Escolar Documentos
Profissional Documentos
Cultura Documentos
Flex Technology
A Commitment to the
Construction Industry
Elco Construction Products provides a broad
range of quality fasteners and value-added
services designed to speed construction, improve
building integrity and ensure performance under
demanding conditions.
Dril-Flex structural drill screws that are virtually
immune to embrittlement failure
Bi-Flex 300 series (18-8) stainless steel selfdrilling
screws
Drilltite precision milled drill screws for greater drill
consistency
Drilit screws with forged self-drilling points in a
variety of styles
AlumiFlex 300 series stainless steel self-drilling
screws
UltraCon masonry fasteners now available in blue,
silver, white or bronze Stalgard finish in 3/16", 1/4"
and 5/16" diameters
ConFlex large diameter masonry fasteners
Aggre-gator 300 series (18-8) stainless steel
bimetal concrete anchors
NEW Suspender dual-head threaded rod
anchoring system
Fab-Lok clamping fasteners
In addition, many of the products shown in this
catalog can be customized to meet the needs of
your application.
We have attempted to make this catalog as complete
and accurate as possible, but changes are inevitable.
More part numbers and product lines will be added
on a regular basis. Visit our website for the most
uptodate literature.
New Product Development
Our close relationship with the construction industry
has led to many innovative products customized
for specific applications. Our application engineers
can work directly with you to find solutions for your
particular need.
www.elcoconstruction.com
Table of Contents
Stalgard High-Performance Protective Coatings..................................7
Drill Screw Technical Information............................................................8
Drill Screws
Stalgard durable, multi-layer, corrosion-resistant coatings are engineered to provide optimal performance in
demanding construction applications. These environmentally-friendly finishes are free of chromates and silicates
and any process, like electroplating, that might induce hydrogen embrittlement, preventing structural failures.
pliant
om
RoHS
2002/9
EC . C
5/
RoHS compliant
(chrome-free)
Stalgard GB
(Galvanic Barrier) Coating
Standard on all Elco stainless steel fasteners
Prevents a galvanic reaction between the stainless steel and dissimilar
application materials, which could lead to fastener and/or joint failure
Salt spray resistance: 1000 hours per ASTM B117
Available color: Silver
Stalgard SUB
Ultimate Barrier Coating
For more severely-corrosive environments
Salt spray 2,000 hours per ASTM B117
Available color: Silver
Drill Screws
Technical Information
Ultimate Strength Values
Shear Values
Size
8-18
8-32
10-16
10-24
12-14
12-24
1/4-14
1/4-20
5/16-12
5/16-18
11/32-12
23/64-12
Tensile
Lbs.
Min.
1,615
1,890
2,200
2,362
2,950
3,400
3,850
4,276
7,650
8,903
8,550
9,150
Shear
Avg.
Lbs.
Ult.
1,100
1,228
1,470
1,535
1,960
2,275
2,580
2,860
5,100
5,247
5,700
6,100
Torque
Min.
In-Lbs.
42
48
61
65
92
100
150
168
250
438
400
425
Gauge
Desc. Pt. 26
8-18
2 301
10-16 1 403
10-16 3
12-14 1 437
12-14 2 370
12-14 3
12-24 4
12-24 4.5
12-24 5
1/4-14 1 519
1/4-14 3
1/4-20 5
24
500
585
461
718
607
863
22
20
18
16
14
12
542 742 1,049
1,655 2,277
0.125
(1/8")
2,573
2,257
2,226
3,210
Shear
Pull-Out
Point
Descrip.
Type
8-18
2
10-16
1
10-16
3
12-14
1
12-14
2
12-14
3
12-24
5
1/4-14
1
1/4-14
3
1/4-20
3
1/4-20
5
3
5/16-12
(.260 dia.)
3
5/16-18
(.290 dia.)
14-10 SS
A
1/4-14 SS
B
Material Thickness
16
14
12
Ga.
Ga.
Ga.
702
961 1,615
826 1,092 1,791
702
970 1,495
920 1,262 1,940
852 1,186 1,863
767 1,078 1,553
1,060 1,288 1,844
1,169
26
Ga.
120
151
130
161
154
142
228
150
24
ga.
197
242
206
260
247
214
342
238
22
Ga.
268
315
272
332
286
296
432
301
20
Ga.
301
361
303
394
379
349
311
571
340
337
18
Ga.
494
565
498
640
609
580
452
801
702
571
491
706
457
568
270
216
363
344
426
383
459
411
657
571
1,194 1,368
686
983 1,698 2,242 2,693 3,695 3,746 3,484
.120"
2,345
1,956
2,205
2,120
2,447
3,431
3,237
4,066
4,801 5,261
NOTE: Test values shown are ultimate average values obtained under laboratory conditions
and apply to fasteners manufactured by Elco Construction Products only.
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
Drill Screws
Technical Information
RPM
#8
2500
#10
#12
1800
1/4"
5/16"
1200
Standard Sheet
Metal Sizes
Gauge
Decimal
26
0.018
24
0.024
22
0.030
20
0.038
18
0.048
16
0.060
14
0.075
12
0.106
Nominal
Screw Sizes
Thread
Dia.
Decimal
#6
.140
#7
.150
#8
.160
#9
.180
* NOTE: Some drill and tap capacities may vary due to special features on some
fasteners. Refer to product performance specifications for any individual fastener to
confirm performance and capabilities.
#10
.190
#11
.200
#12
.210
1/4
.240
#14
.250
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
Catalog No.
Description
Point Type
#8 Diameter, 1/4" Hex Washer Head
EDA236-I
8-18 x 1/2"
#2 Drilit
EDA261-I
8-18 x 3/4"
#2 Drilit
EDA286-I
8-18 x 1"
#2 Drilit
#8 Diameter, #2 Phillips Pan Head
EDD251-I
8-18 x 1/2"
#2 Drilit
EDD266-I
8-18 x 3/4"
#2 Drilit
EDD291
8-18 x 1"
#2 Drilit
#10 Diameter, 5/16" High Hex Washer Head
EDB401
10-16 x 1/2"
#3 Drilit
EDB426
10-16 x 5/8"
#3 Drilit
EDB446
10-16 x 3/4"
#3 Drilit
10-16 x 3/4"
#3 Drilit
EFC460- I
EDC450
10-16 x 3/4"
#1 Drilit
EDB486
10-16 x 1"
#3 Drilit
EDB541
10-16 x 1-1/2"
#3 Drilit
EDB571
10-16 x 2"
#3 Drilit
#12 Diameter, 5/16" Hex Washer Head
EDC745
12-14 x 3/4"
#1 Drilit
EDB741
12-14 x 3/4"
#3 Drilit
EDB761
12-14 x 1"
#3 Drilit
EDB782
12-14 x 1-1/4"
#3 Drilit
EDB801
12-14 x 1-1/2"
#3 Drilit
EDB821
12-14 x 2"
#3 Drilit
EDB840
12-14 x 3"
#3 Drilit
EDB845
12-14 x 4"
#3 Drilit
1/4" Diameter, 3/8" Hex Washer Head
EDB936
1/4-14 x 3/4"
#3 Drilit
EDC930
1/4-14 x 7/8"
#1 Drilit
EDB946
1/4-14 x 1"
#3 Drilit
EDB956
1/4-14 x 1-1/4"
#3 Drilit
EDB961
1/4-14 x 1-1/2"
#3 Drilit
EDB971
1/4-14 x 2"
#3 Drilit
EDB981
1/4-14 x 3"
#3 Drilit
EDB983
1/4-14 x 4"
#3 Drilit
Finish
Carton Quantity
Weight/Carton
Stalgard
Stalgard
Stalgard
10,000
8,000
5,000
36
37
27
Stalgard
Stalgard
Stalgard
10,000
10,000
8,000
34
44
43
Stalgard
Stalgard
Stalgard
Zinc
Stalgard
Stalgard
Stalgard
Stalgard
8,000
6,000
6,000
6,000
5,000
5,000
3,000
2,000
39
45
47
47
39
46
35
29
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
5,000
5,000
4,000
3,000
2,500
2,000
1,000
500
45
46
41
36
35
34
24
15
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
3,500
4,000
3,000
2,000
2,000
1,500
800
500
48
38
47
37
39
38
28
23
10
Catalog No.
