Escolar Documentos
Profissional Documentos
Cultura Documentos
DB
JF
STRUCTURAL
6.1
General Provisions
CONTRACTOR shall perform to COMPANY approval the detail design, procurement,
supply and construction of foundations and superstructure for the following structures:
JAF
6.0
6.2
10-01402
8/7/15
10-01402
JO/EWO
00A
02-14
DATE
REV
NO.
DISCIPLINE
ENGINEER
DB
American Society of Civil Engineers, Minimum Design Loads for Buildings and
other Structures (ASCE 7-05)
STCOI015
8/7/15
DATE:
PROJECT
ENGINEER
JF
8/7/15
DATE:
CERTIFIED
DB
DATE:
8/7/15
CONSTRUCTION
AGENCY
DATE:
OPERATIONS
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
DESCRIPTION
ENGG CERT
PMT OPRNS
Structural Calculations
6.2.1 Codes and Standards shall be based on the March 2014 issue date, unless
otherwise instructed by COMPANY Representative.
6.3
Design Loads
CONTRACTOR shall design structures for the design loads shown, but not limited to the
following:
10-01402
6.3.1
8/7/15
Occupancy
00A
REV
NO.
02-14
DATE
10-01402
JO/EWO
DISCIPLINE
ENGINEER
DB
8/7/15
DATE:
PROJECT
ENGINEER
JF
Laboratories
625
Toilet Rooms
320
325*
File Rooms
6251
Meeting Room
500
Computer Rooms
6251
500*
400*
Lobbies
500*
Light Storage
600*
Mechanical Rooms
7501
Electrical Rooms
6251
Telephone Rooms
7501
Loading Dock
1500
8/7/15
DATE:
CERTIFIED
DB
DATE:
8/7/15
CONSTRUCTION
AGENCY
DATE:
OPERATIONS
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
JF
JAF
DB
DKB
DESCRIPTION
ENGG CERT
PMT OPRNS
500*
Design Live Load (Kg/m2)
DB
DKB
Occupancy
Roof
JF
150
Fork Lift
6.3.2
Snow Loads: Snow load (including snow drifting) shall be calculated per the Code.
0 Kg/m2
10-01402
For Code mandated live loads of 500 Kg/m2 or less and for live loads identified in
this SOC that are not minimums mandated by Code, the design live load for
members having support area of 37.16 square meters or more may be reduced in
accordance with the Code.
No reduction shall be taken for live loadings on roofs.
8/7/15
6.3.4
Stair Treads:
00A
REV
NO.
02-14
DATE
10-01402
JO/EWO
DESCRIPTION
15,000 kg
DISCIPLINE
ENGINEER
DB
6.3.5
8/7/15
DATE:
PROJECT
ENGINEER
25 Kg/m2
Drywall:
50 Kg/m2
JF
8/7/15
DATE:
CERTIFIED
DB
DATE:
8/7/15
CONSTRUCTION
AGENCY
6.3.6
DATE:
100 Kg/m2
150 Kg/m2
Tunnel:
25 Kg/m2
50 Kg/m2
OPERATIONS
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
In addition to the above uniform load allowance, for piping 300 mm in diameter and
greater, and for concrete encased high voltage conduit, the routing shall be
specifically identified and the support points and anticipated loads shown.
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
JAF
ENGG CERT
PMT OPRNS
DKB
DB
JF
6.3.7
In offices and other areas where subdividing partitions are to be used and the
design live load is 400 Kg/m2 or less, a partition load of 75 Kg/m2 shall be used to
allow for random placement of demising drywall partitions.
Interior masonry partition loads shall be calculated for the specific weight and
location of the partition based on the unit weight of the masonry used.
6.3.8
DESCRIPTION
Partitions
6.3.9
500 Kg/m2
Curtain Wall
100 Kg/m2
10-01402
8/7/15
00A
REV
NO.
02-14
DATE
10-01402
JO/EWO
DISCIPLINE
ENGINEER
DB
Exposure Category: C.
