Escolar Documentos
Profissional Documentos
Cultura Documentos
Project Title: Analysis of Jacketed Reinforced Concrete Column Subjected to Uni-Axial Load
& Bi-Axial Load
.Abstract
Jacketing of reinforced concrete column is to target the improvement of local vulnerabilities in columns related to
inadequate strength (compressive & Flexural) or poor ductility. Theoretical analysis have been carried out in the
present study for different column sections of jacket thickness of 50 mm and 100mm and 150 mm for jacketed RC
columns subjected to uni-axial compressive loading.
The uni-axial load carrying capacity along the major axes has been carried out under balanced section condition.
Nonlinear finite element analysis has been carried out for the jacketed RC columns to compare the confined
concrete strength (fcc) of finite element analysis with that of theoretical analysis, to plot the variation of stresses at
the central core concrete and at the interface of old and new concrete. Considerations have been given for
variations in the properties of different types concretes used in the jacket and the original column.
In order to find out the increase in the confined capacity of jacketed columns due to strengthening with respect to
original column, theoretical analysis has been carried out.
The biaxial load is computed by using Breslers reciprocal load equation. The concentric load carrying capacities
have been carried out based on the sheikh and Uzumeris confined concrete model. The uni-axial load carrying
capacity along both the axes (major and minor) has been carried out under balanced section condition. ANSYS is
used for the FEA analysis.
Project Intent:
1. Understand the concept of R.C.C & FRP jacketed on RC.C.
2. Simulate FEA of R.C.C jacketed with FRP and evaluate the stress.
3. Analysis of for uni-axial & Bi-axial loading condition
Scope of project:
The Scope of Work is as detailed below,
1. Problem study & input data finalization
1. Concept study of R.C.C Jacketed with FRP subjected to uni-axial & Bi-axial loading condition.
2. Comparative study of R.C.C with different thickness.
3. 3d model generation of the sample model using ANSYS
4. FEM Analysis:
a. Static Structural Analysis
5. Project documentation with plots/sketches & result study observation
Input Details:
The Input Details provides are,
Methodology
conditions.
Obtaining the result and plotting in ANSYS postprocessor