Description
Point Type
Washer O.D.
Finish
1/2"
1/2"
Stalgard
Stalgard
4,000
2,000
31
28
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
3,000
2,500
2,500
2,000
2,500
2,000
1,500
1,000
500
2,500
2,000
1,000
34
31
32
27
39
33
30
27
15
35
28
20
5/8"
9/16"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
Stalgard
2,500
2,500
2,000
1,500
1,500
1,000
800
500
40
32
37
31
34
27
29
24
Correct
Overdriven
Underdriven
11
Cat. No.
Description
Cat.
No.
Dia. TPI
Len.
Finish
Typical Wood
Thickness
Drilling Capacity
(min. max. in steel)
Qty. Per
Shipper
Wt. Per
Shipper
Gray Stalgard
Gray Stalgard
Gray Stalgard
Gray Stalgard
Gray Stalgard
Gray Stalgard
3/8"
1/2"
5/8"
3/4"
3/4"
3/4"
.036" .187"
.036" .187"
.036" .187"
.036" .187"
.036" .187"
.036" .150"
8,000
6,000
5,000
4,000
3,500
2,500
43
43
38
40
35
29
Gray Stalgard
1"
.060" .250"
2,000
29
Gray Stalgard
Gray Stalgard
Gray Stalgard
1-1/4"
1-5/8"
1-3/4"
.060" .250"
.060" .250"
.030" .150"
2,000
1,500
1,000
32
30
24
Gray Stalgard
Gray Stalgard
2"
3"
.060" .250"
.060" .250"
1,000
30
Point Type
3,500
1,000
1,000
Weight/
1/4 Keg
30
21
28
12
Catalog No.
Description
Point Type
Finish
Carton Quantity
Carton Weight
#12 Diameter Decking Fasteners and Drill Screws for Steel Thicknesses of .175" to .500"
EDC801
12-24 x 7/8"
#4 Drilit
Stalgard
4,500
47
EDC816
12-24 x 1-1/4"
#4.5 Drilit
Stalgard
3,500
50
ECC720
12-24 x 1-1/4"
#5 Drilltite
Stalgard
4,000
45
ECC740
12-24 x 1-1/2"
#5 Drilltite
Stalgard
2,500
40
ECC750
12-24 x 2"
#5 Drilltite
Stalgard
2,000
35
1/4" Diameter Decking Fasteners and Drill Screws for Steel Thicknesses of .175" to .500"
ECC940
1/4-20 x 3"
ECC950
1/4-20 x 4"
ECC960
1/4-20 x 5"
ECC970
1/4-20 x 6"
ECC980
1/4-20 x 8"
#5 Drilit
Stalgard
1,000
36
#5 Drilit
Stalgard
1,000
46
#5 Drilit
Stalgard
500
31
#5 Drilit
Stalgard
500
37
#5 Drilit
Stalgard
150
16
NOTE: 1/4-20 drill screws with #5 points are available with bonded washers.
13
TapFast Fasteners
For use in metal-to-wood applications
High-performance fastener designed specifically for attaching lightgauge metal
panels (18 ga. max.) to wood frame structures.
Features &Benefits
Aluminum bonded sealing washer
High-low thread increases
performance
Easily penetrates multiple panel
thicknesses
Stalgard coating provides 1000 hours
of salt spray resistance
(per ASTM B117)
Specifications
Size:#10
Lengths:1" to 3"
Head/Drive: 1/4" HWH
Thread: Hi-lo
Point: Type 17
Material: Carbon steel
Finish: Stalgard coating
Catalog No.
Description
Point
Finish
Carton Quantity
Carton Weight
10-16 x 1"
Type 17
Stalgard
3,000
26
EHH230
10-16 x 1-1/2"
Type 17
Stalgard
2,500
29
EHH250
10-16 x 2"
Type 17
Stalgard
1,500
20
EHH265
10-16 x 2-1/2"
Type 17
Stalgard
1,000
17
EHH280
10-16 x 3"
Type 17
Stalgard
800
16
Performance Data
Wood Type: SPF (Spruce, Pine or Fir) .38.39 Specific Gravity
Pull-Out (Lbs.)
Embedment (in.)
Force Orientation relative to wood's grain
With the grain (Into thin side)
Against the grain (Into wide side)
Edge Distance
3/4"
1 1/2"
1"
385
366
Edge Distance
3/4"
1 1/2"
1"
447
322
1-1/2"
553
591
2"
887
890
Shear (Lbs.)
Force Orientation relative to wood's grain
With the grain (Into thin side)
Against the grain (Into wide side)
Embedment (in.)
1-1/2"
2"
484
647
655
654
Pull-Out (Lbs.)
Force Orientation relative to wood's grain
With the grain (Into thin side)
Against the grain (Into wide side, near edge)
Edge Distance
3/4"
3/4"
Embedment (Inches)
1"
1-1/2"
2"
1,118
1,647
1,947
1,220
1.572
1,806
Edge Distance
3/4"
3/4"
Embedment (Inches)
1"
1-1/2"
2"
782
887
939
663
686
724
Shear (Lbs.)
Force Orientation relative to wood's grain
With the grain (Into thin side)
Against the grain (Into wide side, near edge)
infastech/Elco Test Report Number 1002192
1
4
Description
Drive System
Point Type
Finish*
Carton Quantity
Carton
Weight
EDO450
10-16 x 1"
#2 Phillips
#3
Silver Stalgard
4.000
34
EDO460
10-16 x 1-1/2"
#2 Phillips
#3
Silver Stalgard
3,000
34
EDO470
10-16 x 2"
#2 Phillips
#3
Silver Stalgard
2,000
28
EDO735
12-14 x 1"
#2 Phillips
#3
Silver Stalgard
4,000
40
Catalog No.
For Steel
10-12 x 1"
#2 Phillips
Pierce
Gray Stalgard
4,000
37
ETA855
10-12 x 1-1/2"
#2 Phillips
Pierce
Gray Stalgard
3,000
33
ETA860
10-12 x 2"
#2 Phillips
Pierce
Gray Stalgard
2,000
27
ETA870
12-11 x 1"
#2 Phillips
Pierce
Gray Stalgard
4,000
40
Performance Data
Pull-Out Values (Lbs)
Diameter
Point Type
26 ga.
24 ga.
22 ga.
20 ga.
18 ga.
14 ga.
12 ga.
#10
#12
#3
#3
139
142
206
214
272
296
303
349
498
580
970
1078
1495
1553
Diameter
Point Type
1/2" Plywood
5/8" Plywood
3/4" Plywood
Yellow Pine
3/4" OSB
#10
#12
Pierce
Pierce
366
378
381
393
401
429
582
677
290
329
Point
Type
20 ga.
18 ga.
16 ga.
14 ga.
#10
#3
301
503
710
969
#12
#3
775
1361
1624
1974
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these
fasteners is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety
of application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document. For
additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
15
Features &Benefits
Stalgard SUB coating (Hex washer
product only) provides 2000 hours of
salt spray resistance (per ASTM B117)
High-hardness points and lead threads
for drilling and tapping with
lower-hardness in load-bearing
threads for ductility
Virtually immune to delayed
embrittlement failures
Finish
Carton
Quantity
Carton
Weight
Stalgard SUB
Stalgard SUB
Stalgard SUB
Stalgard SUB
6,000
2,500
2,000
1,500
48
30
28
25
Stalgard
6,000
36
Stalgard
5,000
44
Stalgard SUB
Stalgard SUB
Stalgard SUB
Stalgard SUB
Stalgard SUB
5,000
4,000
2,500
2,000
1,000
54
44
38
37
27
Stalgard
Stalgard
4,000
2,500
36
26
Stalgard SUB
Stalgard SUB
Stalgard SUB
Stalgard SUB
Stalgard SUB
Stalgard SUB
Stalgard SUB
Stalgard SUB
Stalgard SUB
Stalgard SUB
3,000
2,000
2,000
1,500
1,500
2,500
1,000
1,000
500
500
54
45
48
41
45
51
27
45
22
23
Stalgard
Stalgard
500
500
20
23
Stalgard SUB
Stalgard SUB
Stalgard SUB
1,000
1,000
1,000
37
40
49
Stalgard SUB
500
18
Load-Bearing Area:
Hex Washer
Head
Undercut
Head
Pan Head
Wafer Head
16
Drill
Cap.
