Escolar Documentos
Profissional Documentos
Cultura Documentos
DATA SHEET
General
Chemical Description
Processing
Filament Winding
RTM
Pressure Molding
Wet Lay-up
Advantages
Ease of mixing
Complete impregnation of fibers
Room or elevated temperature curing
Excellent mechanical properties
Typical Properties*
clear liquid
2
6.6 - 6.8
146 - 150
1000 - 1500
1.16 - 1.17 (9.7 - 9.8)
>140 (>284)
clear liquid
4
40 - 60
0.93 - 0.95 (7.8 - 7.9)
>93 (>200)
* Typical properties are based on Huntsmans test methods. Copies are available upon request.
Mix Ratios
Curing
Processing
to 3000 cPs
90 110 min
50 60 min
18 22 min
Cure:
2 days 25C
8 days 25C
4 months 23C
1 day 23 C + 10 h 40 C
1 day 23 C + 20 h 40 C
1 day 23 C + 10 h 50 C
1 day 23 C + 15 h 50 C
1 day 23 C + 10 h 60 C
1 day 23 C + 15 h 60 C
1 day 23 C + 2 h 80 C
1 day 23 C + 8 h 80 C
1 day 23 C + 1 h 90 C
1 day 23 C + 4 h 90 C
1 day 23 C + 1 h 100 C
1 day 23 C + 4 h 100 C
4 months 23 C + 4 h 130 C
Cured Properties
Tg(C)
52 - 55
62 - 66
67 - 61
70 - 76
74 - 80
80 - 85
82 - 88
94 - 104
96 - 106
108 - 114
114 - 122
108 - 118
116 - 126
118 - 130
120 - 134
120 - 132
7 d/RT
15 h/50C
64C
8.7
2.0
500
85C
12.2
3.4
515
118C
12.3
5.8
450
18.4
430
6.1
17.4
400
6.8
Water Absorption
Immersion:
Cure:
4days H2O@ 23C (%)
10days H2O @ 23C (%)
30min H2O @ 100C (%)
60min H2O @ 100C (%)
Mean Value:
Cure:
from 20-50 C (10-6/K)
from 20-90 C (10-6/K)
from 20-120 C (10-6/K)
Poisonss Ratio
730 45
1.15 0.05
7 d/RT
0.45-0.50
0.70-0.80
0.55-0.60
0.70-0.80
8 h/80C
0.40-0.45
0.65-0.70
0.45-0.50
0.60-0.70
7 d/RT 15 h/50C
97
71
-
8 h/80C
71
0.35
Laminate Properties
Tensile / Flexural
Samples: 16 layers (4 mm) E-glass fabric 1:1, 280-300 g/m3
Fiber volume content: 45 - 46%
Cure: 10 hours / 80C
Unconditioned
Flexural Strength (kpsi)
Flexural Modulus (kpsi)
Flexural Elongation (%)
Tensile Strength (kpsi)
Tensile Modulus (kpsi)
Tensile Elongation (%)
63.6 71.1
2930 2990
2.7 3.0
52.2 56.6
4800 5670
1.6 1.9
55.1 58.0
2.4 2.7
2855 2915
7 days / RT
8 hrs / 80C
8265 - 8845
8700 - 9425
8400 - 9000
Handling/Safety
Precautions
First Aid
In case of contact:
Eyes: Promptly flush with large amounts of water. Get immediate
medical attention.
Skin: Wash with mild soap and water. Get immediate medical
attention.
Inhalation: Remove to fresh air. Give oxygen if breathing is difficult.
Ingestion: If swallowed, immediately give at least 3 - 4 glasses of
water, but do not induce vomiting. If vomiting occurs, give fluids again.
Do not give anything by mouth to an unconscious or convulsing person.
Get immediate medical attention. Have a physician determine whether
vomiting or stomach evacuation is necessary.
Important
The following shall supersede any provision in Buyers forms, letters and
papers. THERE IS NO WARRANTY OR CONDITION, WHETHER
EXPRESS OR IMPLIED BY ANY STATUTE OR OTHERWISE,
INCLUDING WARRANTIES AND CONDITIONS OF
MERCHANTIBILITY OR OF FITNESS FOR A PARTICULAR
PURPOSE, FOR THE PRODUCT OR PRODUCTS REFERRED TO
HEREIN. TECHNICAL ADVICE FURNISHED BY THE SELLER
SHALL NOT CONSTITUTE A WARRANTY OR CONDITION,
STATUTORY OR OTHERWISE, WHICH IS EXPRESSLY
DISCLAIMED, ALL SUCH ADVICE BEING GIVEN AND ACCEPTED
AT BUYERS RISK. While the information contained herein is believed
to be accurate, Seller makes no representations as to the reliability of
the results or as to the results of Buyer or as inducements to infringe any
relevant patent, now or hereafter in existence. Testing for intended use
is the sole responsibility of Buyer. The product(s) has not been tested
for, and is therefore not recommended for, uses for which prolonged
contact with mucous membranes, abraded skin, or blood is intended, or
for uses for which implantation within the human body is intended.
UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR
INCIDENTAL, CONSEQUENTAL OR OTHER DAMAGES FROM
ALLEGED NEGLIGENCE, BREACH OF WARRANTY OR
CONDITION, STRICT LIABILITY OR ANY OTHER LEGAL THEORY,
ARISING OUT OF MANUFACTURE, SALE, USE OR HANDLING OF
THE PRODUCT OR PRODUCTS REFERRED TO HEREIN. The sole
remedy of Buyer and the sole liability of Seller for any claims shall be
limited to Buyers purchase price of the product(s) which is the subject of
the claim or the amount actually paid for such product(s), whichever is
less.
Note
Araldite LY 5052-1/
Aradur 5052-1
March, 2004