6.3.11 Seismic Loads: Seismic load will be calculated per the Code.
8/7/15
DATE:
PROJECT
ENGINEER
JF
1.0
8/7/15
DATE:
CERTIFIED
0.082
0.028
DB
DATE:
8/7/15
CONSTRUCTION
AGENCY
Site Class
DATE:
OPERATIONS
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
JAF
ENGG CERT
PMT OPRNS
DKB
DB
JF
10-01402
00A
DISCIPLINE
ENGINEER
DB
0.24 kN/m2
0.48 kN/m2
Surrounding atriums
0.48 kN/m2
100 percent
100 percent
20 percent
Reciprocating machinery
50 percent
Hangers
33 percent
8/7/15
DATE:
PROJECT
ENGINEER
JF
8/7/15
DATE:
Typical partitions
8/7/15
10-01402
JO/EWO
02-14
DATE
REV
NO.
Interior walls and partitions, where the loading is not controlled by seismic
conditions, will be designed for the following minimum lateral loads in order to
provide appropriate safety and stiffness. The following loads are from IBC 1607.13
and design recommendations:
JAF
CERTIFIED
DB
DATE:
8/7/15
CONSTRUCTION
AGENCY
Concentrated load
Uniform load
Infill load
DATE:
OPERATIONS
DATE:
BY:
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
mm square.
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
DESCRIPTION
ENGG CERT
PMT OPRNS
6.3.15 Deflection
Framing Element
Loading
Control Criteria
Live Load
Span/360
Superimposed Load
Span/480
Superimposed Load
Span/600
Live Load
Span/240
Live Load
Span/150
Live Load
Span/1666
JF
JAF
DB
DKB
Structural elements shall be designed within the deflection control limits below:
Member
10-01402
10-01402
JO/EWO
Elevator Supports
8/7/15
00A
REV
NO.
02-14
DATE
The move-in flatness and levelness of the floors shall satisfy overall floor flatness
Ff of 25 and the levelness FL of 20 when measured in accordance with ASTM
E1155.
DISCIPLINE
ENGINEER
DB
8/7/15
DATE:
PROJECT
ENGINEER
6.3.17 Vibration
The structure shall be configured and designed to control vibrations to within the
following parameters:
JF
8/7/15
DATE:
CERTIFIED
DB
DATE:
Walking Footfall: The floor framing shall be designed within the following
footfall induced vibration control parameters.
8/7/15
CONSTRUCTION
AGENCY
DATE:
OPERATIONS
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
DESCRIPTION
ENGG CERT
PMT OPRNS
DKB
DB
JAF
JF
Occupancy
Walking Speed
Maximum Vibration
Velocity
Laboratories
50 paces/min.
50.8x10-3 mm/sec.
Laboratories
75 paces/min.
50.8x10-3 mm/sec.
100 paces/min.
203x10-3 mm/sec.
75 paces/min.
406x10-3 mm/sec.
100 paces/min.
406x10-3 mm/sec.
100 paces/min.
813x10-3 mm/sec.
10-01402
Corridors
8/7/15
6.3.18 Drift
The inter-story (between any two (2) floors) and total drift of the structural frame
shall be designed within the drift control limits of height/400. Drift shall also be
controlled within detailing limits of building expansion joints. Drift for seismic and
wind shall be checked for conformance with code limits and against limitations of
selected faade systems. Drift for Pre-Engineered Metal Buildings shall not exceed
allowable drift specified in Metal Building Systems Manual.
00A
REV
NO.
02-14
DATE
10-01402
JO/EWO
DISCIPLINE
ENGINEER
DB
8/7/15
DATE:
PROJECT
ENGINEER
6.3.19 Durability/Maintenance
JF
8/7/15
DATE:
Steel members exposed to the exterior shall be either galvanized or painted for
protection against environmental corrosive effects.
Concrete mix design for foundations shall be designed for Exposure II using
Type V cement according to SAUDI ARAMCO Standard SAES-Q-001 (15 May
2010).
Fusion bonded epoxy coated rebar shall be used for foundations, basement
walls, retaining walls, slabs-on-grade and below grade concrete structures.