.150
.187
.187
.312
.210
.312
.075
18
396
396
398
16
501
527
530
516
14
634
710
686
649
12
1595
1678
1950
1912
2333
2148
1/8
1693
2061
2264
2296
2856
2573
3/16
1/4
5/16
2898
3919
2928
3561
4488
4226
5424
6622
Aluminum 6063-T5
1/8"
1/4"
939
1003
897
1120
1043
2286
2424
2075
2967
2566
3/8"
3683
4796
1843
18-18
ga.
1362
1315
1395
1350
1509
18-14
ga.
1733
2118
2313
2086
2300
16-16
ga.
1462
1655
1681
1582
1811
14-14
ga.
1/8"3/16"
3/16"1/4"
1/4"12 ga.
1816
2417
2450
3255
2600
2814
2810
2706
5486
5283
4761
6750
Screw
Size
10-16
12-14
1/4-14
1/4-20
5/16-18
5/16-24
Point Drill
Type Cap.
3
3
3
4
3
4
.150
.187
.210
.312
.210
.312
Aluminum 6063-T5
1/8" - 1/8"
1/8" - 1/4"
1466
1797
1996
2006
2132
1849
2483
2883
2926
3009
2926
NOTE: All test setups and dimensions were as limited and outlined in AISI Test Method for Mechanically Fastened Cold-Formed Steel
Connections (CF92-1) document. Performance values listed are ultimate values obtained under laboratory conditions.
Embrittlement Tests
Galvanic Series
Anodic End
Metal/Alloy
EMF(v)
Magnesium................................ -1.60
Zinc............................................. -1.10
Alum (5000, 6000, 7000)...........
-.75
Iron, Low Alloy Steels................
-.70
Alum (2000)...............................
-.60
Lead............................................
-.55
18% Chromium Steel.................
-.35
Naval Brass.................................
-.30
Brass, Bronze..............................
-.25
Austenitic Stainless (300 Series)
-.20
Nickel..........................................
-.15
Silver........................................... 0
Gold............................................ +15
Approvals
ICC-ES Report No. ESR-3332
COLA (City of Los Angeles) Research Report #25095
Identification
(hex washer head shown)
Elco
logo
raised circle
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
17
Finish
Load-Bearing
Length
Quantity
Weight
Stalgard SUB
Stalgard SUB
Stalgard SUB
1.00"
1.49"
1.99"
500
500
500
34
40
46
Stalgard SUB
Stalgard SUB
Stalgard SUB
0.875"
1.365"
1.865"
250
250
250
36
41
47
Stalgard SUB
Stalgard SUB
Stalgard SUB
0.800"
1.24"
1.74"
250
150
150
46
33
38
Size
Catalog No.
Performance Data
Seating Torque (inlbs)
Fastener
Size
3/8-16
1/2-13
5/8-11
6063 T5 Aluminum
1/8
3/16
1/4
171
214
285
255
368
471
261
486
662
6061 T6 Aluminum
1/8
3/16
1/4
231
328
490
338
547
767
343
694
943
Note: These numbers were calculated from the maximum reading (failure torque) during drive-to-fail testing (Seating Torque = Failure
Torque x .75).
6061 T6 Aluminum
1/8 to 3/16 to 1/4 to
1/8
3/16
1/4
3560
5205
6885
4482
6167
8718
4216
6768
9292
18
6063 T5 Aluminum
1/8
3/16
1/4
1311
2365
3281
1431
2230 3694
1755
2907
4191
6061 T6 Aluminum
1/8
3/16
1/4
2080 3805
5981
2190
3869
7527
2641
5202
8210
1/8
3501
3668
4500
1018
3/16
5986
7411
8300
Steel
1/4
3/8
11440 11862
13613 20440
16678 26680
6061 T6 to
1/8 to 3/16 to
1/8
3/16
5711
8701
6052
9769
5967
9577
1018 Steel
1/4 to 1/4 to
1/4
3/8
7721
7611
13976
13340
13124
15309
Identification
Elco logo
raised
circle
E-Form
Profile
Specifications
Diameters:#10 to 1/4"
Lengths: 3/4" to 8"
Drive Systems: Hex and phillips
Material: Hardened steel tapping
threads and point fused onto
an 18-8 stainless steel shank
and head
Finish: Stalgard GB
(Galvanic Barrier) coating
Catalog
No.
Hex Washer Head
EAJ100
EAJ102
EAJ110
EAJ120
EAJ140
EAJ185
EAJ215
EAJ190
EAJ220
EAJ260
EAJ240
EAJ320
EAJ340
EAJ415
EAJ430
EAJ445
EAJ540
EAJ580
EAJ600
EAJ610
EAJ615
EAJ640
EAJ650
EAJ630
EAJ660
EAJ670
EAJ675
EAJ680
EAJ690C
Dia. TPI
L
Length
Drive
System
Point
Size
B
Maximum Loadbearing Length*
Pieces
per
1/4 Keg
Weight
per
1/4 Keg
8-18
8-18
10-16
10-16
10-16
12-14
12-14
12-14
12-14
12-14
12-14
12-24
12-24
1/4-14
1/4-14
1/4-14
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
3/4"
1"
3/4"
1"
1-1/2"
1"
1-1/2"
1"
1-1/2"
2-1/2"
2"
1-1/2
2"
1"
1-1/2"
2"
1"
1-1/2"
1-1/2"
2"
2"
2-1/2"
3"
3"
4"
4"
5"
6"
8"
5/16" hex
5/16" hex
5/16" hex
5/16" hex
5/16" hex
5/16" hex
5/16" hex
5/16" hex
5/16" hex
5/16" hex
5/16" hex
5/16" hex
5/16" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
3/8" hex
2
2
2
2
2
2
2
3
3
3
2
5
5
2
2
2
3
3
5
3
5
3
3
5
3
5
5
5
5
0.32"
0.50"
0.32"
0.50"
1.10"
0.50"
1.00"
0.50"
1.00"
2.00"
1.50"
0.60"
1.10"
0.50"
1.00"
1.50"
0.50"
1.00"
0.60"
1.50"
1.10"
2.00"
2.50"
2.10"
3.50"
3.10"
4.10"
5.10"
7.10"
5,000
5,000
5,000
5,000
2,500
3,000
2,500
4,000
2,500
1,000
1,500
2,500
2,000
2,500
1,000
1,500
2,500
1,000
1,000
1,500
1,500
1,000
500
500
500
500
250
250
150
23
27
32
46
39
31
34
41
34
21
26
40
35
40
30
25
40
32
32
38
38
32
18
18
22
23
16
18
15
* The load-bearing length is the length of 300 series stainless under the hex, pan or pancake head or including the flat
head. Hardened steel length (lead threads and point) should be through the connection and not in the load bearing
section of the connection.
