing systems to
ensure a watertight construction. We also use
advanced concrete additives such as BASFs
Watertight system where required This advanced
concrete additive can only be used with SCC
mixes, just as well our system can handle the
pressure. We construct to meet type A and type B
basement requirements.
Trained installers
We train and use our own installers to ensure that every build is
completed professionally. Although building with ICFs has been
compared to building with lego, it is not quite that simple; almost,
but not quite.
Checklists are used pre and post concrete pours to ensure that
the ICF wall is properly filled, plumb and that any other specific
requirements are met (services etc.)
Quality control
Concrete is at the heart of our system so we ensure
that each delivery is checked for the correct slump.
We have developed a close working relationship
with several of the major concrete providers and
Technical
Bracing &
alignment system (B&A)
strongback keeps
the wall plumb
strong working
platform
BS EN 13374:2004
BS EN 1991-1-4:2005
BS EN 12811-1:2003
FormCloser
Designed to seal the core around window
and door openings prior to the concrete
being pumped in. Its a recycled PVC
Floor ledger
To speed-up the erection of timber floors,
ICF Tech uses a tried and tested steel
floor ledger system from Simpson
Strongtie that is embedded into the EPS
blocks as the wall is erected. The
concrete is then pumped into the ICF core
and secures the Floor Ledger in place
Simpson Strongtie
ICFLC
15
Technical
FormLok
Raising pieces
Our single interlock raising piece (SIRP) is
designed to provide additional storey
height increases in 75mm increments
whilst our Double Interlock Raising Pieces
(DIRP) ensures interlock integrity,
regardless of finished floor height, when
Raising Piece
Rebar Cradle
Rebar cradle
Another example of innovation with our
ICF design. Simply insert into the top and
sides of the FormCloser and rotate
through 90 degrees and you have a rebar
cradle ready to accept rebar to form the
lintol above openings and the required
Technical
the opening.
HouseForm straight
WallForm straight
1200A
1200A
HouseForm corner
WallForm corner
725A
425D
775A
475D
475B
175C
475B
175C
FloorForm 100mm
straight
FloorForm 150mm
straight
1200A
1200A
175A
175A
425B
475B
175A
175A
425B
475B
Waterbar Web
ICF Techs unique way of creating a waterproof vertical joint between
1
2
3
4
5
17
Technical
forms.
ICF tech
R
Shouldnt you
be using it?
11