Escolar Documentos
Profissional Documentos
Cultura Documentos
Code
function
*3370#
OR #3370#
This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses
the best sound quality but talk time is reduced my approx. 5%. Type again to deactivate
Enhanced Full Rate Codec (EFR)
Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain
approx 30% more Talk Time. Type again to deactivate the Half Rate Codec
*#4720#
*#0000#
*#0001#
*#0837#
*#9125#
*#9999#
*#06#
#pw+1234567890+1#
#pw+1234567890+2#
#pw+1234567890+3#
#pw+1234567890+4#
*#147#
*#1471#
*#21#
*#2640#
*#30#
*#43#
*#61#
*#62#
*#67#
*#67705646#
*#73#
*#746025625#
*#7760#
*#7780#
*#8110#
*#92702689#
Displays your phones software version, 1st Line : Software Version, 2nd Line : Software
Release Date, 3rd Line : Compression Type
Displays the serial parament
Displays software version instructions
Displays smiley while charging
Phones software version if *#0000# does not work. *#682371158412125# on newer
phones
*#94870345123456789
Deactivate the PWM-Mem
#
**21*number#
Turn on "All Calls" diverting to the phone number entered
**61*number#
Turn on "No Reply" diverting to the phone number entered
**67*number#
Turn on "On Busy" diverting to the phone number entered
12345
This is the default security code
press and hold #
Lets you switch between lines
*#war0anty#
This will show you the waranty details for your mobile ( made, serviced, etc )
*#sim0clock#
This shows if your phone will allow simclock stoppage.
*3001#12345#
Enables field test mode and many other options.
This code is able to check, activate or remove SIM card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.
#pw+1234567890+1#
#pw+1234567890+2#
#pw+1234567890+3#
#pw+1234567890+4#
for
for
for
for
Provider-Lock status
Network-Lock status
Country-Lock status
SimCard-Lock status
# = DOUBLE-CROSS
W = PRESS "*" THREE TIMES
P = PRESS "*" FOUR TIMES
+ = PRESS "*" TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4
[Master Code] is a 10 digit code, based on the phones IMEI number.
Eg. To remove restriction on Lock 1 type following code:
#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eg. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#
NOTE : These codes could be used with care. A user told me that it's only possible to type in about 3 different
codes on each lock! Then something bad will happen ..therefore be careful!