1
9
L
Length
Drive
System
Point
Size
B
Maximum Loadbearing Length*
Pieces
per
1/4 Keg
Weight
per
1/4 Keg
EBN140
10-16
1-1/2"
#2 phillips
0.800"
3,500
30
EBN345
12-24
2-13/16"
#3 phillips
1.710"
1,000
21
EBN645
1/4-20
2-13/16"
#3 phillips
1.710"
1,000
28
EBN200
12-14
1"
#3 phillips
0.500"
4,000
31
EBN240
12-14
1-1/2"
#3 phillips
1.00"
2,500
29
EBN630
1/4-20
3"
#3 phillips
2.500"
500
18
EBN640
1/4-20
4"
#3 phillips
3.500"
500
22
EAX100
8-18
3/4"
#2 phillips
0.320"
5,000
22
EAX102
8-18
1"
#2 phillips
0.500"
5,000
27
EAX110
10-16
3/4"
#2 phillips
0.320"
5,000
30
EAX120
10-16
1"
#2 phillips
0.500"
5,000
37
EBN300
10-16
1"
#2 phillips
0.500"
4,000
29
EBN320
12-14
1"
#2 phillips
0.500"
4,000
40
Pan Head
Pancake Head
* The load-bearing length is the length of 300 series stainless under the hex, pan or pancake head or including the flat
head. Hardened steel length (lead threads and point) should be through the connection and not in the load bearing
section of the connection.
2
0
Identification
The head marking consists of the
number 3 above the Elco logo as
shown to the left.
Screw
Size
Pt.
Drill
Capacity
(in.)
18 ga.
16 ga.
8-18
#2
0.100
499
558
Pull-Out (Lbs)
Steel RB60-75
50 66KSI
14 ga.
12 ga.
1/8"
3/16"
875
1425
1/4"
Aluminum 6063-T5
22KSI
1/8"
1/4"
10-16
#2
0.110
595
633
943
1433
994
10-16
#3
0.187
616
684
1242
1605
1527
961
12-14
#2
0.110
528
750
892
1536
1132
12-14
#3
0.230
417
679
802
1371
2028
2499
974
12-24
#5
0.500
2110
2781
538
1995
1/4-14
#2
0.110
619
885
1082
1830
2943
1310
1/4-20
#3
0.230
680
780
1442
2623
3684
4069
1037
1/4-20
#5
0.500
2622
1724
Ultimate Strengths**
Size
10-16
12-14
12-24
1/4-14
1/4-20
Tensile
(Lbs)
1847
2628
2734
3459
4124
Shear
Average Lbs Ultimate
1282
1950
2284
2676
2860
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
1
2
Description
Point Type
Finish
Carton Quantity
Carton Weight
#3
#3
#3
Stalgard GB
Stalgard GB
Stalgard GB
8,000
6,000
5,000
51
46
45
#3
Stalgard GB
10,000
44
#3
#3
#3
Stalgard GB
Stalgard GB
Stalgard GB
5,000
5,000
3,000
40
52
44
#3
#3
#3
#4
#4
Stalgard GB
Stalgard GB
Stalgard GB
Stalgard GB
Stalgard GB
3,500
3,000
2,000
2,000
2,000
51
48
41
35
42
#3
Stalgard GB
4,500
42
Yield
(Fy)
1,766
2,300
3,180
3,225
Ultimate
(Fu)
1,778
2,320
3,197
3,266
PSI
Yield
(Fy)
93,937
93,268
97,888
101,438
Ultimate
(Fu)
94,580
94,061
98,433
102,709
Size
#10-16
#12-14
1/4-14
1/4-20
Pt.
3
3
3
4
.060"
834
668
769
.090"
1,275
1,611
1,963
1,794
.125"
1,306
1,692
2,255
2,163
.187"
1,744
2,275
2,176
Features &Benefits
Provides a very high level of corrosion
resistance
Coating allows greater galvanic
compatibility in dissimilar metal
applications involving aluminum
Head marked with a 3 for easy
identification
Ult. Shear
Strength of
.250" .312"
Fastener
1,152
1,545
2,122
2,244 2,244
2,139
Identification
The head marking consists of
the number 3 below the
Elco logo.
hex washer
head
flat
head
Pt.
3
3
3
.060"
341
347
386
.090"
849
859
955
1,208
.125" .187"
.250"
.312"
1,460
1,533 2360*2
22
Catalog No.
Description
Finish
Type F Thread-Cutting, Hex Washer Head
EHE310
1/4-20 x 3/4"
Stalgard GB
EHE312
1/4-20 x 1"
Stalgard GB
EHE314
1/4-20 x 1-1/4"
Stalgard GB
Type F Thread-Cutting, Phillips Flat Head
EHE321
1/4-20 x 1"
Stalgard GB
Type F Thread-Cutting, Phillips Flat Undercut Head
EHE110
10-24 x 1/2"
Stalgard GB
EHE211
12-24 x 1/2"
Stalgard GB
Type B Self-Tapping with 1/4" Lead Point, Hex Washer Head
EHE336
14 x 1-1/2"
Stalgard GB
Type AB Self-Tapping, Hex Washer Head
EHE122
10 x 3/4"
Stalgard GB
EHE124
10 x 1"
Stalgard GB
EHE220
12 x 3/4"
Stalgard GB
EHE222
12 x 1"
Stalgard GB
EHE224
12 x 1-1/2"
Stalgard GB
EHE342
14 x 1"
Stalgard GB
EHE344
14 x 1-1/4"
Stalgard GB
EHE346
14 x 1-1/2"
Stalgard GB
Type AB Self-Tapping, Phillips Flat Undercut Head
EHE352
14 x 1"
Stalgard GB
Type AB Self-Tapping, Phillips Flat Head
EHE232
12 x 1"
Stalgard GB
EHE234
12 x 1-1/2"
Stalgard GB
EHE362
14 x 1"
Stalgard GB
EHE366
14 x 1-1/2"
Stalgard GB
Type AB Self-Tapping, Phillips Pan Head
EHE240
12 x 3/4"
Stalgard GB
EHE244
12 x 1-1/2"
Stalgard GB
EHE370
14 x 3/4"
Stalgard GB
EHE372
14 x 1"
Stalgard GB
Carton Quantity
Carton Weight
2,500
2,500
2,000
55
45
41
2,500
30
8,000
5,000
32
30
2,000
44
5,000
5,000
4,000
4,000
2,500
2,500
2,000
2,000
33
39
34
41
34
40
35
43
2,500
44
4,000
2,500
2,500
2,000
33
39
34
41
4,000
2,500
3,500
2,500
34
40
35
43
23
Type F
Type B
Type AB
Head Style
Screw Dia.
Ultimate
Yield
Ultimate
Tensile
Ultimate
Shear
Screw Material
KSI
Hex Washer
Flat
Undercut Flat
Undercut Flat
Hex Washer
Hex Washer
Hex Washer
Hex Washer
Undercut Flat
Flat
Flat
Pan
Pan
1/4
1/4
#10
#12
#14
#10
#12
#14
#14
#12
#14
#12
#14
3203
2945
1717
2243
3038
1602
2386
3033
2819
1916
1916
2819
2819
3274
3203
1839
2322
3233
1616
2399
3187
3217
2130
2130
3217
3217
2259
2123
1222
1604
2249
1165
1639
2228
2230
2230
2230
2230
2230
103
101
105
96
99
86
97
98
99
86
86
99
99
Hex Washer
Type F
24
Type B
with lead
Phillips Pan
Phillips Flat
Phillips Flat
Undercut
AllFlex headmarking
Type
AB
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
Fab-Lok Fasteners
To maintain panel integrity in high-stress and high-vibration environments
Vibration, either from inside or outside a building, can make ordinary fasteners
loosen and back out. Fab-Lok fasteners combine a slotted aluminum sleeve
and fastener to provide high resistance to vibration loosening. Excellent for
use with insulated panels.
Specifications
Drive System: Hex
Materials: Low carbon steel or 300
series stainless steel screw with
aluminum sleeve
Finish: Zinc
Features &Benefits
Hex washer head machine screw
assembled to a slotted aluminum sleeve
and EPDM sealing washer
After tightening, clamping tines remain
in place even if screw is removed
Greater joint integrity with
clamping force
Description
Penetrating
Length
Grip Range
Carton
Quantity
Carton Weight
EZJ100
FAS-10-4
1.373"
.062" .250"
1,000
22
EZJ120
FAS-10-8
1.612"
.250" .500"
1,000
23
EZJ140
FAS-10-12
1.807"
.500" .750"
1,000
27
Catalog No.
