Escolar Documentos
Profissional Documentos
Cultura Documentos
MEASURING INSTRUMENTS
www.klass-messzeuge.ro
>
With this new edition of our catalogue, older copies lose validity.
>
We reserve the right to revise prices and designs as necessary, without notice
>
>
>
>
www.klass-messzeuge.ro
Features:
SHR-150M adopts mechanical test cycle without any need of electricity, load force 60,100,150Kg is selected by dial knob, test force
is manually loaded in handle, and tested result: HRA,HRB,HRC is showed on the analogue gauge.
SHR-150E adopts the design of load test force in electric, load force 60,100,150Kg is selected by dial knob, test force is loaded in
switch control, and tested result: HRA,HRB,HRC is showed on the analogue gauge.
SHR-150C adopts the design of load test force in electric, except to lift up the anvil and chose the test force, other operations are
entirely automatic. The test force, dwell time, load and unload process, and test results are displayed on LCD screen, which avoid
the man-made error and enhance the measuring accuracy, meanwhile, built-in processor and
Specifications:
Model
SHR-150M (D)
Rockwell Scales
SHR-150E (D)
SHR-150C (D)
HRA(2088), HRB(20100)HRC(2070)
10Kgf(98.07N)
Hardness Indication
Analogue
Analogue
Hardness Resolution
0.5HR
0.5HR
Without
Without
HRA,HRB,HRC,HV,HK,HBW
Dwell Time
Manual
Manual
Electronic
Electronic
Man-made Reading
Need
Need
No Need
Printer
Without
Without
With
PC Connecting
Without
Without
RS232
Power supply
Without
AC220V50Hz, 110V60Hz
AC220V50Hz, 110V60Hz
170mm
Instrument Throat
140mm
Dimension(LWH)
520240700mm
120Kg100Kg
Accuracy
www.klass-messzeuge.ro
1.1
Features:
SHR-150M adopts mechanical test cycle without any need of electricity, load force 60,100,150Kg is selected by dial knob, test force
is manually loaded in handle, and tested result: HRA,HRB,HRC is showed on the analogue gauge.
SHR-150E adopts the design of load test force in electric, load force 60,100,150Kg is selected by dial knob, test force is loaded in
switch control, and tested result: HRA,HRB,HRC is showed on the analogue gauge.
SHR-150C adopts the design of load test force in electric, except to lift up the anvil and chose the test force, other operations are
entirely automatic. The test force, dwell time, load and unload process, and test results are displayed on LCD screen, which avoid
the man-made error and enhance the measuring accuracy, meanwhile, built-in processor and
Specifications:
Model
SHR-150M (D)
SHR-150E (D)
SHR-150C (D)
Rockwell Scales
HRA(2088), HRB(20100)HRC(2070)
10Kgf(98.07N)
Analogue
Hardness Resolution
0.5HR
0.5HR
0.1HR
Without
Without
HRA,HRB,HRC,HV,HK,HBW
Dwell Time
Manual
Manual
Electronic
Electronic
Man-made Reading
Need
Need
No Need
Printer
Without
Without
With
PC Connecting
Without
Without
RS232
Power supply
Without
AC220V50Hz, 110V60Hz
AC220V50Hz, 110V60Hz
170mm
Instrument Throat
140mm
Dimension(LWH)
520240700mm
120Kg100Kg
Accuracy
1.2
www.klass-messzeuge.ro
Features:
DHB-3000 is an modern electronic Brinell Hardness Tester integrated the precision mechanical structure and the technology of
computer control. The testing force and dwell time is controlled by 50 accurate sensor system. The loading and unloading of ball
indenter is driven by the instrument automatically. After the circular indentation formed, using 20 portable Brinell microscope to
measure the diameter of indentation by means of micrometer, then input the length to instrument through panel, the processor will
compute and output the Brinell value automatically.
MHB-3000 is an advance digital Brinell Hardness Tester based on the technology of DHB-3000.It has auto indentation reading
system by means of 15 portable Brinell microscope and digital length sensor. It doesnt need read the detail length of indentation,
only need operators aim the tangent of indentation out of anvil, then press the button of sensor, the length will be input into
instrument processor, and it will compute and output the Brinell value automatically.
XHB-3000 is n modern advance digital Brinell Hardness Tester based on the technology of MHB-3000.It has auto indentation
reading system by means of 20 built-in Brinell microscope and digital length sensor. It doesnt need read the detail length of
indentation out of anvil, only need operators aim the tangent of indentation on the anvil, then press the Brinell value automatically. It
has the function of hardness conversion between HB and HR, HV, HK, etc.
Specifications:
Model
DHB-3000
MHB-3000
XHB-3000
Testing Range
Testing Force
Kgf
Accuracy
Hardness Range
Max. Tolerance
Repetition
HBW125
3.5
125HBW225
2.5
3.0
HBW225
2.0
2.5
225mm
Instrument throat
135mm
Hardness Indication
LED
Small LCD
Large LCD
Microscope Style
Portable
Portable
Built-in
Magnification of Microscope
Analogue 20
Digital 15
Digital 20
Resolution of microscope
0.005mm
0.005mm
0.005mm
Table Checking
Need
No-need
No-need
Printer
Without
Without
With
PC Connecting
Without
Without
LED Lightsource
Without
With
With
Hardness Conversion
Without
Without
Power
AC220V50Hz, 110V60Hz
160Kg130Kg
www.klass-messzeuge.ro
1.3
Specifications:
Model
Testing Force
1.4
HV-5
HV-10
HV-30
HV-50
2.94N(0.3Kgf)
2.94N(0.3Kgf)
9.80N(1.0Kgf)
9.80N(1.0Kgf)
4.90N(0.5Kgf)
4.90N(0.5Kgf)
29.4N(3.0Kgf)
49.0N(5.0Kgf)
9.80N(1.0Kgf)
9.80N(1.0Kgf)
49.0N(5.0Kgf)
98.0N(10.0Kgf)
19.6N(2.0Kgf)
29.4N(3.0Kgf)
98.0N(10.0Kgf)
196.0N(20.0Kgf)
29.4N(3.0Kgf)
49.0N(5.0Kgf)
196.0N(20.0Kgf)
294.0N(30.0Kgf)
49.0N(5.0Kgf)
98.0N(10.0Kgf)
294.0N(30.0Kgf)
490.0N(50.0Kgf)
Turret
Manual
Manual
Magnification of Objective
10(Observation);20(Measurement)
10(Observation& Measurement)
Magnification of Eyepiece
10
10
Magnification of Microscope
100200
100
Testing Range
8HV0.32900HV50
Loading Control
Hardness Indication
LCD display
Dwell Time
Illumination
Printer
160mm
Instrument Throat
135mm
Accuracy
Power Supply
AC220V50Hz, 110V60Hz
Dimension
520190650mm
60Kg / 50Kg
www.klass-messzeuge.ro
Features:
It applies computer software program, high-resolution optical measuring system and photo electric sensor.
Through Key-input on the panel, it can adjust brightness of light source, select Vickers test, hardness converse comparison, dwell
time, file number and store, etc.
LCD screen displays test method, test force, length of diagonal, hardness value. It is easy to use with high precision.
HVS series is equipped with auto-turret, Halogen Light-source and Built-in Mini-printer as the standard delivery.
Specifications:
Model
HV-5
HV-10
HV-30
HV-50
Testing Force
2.94N(0.3Kgf)
2.94N(0.3Kgf)
9.80N(1.0Kgf)
9.80N(1.0Kgf)
4.90N(0.5Kgf)
4.90N(0.5Kgf)
29.4N(3.0Kgf)
49.0N(5.0Kgf)
9.80N(1.0Kgf)
9.80N(1.0Kgf)
49.0N(5.0Kgf)
98.0N(10.0Kgf)
19.6N(2.0Kgf)
29.4N(3.0Kgf)
98.0N(10.0Kgf)
196.0N(20.0Kgf)
29.4N(3.0Kgf)
49.0N(5.0Kgf)
196.0N(20.0Kgf)
294.0N(30.0Kgf)
49.0N(5.0Kgf)
98.0N(10.0Kgf)
294.0N(30.0Kgf)
490.0N(50.0Kgf)
Auto Turret
Magnification of Objective
10(Observation);20(Measurement)
10(Observation& Measurement)
Magnification of Eyepiece
10
10
Magnification of Microscope
100200
100
Testing Range
8HV0.32900HV50
Loading Control
Hardness Indication
LCD display
Dwell Time
Illumination
Halogen Light-source
Printer
Built-in Mini-printer
160mm
Instrument Throat
135mm
Accuracy
Power Supply
AC220V50Hz, 110V60Hz
Dimension
520190650mm
Gross Weight
60Kg
Net Weight
50Kg
www.klass-messzeuge.ro
1.5
Features
Vexus HVS-3050AZ mainly equips with precision force loadingunloading system, auto-turret, LCD display and panel, CCD
adapter and camera, PC system, auto-platform and auto-controlling-measuring-software MD1000. Vexus HVS-3050AZ has
two-kind of measuring model, one is by main instrument ,it is traditional measurement operation; another is by software.