CERTIFIED
DB
DATE:
8/7/15
CONSTRUCTION
AGENCY
DATE:
OPERATIONS
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
DESCRIPTION
ENGG CERT
PMT OPRNS
DKB
DB
JF
6.4
10-01402
8/7/15
10-01402
6.4.1
6.4.2
Sustainability
6.5.1
CONTRACTOR shall provide product data, certification letter, and costs for
material with recycled content.
6.5.2
CONTRACTOR shall provide product data and costs for material within 800 Km of
Project Site.
6.5.3
6.5.4
Concrete Aggregate: Recycled content shall comply with Codes and Standards in
the Section 6.2.
6.5.5
Fly Ash: Shall comply with Codes and Standards in Section above. Provide a
maximum of 25 percent fly ash.
6.5.6
Ground Granulated Blast Furnace Slag: Shall comply with Codes and Standards in
the Section above. Provide a maximum of 50 percent slag.
6.5.7
Concrete Reinforcing Bars: Recycled content shall comply with Codes and
Standards in the Section 6.2.
6.5.8
Structural Steel, Metal Deck and Steel Stud Shear Connectors: Recycled content
shall comply with Codes and Standards in the Section 6.2.
00A
JO/EWO
02-14
A
REV
NO.
DATE
DESCRIPTION
6.5
Calculations
DISCIPLINE
ENGINEER
DB
8/7/15
DATE:
PROJECT
ENGINEER
6.6
Structural Deliverables
JF
8/7/15
DATE:
6.6.1
CERTIFIED
DB
DATE:
8/7/15
CONSTRUCTION
AGENCY
DATE:
Calculations of structural concrete and steel framing for all structural systems.
Foundation Drawings.
Materials list.
OPERATIONS
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
JAF
ENGG CERT
PMT OPRNS
DKB
DB
JF
6.6.2
10-01402
8/7/15
10-01402
6.7.2
CONTRACTOR scope shall include, as a minimum, but not limited to the following:
00A
JO/EWO
02-14
A
REV
NO.
DATE
DESCRIPTION
6.7
All foundations shown on the structural drawings are preliminary, and based on
a preliminary allowable soil bearing pressure of 300 KPa. CONTRACTOR
shall provide Geotechnical Engineer with specific foundation design loads for
each individual spread footing, combined footing and continuous footing.
Geotechnical Engineer will analyze the soils based on the given loading and
advise CONTRACTOR on the required foundation footprint. CONTRACTOR
shall comply with Geotechnical Engineers recommendations and design and
construct foundations according to the referenced codes and standards.
DISCIPLINE
ENGINEER
DB
8/7/15
DATE:
PROJECT
ENGINEER
JF
8/7/15
DATE:
CERTIFIED
6.8
DB
DATE:
8/7/15
CONTRACTOR shall provide ground floor system as shown on the Drawings and
indicated in this Scope of Work.
6.8.2
CONTRACTOR scope shall include as a minimum, but not limited to the following:
CONSTRUCTION
AGENCY
DATE:
Specifications for earthwork, concrete and steel structures and all their
components.
OPERATIONS
CONTRACTOR shall design and construct slab on grade for the required loads
according to the referenced design criteria, codes and standards. Slab-ongrade shall be constructed on a vapor retarder and porous fill on compacted
subgrade as required in the Geotechnical Report.
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
JAF
ENGG CERT
PMT OPRNS
DKB
DB
JF
10-01402
8/7/15
00A
DESCRIPTION
10-01402
A
REV
NO.
DATE
JO/EWO
JAF
6.9
DISCIPLINE
ENGINEER
DB
8/7/15
DATE:
PROJECT
ENGINEER
6.9.2
CONTRACTOR shall provide roof and floor framing systems consisting of one
way and two way reinforced concrete slabs supported by reinforced concrete
beams and columns. Rooftop structures used for elevator over-runs, elevator
machine rooms and roof access shall be provided using this same structural
system. Loading dock canopy roof structures shall consist of galvanized metal
roof deck supported by structural steel beams and posts.
CONTRACTOR shall provide shear walls in the basement to resist lateral loads
resulting from lateral earth pressure against the basement walls. Shear walls
shall extend from the ground floor to the first floor. Reinforce openings in shear
walls.