Carbon Steel
FAC-10-4
1.373"
.062" .250"
1,000
21
EZJ230
FAC-10-8
1.612"
1,000
25
EZJ250
FAC-10-12
1.807"
.500" .750"
1,000
27
*Fab-Lok fastener is inserted into a 5/16" hole (hole size is not critical) then installed
with a power driver equipped with a Fab-Lok holding sleeve, with a socket designed to
fit DeWalt tools DW969K-2, DW968K-2, DW267, DW268 and DW269. Max. 1000 RPM
during installation.
Screw Material
Carbon
Stainless
2159
1950
before installation
after installation
Pull-Out (lbs)
Single Sheet
Material Thickness
26 ga.
24 ga.
20 ga.
18 ga.
16 ga.
14 ga.
Double Steel Sheet
Material Thickness
26 ga.
20 ga.
Pull-Out
612
776
888
934
1011
1069
Failure Mode
Sheet Split
Sheet Split
Sheet Split
Sheet Split
Broken Fastener
Broken Fastener
Pull-Out
816
1084
Failure Mode
Sheet Split
Broken Fastener
Pull-Out
833
Failure Mode
Broken Fastener
25
Avdel N Rivets
Protruding head nail rivets for metal to metal applications
The N Rivet relies on a unique mandrel head design to complete the application
joint and ensure positive stem retention after installation.
Specifications
Diameters: 1/8", 5/32" and 3/16"
Lengths: .275" to .980"
Grip ranges: .020" to .750"
Body/Mandrel material:
Aluminum/Aluminum
Steel/Steel
Aluminum/Steel
Stainless/Stainless
Bulk
Cat. No.
AAPS-04-02
AAPS-04-03
AAPS-04-04
AAPS-04-05
AAPS-04-06
AAPS-04-08
AAPS-05-02
AAPS-05-04
AAPS-05-06
AAPS-05-08
AAPS-06-02
AAPS-06-04
AAPS-06-06
AAPS-06-08
AAPS-06-10
AAPS-06-12
2
6
Bulk
Cat. No.
BSPS-04-02
BSPS-04-03
BSPS-04-04
BSPS-04-05
BSPS-04-06
BSPS-04-08
BSPS-05-04
BSPS-05-06
BSPS-06-02
BSPS-06-04
BSPS-06-06
BSPS-06-08
BSPS-06-10
BSPS-06-12
Size
42
43
44
45
46
48
54
56
62
64
66
68
610
612
Bulk
Cat. No.
SSPS-04-02
SSPS-04-03
SSPS-04-04
SSPS-04-05
SSPS-04-06
SSPS-04-08
SSPS-05-04
SSPS-05-06
SSPS-06-02
SSPS-06-04
SSPS-06-06
SSPS-06-08
SSPS-06-10
SSPS-06-12
Bulk
Qty.
10,000
10,000
10,000
10,000
10,000
10,000
5,000
5,000
4,000
4,000
4,000
3,000
3,000
3,000
Size
42
43
44
45
46
54
56
62
64
66
68
Bulk
Cat. No.
CCPS-04-02
CCPS-04-03
CCPS-04-04
CCPS-04-05
CCPS-04-06
CCPS-05-04
CCPS-05-06
CCPS-06-02
CCPS-06-04
CCPS-06-06
CCPS-06-08
Bulk
Qty.
10,000
10,000
10,000
10,000
10,000
5,000
5,000
4,000
4,000
4,000
4,000
Avdel N Rivets
Protruding head nail rivets for metal to metal applications
Grip Ranges and Recommended Hole Size
Size
Grip Range
42
43
44
.188 - .250
45
.251 - .312
Hole Size
Grip Range
Grip Range
.063 - .125
52
.020 - .125
62
.020 - .125
.126 - .187
53
.126 - .187
64
.126 - .250
54
.126 - .250
66
.251 - .375
56
.251 - .375
68
.376 - .500
58
.376 - ..500
610
.501 - .625
612
.626 - .750
46
.313 - .375
48
.438 - .500
#30
(.1285")
Hole Size
Size
Size
#20
(.161")
Hole Size
#11
(.191")
Body
Mandrel
Shear
Tensile
1/8"
1/8"
1/8"
1/8"
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
3/16"
3/16"
Aluminum
Steel
Aluminum
Stainless
Aluminum
Steel
Aluminum
Stainless
Aluminum
Steel
Aluminum
Stainless
Aluminum
Steel
Steel
Stainless
Aluminum
Steel
Steel
Stainless
Aluminum
Steel
Steel
Stainless
120
260
170
420
190
370
260
650
260
540
380
950
150
310
220
530
230
470
350
820
320
680
500
1200
Installation Tools
N Rivet
Placement
Sequence
breaker
groove
rivet
body
Description
G-28
728A9-104
head
(protruding
shown)
mandrel
Head Styles
Protruding
Cat. No.
mandrel
head
Countersunk
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
Large Flange
7
2
Features &Benefits
Installs quickly when using Elco
installation tools
When all three elements of the
system are used, consistent
performance and maximum pullout
strengths can be realized
Stalgard coating provides
1000 hours of salt spray resistance
(per ASTM B117)
Boxed Anchors
100 anchors and 1 tanged drill bit per box; 6 boxes per carton.
Cat. No.
Blue Stalgard
Slotted Hex Washer Head
ELE300-100
ELE310-100
ELE320-100
ELE330-100
ELE340-100
ELE350-100
ELE360-100
ELE405-100
ELE415-100
ELE425-100
ELE435-100
ELE445-100
ELE455-100
ELE465-100
ELE475-100
ELE485-100
Phillips Flat Head
ELF305-100
ELF315-100
ELF325-100
ELF335-100
ELF345-100
ELF355-100
ELF365-100
ELF400-100
ELF410-100
ELF420-100
ELF430-100
ELF440-100
ELF450-100
ELF460-100
ELF470-100
ELF480-100
28
Size
Drive System
Quantity
Per Shipper
Weight
Per Shipper
3/16 x 1-1/4"
3/16 x 1-3/4"
3/16 x 2-1/4"
3/16 x 2-3/4"
3/16 x 3-1/4"
3/16 x 3-3/4"
3/16 x 4"
1/4 x 1-1/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
1/4 x 4"
1/4 x 5"
1/4 x 6"
600
600
600
600
600
600
600
600
600
600
600
600
600
600
100
100
5
7
8
10
11
13
13
9
12
14
16
19
21
22
5
6
3/16 x 1-1/4"
3/16 x 1-3/4"
3/16 x 2-1/4"
3/16 x 2-3/4"
3/16 x 3-1/4"
3/16 x 3-3/4"
3/16 x 4"
1/4 x 1-1/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
1/4 x 4"
1/4 x 5"
1/4 x 6"
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
600
600
600
600
600
600
600
600
600
600
600
600
600
600
100
100
4
6
7
9
10
12
13
8
10
12
14
16
18
19
4
5
ELG941
ELG948
ELG960
ELG979
ELG992
ELG998
Phillips Oversized Flat Head
White
Stalgard
Bronze
Stalgard
Size
Drive Size
Quantity
Per Case
Weight
Per Case
ELD195
ELD205
ELD215
ELD225
ELD235
ELD255
ELD265
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
1/4 x 5"
1/4 x 6"
2,000
1,500
1,000
1,000
500
500
500
38
34
27
31
16
22
26
ELD320
ELD330
ELD340
ELD350
ELD360
ELD370
ELD380
3/16 x 1-1/4"
3/16 x 1-3/4"
3/16 x 2-1/4"
3/16 x 2-3/4"
3/16 x 3-1/4"
3/16 x 3-3/4"
3/16 x 4"
5/16 x 2-1/4"
5/16 x 2-3/4"
5/16 x 3-1/4"
5/16 x 4"
5/16 x 5"
5/16 x 6"
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
5,000
3,000
2,500
1,500
1,000
1,000
1,000
1,000
1,000
500
500
500
500
35
28
29
21
16
19
12
34
41
24
29
16
21
ELG203-50
5/16 x 3"
#3 phillips
50
22
ELG204-50
5/16 x 4"
#3 phillips
50
29
ELG205-50
5/16 x 5"
#3 phillips
50
16
ELG206-50
5/16 x 6"
#3 phillips
50
21
ELD275
1/4 x 1-3/4"
5/16 hex
1,500
36
ELC151
ELD285
1/4 x 2-1/4"
5/16 hex
1,000
28
ELC160
ELD295
1/4 x 2-3/4"
5/16 hex
1,000
32
ELC170
ELD305
1/4 x 3-1/4"
5/16 hex
500
18
5/16 x 1-3/4"
5/16 x 2-1/4"
5/16 x 2-3/4"
5/16 x 3-1/4
5/16 x 3-3/4"
5/16 x 4"
5/16 x 5"
5/16 x 6"
5/16 hex
5/16 hex
5/16 hex
5/16 hex
5/16 hex
5/16 hex
5/16 hex
5/16 hex
1,000
1,000
800
500
500
500
250
250
30
37
22
25
29
30
18
22
ELG486
ELG491
ELG496
ELG501
ELG506
ELG511
ELG516
5/16 x 1-3/4"
5/16 hex
1,500
44
ELG487
5/16 x 2-1/4"
5/16 hex
1,000
36
ELG492
5/16 x 2-3/4"
5/16 hex
1,000
43
ELG497
5/16 x 3-1/4"
5/16 hex
500
25
ELG502
5/16 x 3-3/4"
5/16 hex
500
28
29
ELG771
ELD400
ELG801
ELD410
ELG831
ELD420
ELG861
ELD430
ELG891
ELD440
ELG921
ELD450
ELG945
ELG955
ELG965
ELG972
ELG976
ELG991
Bronze
Stalgard
Size
Drive Size
Quantity
Per Case
Weight
Per Case
ELG612
ELG832
ELG862
ELG892
3/16 x 2-3/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
1/4 x 4"
5/16 x 2-1/4"
5/16 x 2-3/4"
5/16 x 3-1/4"
5/16 x 3-3/4"
5/16 x 4"
5/16 x 5"
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
#3 phillips
1,500
2,000
1,500
1,000
1,000
500
500
1,500
1,000
500
500
500
250
21
32
30
24
28
16
17
47
38
22
26
27
17
Installation Tools
Cat. No.