By Vickers measuring software MD1000, all of the operation is by mouse except the focus-finding manually, which makes the
operational step of hardness testing much ease and simple. Most of important, the auto-software MD 1000 avoids the human-error
and improves the accuracy of measurement.
Specifications:
Model
Test Force
HVS-30AZ
HVS-50AZ
Kgf
0.30.5135102030
123510203050
2.9424.9039.80729.4249.035 4.9039.80729.4249.03598.07
98.07196.14294.21
Dwell Time
Auto Turret
Objective
1.6
196.14294.21490.35
Observing:10,Measuring:20
Digital Eyepiece
10
Magnification Of Microscope
Observing:100,Measuring:200
220mm
Auto XY Anvil
Dimensions:110*110m, Travel:25mm,Resolution:0.01mm
Hardness Conversion
Video system
PC Configuration
P4: 2.4G, 80G Memory, USB interface and PCI slot, RS232 port
Measuring Software
MD1000
Accuracy
Light source
Power Supply
AC220V50Hz, 110V60Hz
www.klass-messzeuge.ro
Interface
Functions:
Features:
HV-HRC controller;
Cylinder correct;
Report generator.
Configuration:
A).HardwareP4:2.4G,80G Memory, USB interface and PCI slot, and RS232 port.
B).Monitor resolution: 1024*768(best);Screen color quality: 32
C).Operation system: Windows XP
www.klass-messzeuge.ro
1.7
Features:
Wide measuring range. Based on the principle of Leeb hardness testing theory. It can
measure the Leeb hardness of all metallic materials.
Large screen, showing all functions and parameters. With EL background light
Test at any angle, even upside down.
Direct display of hardness scales HRB, HRC, HV, HB, HS, HL
Seven impact devices are available for special application. Automatically identify the type
of impact devices.
Large capacity memory could store 500 groups (Relative to average times 32 1 )
information including single measured value, mean value, testing date, impact direction,
impact times, material and hardness scale etc.
Upper and lower limit can be preset. It will alarm automatically when the result value
exceeding the limit.
Battery information indicates the rest capacity of the battery.
Software calibration function; Software to connect with PC via USB port.
Compact metal case, suitable for use under poor working conditions
Continuous working period of no less than 50 hours with two alkaline batteries(AA size);
Auto power off to save energy.
Measuring range: (170960)HLD;(17-68.5)HRC,(19-651)HB,(80-976)H
(30-100)HS,(59-85)HRA,(13-100)HRB
Measuring direction: 0~360
Hardness Scale: HLHBHRBHRCHRAHVHS
Display: Segment LCD
Data memory: max. 100 groupsrelative to impact times 321
Working power: 3V2 AA size alkaline batteries
Continuous working period: about 100 hoursWith backlight off
Communication interface: RS232
Working temperature: 040; Storage temperature: -3060
Relative humidity: 90
Dimensions & Weight: 132 X 76.2 mm/345g (HL200/MH210) ; 150 X 74 X 32 mm/245g (MH180MH182 )
MH310/MH320
Measuring range: (170960)HLD
Measuring direction: 360
Display: dot matrix LCD, 128 X 64 dots
Data memory: max. 500 groupsrelative to impact times 321
Printing paper: width is (57.50.5) mm, diameter is 30mm
Battery charger: 9V /500MA
Continuous working period: about 150 hoursWith backlight off, no printing
Communication interface: USB1.1
Outline dimensions: 212 X 80 X 32mm
1.8
www.klass-messzeuge.ro
Impact Devices
Impact
Hardness value
device
76030HLD
53040HLD
DC
DL
D+15
G
6 / 10 HLD
6 / 10 HLD
53040HLDC
HLDC
87830HLDL
73640HLDL
76630HLD+15
54440HLD+15
59040HLG
50040HLG
50840HLE
82230HLC
Repeatability
76030HLDC
72530HLE
Error of value
59040HLC
10
6 / 10 HLD
12 HLDL
12 HLDL
12 HLD+15
12 HLD+15
12 HLG
12 HLG
12 HLE
12 HLE
12 HLC
12 HLC
Difference:
model
Printing function
Printer
Printer style
Cover material
remind
Data save
battery
MH180
With
Optional
Portable
Plastic
Number
100 group
AA
MH200
Without
Without
Without
Metal
Letter
500 group
AA
MH210
With
Optional
Portable
Metal
Letter
500 group
AA
MH310
With
Standard
Compositive
Plastic
Number
100 group
Chargeable
MH320
With
Standard
Compositive
Plastic
Number
500 group
Chargeable
Software Datapro
The software is a data processing software for Leeb hardness gauge(HL 210, MH180, MH310 and MH320). Running in Microsoft
Windows system. It can be connected to the instrument via communication port(USB or COM port).read the measured data stored
in instrument memory, perform online configuration. Transmit the measured data to PC. Process the measurement data, display the
visualized image, store the measurement data into database, load or remove the measurement data stored in database at any time,
and output the measurement data to printer connected to computer.
www.klass-messzeuge.ro
1.9
The durometer test stand is R&D for Shore A, C, and D Durometer. The test stand construction includes operating handle, adjusted
glass stage, die poise, clip beam of durometer and Carrick column. The shore hardness testing will be more accurate with the stand.
Specifications:
Model
LX-A
LX-C
LX-D
Test range
0-100 HA
0-100 HW
0-100 HD
10-90 HA
10-90 HW
10-90 HD
Stroke
2.5 mm
2.5 mm
0~2.5 mm
Tip dimension
0.79mm
SR2.5mm
SR0.1mm
1.10
www.klass-messzeuge.ro
Specifications:
The tester model numbers show the maximum opening (dimension A), and throat depth (dimension B). The letters tell you the type
of tester or specific application. "S" indicates a Superficial tester.
Model
Opening(A)
Depth(B)
PHR-1
1"(25mm)
1"(25mm)
PHR-1S
1"(25mm)
1"(25mm)
PHR-14
1"(25mm)
4"(100mm)
PHR-14S
1"(25mm)
4"(100mm)
PHR-2
2"(50mm)
2"(50mm)
PHR-2S
2"(50mm)
2"(50mm)
PHR-42
4"(100mm)
2"(50mm)
PHR-4-2S
4"(100mm)
2"(50mm)
PHR-44
4"(100mm)
4"(100mm)
PHR-84
8"(200mm)
4"(100mm)
PHR-16
Diameter:400mm
PHR-32
Diameter:800mm
PHR-64
Diameter:1600mm
www.klass-messzeuge.ro
1.11
PHB-150
PHB-300
Opening
150100mm
300150mm
4.2Kg
7.5Kg
Size
Net
Weight
Specifications:
Measuring range: < Measuring range: 100-400HBS;
Impact capacity: 4.9J;
Dimensions: 55 x 370mm
Weight: approx. 3.5kg
Specifications:
Measuring range: < 450 HBS;
Diameter of steel ball: 10mm;
Dimensions: 25 x 110mm
Weight: approx. 0.5kg
1.12
www.klass-messzeuge.ro
Advantage:
It is small and light, easy to take.
It is very easy to operate without any experience, in any occasion.
It has extensive testing range, from very soft pure aluminum to very hard
aluminum alloys, the testing range equal to 25150HB.
High-sensitivity. Webster Hardness tester only has 20 scales, but Barcol has
100 scales. So Barcol Hardness tester has much higher sensitivity.
It does not need a bench stand. Barcol Hardness Tester is put on one side of
the work pieces without bench stand.
Standard package:
1 Tester2 Standard testing blocks1 Calibration wrench2 Spare penetrators
Optional accessories:
Standard testing blockHigh: 87-89Low: 43-45 Spare penetrators
Disadvantage:
The surfaces of work pieces need to be broad and flat. It is inconvenient to test the hardness of strips, small-sized pieces or work
pieces with curved surfaces.
