Escolar Documentos
Profissional Documentos
Cultura Documentos
Q2.
Q3.
Q4.
Q5.
Q6.
Q7.
Q8.
Q9.
Q10.
Q11.
Q12.
Q13.
Q14.
Q15.
Q16.
Q17.
Q18.
Q19.
Q20.
Q21.
Q22.
Q23.
Q24.
Q25.
Q26.
Q27.
Q28.
Q29.
Q30.
Q31.
Q32.
Q33.
Q34.
Q35.
Q36.
Q37.
Q38.
Q39.
Q40.
Q41.
Q42.
Q43.
Q44.
Q45.
Q46.
Q47.
Q48.
Q49.
Q50.
1. No. 6 inch
2. inch - 9/16 inch
3. Stainless steel
Use the elastic stop nut where temp is
1. 2490F
2. 2510F
3. 3000F
4. 2600F
Identify the bolt
1. Special bolt
2. Special bolt
3. Reworked bolt
4. clevis bolt
Internal wrenching bolt takes
1. Tension
2. Shear
3. Compression
4. Both 1 & 2
Which washer is used under wooden structure
1. AN 960
2. AM 970
3. AN 345
4. None of the above
Identify the bolt
1. Counter-sank head bolt
2. Internal hex bolts
3. Standard head bolt
4. None
Clase tolerance bolt is used where
1. Light drive fit is required
2. Light drive fit is required
3. Both 1 & 2
General types of self locking nuts are
1. All metal type
2. Fiber lock type
3. Both 1 & 2
AN 970 indicates it is
1. Nut
2. Washer
3. Bolt
4. Screw
(a) Used under high vibration condition
(b) Used only once
Which washer has both 1 & 2 as its property
1. Shake proof lock washer
2. Lock washer
3. Plain washer
AC 950 and AC 955 washers are used
1. Where a bolt is installed at an angle
2. Where perfect alignment with surface in required
3. Either 1 or 2
4. None
Which action of the washer AN 935 provides enough friction to prevent loosening of nut fram vibration
1. Lock action
2. Spring action
3. Fibre action
4. All are correct
In part number AN 310 D 5R 5 indicates
1. Nut diameter in 5/16 inch
2. Nut diameter in 5/8 inch
3. Nut diameter is 1/16 inch
Grip length is
1. Greater than the thickness of material being bolted together
2. Less than the thickness of material being bolted together
3. Equal to the thickness of material
Boots self locking nut is
1. One piece
2. Three piece
3. As in 1 and all metal construction
A/c nuts are obtained with
1. Right hand threads
2. Left hand threads
3. Either 1 or 2
4. None
Lock bolt combines the features of
1. Nut and bolt
2. Bolt and rivet
3. Bolt & washer
4. Bolt & screw
Which type of lock bolt Sheet pull together characteristic
1. Blind type
2. Stump type
3. Pull type
The fit of holes and bolts is defined in terms of
1. Shaft & hole diameter
2. Friction between bolt & hale
3. Both 1 & 2
Which washer is used on wooden structures
1. AN 960
2. AN 970
3. AN 950
4. AN 955
MTCS
1. Elastic stop nut is unaffected by carbon tetrachloride
2. Self locking nut needs external device to be secured
3. Non- self locking nut do not need external device to be secured
4. All are correct
Jo- Bolts series available are
1. 201, 261, 313, 376
2. 300, 360, 380, 340
3. 200, 260, 312, 375
Which series of bolts is interchangeable
1. AN 3 and AN 73
2. AN 5 and AN 75
3. AN 4 and AN 24
4. AN 9 and AN 79