Escolar Documentos
Profissional Documentos
Cultura Documentos
INSTALLATION GUIDE
Please read this installation guide before installing the USB driver.
This installation guide describes how to install the USB driver included in the Icom products CD. If you download the USB
driver from the Icom Download Service, specify the folder to store the driver.
NOTE: The descriptions in this guide are based on Windows 8 and Windows 7.
For Windows Vista and Windows XP:
Refer to the Windows 7 instructions because the operations for Windows Vista and Windows XP are
similar to Windows 7.
TABLE OF CONTENTS
1. OVERVIEW............................................................. 1
3. DRIVER INSTALLATION.................................... 36
2. PRECAUTIONS...................................................... 2
Before installation............................................... 2
Before connecting to a PC.................................. 2
Important............................................................. 2
After installation.................................................. 2
About compatible products................................. 2
1. OVERVIEW
System requirements
To install the driver, the following hardware and software are required:
PC
M
icrosoft Windows 8 (32/64 bit)*,
Microsoft Windows 7 (32/64 bit),
Microsoft Windows Vista (32/64 bit) or
Microsoft Windows XP (32 bit) OS
Cable
A USB cable
Type A
or
Mini-B
Type B
NOTE:
Depending on the length of a 3rd party USB cable,
the transceiver may not operate properly even if it
is recognized by the PC. Use as short a cable as
possible.
Depending on the transceiver, the USB port shape
may differ. If you use a 3rd party USB cable, be
sure to check the port shape, before purchasing
the cable.
This guide is based on using a transceiver with a
Mini-B type USB port.
NOTE:
Icom is not responsible for problems using a PC
with one of the above OSs installed.
The USB driver cannot be used with the 64 bit
version of Microsoft Windows XP.
In this installation guide, the above OSs are described as Windows 8, Windows 7, Windows
Vista and Windows XP.
2. PRECAUTIONS
Before installation
When installing the driver, log on as the administrator.
Make sure no other applications are running.
When a previous version driver is installed on your
PC, the driver name Silicon Laboratories CP210x
USB to UART Bridge (Driver Removal) is displayed
on the Control Panel screen, as shown below. In this
case, uninstall it before installing this driver.
See Uninstalling the driver on page 9 for details.
After installation
Uninstalling the USB driver
You cannot uninstall the USB driver for each individual unit. After uninstalling the USB driver, none of the
transceivers that require this driver can be operated
with the PC.
When another transceiver is connected
The COM port number is automatically added after
turning ON the transceivers power.
About compatible products
The products that require this driver are shown on the
Icom website (http://www.icom.co.jp/world/index.html).
Before connecting to a PC
The USB driver is not supported by the automatic
recognition system, so NEVER connect the USB cable
between the transceiver and the PC until AFTER the
USB driver has been installed.
See Driver installation on page 3 for details.
Once the driver is installed, a PC software can be
used by just connecting the USB cable.
Important
Depending on your PC performance (OS, environment, and so on), the USB audio may be interrupted,
or a control by the PC software may get delayed.
If the CPU has a heavy load, the USB audio is easily
interrupted.
The settings of the installed audio player may be
changed after connecting the transceiver to the PC.
Icom is not responsible for improper operation when
connecting the transceiver and the PC through a
USB hub.
3. DRIVER INSTALLATION
Windows 8
NOTE:
NEVER connect the USB cable between the transceiver and the PC until AFTER the USB driver has been
installed.
This USB driver is not supported by the automatic recognition system.
The displayed dialogue boxes, indications or operations may differ slightly from the following instructions, depending on your system version and settings.
If you want to install to the 32 bit version OS, doubleclick CP210xVCPInstaller_x86.exe.
If you want to install to the 64 bit version OS, doubleclick CP210xVCPInstaller_x64.exe.
Click
Double-click
r When the User Account Control dialogue box appears, click [Yes].
q Click
w Click
Click
3. DRIVER INSTALLATION
Windows 8 (Continued)
After the driver installation has been completed, confirm the port connection and port number.
Click
q Right-click
Double-click
PC
To a USB port
3. DRIVER INSTALLATION
Windows 7
NOTE:
NEVER connect the USB cable between the transceiver and the PC until AFTER the USB driver has been
installed.
This USB driver is not supported by the automatic recognition system.
The displayed dialogue boxes, indications or operations may differ slightly from the following instructions, depending on your system version and settings.
If you want to install to the 32 bit version OS, doubleclick CP210xVCPInstaller_x86.exe.
If you want to install to the 64 bit version OS, doubleclick CP210xVCPInstaller_x64.exe.
Click
r When the User Account Control dialogue box appears, click [Yes].
q Click
w Click
Click
3. DRIVER INSTALLATION
Windows 7 (Continued)
Depending on your system version and settings,
you may be prompted to restart the PC. In this
case, follow the instructions on screen.
After the driver installation has been completed, confirm the port connection and port number.
!2 Click the Windows START icon.
!3 Right-click Computer in the <Start> menu, and
then click Properties.
w Right-click
Click
e Click
Double-click
PC
To a USB port
Windows 8
q Click the folder icon on the taskbar.
Click
q Click
w Click
q Right-click
w Click
w Click
Click
q Select
q Right-click
w Click
Click
Windows 7
t Click the [Port Settings] tab, then click [Advanced...].
q Click
e Click
w Click
q Click
w Click
Click
q Select
q Right-click
Click
w Click
Windows 8
r Click the Control Panel.
q Start Windows.
w Point the mouse pointer around the right-bottom
corner of the desktop.
Charms appear
Click
y Double-click Windows Driver Package - Silicon Laboratories (silabenm) Ports (12/10/2012 6.6.1.0).
When User Account Control dialogue box appears, click [Continue].
Click
Double-click
Windows 7
q Start Windows.
w Select the Control Panel in the Start menu.
Click
r Double-click Windows Driver Package - Silicon Laboratories (silabenm) Ports (12/10/2012 6.6.1.0).
When User Account Control dialogue box appears, click [Continue].
Double-click
10