There will be conversion error. When testing the hardness of aluminum section materials, the Barcol hardness need to be changed
into Webster hardness, but there is 2.7 HW discrepancy between Barcol conversion table and GB Standard YS/T420-2000, so the
Barcol conversion table should be used cautiously.
www.klass-messzeuge.ro
1.13
Specifications:
hardness block
Technical specification
Dimension
Rockwell
(28-88)HRA;
6010mm
(88-100)HRB;
(20-65)HRC
Superficial
(79-91)HR15N;(42-80)HR30N;(20-70)HR45N;
Rockwell
(88-93)HR15T;(70-82)HR30T;(55-72)HR45T
Brinell
(150-600)HBW 10/3000;
6010mm
9015mm
(150-600)HBW 5/750;
(75-125)HBW 10/1000;
(75-125)HBW 5/250
(150-600)HBW2.5/187.5
6412mm
(150-600)HBW2.5/62.5
(150-500)HBW 5/750
Vickers
121215mm
(150-500)HBW 5/3000
141415mm
(150-750)HV 5;
6010mm
(150-750)HV 10;
(150-750)HV 30
Mocro Vickers
(200-300)HV 0.05;
255 mm
(200-300)HV 0.1;
(300-400)HV 0.15;
(400-500)HV 0.2;
(700-800)HV 0.2;
(700-800)HV 0.5;
(700-800)HV 1
1.14
Leeb
9055mm
Leeb G model
(450-540)HLG; (550-630)HLG
12070mm
www.klass-messzeuge.ro
www.klass-messzeuge.ro
1.15
www.klass-messzeuge.ro
Optional accessories:
Knoop indenter
Mini-printer
CCD adapter,
Camera and Monitor
Micro hardness testing software
DHV-1000
LCD panel
Auto-turret
MHV-1000
www.klass-messzeuge.ro
2.1
XHV-1000
Built-in printer
Eyepiece
Touch Interface
Turret
200, 400
(5-60)s
0.0625um
1HV2967HV
100 100 mm
25 25mm
70 mm
Instrument throat
95mm
Light source
Accuracy
Power Supply
110V/220V,60/50Hz
Standard delivery
2.2
www.klass-messzeuge.ro
Mounting clamp
Unequal specimen
clamp
Small bearing
Thin-piece clamp
clamp
Technical Specifications:
Series
Type
Test force
gf: 10,25,50,100,200,300,500,1000
Loading way
Dwell time
automatic conversion
Platform
Motorized by PC software
90mmmm
Eyepiece
Lens
Magnification: 10X
Reticle: Zero base line and sight line
10X /40X
20X/40X
Indenter
HV indenter
HV and HK indenter
Measuring
HV measurement
HV and HK measurement
Specimen max-width
120mm
Hardness conversion
HV transfer to HRC
Light source
Measuring range
5-3000HV
Accuracy
Dimension
Weight
Approximate 43kg
Power supply
AC220V/50HZ/60W; AC110V/60HZ/60W
XY anvil ; Thin specimen anvil ; Fork-shaped anvil ; Fine wire anvil;
Standard delivery
www.klass-messzeuge.ro
2.3
Specifications:
Model
MHV-1000Z(single indenter)
MHV-1000ZK(double indenter)
Indenter
HV indenter
HV and HK indenter
Test Force
1025501002003005001000 gf
98.07245.2490.3980.71961294249039807mN
2.4
Loading Control
Dwell Time
099s
Automatic
Magnification of objective
Measuring:40 Observing:10
Digital Eyepiece
90mm
XY anvil
Dimensions:110*110m, Travel:25mm,Resolution:0.01mm
Display
D1D2HVHRCHBHKMemoryFT4010Time
Operation method
Panel keyboard
Light Source
Rs232 interface
With
Video System
Accuracy
Power Supply
AC220V50Hz, 110V60Hz
Dimension
490*250*395mm(Height*Width*Depth)
GrossNet Weight
50Kg40 Kg
www.klass-messzeuge.ro
Functions:
Features:
loading etc.
1024768;
HV-HRC controller;
Cylinder correct;
Report generator.
Configuration:
A).HardwareP4:2.4G,80G Memory, USB interface and PCI slot, and RS232 port.
B).Monitor resolution: 1024*768(best); Screen color quality: 32
C).Operation system: Windows XP
www.klass-messzeuge.ro
2.5
www.klass-messzeuge.ro
MT200
MT160 / MT150
Functions:
Five transducer models are available for special application, including for coarse grain material and high temperature applications.
Probe-Zero function, Sound-Velocity-Calibration function
Two-Point Calibration function.
Two work modes: Single point mode and Scan mode.
Coupling status indicator showing the coupling status.
Battery information indicates the rest capacity of the battery.
Auto sleep and auto power off function to conserve battery life.
Optional software to process the memory data on the PC.
Optional thermal mini-printer to print the measured data via RS232 port.
Specifications:
Model
MT200
MT160
Display
MT150
Measuring Range
1000~9999 m/s
Resolution
0.1/0.01mmselectable
Accuracy
Units
Communication
Power Supply
Two AA size, 1.5 volt alkaline batteries. 100 hours typical operating time (EL backlight off)
Dimensions
132 x 76.2 x 35 mm
1507432 mm
Net Weight
345g
245g
0.10mm
Transducers:
Model
Freq.Mhz
Diam.mm
Measuring Range
Lower Limit
Description
N02
22
20
attenuating, or
N05
10
1.2mm-230.0mm ( In steel )
20*3.0mm
Normal Measurement
N05/90
10
1.2mm-230.0mm ( In steel )
20*3.0mm
Normal Measurement
N07
0.75mm-80.0mm ( In steel )
15*2.0mm
HT5
14
3mm-200mm ( In Steel )
30
www.klass-messzeuge.ro
3.1
Applications
Tested Materials.
magnetic substrate
(NF Type)
Eddy current
non-conductive
coating
layers
Specifications:
Model
Operating
F Type
CM-8825FN / CN-8826FN
CM-8825FN / CN-8826FN
CM-8825FN / CN-8826FN
principle
NF Type
(F & NF)
(only NF)
(only F)
Measuring range
Resolution
0.1/1
Accuracy
1-3%n or 2.5um
6mm
0.3mm
Battery indicator
Metric/ imperial
convertible
Power supply
Operating conditions
Main unit
F Type probe
N Type probe
Standard
delivery
1 set (4 foils)
Carrying case
B04
Instruction manual
Optional accessories
3.2
Specifications
1
1
1
1
www.klass-messzeuge.ro
1
1
1
1
--
Features:
Multiple parameter measurement: Ra, Rz, Rq, Rt
Highly sophisticated inductance sensor
Four wave filtering methods: RC, PC-RC, GAUSS and D-P
Built-in lithium ion rechargeable battery and control circuit with high
capacity
Small in size, light in weight and easy to use
Can communicate with PC computer for statistics, printing and
analyzing by the optional cable and the software for RS232C interface.
Manual or automatic shut down. The tester can be switched off by
pressing the Power key at any time. On the other hand, the tester will
power itself off about 5 minutes after the last key operation.
The tester can memorize 7 groups of measurement results and
measuring conditions for later use or download to PC for analyzing,
printing.
Metric / Imperial Conversion.
Specifications:
Model
SRT-6200
Display
Parameters
Ra, Rz
Measuring Range
SRT-6210
Accuracy
Not more than 10%; Fluctuation of display value: Not more than 6%
Test Principle
Inductance type
5um
Diamond
Dynamo-measurement of Probe
16mN(1.6gf)
Probe Angle
90
4mN(0.4gf)
48mm
17.5mm/0.7inch
Evaluation length
Driving speed
Vt=0.135mm/s
Vt=0.5mm/s
Vt=1mm/s
<d.> returning
Profile digital filter
Vt=1mm/s
Rechargeable
Operating conditions
Dimension
Net weight
About 420 g
www.klass-messzeuge.ro
3.3
www.klass-messzeuge.ro
Features:
Long working distance plan achromatic objectives (no cover
glass) and wide-field eyepieces, can get clear pictures and wide
view field ;
Coaxial coarse/fine focus system, with tensional adjustable
and up stop, minimum division of fine focusing: 2m.
6V 30W halogen lamp, adjustable brightness.
Trinocular, can switch to observe normally/ polarize
observation, bright-field/dark-field observation, can send 100%
of light to the binocular eyepieces or to the top port.
Specifications:
Eyepiece
Objective
Eyepieces tube
Vertical
illumination
unit
Focus system
Stage adjustable, Coaxial coarse/fine focus system, with tension adjustable and limit stopper,
minimum division of fine focusing: 2m.
Nosepiece
Stage
Optional accessories:
Eyepiece
Objective
CCD adapter
www.klass-messzeuge.ro
4.1
Features:
Long working distance plan achromatic objectives (no cover
glass) and wide-field eyepieces, can get clear pictures and wide
view field ;
Coaxial coarse/fine focus system, with tensional adjustable
and up stop, minimum division of fine focusing: 2m.
6V 30W halogen lamp, adjustable brightness.
Trinocular, can switch to observe normally/ polarize
observation, bright-field/dark-field observation, can send 100%
of light to the binocular eyepieces or to the top port.
Specifications:
Eyepiece
Objective
Eyepieces tube
Vertical
illumination
unit
Focus system
Stage adjustable, Coaxial coarse/fine focus system, with tension adjustable and limit stopper,
minimum division of fine focusing: 2m.
Nosepiece
Stage
Optional accessories:
Eyepiece
Objective
CCD adapter
4.2
www.klass-messzeuge.ro
Specifications:
Items
Standard Attachment
Eyepieces
Specification
IMS100
IMS200
Main Body
WF10/18;
WF10/20;
WF12.5/14
WF16/13;
Plan 10/0.25;
Plan 20/0.35(S);
Binocular Head
Inclined 45
Monocular Head
Inclined 45
Mechanical Stage
Size: 180165mm
110;
220
340
Filters
Micrometer
Division 0.01mm
Stage Plate
Illuminator
www.klass-messzeuge.ro
4.3
Specifications:
Items
Standard Attachment
Eyepieces
IMS200
Main Body
WF10/18;
WF10/20;
WF12.5/14
WF16/13;
Plan 10/0.25;
Plan 20/0.35(S);
Inclined 45
Monocular Head
Inclined 45
Stage Plate
IMS100
Binocular Head
Mechanical Stage
Size: 180165mm
110;
220
340
Illuminator
Filters
Micrometer
Division 0.01mm
4.4
Specification
www.klass-messzeuge.ro
Functions:
(A) Image Editing & View; (B) Morphometry Measurement; (C) Image Processing;
(D) Routine Filters; (E) Special Filters; (F) Edge Detection.
