Você está na página 1de 4

1.

Crater wear occurs mainly on the face of the cutting tool at a short distance
from the cutting edge only

2. Drilling is an example of oblique cutting.


3. The maximum production of small and slender parts is done by multispindle automatic lathe
4. Cast iron during machining produces discontinuous chips
5. The average cutting speed for turning brass with a high speed steel tool is 60 to 90 m/min
6. A single point thread cutting tool should ideally have zero rake angle.
7. If the diameter of the hole is subject to considerable variation, then for locating in jigs and fixtures, the
pressure type of locator used is conical locator
8. The tool made of cemented carbide wear out faster at slow speeds
9. The work or surface speed for cylindrical grinding varies from 20 to 30 m/min
10. The method of grinding used to produce a straight or tapered surface on a workpiece, is external
cylindrical grinding
11. Internal gears can be made by shaping with pinion cutter
12. The lip angle of a single point tool is usually 60 to 80
13. The correct sequence of tool materials in increasing order of their ability to retain their hot hardness is
cermet, carbide, ceramic, borazon
14. The different spindle speeds on a lathe form geometrical progression
15. The lathe spindles are usually made hollow and provided with internal taper
16. For softer materials, the point angle of the drill is kept less than 118
17. High speed steel drills can be operated at about double the speed of high carbon steel drills.
18. In machining metals, chips break due to work hardening of work material.
19. In a shaper, the length of stroke is increased by increasing the centre distance of bull gear
and crank pin
20. When the end of a tap is tapered for about three or four threads, it is known as a second tap

21. In metal machining, the work-tool contact zone is a zone where heat is generated due to burnishing
friction
22. The factor responsible for the formation of continuous chips with built up edge is low cutting
speed and small rake angle
23. The abrasive recommended for grinding materials of high tensile strength is aluminium oxide

24. Glazing in grinding wheels can be decreased by using a softer wheel or by decreasing the
wheel speed
25. The method of centreless grinding used to produce taper is endfeed grinding
26. The angle on which the strength of the tool depends is rake angle
27. In grinding irregular, curved, tapered, convex and concave surfaces, the grinder used is surface
grinder
28. In centreless grinders, the maximum angular adjustment of the regulating wheel is 10
29. The type of reamer used for reaming operation in a blind hole, is right hand spiral fluted reamer
30. The trade name of a non-ferrous cast alloy composed of cobalt, chromium and tungsten is called
satellite

31.

This is a solid shape that fits inside the mold and forms a hole in
a cooled cast metal or molten plastic object:
A.

Core

B.

Cavity

C.

Prototype

D.

Hole mold

Você também pode gostar