Description
Qty.
Wt.
ELP100
Cat No.
includes:
ELY100
Drill Adapter
1
1
1
Set Screw
ELY220
ELY130
10
10
10
10
ELY210
ELY125
3/16"
3/16"
1/4"
1/4"
ELY140
ELY150
ELY160
ELY120
5/32 x 5 x 2
5/32 x 7 x 4
3/16 x 5 x 2
3/16 x 7 x 4
Drive Sleeve
Assembly
5/16" Hex Socket
1/4" Hex Drive
Socket for 1/4"
Anchor
1/4" Hex Socket
for 3/16" Anchor
#2 Phillips Bit
#3 Phillips Bit
Phillips Bit Holder
ELY110
ELT535-010
ELT555-010
ELT630-010
ELT650-010
For
Qty.
Anchor
Per
Description
Size
Shipper
also available:
8" Drive Sleeve
Assembly for 5"
ELY170
and 6" UltraCon
Anchors
Cat No.
ELT300-010
ELT310-010
ELT320-010
ELT405-010
ELT415-010
ELT425-010
ELT435-010
ELT445-010
ELT460-005
ELT465-005
ELT475-005
For
Anchor
Description
Size
5/32 x 3-1/2
5/32 x 4-1/2
5/32 x 5-1/2
3/16 x 3-1/2
3/16 x 4-1/2
3/16 x 5-1/2
3/16 x 6-1/2
3/16 x 7-1/2
1/4 x 4-1/2
1/4 x 5-1/2
1/4 x 7-1/2
3/16"
3/16"
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
5/16"
5/16"
5/16"
Qty.
Per
Tube
10
10
10
10
10
10
10
10
5
5
5
30
Depth of
Edge
Embed. Distance Pull-out
Shear
Concrete
2,730 PSI
Wood
Depth of
Edge
Embed. Distance Pull-out Shear
Depth of
Edge
Embed. Distance Pull-out Shear
1"
1"
3/16"
546
1-1/4"
2-1/2"
1"
1/4"
421
427
998
575
900
422
692
884
782
1-3/4"
1,096
856
1"
444
639
1-3/8"
1-3/8"
1"
750
866
1-3/4"
1,271
781
1"
668
632
1,166
1,070
1,857
919
1-3/8"
2-1/2"
1"
1-3/4"
1-1/4"
1"
2-1/2"
709
1,486
1-3/8"
2-1/2"
1-3/4"
Hollow Block
1,872 PSI
5/16"
1,049
708
1-1/4"
3-1/8"
1,149
1,153
1,583
1,908
1,780
Concrete
3,513 PSI
1"
1- 9/16"
809
1,507
1,454
1-3/4"
1-1/4"
Wood #2 SYP
Specific Gravity .55
737
879
1"
2,105
1,324
1-1/2"
1"
2-3/16"
836
1,500
2"
1-3/4"
2-3/16"
2,413
3,158
851
1,801
1"
3-1/8"
2,643
3,404
1-1/2"
3,347
2"
1"
1-3/4"
2"
1,423
5d
10d
1,095
2,471
1,617
2,912
2,367
1,454
1,188
2,472
1,677
3,233
2,407
NOTE: Indicated pull-out and shear failure values were obtained in tests witnessed by independent test labs (see below). These figures are
offered only as a guide and are not guaranteed in any way by Elco Construction Products.
* Testing by Hurricane
Concrete
Block
Wood
Engineering & Testing, Inc.
UltraCon Dia. Test report no.*
UltraCon Dia. Test report no.*
UltraCon Dia. Test report no.*
(HETI).
3/16"
HETI 03-1127
3/16"
HETI 05-1501
3/16"
Additional
testing has been
1/4"
HETI 03-1136
1/4"
HETI 03-1159
1/4"
Identification
Fastener
Dia.
all sizes
Head Style
hex washer,
flat hex flange,
oversized washer
Head Mark
Approvals
For 3/16", 1/4" and 5/16" UltraCon fasteners:
Miami-Dade, Florida Notice of Acceptance
(NOA) No. 11-0406.01
1/4"
TrimFit flat
5/16"
TrimFit flat
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
31
Packaged Anchors
Hex Washer Head
Catalog No.
EUH310-100
EUH315-100
EUH325-100
EUH335-100
EUH345-100
EUH355-100
EUH365-100
Phillips TrimFit Flat Head
Catalog No.
EUF310-100
EUF315-100
EUF325-100
EUF335-100
EUF345-100
EUF355-100
EUF365-100
Size
1/4 x 1-1/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
1/4 x 4"
Drive Size
5/16 hex washer
5/16 hex washer
5/16 hex washer
5/16 hex washer
5/16 hex washer
5/16 hex washer
5/16 hex washer
Size
1/4 x 1-1/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
1/4 x 4"
Drive Size
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
Size
1/4 x 1-1/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
1/4 x 4"
Drive Size
5/16 hex washer
5/16 hex washer
5/16 hex washer
5/16 hex washer
5/16 hex washer
5/16 hex washer
5/16 hex washer
Size
1/4 x 1-1/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
1/4 x 4"
Drive Size
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
#2 phillips
Bulk Anchors
Hex Washer Head
Catalog No.
EUH310
EUH315
EUH325
EUH335
EUH345
EUH355
EUH365
Phillips TrimFit Flat Head
Catalog No.
EUF310
EUF315
EUF325
EUF335
EUF345
EUF355
EUF365
3
2
Shipper Quantity
Shipper Weight
7/32 x 4-1/2"
7/32 x 4-1/2"
7/32 x 4-1/2"
7/32 x 4-1/2"
7/32 x 5-1/2"
7/32 x 5-1/2"
7/32 x 5-1/2"
7/32 x 7-1/2"
7/32 x 7-1/2"
500
500
500
500
500
500
500
100
100
9
11
14
16
21
22
23
6
7
7/32 x 4-1/2"
7/32 x 4-1/2"
7/32 x 4-1/2"
7/32 x 4-1/2"
7/32 x 5-1/2"
7/32 x 5-1/2"
7/32 x 5-1/2"
7/32 x 7-1/2"
7/32 x 7-1/2"
500
500
500
500
500
500
500
100
100
8
10
13
14
19
21
22
6
7
7/32 x 4-1/2"
7/32 x 4-1/2"
500
500
13
16
5/32 x 4-1/2"
5/32 x 4-1/2"
5/32 x 4-1/2"
5/32 x 4-1/2"
5/32 x 5-1/2"
500
500
500
500
500
4
6
7
9
10
7/32 x 4-1/2"
7/32 x 4-1/2"
7/32 x 4-1/2"
500
500
500
10
13
14
33
Description
EMC100
2-3/4"
EMC110
4"
EMC115
6"
EMC120
2-1/4"
EMC130
4"
EMC140
5"
EMC150
6"
** EMC140 and
EMC150 drill bits
are NOT shanked
Approvals/Listings:
Miami-Dade Product Control Approved: MiamiDade County, Florida, Notice of Acceptance (NOA) 12-0126.09
3/16"
Test Load
Test
2,732 PSI
Pull-Out
2,735 PSI
Shear
Pull-out
#14
3350 PSI
Shear
Edge Distance
2.5"
2.5"
2.5"
2.5"
Embedment
1
1-1/4
1-1/2
1-3/4
2
1.00"
1.75"
2.00"
1.75"
Ultimate Load
Lbs.
651
873
1,231
1,397
2,374
762
2505
2729
2591
Edge Distance
1.0"
2.5"
1.0"
2.5"
Embedment
1-1/4
1-1/4
1.25"
1.25"
1.25"
1.25"
Ultimate Load
Lbs.
839
1,425
780
1216
424
1324
Test Load
3/16"
2,676 PSI
#14
2070 PSI
Test
Pull-out
Shear
Pull-out
Shear
Inspection
In-place inspection can be made by identifying the special
CreteFlex head marking. This marking consists of an Elco logo
and a 4 as shown. The 3/16" diameter is indicated by 2 slots on
opposite sides of the drive.
Hex Washer
Head
1/4" Flat
Head
34
3/16" Flat
Head
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
Length
Features &Benefits
High in-place value over life of structure
High strength and ductility
Offers greater galvanic compatibility
in dissimilar metal applications
involving aluminum
Thread profile provides quick cutting
and stability during installation
Best choice for ACQ-treated lumber
Miami-Dade NOA No. 13-0924.02
Drive System
1-3/4"
5/16" hex
300
EML325-050
2-1/4"
5/16" hex
300
EML335-050
2-3/4"
5/16" hex
300
EML345-050
3-1/4"
5/16" hex
300
11
EML365-050
4"
5/16" hex
300
12
1-3/4"
#3 phillips
300
2-1/4"
#3 phillips
300
EMM330-050
2-3/4"
#3 phillips
300
EMM340-050
3-1/4"
#3 phillips
300
11
EMM360-050
4"
#3 phillips
300
12
NOTES: Installation tools available: see page 30. Use 3/16" masonry drill bit to install.
50 anchors per box, 6 boxes per shipper.
Approvals:
Identification
TrimFit
head
hex washer
head
300 series
stainless steel
head and shank
Head and shank made of 300 series (18-8) stainless steel alloy to
provide unmatched corrosion resistance in your toughest applications
Fused and hardened steel tapping threads make installation easy and
hold tight in block and poured concrete
Fused and
hardened steel
tapping threads
and gimlet point
3
5
1/4"
1.25"
2.50"
1.25"
2.50"
1.25"
2.50"
Anchor
Min.
Dia. Edge Dist.
1/4"
1.50"
3.00"
1.50"
3.00"
1.50"
3.00"
3.0"
1.5"
3.0"
1.5"
3.0"
1.5"
1.000"
1.000"
1.375"
1.375"
1.750"
1.750"
118
195
289
343
517
465
Min.
Spacing
Min.
Embed.
Allowable
Shear (lbs)
3.0"
1.5"
3.0"
1.5"
3.0"
1.5"
1.000"
1.000"
1.375"
1.375"
1.750"
1.750"
204
259
259
413
318
488
Min.
Embed.
Allowable
Tension (lbs)
3.0"
1.5"
3.0"
1.5"
3.0"
1.5"
1.000"
1.000"
1.375"
1.375"
1.750"
1.750"
248
263
389
251
295
319
Min.
Spacing
Min.
Embed.
Allowable
Shear (lbs)
3.0"
1.5"
3.0"
1.5"
3.0"
1.5"
1.000"
1.000"
1.375"
1.375"
1.750"
1.750"
255
226
319
511
306
515
1/4"
1.25"
2.50"
1.25"
2.50"
1.25"
2.50"
Anchor
Min.
Dia.
Edge Dist.
1/4"
1.50"
3.00"
1.50"
3.00"
1.50"
3.00"
36
Allowable
Tension (lbs)
1/4"
2.50"
3.0"
1.5"
200
2.50"
3.0"
1.75"
199
2.00"
4.00"
Anchor
Min.
Dia. Edge Dist.
1/4"
2.00"
4.00"
3.0"
3.0"
1.250"
1.250"
195
221
Min.
Spacing
Min.
Embed.
Allowable
Shear (lbs)
3.0"
3.0"
1.250"
1.250"
234
264
2.00"
4.00"
2.00"
4.00"
Anchor
Min.
Dia. Edge Dist.
1/4"
2.00"
4.00"
2.00"
4.00"
3.0"
1.5"
3.0"
1.5"
1.250"
1.250"
2.00"
2.00"
208
186
407
504
Min.
Spacing
Min.
Embed.
Allowable
Shear (lbs)
3.0"
1.5"
3.0"
1.5"
1.250"
1.250"
2.00"
2.00"
259
352
591
597
NOTES
5. Anchors approved under this product approval document
have not been tested for use under combined loading.
6. The concrete substrate into which these anchors will be
attached shall conform to ACI 301 specifications with strength
properties as specified herein.
7. The hollow and grout-filled concrete block substrate into
which these anchors will be attached shall be medium weight
or normal weight concrete block conforming to ASTM C-90.
8. Combination wood and concrete substrate shall consist of
1 x 4 nominal (3/4" thick) treated No. 2 Southern Yellow
Pine attached to concrete substrate conforming to ACI 301
specifications with strength properties as specified herein,
or 2 x 4 nominal (1-1/2" thick) treated No. 2 Southern Yellow
Pine attached to concrete substrate conforming to ACI 301
specifications with strength properties as specified herein.
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
Length
Thread Length
Drive Size
Box Quantity*
Box Weight
2-1/2"
2-1/4"
9/16" hex
3/8"
50
EMR235-050
3"
2-1/4"
9/16" hex
3/8"
50
EMR255-050
4"
3-1/2"
9/16" hex
3/8"
50
EMR265-025
5"
3-1/2"
9/16" hex
3/8"
25
EMR285-025
7-1/2"
3-1/2"
9/16" hex
3/8"
25
6
8
2-1/2"
2-1/4"
3/4" hex
7/16"
50
EMR340-050
EMR360-050
3"
2-1/4"
3/4" hex
7/16"
50
4"
3-1/2"
3/4" hex
7/16"
50
11
EMR370-025
5"
3-1/2"
3/4" hex
7/16"
25
EMR380-025
6"
3-1/2"
3/4" hex
7/16"
25
Inspection
The head marking consists
of an Elco logo and the
fastener length in inches.
fastener
length
Features
underhead
serrations
dual-lead
threads
Elco
logo
mark
higher hardness
zone for efficient
thread tapping
37
Edge Distance
1-7/8"
(5d)
3/8"
2-5/8"
3-3/4"
(10d)
2-1/2"
(5d)
1/2"
3-1/2"
4"
5"
(10d)
4,510 PSI
Embedment
Pull-out
Shear
1-1/2"
2"
2-1/2"
3-1/2"
1-1/2"
2"
2-1/2"
3-1/2"
1-1/2"
2"
2-1/2"
3-1/2"
1-3/4"
2"
3"
4"
1-3/4"
2"
3"
4"
1-3/4"
2"
3"
4"
1-3/4"
2"
3"
4"
1-3/4"
2"
3"
4"
1,364
2,995
3,226
5,379
x
x
3,620
6,070
1,232
3,296
3,936
6,493
x
x
x
x
2,266
2,706
4,666
7,058
x
x
5,483
8,656
x
x
x
x
2,090
2,875
6,042
8,732
x
x
1,534
2,170
x
x
2,459
3,902
4,766
5,658
6,419
7,047
x
x
x
x
x
x
4,549
6,960
x
x
5,739
8,028
x
x
x
x
6,081
7,167
9,148
9,631
38
Dia.
Edge Distance
Embedment
Pull-out
Shear
1-1/2"
2"
2-1/2"
3-1/2"
1-1/2"
2"
2-1/2"
3-1/2"
1-1/2"
2"
2-1/2"
3-1/2"
1-1/2"
2"
2-1/2"
3-1/2"
1-3/4"
2"
3"
4"
1-3/4"
2"
3"
4"
1-3/4"
2"
3"
4"
1-3/4"
2"
3"
4"
1-3/4"
2"
3"
4"
2,497
3,169
5,063
9,288
x
x
2,111
2,732
5,111
8,438
2,055
x
4,778
x
2,055
x
5,111
9,508
3,515
4,388
6,719
11,076
x
x
x
x
x
x
7,646
10,234
2,887
4,310
8,169
11,111
x
x
x
x
2,667
4,046
x
5,810
x
x
3,414
5,810
7,309
8,339
x
x
2,229
3,860
x
x
x
x
x
x
x
x
6,787
6,678
8,489
10,942
x
x
x
x
1-7/8"
(5d)
2-5/8"
3/8"
3-1/2"
3-3/4"
(10d)
2"
3"
(6d)
1/2"
3-1/2"
4"
5"
(10d)
Dimensional Properties
3/8" Diameter
1/2" Diameter
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
Steel
Thickness
Qty. per
Shipper*
.060 .250
.060 .125
.060 .250
.060 .250
.060 .250
.060 .250
.060 .250
.060 .250
.187 .500
.060 .500
26 ga. .187"
26 ga. .187"
26 ga. .187"
26 ga. .187"
300
300
300
300
300
300
300
300
300
300
150
150
150
150
17
15
17
15
17
17
18
21
17
30
4
7
7
7
.060 .250
.060 .125
.060 .250
.060 .250
.060 .250
.060 .250
.187 .500
.060 .500
.060 .250
300
300
300
300
300
300
300
300
300
17
15
15
16
16
17
16
18
16
N/A
4"
4"
4"
4"
4"
N/A
0.125"
0.125"
0.060"
0.125"
0.060"
N/A
N/A
4"
4"
4"
4"
4"
12 ga.
16 ga.
12 ga.
16 ga.
0.125"
4"
4"
N/A
2.5"
3.5"
4"
0.125"
0.060"
N/A
22 ga.
18 ga.
16 ga.
4"
4"
N/A
4"
4"
4"
0.125"
16 ga.
N/A
12 ga.
12 ga.
12 ga.
N/A
N/A
N/A
N/A
4"
0.060"
4"
16 ga.
4"
0.060"
4"
16 ga.
4"
0.060"
4"
16 ga.
39
Description
Rod Size
Quantity Per
Shipper*
Weight Per
Shipper
UL Pipe Size
FM Pipe Size
300
300
300
22
22
23
NA
4"
4"
NA
4"
4"
300
300
22
22
NA
3-1/2
NA
300
300
22
22
NA
NA
4"
300
300
22
22
NA
NA
4"
150
25
NA
NA
Simply install any 3/8" HangerMate anchor as required, then thread EZE270 adapter into it.
Weight Per
Shipper
UL
Pipe Size
FM
Pipe Size
20
20
NA
NA
20
NA
NA
40
Catalog No.
EZE215
EZE220
EZE240
EZE320
EZE340
EZE350
EZE360
EZE380
EZE290
Description
Drive Socket (for steel and wood applications)
Drive Sleeve (for concrete applications)
Drill Bit Adapter Kit
Collared 25/64 Drill Bit for installing HangerMate LG anchors
ANSI 1/4" Tanged Drill Bit for Hammer Drills
ANSI 1/4" SDS Drill Bit for Rotary Hammer Drills
7/32" Tanged Drill Bit for Hammer Drills installing HangerMate MP anchors
7/32" SDS Drill Bit for Rotary Hammer Drills installing HangerMate MP anchors
Setting Tool for EZG580/EZG590/EZG600/EZG610 components
Quantity
1
1
1
1
1
1
1
1
1
UL Pipe Size
4"
4"
4"
4"
4"
4"
4"
N/A
2.5"
3.5"
4"
4"
0.125"
4"
0.060"
4"
N/A
N/A
22 ga.
4"
18 ga.
4"
16 ga.
4"
FM Steel Thickness
UL Pipe Size
4"
4"
4"
FM Steel Thickness
16 ga.
16 ga.
16 ga.
12 ga.
16 ga.
12 ga.
16 ga.
0.125"
0.125"
16 ga.
N/A
12 ga.
12 ga.
12 ga.
Wood Applications
Vertical Mount End-Drilled Head
Rod Size
Elco Cat. No.
Description
3/8-16
EZG650
5/16X2-1/4
3/8-16
EZG670
5/16X3
Horizontal Mount Cross-Drilled Head
Rod Size
Elco Cat. No.
Description
3/8-16
EZH665
5/16X2-1/4
UL Pipe Size
4"
4"
FM Pipe Size
4"
4"
UL Pipe Size
3-1/2"
FM Pipe Size
UL Pipe Size
FM Pipe Size
4"
UL Pipe Size
FM Pipe Size
4"
Concrete Applications
Vertical Mount End-Drilled Head
Rod Size
Elco Cat. No.
Description
3/8-16
EZG730
5/16X2-1/4
Horizontal Mount Cross-Drilled Head
Rod Size
Elco Cat. No.
Description
3/8-16
EZH735
5/16X2-1/4
NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate
safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate
average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners
is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of
application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document.
For additional product information and technical assistance, please contact Elco directly at 1-800-435-7213.
41
RapidSet Tools
The fastest, easiest and most reliable way to install machine screw anchors
Efficient RapidSet tools eliminate clumsy
expensive, slow expander tools.*
Specifications
For machine screw anchor sizes #10,
1/4" and 3/8"
Designed for use with power tools,
including battery impact drivers
MAXX model allows placement of
1/4" anchors at various depths
(up to 2") below the surface
Catalog No.
#10-24
EZB800
1/4-20
EZB820
3/8-16
EZB810
1/4-20
Catalog No.
Description
Repair Kits
EZB811
EZB801
* Note: RapidSet tools draw the anchors internal insert up into the anchors outer sleeve; this installation process
eliminates the need to maintain a back bearing surface (required by hammer setting tools).
42
Proud
Member of:
January 2014
2014 Elco Construction Products
Rev. 01/14
Elco, Aggregator , Alumi-Flex, BiFlex, Crete-Flex, ConFlex, Dril-Flex, Drilltite, Fab-Lok, Flex Technology , Flo-Seal, HangerMate, Stalgard,
Tapfast, Tap-Flex, Topseal, TrimFit, UltraCon and Infastech are trademarks of ElcoConstruction Products. Avdel is a registered trademark of
Avdel UK Ltd. AllFlex is a trademark of Alloy Fasteners, Inc. Dewalt is a registered trademark of The Black & Decker Corporation.
Scrubolt is a trademark of Butler Manufacturing Company. Pantone is a registered trademark of Pantone, Inc.