Features:
META VISION is suitable for a wide range of Image Analysis functions and the prominent functions
are described hereunder:
1. Calibration:
b) Area by enclosed line controlled by four arrow keys available on keyboard arrows with zoomed
Preview.
2. Count
&
Classification: Identification
of
objects
in
an image,
count
them,
obtain
defined
object to be
measured.
available for selected particle are: dimensions, area, parameter feret, length, thread length, thread
& fiber width,
4. Morphometery
angle, three point radius. Roundness, shape, orientation, elongination, equal circular diameter,
equal sphere volume.
5. Locational Analysis: Centroid X, Centroid Y, Major X1, Major Y1, Minor X1,
X2, Major Y2, Minor X2, Minor Y2, Box X2, Box Y2
6. Phase Analysis: Measure area fraction & volume fractions. Identify multiple phases with Micro
structure. Also delinate phase from the histogram as per ASTM standard E562 & E1245.SS.
7. Nodularity: Measure Nodularity as per ASTM 247 standard. The Nodules & Flakes are
separated on the basis of its shape and aspect ratio. The detail measurement of each micro
structure is available for further analysis. The processed image displays non-Nodules in different
color. The Nodules can be classify by its range on the basis of its size & shape.
8. Porosity: They are recognized on the basis of its intensity as per ASTM B-276 standard. The
measurement of each pores displayed.The processed image displays pores in Red Color.
9. Coating Thickness: This application rapidly measures the thickness or width of a coating at
multipl positions along a sample as per ASTM B487 Standards. Tabulated results available for
min/max and mean of width Measured at various points of sample cross section.
10. Decarburisation:
Measured depth or width of decarburisation occurs as per ASTM 1077 standards.
11. Grain Size: The module analysis Grain image and measure the Grain No & Grain size using
ASTM E 112 method. The option for measurement available are: 1.Manual trace;2.Popular
comparison method;3.Quick single grain measurement; 4.ALA method; 5.Interception method.
Various filters to make use defined templates. Grain boundary repair mathematical function.
12. Non-Metallic Inclusion:
Measure inclusions and report ASTM E-45, E-1245 numbers, cumulative length width ratio.
13. Graphic Flakes: Graphite Flakes length, Width distribution and Percentage as per
ASTMA-247-67.
14.Report: a) Direct printout with original image, processed image & Tabular results.
b) Export to MS EXCEL for further modifications.
www.klass-messzeuge.ro
4.5
Technical Specifications:
Model
STM-505
STM-505D
Measuring travel
50 x 50mm
Working distance
67mm
96x96mm
115mm
5Kg
Magnification: 30x (15x eyepiece; 2x objective)
Optical system
Optional accessories
CCD camera,
digital cross line generator,
monitor
4.6
Power supply
AC110V/60Hz; 220V/50Hz
Dimension
210x333x391mm
Weight
13.5Kg
www.klass-messzeuge.ro
Technical Specifications:
Infinitive optical system 50X-500X;tube lens focal length:200mm;
Trinocular microscope head, Inclined at 30;
Optical Imaging System
Interpupillary distance:55-75mm;
High-eye-point and wide-field Eyepiece:SWF10/22;
Long working distance; Quintuple Nosepiece; optical fiber light-source;
Plan Apo Objectives:2X/0.055,5X/0.14,10X/0.28,50X/0.42
Working travel:250 x150mm
Resolution:0.001mm
Accuracy of Measurement(2+L/200)um;
Repeatable accuracy:2um
Optional Accessories
www.klass-messzeuge.ro
4.7
PC Configuration:
Hardware:P4 1.7 G;
Hard disk;80 G
CD/DVD driver;
USB interface and RS232;
Display resolution:1024*768(best)
Screen color quality:32 digit;
Operation system: Windows XP/Vista;
Output: TXT,
Accessories:
DRO DP300 with Sine scale function;
USB scale transfer box USB3.0
Footswitch
Functions:
Measurement of basic graph: Point, Line, Circle, Arc, Rectangle and Cirque;
Axis-skew and coordinate-shift;
Element construction: Construct the Center, inetersection, Midpoint, Line, Circle and Angle, etc;
Save as .dxf and edit in AutoCAD;
Multi-point measurement;
Excel and TXT report;
English operation interface, other language available;
Zoom in, Zoom out, Move, Print, Select, Cancel select, Delete;
Tolerance setup;
Size and angle label;
Scale calibration;
Q-axis record;
Update forever and OEM available
4.8
Image
Auto-motor
4-divisionLED
40-division LED
Probe
display
control
illumination
illumination
measurement
Application
QuickMeasuring 1.0
without
without
without
without
without
2D;Profile projector
QuickMeasuring 2.0
with
without
without
without
without
2D:VMM,VMM-CI
QuickMeasuring 2.1
with
without
with
without
without
2D:Vexus VM
QuickMeasuring 3.0
with
without
without
without
with
QuickMeasuring 3.1
with
without
with
without
with
3D: VMM-P
3D:Vexus
VMM
QuickMeasuring 4.0
with
with
with
without
without
2DNC:VMM-NC
QuickMeasuring 4.1
with
with
with
with
without
2DCNC:vexus VMC
QuickMeasuring 4.2
with
with
with
with
with
3DCNC:VMT
www.klass-messzeuge.ro
www.klass-messzeuge.ro
4.9
4.10
www.klass-messzeuge.ro
www.klass-messzeuge.ro
4.11
Main Function:
Measurement of point, line, circle, angle, distance, rectangle and screw thread, preset and construction. Sampling points
maximum up to 50.
Coordinate skew and movement ,it is more convenient that the operator can skew position of work-pieces for measuring, which
can reduce adjust time obviously;
Clearance function can delete list, adjustment, and all ;
Obverse or Opposite direction counting function, according to the operators requirement;
Half function, rapidly determine to display 1/2 value, and confirm midpoint of section;
Permission function: Advanced setup can be done after right password input;
Call function: input record ID to use existing element;
Communication port of foot-switch or REINSHAW probe available;
Printing: print graphic elements and 3-axis displaying value;
RS232 output function: convey current position of linear scale to PC;
USB output: through USB cable convey date to PC;
Multi-display, separately display polar coordinates and Cartesian coordinates, and can display millimeter and inch , and can shift it
easily;
Linear compensation and section compensation in available;
Z-axis can connect linear scale and rotate encoder;
Save 100 permanent graphic elements.
DP100
DP300
display more text data and graph than DP100, and the help
Segment-Code
operate. From the side, you can obviously see the difference
Appearance
4.12
LCD,
it
is
used
to
display
www.klass-messzeuge.ro
Display
Segment-Code
LCD
displays
coordinate
Display
Press
more
information
www.klass-messzeuge.ro
4.13
Functions:
Isolated 3-axis linear scale interface, 24-bit counter is reversible;
A set of external trigger can lock the value of the 1-axis and 3-axis simultaneous;
The delay of external signal trigger can lock the value <20us;
The computation direction (+ or -) is adjustable;
The signal polarity can be chosen when searching the RI point and the RI signal;
The digital filter can enhance the anti-jamming capacity;
Supply the DLL function library, support the VC++6.0, Borland C++, Builder 4.0/5.0 and other developing platform.
Specification:
Power supplied: +5V supplied by the USB interface without external power;
Power: Max 150mA/5V when not connected with the linear scales, the typical is 100mA/5V;
Dimension: 150mm*128mm*51mm(without pad); 150mm*128mm*45mm(with pad);
Parameter of the Linear scales connected with USB-301. A.B.RI single signal input, orthogonality TTL, frequency<1MHz. signal
current>1mA.use<70mA/5V.
Configuration:
Hardware: The main board supports the USB1.1 interface;
Operating system: Windows XP(Chinese Simplified, Chinese Traditional & English)
Windows 2000(Chinese Simplified, Chinese Traditional & English)
4.14
www.klass-messzeuge.ro
Linear scale
Applied-fields:
Linear scale is an optical displacement sensor for position navigation, and it is the necessary parts for modern optical measuring
machines and other manufacturing machines.
We supply the linear scale with 0.5um,1um,5um resolution, and the effective sensor length reach 3m.
Specifications:
Model
Resolution
Accuracy
Repeatab
Effective
speed
travel
ility
50mm-500mm
500mm-1000mm
Accuracy
Standard
High-Precision
Standard
High-Precision
5um
MSE1
1um
501000mm
>20m/min
1um
5um
3um
8um
MSE5
5um
501000mm
>60m/min
5um
5um
3um
8um
5um
MSE0.5
0.5um
501000mm
>10m/min
0.5um
5um
3um
8um
5um
MSE0.2
0.2/0.1um
501000mm
>10m/min
0.2um
5um
3um
8um
5um
Model
Resolution
MSF1
1um
501000mm
>20m/min
Effective
speed
travel
Accuracy
Repeatability
Accuracy
50mm-500mm
500mm-1000mm
Standard
High-Precision
Standard
High-Precision
1um
5um
3um
8um
5um
MSF5
5um
501000mm
>60m/min
5um
5um
3um
8um
5um
MSF0.5
0.5um
501000mm
>10m/min
0.5um
5um
3um
8um
5um
MSF0.2
0.2/0.1um
501000mm
>10m/min
0.2um
5um
3um
8um
5um
Accuracy
Repeatabil
Model
Resolution
Effective travel
speed
ity
50mm-500mm
500mm-1000mm
Accuracy
Standard
High-Precision
Standard
High-Precision
MSG1
1um
501000mm
>20m/min
1um
5um
3um
8um
5um
MSG5
5um
501000mm
>60m/min
5um
5um
3um
8um
5um
10002000mm
20003000mm
MSG1
1um
501000mm
>10m/min
0.5um
35um
24um
50um
34um
MSG5
5um
501000mm
>10m/min
0.2um
35um
24um
50um
34um
Model
MSF1
MSF5
MSE1
MSE5
MSG1
MSG5
20um,10um
Measuring system
Rolling system
Output signal
EIA-422-A(RS-422)
Power supply
5V5%DC
12V5%DC
Environment
Temperature 050%
Humidity<90%
www.klass-messzeuge.ro
4.15
Accesorii
4.16
www.klass-messzeuge.ro
Accesorii
www.klass-messzeuge.ro
4.17
www.klass-messzeuge.ro
Specifications:
Model
UTM-D300
UTM-D50
UTM-D10
Capacity(optional)
100N,200N,500N,
100N,200N,500N,
1KN,2KN,5KN,
1KN,2KN,5KN,10KN
10KN,20KN,50KN
Unit(switchable)
Load Resolution
1500,00
Load Accuracy
0.25
No-segment
Effective Width
Test Speed(mmmin)
0.001500
Speed Accuracy
0.5
Travel Resolution
0.001mm
Software
Motor
AC servo motor
0.001500
0.001500 or 0.0011000
9006002200mm
Transmission Haulm
Dimension
10809502200mm
8007002400mm
Net weight
1500 Kg
195 Kg
150 Kg
Power Supply
AC220V50Hz15A
AC220V50Hz10A
AC220V50Hz10A
AC110V60Hz15A
AC110V60Hz10A
AC110V60Hz10A
www.klass-messzeuge.ro
5.1
Specifications:
Model
Capacity(optional)
Unit(switchable)
Load Resolution
1500,00
Load Accuracy
0.25
No-segment
650,1000(optional)
Effective Width
130mm
Test Speed
0.001500 mmmin
Speed Accuracy
0.5
Travel Resolution
0.001mm
Software
Motor
AC servo motor
Transmission Haulm
Dimension
5006001200mm(travel:650mm)or 5006001550mm(travel:1000mm)
Net weight
95Kg
Power Supply
AC220V50Hz10A, AC110V60Hz10A
Software MVD2000
The measuring and control system is the key for material machine, it directly concerns the precision, function, reliable, sphere of
application.
The development of this software is base on XPVista system. It achieves the display and process of curve, graph of circle; And it is
based on Ms-Access database of the modularization of software, save and process of cu, graph of circle; And it is based on
Ms-Access database of the modularization of software, save and process of date.
This software is have Chinese and English two languages version.
It achieves the free exchange of metric and British Unit, and management of standards of ISOGBENDINJISASTM(it can plus or
minus in freely, concentrated manage for testing method, using in convenience), management of testing sample shape,
management of operators authority.
5.2
www.klass-messzeuge.ro
Characteristic:
Instrument is operated by mouse and keyboard and Touch screen is
available on VTC series.
Z-axis lens lift-system ensure the unmoved stage to bear heavy parts.
Powerful surface measurement;
High repeatable and accuracy;
TXT , Excel report output ,Dxf input or output;
4-division LED illumination is optional available;
Z-axis video height measurement is optional available;
Z-axis touch probe measurement is optional available;
Standard Measuring software QuickMeasuring 2.0;
Benchtop printer connecting is available.
Technical Specifications:
Model
VC2010(VTC2010)
(X/Y/Z)Measuring range(mm)
200100150
Machine dimension(mm)
VC2515(VTC2510)
VC3020(VTC3020)
250150150
300200150
6508001600
Operation mode
Manual
Magnification
20-120X
Screen dimension
95mm
1m
Accuracy
(3+L/200) m
Repeatability
5m
Measuring software
QuickMeasuring 2.0
430,000pixel
Suitable environment
10Kg
Power supply
AC110V/60Hz; 220V/50Hz
Accessories:
1XCCD adapter(standard)
0.74.5X
0.74.5X
Zoom lens
Working distance
Zoom lens
Digital magnification
Visual field
Digital magnification
Visual field
0.5X(option)
1595X
203.2mm
7.548X
406.4mm
175mm
1X(standard)
30190X
10.6106mm
1596X
203.2mm
96mm
2X(option)
60380X
50.8mm
30190X
10.61.6mm
32mm
www.klass-messzeuge.ro
6.1
Characteristic:
Instrument is operated by mouse and keyboard, and Touch screen is
Z-axis lens lift-system ensure the unmoved stage to bear heavy parts.
Technical Specifications:
Model
HV3015 (HTV3015)
HV3020 (HTV3020)
(X/Y/Z)Measuring range(mm)
300150150
300125200
Machine dimension(mm)
6508001600
Operation mode
Manual
Magnification
20-120X
Screen dimension
95mm
1m
Accuracy
(3+L/200) m
Repeatability
5m
Measuring software
QuickMeasuring 2.0
430,000pixel
Suitable environment
15Kg
Power supply
AC110V/60Hz; 220V/50Hz
Accessories:
1XCCD adapter(standard)
0.74.5X
0.74.5X
Zoom lens
Zoom lens
Digital magnification
Visual field
Digital magnification
Visual field
0.5X(option)
1595X
203.2mm
7.548X
406.4mm
175mm
1X(standard)
30190X
10.6106mm
1596X
203.2mm
96mm
2X(option)
60380X
50.8mm
30190X
10.61.6mm
32mm
6.2
Working distance
www.klass-messzeuge.ro
Characteristics:
Sturdy metal design with novel shape;
Excellent optical path with sharp image: magnification error < 0.08%;
Large travel stage with precise accuracy: 3+L/75;
DRO Dp100 with powerful measurement and process functions;
Z-axis focus system adopts double rails lifting structure;
Drawing, PC measurement report and SPC analyze easily.
Technical Specifications:
Model
15050 mm
200100 mm
340152 mm
350170 mm
19696 mm
246120 mm
0.001 mm
Travel: Z axis
90 mm (for focusing)
Screen diameter
0360
1'/0.01
Accuracy
3+L/75 (um)
Objective magnification
10X(Std.)
20X(Opt.)
50X(Opt.)
100X(Opt.)
Object view-field
30 mm
15 mm
6 mm
3 mm
Work distance
77.7 mm
44.3 mm
38.4 mm
25.3 mm
Digital Readout
Instrument Illumination
Power
Dimension (D W H)
8005301150 mm
8005301150 mm
Instrument Weight
150Kg
170Kg
Standard delivery:
Main instrument with worktable; DRO DP100; 10X objective & transmitted mirror; mini-printer
Optional accessories:
20x, 50x &100x objective & mirror; footswitch; angle & radius over-chart; Rotary-table; measuring software; working cupboard.
www.klass-messzeuge.ro
6.3
Characteristics:
Sturdy metal design with novel shape;
Excellent optical path with sharp image: magnification error < 0.08%;
Large travel stage with precise accuracy and heavy load;
DRO DP100 with powerful measurement and process functions;
Z-axis focus system adopts projector body lifting system;
Drawing, PC measurement report and SPC analyze Easily.
Technical Specifications:
Model
Reverse image
Pomeas JT3015A
Pomeas JT3020A
Pomeas JT3025A
Obverse image
Pomeas JT3015AZ
Pomeas JT3020AZ
Pomeas JT3025AZ
15050 mm
200100 mm
250150 mm
340152 mm
450280 mm
450280 mm
19696 mm
306196 mm
306196 mm
0.001 mm
Travel: Z axis
90 mm (for focusing)
Screen diameter
0360
1'/0.01
Accuracy
3+L/75 (um)
Objective magnification
10X(Std.)
20X(Opt.)
50X(Opt.)
100X(Opt.)
Object view-field
30 mm
15 mm
6 mm
3 mm
Work distance
77.7 mm
44.3 mm
38.4 mm
25.3 mm
Digital Readout
Instrument Illumination
Power
Dimension (D W H)
7605301100 mm
7605301100 mm
7605301100 mm
Instrument Weight
180Kg
190Kg
200Kg
Standard delivery:
Main instrument with worktable; DRO DP100; 10X objective & transmitted mirror; mini-printer
Optional accessories:
20x, 50x &100x objective & mirror; footswitch; angle & radius over-chart; Rotary-table; measuring software; working cupboard.
6.4
www.klass-messzeuge.ro
Characteristics:
Sturdy metal design with fashionable shape;
Excellent optical path with sharp image: magnification error < 0.08%;
Large travel stage with precise accuracy: 3+L/75;
DRO DP300 with powerful measurement and process functions;
Z-axis focus system adopts double rails lifting structure;
Drawing, PC measurement report and SPC analyze Easily.
Technical Specifications:
Model
Vexus VB 12-1550
VexusVB12-2010
Vexus VB 12-1550Z
Vexus VB 12-2010Z
340x152mm
350x170mm
196x96mm
246x120mm
150mm
200mm
Worktable
50mm
100mm
90mm(for focusing)
90mm(for focusing)
Accuracy
3+L/75(um)
Resolution of X and Y-scale:0.001mm
Screen diameter: 312mm,effective range> 300(with * reticle)
Rotary range of screen:0360
Screen
Objective
Magnification
10x(std.)
20x(opt.)
50x(opt.)
100x(opt.)
Object view-field
30mm
15mm
6mm
3mm
Work distance
77.7mm
44.3mm
38.4mm
25.3mm
Measuring height
90mm
Digital readout
Illumination
Power
AC110V/60Hz;220V/50Hz,400W
Cooling
Forced cooling(3-axis-fans)
Dimension(LWH)
8005501150mm
8005501150mm
150kg
170kg
Standard delivery:
Main instrument with worktable; DRO DP300; 10X objective & transmitted mirror; mini-printer
Optional accessories:
20x, 50x &100x objective & mirror; footswitch; angle & radius over-chart; Rotary-table; measuring software; working cupboard.
www.klass-messzeuge.ro
6.5
Characteristics:
Sturdy metal design with fashionable shape;
Excellent optical path with sharp image: magnification error < 0.08%;
Large travel stage with precise accuracy: 3+L/75um;
DRO DP300 with powerful measurement and process functions;
Z-axis focus system adopts double rails lifting structure;
Drawing, PC measurement report and SPC analyze Easily.
Technical Specifications:
Model
250150 mm
300200 mm
535350mm
620420 mm
386294 mm
480392 mm
0.001 mm
Travel: Z axis
90 mm (for focusing)
Screen diameter
0360
1'/0.01
Accuracy
3+L/75 (um)
Objective magnification
10X(Std.)
20X(Opt.)
50X(Opt.)
100X(Opt.)
Object view-field
30 mm
15 mm
6 mm
3 mm
Work distance
77.7 mm
44.3 mm
38.4 mm
25.3 mm
Digital Readout
Instrument Illumination
Power
Dimension (D W H)
9006501400 mm
9006501400 mm
Instrument Weight
220Kg
240Kg
Standard delivery:
Main instrument with worktable; DRO DP300; 10X objective & transmitted mirror; mini-printer
Optional accessories:
20x, 50x &100x objective & mirror; footswitch; angle & radius over-chart; Rotary-table; measuring software; working cupboard.
6.6
www.klass-messzeuge.ro
of
complicated
work-pieces
such
as
Template,
Pressing
Characteristics:
Sturdy metal design with novel shape;
Excellent optical path with sharp image: magnification error < 0.08%;
Large travel stage with precise accuracy: 3+L/75;
DRO DP100 with powerful measurement and process functions;
Touch panel switch protects operators' safe
Cold surface optical fiber light source insures the unsealing for
operators and undamaging for the tested specimens
Technical Specifications:
Model
HB12-2010
HB12-2515
Screen diameter
Projective screen
300 mm
Rotation range
0~ 360
1or 0.01
Worktable
200x100mm
250x150mm
X axis travel
200mm
250mm
Z axis travel
100mm
150mm
X, Z linear resolution
0.001mm
Y-axis travel
Sway range
15
Load capacity
15kg
Accuracy
Light source
Lens: (Magnification
error0.08% )
(3+L/75)um
Contour lighting:
Surface lighting:
Magnification
10
20
50
100
Visual Field
60mm
30mm
15mm
6mm
3mm
Working Distance
93.7mm
77.7mm
43.4mm
38.4mm
25.3mm
Power supply
Digital readout
Illumination
Standard delivery:
Main instrument with worktable; DRO DP100; 10X objective & transmitted mirror; mini-printer
Optional accessories:
20x, 50x &100x objective & mirror; footswitch; angle & radius over-chart; Rotary-table; measuring software; working cupboard.
www.klass-messzeuge.ro
6.7
Characteristics:
Sturdy metal design with novel shape;
Excellent optical path with sharp image: magnification error < 0.08%;
Large travel stage with precise accuracy: 3+L/75;
DRO DP300 with powerful measurement and process functions;
Touch panel switch protects operators' safe
Cold surface optical fiber light source insures the unsealing for
operators and undamaging for the tested specimens
Technical Specifications:
Model
HB16-3015
HB16-3020
Screen diameter
400 mm
Rotation range
0~ 360
Projective screen
Worktable
1or 0.01
400x150mm
455x125mm
X axis travel
300mm
300mm
Z axis travel
150mm
200mm
X, Z linear resolution
0.001mm
Y-axis travel
Sway range
15
210kg
Accuracy
(3+L/75)um
Contour lighting:
Light source
Surface lighting:
Magnification
Lens: (Magnification
error0.08% )
10
20
50
100
Visual Field
80mm
40mm
20mm
8mm
4mm
Working Distance
93.7mm
77.7mm
43.4mm
38.4mm
25.3mm
Power supply
Digital readout
Illumination
Standard delivery:
Main instrument with worktable; DRO DP100; 10X objective & transmitted mirror; mini-printer
Optional accessories:
20x, 50x &100x objective & mirror; footswitch; angle & radius over-chart; Rotary-table; measuring software; working cupboard.
6.8
www.klass-messzeuge.ro
Characteristics:
Sturdy metal design with novel shape;
Excellent optical path with sharp image: magnification error <
0.08%;
Large travel stage with precise accuracy: 3+L/75;
DRO DP300 with powerful measurement and process functions;
Touch panel switch protects operators' safe
Cold surface optical fiber light source insures the unsealing for
Technical Specifications:
Model
HB24-3015
HB24- 3020
Screen diameter
300 mm
Rotation range
0~ 360
Screen
Worktable
1or 0.01
455x126mm
455x126mm
X axis travel
300mm
300mm
Z axis travel
150mm
0.001mm
Y-axis travel
Sway range
15
Accuracy
(3+L/75)um
Net weigh
Magnification
Objective
200mm
X, Z linear resolution
Visual Field
Working Distance
400kg
5
10
10
420 kg
20
50
100
60mm
30mm
40mm
20mm
8mm
4mm
93.7mm
77.7mm
77.7mm
43.4mm
38.4mm
25.3mm
Power supply
Digital readout
Illumination
Dimension (length x width x high)
15508401350(mm)
Standard delivery:
Main instrument with worktable; DRO DP300; 10X objective & transmitted mirror; mini-printer
Optional accessories:
20x, 50x &100x objective & mirror; footswitch; angle & radius over-chart; Rotary-table; measuring software; working cupboard.
www.klass-messzeuge.ro
6.9
Characteristic:
Video measuring system is a photoelectric measuring system with high precision and efficiency. It is composed of a series of
components .Such as color CCD camera ,CCD adapter ,zoom lens ,PC monitor ,capture card ,measuring software ,precision linear scale
and high precision worktable.
Technical Specifications:
Model
VMM-1510
VMM-2010
VMM-2515
VMM-3020
VMM-4030
VMM-5030
354 x 228mm
404 x 228mm
450 x 280mm
510 x 290mm
606 x 466mm
700 x 450mm
210 x 160mm
260 x 160mm
306 x 196mm
350 x 280mm
450 x 350mm
550 x 350mm
500 x 300mm
Travel: X,Y
150 x 100mm
200 x 100mm
250 x 150mm
300 x 200mm
400 x 300mm
Net Weight
100kg
110kg
120kg
200kg
240kg
500kg
Dimension
700x600x900
760x600x900
770x590x1000
95 x700x1100
1600x800x1660
Z-axis travel:150mm
Work distance:108mm
X,Y-axis accuracy:(3+L/200)um
Video system
Object view-field:10.61.6mm
Contour and surface illumination: Ring LED and brightness can be setup
Power: AC110V/60Hz;220V/50Hz
Software: QuickMeasuring 3.0
Accessories:
1XCCD adapter(standard)
Zoom lens
0.74.5X
0.74.5X
Working distance
Zoom lens
Digital magnification
Visual field
Digital magnification
Visual field
0.5X(option)
1595X
203.2mm
7.548X
406.4mm
175mm
1X(standard)
30190X
10.6106mm
1596X
203.2mm
96mm
2X(option)
60380X
50.8mm
30190X
10.61.6mm
32mm
Recommended working cupboard: JT03U, loading350kg, dimension (length x width x height):1000 x600 x500(mm)
6.10
www.klass-messzeuge.ro
Characteristic:
3D Video measuring system is a photoelectric measuring system with high precision and efficiency. It is composed of a series of
components, such as color CCD camera , CCD adapter , zoom lens , PC monitor, capture card , measuring software , precision linear
scale, high precision worktable and precise probe.
Technical Specifications:
Model
VMM-1510P
VMM-2010P
VMM-2515P
VMM-3020P
VMM-4030P
354 x 228mm
404 x 228mm
450 x 280mm
510 x 290mm
606 x 466mm
210 x 160mm
260 x 160mm
306 x 196mm
350 x 280mm
450 x 350mm
Travel:X,Y
150 x 100mm
200 x 100mm
250 x 150mm
300 x 200mm
400 x 300mm
Net Weight
100kg
110kg
120kg
200kg
240kg
Dimension
700x600x900
760x600x900
770x590x1000
95 x700x1100
Z-axis travel:150mm
Work distance:108mm
X,Y-axis accauracy:(3+L/200)um
Video system
Object view-field:10.61.6mm
Contour and surface illumination: Ring LED and brightness can be setup
Power: AC110V/60Hz;220V/50Hz
Software: QuickMeasuring 3.0
Accessories:
1XCCD adapter(standard)
Zoom lens
0.74.5X
0.74.5X
Working distance
Zoom lens
Digital magnification
Visual field
Digital magnification
Visual field
0.5X(option)
1595X
203.2mm
7.548X
406.4mm
175mm
1X(standard)
30190X
10.6106mm
1596X
203.2mm
96mm
2X(option)
60380X
50.8mm
30190X
10.61.6mm
32mm
Recommended working cupboard: JT03U, loading350kg, dimension (length x width x height):1000 x600 x500(mm)
www.klass-messzeuge.ro
6.11
Characteristic:
It is mainly applied in 2D measurement field, such as: PCB, mobile
phone fittings, linker, machine fitting, precision fixture, and it can
measure height in video solution too.
It is a necessary instrument for 2D noon-contact measurement in
college, research institute and metrology department.
Technical Specifications:
Model
VMM-2515NC
VMM-3020NC
VMM-4030NC
VMM-5030NC
450 x 280mm
510 x 290mm
606 x 466mm
700x 450mm
306x 196mm
350x 280mm
450x 350mm
550 x 350mm
Travel: X,Y
250 x 150mm
300 x 200mm
400 x 300mm
500 x 300mm
Net Weight
120kg
200kg
240kg
500kg
Dimension
Z-axis travel:150mm
Work distance:108mm
X,Y-axis accuracy:(3+L/200)um
Video system
Object view-field:10.61.6mm
Contour and surface illumination: Ring LED and brightness can be setup
Power: AC110V/60Hz;220V/50Hz
Software: QuickMeasuring 4.1
Accessories:
1XCCD adapter(standard)
Zoom lens
0.74.5X
0.74.5X
Working distance
Zoom lens
Digital magnification
Visual field
Digital magnification
Visual field
0.5X(option)
1595X
203.2mm
7.548X
406.4mm
175mm
1X(standard)
30190X
10.6106mm
1596X
203.2mm
96mm
2X(option)
60380X
50.8mm
30190X
10.61.6mm
32mm
Recommended working cupboard: JT03U, loading350kg, dimension (length x width x height):1000 x600 x500(mm)
6.12
www.klass-messzeuge.ro
Characteristic:
2D Video measuring machine VMM-CI series are precise and effective
non-contact optical measuring instrument. It is composed of series of
accessories, such as Sony 1/2color CCD camera[ & adapter & capture
card ,Navitar zoom lens with coaxial illumination, linear scales, high
precise worktable, PC and monitor.
The QucikMeasuring software is able to control the brightness of 4-division
lightsource.TXT, Excel report output immediately, dxf drawing input
quickly.
Technical Specifications:
Model
VMM-1510CI
VMM-2010CI
VMM-2515P
VMM-3020CI
VMM-4030CI
354 x 228mm
404 x 228mm
450 x 280mm
510 x 290mm
606 x 466mm
210 x 160mm
260 x 160mm
306 x 196mm
350 x 280mm
450 x 350mm
Travel: X,Y
150 x 100mm
200 x 100mm
250 x 150mm
300 x 200mm
400 x 300mm
Net Weight
100kg
110kg
120kg
200kg
240kg
Dimension
540x560x850
Z-axis travel:150mm
Work distance:108mm
X,Y-axis accauracy:(3+L/200)um
Video system
Object view-field:10.61.6mm
Contour and surface illumination: Ring LED and brightness can be setup
Power: AC110V/60Hz;220V/50Hz
Software: QuickMeasuring 2.0
Accessories:
1XCCD adapter(standard)
0.74.5X
0.74.5X
Zoom lens
Working distance
Zoom lens
Digital magnification
Visual field
Digital magnification
Visual field
0.5X(option)
1595X
203.2mm
7.548X
406.4mm
175mm
1X(standard)
30190X
10.6106mm
1596X
203.2mm
96mm
2X(option)
60380X
50.8mm
30190X
10.61.6mm
32mm
www.klass-messzeuge.ro
6.13
Characteristic:
Creative modern-shape-design;
Fashionable auto-painting-craftwork ;
Steady granite base system;
Adjustable USB 4-division ring LED illumination;
Advanced Navitar 0.74.5X Zoom lens;
Wonderful SONY 1/2`` Color CCD camera
Powerful 2.5D measuring software QuickMeasuring 2.1 measuring
software.
Technical Specifications:
Model
Vexus VM3020
Vexus VM3030
Vexus VM4030
Vexus VM5030
450 x 350mm
450 x 450mm
550 x 450mm
650x 450mm
350x 250mm
350x 350mm
450x 350mm
550 x 350mm
Travel: X,Y
300x 200mm
300 x 300mm
400 x 300mm
500 x 300mm
Travel: Z-axis
200mm
200mm
200mm
200mm
Accuracy
Adjective objective
0.5X
1X
2X
Optical magnification
0.352.25X
0.74.5X
1.44.5X
Working distance
143187mm
8193mm
3437mm
Resolution
15.154.76um
7.252.35um
3.61.17um
17.162.67mm
8.581.33mm
4.290.76mm
22.853.56mm
11.421.77mm
5.710.89mm
Display System
TV Lines
Min .Illumination
Power Source
Dimension
Sony JT160
PAL
480
0.4Lux
DC 12V/AC24V
70 x 57 x 260
HAD CCD,C/CS-MOUNT)
6.14
www.klass-messzeuge.ro
Characteristic:
Creative modern-shape-design;
Fashionable auto-painting-craftwork ;
Steady granite base system;
Adjustable USB 4-division ring LED illumination;
Advanced Navitar 0.74.5X Zoom lens;
Wonderful SONY 1/2`` Color CCD camera;
Touchable Renishaw probe;
Powerful 2.5D measuring software QuickMeasuring 3.1 version.
Technical Specifications:
Model
Vexus VMP3020
Vexus VMP3030
Vexus VMP4030
Vexus VMP5030
450 x 350mm
450 x 450mm
550 x 450mm
650x 450mm
350x 250mm
350x 350mm
450x 350mm
550 x 350mm
Travel: X,Y
300x 200mm
300 x 300mm
400 x 300mm
500 x 300mm
Travel: Z-axis
200mm
200mm
200mm
200mm
Accuracy
0.5X
1X
2X
Optical magnification
0.352.25X
0.74.5X
1.44.5X
Working distance
143187mm
8193mm
3437mm
Zoom 1-6265
Resolution
15.154.76um
7.252.35um
3.61.17um
17.162.67mm
8.581.33mm
4.290.76mm
22.853.56mm
11.421.77mm
5.710.89mm
Display System
TV Lines
Min .Illumination
Power Source
Dimension
Sony JT160
PAL
480
0.4Lux
DC 12V/AC24V
70 x 57 x 260
HAD CCD,C/CS-MOUNT)
www.klass-messzeuge.ro
6.15
Characteristic:
Creative modern-shape-design;
Fashionable auto-painting-craftwork ;
Steady granite base;
Stable imported V-shape guide;
Precise metal and glass worktable;
High-speed 3-axis CNC driven motor;
Adjustable USB 40-division ring LED illumination;
Advanced Navitar 0.74.5X Zoom lens;
Wonderful SONY 1/2`` Color CCD camera;
Powerful 2.5D measuring software QuickMeasuring 4.1 version.
Technical Specifications:
Model
Vexus VMC3020
Vexus VMC3030
Vexus VMC030
450 x 350mm
450 x 450mm
550 x 450mm
650x 450mm
350x 250mm
350x 350mm
450x 350mm
550 x 350mm
Travel: X,Y
300x 200mm
300 x 300mm
400 x 300mm
500 x 300mm
Travel: Z-axis
200mm
200mm
200mm
200mm
Accuracy
Vexus VMC5030
Adjective objective
0.5X
1X
2X
Optical magnification
0.352.25X
0.74.5X
1.44.5X
Working distance
143187mm
8193mm
3437mm
Resolution
15.154.76um
7.252.35um
3.61.17um
17.162.67mm
8.581.33mm
4.290.76mm
22.853.56mm
11.421.77mm
5.710.89mm
Display System
TV Lines
Min .Illumination
Power Source
Dimension
Sony JT160
PAL
480
0.4Lux
DC 12V/AC24V
70 x 57 x 260
HAD CCD,C/CS-MOUNT)
6.16
www.klass-messzeuge.ro
Characteristic:
Modern shape design;
Fashionable auto-painting-craftwork ;
Steady granite base;
Stable imported V-shape guide;
Precise metal and glass worktable;
High-speed 3-axis CNC driven motor;
Adjustable USB 4division ring LED illumination;
Advanced Navitar 0.74.5X Zoom lens;
Wonderful SONY 1/2`` Color CCD camera;
Powerful 2.5D measuring software QuickMeasuring 2.1 version.
Technical Specifications:
Model
Worktable
Pomeas VML-5030
Pomeas VML-6040
Pomeas VML-6060
760 x 640mm
800 x 550mm
800x 800mm
550x 350mm
650x 450mm
650 x 650mm
Travel: X,Y
500 x 300mm
600 x 400mm
600 x 600mm
Z-axis travel:150mm
Work distance:108mm
X,Y-axis accuracy:(3+L/200)um
Video system
Digital magnification:10300X
Object view-field:10.61.6mm
Measuring
0.5X
1X
2X
Optical magnification
0.352.25X
0.74.5X
1.44.5X
Working distance
143187mm
8193mm
3437mm
Zoom 1-6265
Resolution
15.154.76um
7.252.35um
3.61.17um
17.162.67mm
8.581.33mm
4.290.76mm
22.853.56mm
11.421.77mm
5.710.89mm
Display System
TV Lines
Min .Illumination
Power Source
Dimension
Sony JT160
PAL
480
0.4Lux
DC 12V/AC24V
70 x 57 x 260
HAD CCD,C/CS-MOUNT)
www.klass-messzeuge.ro
6.17
Characteristic:
Modern shape design;
Fashionable auto-painting-craftwork ;
Steady granite base;
Stable imported V-shape guide;
Precise metal and glass worktable;
High-speed 3-axis CNC driven motor;
Adjustable USB 4division ring LED illumination;
Advanced Navitar 0.74.5X Zoom lens;
Wonderful SONY 1/2`` Color CCD camera;
Powerful 2.5D measuring software QuickMeasuring 4.1 version.
Technical Specifications:
Model
Worktable
760 x 640mm
VML-6060CNC
VML-1080CNC
VML-1210CNC
1140 x 1000mm
1140x 1360mm
800x 800mm
550x 350mm
1050x 850mm
1050 x 1250mm
650 x 650mm
600 x 600mm
1000 x 800mm
1000 x 1200mm
600 x 600mm
Z-axis travel:200mm
Work distance:92mm
X,Y-axis accuracy:(3+L/200)um
Video system
Digital magnification:10300X
Object view-field:10.61.6mm
Measuring
0.5X
1X
2X
Optical magnification
0.352.25X
0.74.5X
1.44.5X
Working distance
143187mm
8193mm
3437mm
Zoom 1-6265
Resolution
15.154.76um
7.252.35um
3.61.17um
17.162.67mm
8.581.33mm
4.290.76mm
22.853.56mm
11.421.77mm
5.710.89mm
Display System
TV Lines
Min .Illumination
Power Source
Dimension
Sony JT160
PAL
480
0.4Lux
DC 12V/AC24V
70 x 57 x 260
HAD CCD,C/CS-MOUNT)
6.18
www.klass-messzeuge.ro
QG-15
QG-13
50 x 50 mm
35 x 35 mm
300232
250232
Rotate speed
2800r/min
Electromotor
Y90L-2,2.6KW, 380V,
Y802-2,
50Hz
380V, 50Hz
1.2KW,
Dimensions
740465390mm
650 400350mm
Net Weight
70Kg
55Kg
Technical specification:
Max. Cutting Width: 60mm
Max. Cutting Height: 80mm
Max. Cutting Diameter:50mm
Specifications of Abrasive Wheel: 250 2 32 mm
Weight: 130kg
Technical specifications:
Maximum cutting section: 120120mm (QG-5);
100100mm (QG-5A)
Rotary cutting speed: 2800r/min
Cutting disk size: 400332mm(QG-5);
3502.532mm(QG-5A)
Cutting power: 4KW/380V/50Hz
Machine Dimensions: 7608501400mm (QG-5)
8006601380mm (QG-5A)
Net weight: 380Kg (QG-5); 315Kg (QG-5A)
www.klass-messzeuge.ro
7.1
Technical Specifications:
Maximum cutting diameter: 80mm (Q-80Z); 100MM (Q-100B)
Maximum cutting capacity: 80x200mm (Q-80Z); 100x200mm (Q-100B)
Rotary cutting speed: 2100r/min
Cutting disk size: 3502.532mm
Power supply: 3 phases / 4wires/380V/50Hz
22.2kw (Q-80Z); 23kw (Q-100B)
7.2
Specifications:
Single disc Polisher/Grinder MP-1B
Technical Specifications:
Dimension: 690715310mm
Dimension: 615380270mm
www.klass-messzeuge.ro
Technical Specifications:
Model
Plate number
Diameter of plate
Rotate speed
MoPao 160
200/250mm
150/300
MoPao 260
200/250mm
(dual-speed)
Remark
380v/50Hz three phases
380v/50Hz three phases
MoPao 300
300mm
MoPao 160E
200/250mm
MoPao 260E
200/250mm
(stepless
220v/50Hz
MoPao 300E
300mm
speed change)
220v/50Hz
MoPao 2DE
200/250mm
MoPao 2D
200/250mm
50-600
150/300
220v/50Hz
220v/50Hz;
control system
www.klass-messzeuge.ro
7.3
Specifications:
Diameter of grinding disc: 250mm
Power: 550W/380V50Hz
Dimension: 700610330mm
Net weight: 80Kg
Dimension: 700610330mm
Net weight: 80Kg
7.4
www.klass-messzeuge.ro
Diameter of mould
inlaying time
cooling time
Formaldehyde
22
10ml
130
10min
15min
Molding power
30
20ml
130
10min
15min
white
45
35ml
130
10min
15min
Ebonite power
(black)
Heating temperature
22
10ml
135-150
8min
15min
30
20ml
135-150
8min
15min
45
35ml
135-150
8min
15min
www.klass-messzeuge.ro
7.5
Metallurgical Consumables
Applications:
Diamond polishing aerosol of all kinds of graininess,
luminum,
(W0.5,W1,W2.5,W3.5,W5,W7,W10,W14
Alumina (W1,W3,W5,W7)
Chromium oxide(W1,W3,W5,W7)
( W0.5,W1,W2.5,W3.5,W5,W7,W10,W14)
It is used for cutter, and primary suitable for non-ferrous material, such as copper,
aluminum, zinc, titanium, tungsten etc.
White emery grinding discs:
It is used for cutter, and primary suitable for metal material, alloy, steel, cast steel
etc. That is the medium hardness material, and the hardness is 60 degree.
Chromium emery, single-crystal emery grinding discs:
It is used for cutter, and primary suitable for high speed tool steel, hard alloy,
bearing steel, special ductile cast iron, the high hardness and flammable materials,
and the hardness is 90 degree.
300mm
Lithofacies diamond grinding wheels:
7.6
www.klass-messzeuge.ro
Model
Programmable
Temperature
Main Specification
THC-P
Controller
controller
TC-P
Original
control
programmable controller
THC
TC-L
Humidity Chamber
Programmable
Temperature
Chamber
importing
temperature
value control
Original importing controller
value control
Specification:
Model
1 25
40
80
100
12
25
40
80
10
2 5
00
120
D
25
40
800
0
Temp. Range
-0C-100C (150 C)
Humidity Range
-20C-100C (150 C)
Temp Constancy
1C
Temp Uniformity
-40C-100C (150 C)
120
25
40
80
0
-60C-100C (150 C)
5%-98% RH (M)
Heat Up Time
Interior Dimensions
Exterior
Dimensions
Interior Material
Exterior Material
Insulation mterial
Refrigeration
Single-stage, original imported closed compressor / Two steps, original imported closed compressor
System
Power Supply
AC380V / 3P / 50HZ
www.klass-messzeuge.ro
8.1
Specification:
Model
72P
100P
150P
252P
480P
Controller
-40C-150C
In 5 Min
72S
100S
150S
72Z
150Z
-55C-150C
-65C-150C
60C-200C
60C-200C
60C-200C
-65C-0C
-70C-0C
-75C-0C
10
15
25
25
45
50
60
70
80
45
50
60
45
50
60
40
45
50
60
80
40
45
50
40
45
50
40
45
50
60
75
40
45
50
40
45
50
Interior Material
Exterior Material
function when the water level is low, and the testing would not be
interrupted.
The high precision vitreous nozzle makes the diffusion equably, and
lead the mist, adjust the mist and Spray the mist equably etc.
Specification:
8.2
100Z
Model
SSC-60
SSC-90
Test Size (W x H x D)
60 x 40 x 45 cm
90 x 50 x 60 cm
External Size (W x H x D)
125 x 105 x 91 cm
Temperature Range
www.klass-messzeuge.ro
www.klass-messzeuge.ro