CONTRACTOR shall provide vertical and horizontal structure for support of the
building penthouse and screen wall cladding systems. This structure shall
consist of steel wind posts, girts and diagonal braces. Posts and diagonal
braces shall be anchored to the concrete penthouses and roofs. Provide steel
structure for support of louvers, windows and doors.
CONTRACTOR shall provide steel structure for elevator hoist beams, divider
beams, guide rails supports and counter weight supports.
CONTRACTOR shall provide steel structure for support of top running bridge
cranes and trolley hoists.
JF
8/7/15
DATE:
CERTIFIED
DB
DATE:
8/7/15
CONSTRUCTION
AGENCY
DATE:
OPERATIONS
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
02-14
ENGG CERT
PMT OPRNS
CONTRACTOR shall provide concrete wearing slab over the fire pump room.
6.11
10-01402
8/7/15
00A
8/7/15
DATE:
PROJECT
ENGINEER
JF
6.11.2 CONTRACTOR scope shall include as a minimum, but not limited to the following:
8/7/15
DATE:
Connecting Tunnel
CERTIFIED
DB
CONTRACTOR shall provide structure for shared cylinder area, service yard
screen wall, smoking shelter and shaded parking structures consisting of
structural steel beams, columns and reinforced concrete footings as shown on
Architectural Drawings.
8/7/15
CONSTRUCTION
AGENCY
DATE:
OPERATIONS
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
JO/EWO
CONTRACTOR shall provide walls for blast resistant rooms as shown on the
Architectural Drawings. Floor structure shall also resist blast loads.
6.10.2 CONTRACTOR scope shall include, as a minimum, but not limited to the following:
02-14
DATE
REV
NO.
JF
JAF
6.10
DISCIPLINE
ENGINEER
DB
DATE:
DB
DKB
DESCRIPTION
ENGG CERT
PMT OPRNS
6.12
Structural Materials
DB
DKB
10-01402
10-01402
02-14
8/7/15
JO/EWO
DATE
DESCRIPTION
Element
Strength (MPa)
Unit Weight
(Kg/m3)
Site Work
31
0.40
2320
Foundation Work
28
0.40
2320
Slab-On-Grade
28
0.40
2320
Structural
Slabs/Beams
28
0.40
2320
Columns
28
0.40
2320
28
0.40
2320
Architectural Fills
28
0.40
2320
00A
REV
NO.
8/7/15
DATE:
PROJECT
ENGINEER
JF
8/7/15
DATE:
CERTIFIED
DB
DATE:
8/7/15
CONSTRUCTION
AGENCY
Element/Shape
Standard/Grade
WF Shapes
ASTM A 992M
ASTM A 36MM
Structural Pipe
ASTM A 36M
DATE:
OPERATIONS
BY:
DATE:
(DCC) NO. _____________________
APPROVAL/CERTIFICATION REQUIREMENTS,
REVISION
REVISIONCERTIFICATION
CERTIFICATE
EDSD
VERIFICATION
CONTROL NUMBER
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
00A
10-01402
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
JAF
ENGG CERT
PMT OPRNS
REVISION
REVISIONCERTIFICATION
CERTIFICATE
00A
REV
NO.
8/7/15
02-14
DATE
10-01402
10-01402
JO/EWO
DESCRIPTION
JF
JAF
DB
DKB
ENGG CERT
PMT OPRNS
DHAHRAN
DISCIPLINE
ENGINEER
DB
8/7/15
DATE:
PROJECT
ENGINEER
JF
CERTIFIED
8/7/15
DB
CONSTRUCTION
AGENCY
8/7/15
DATE:
OPERATIONS
DATE:
SCOPE OF WORK
EXPEC ADVANCED RESEARCH CENTER EXPANSION
DOC
SAUDI ARABIA
502
JO / EWO:
DRAWING NO.
HE-348820
SHT.NO.
REV.NO.
10-01402
00A
EDSD/2616-0399.doc
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
DATE:
BY:
CONTROL NUMBER
DATE:
APPROVAL/CERTIFICATION REQUIREMENTS,
EDSD
VERIFICATION
DATE: