Você está na página 1de 21

1 2 3 4

JETRIKE - MkII A

An Open Design
Copyright (c) 2007, Henry Thomas
All rights reserved.
B B
Acknowledgments: thanks to 25mhz, Dirk Bonne, George Durbridge and Carl Punton for their suggestions.

Redistribution and use of plans, with or without modification, are permitted provided that the following
conditions are met:

1. Redistributions of plans must retain the above copyright notice, this list of conditions and the
following disclaimer.

2. Neither the name of Henry Thomas or JETRIKE nor the names of any contributors may be used to
C endorse or promote products derived from these plans without specific prior written permission. C

THESE PLANS ARE PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, INJURY OCCASIONING BODILY HARM OR
DEATH; LOSS OF PROFITS; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
D IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) D
ARISING IN ANY WAY OUT OF THE USE OF THESE PLANS, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

1 2 3 4
1 2 3 4

Specifications
A A

Right Swing Arm

Seat Brace
B B
Left Swing Arm

Handle Bars

Seat Frame

Tiller

C Frame C
Rocker Arm
Forks Steering Pivot

Boom
JETRIKE.COM AN OPEN DESIGN
Redistribution and use of these plans in
electronic or printed form, are permitted
Bottom Bracket Mount Title provided all the conditions of the open design
FWD Tilting Recumbent Trike license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.
Right Dropout Size Dwg. No. Rev Material: C450 Finish: Painted

Left Dropout A4 MkII A Weight: 12.8kg Do Not Scale Drawing

Scale 1:10 Sheet 2 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

30 12
6 Item 43 Item 9
A BB Mount BB Mount A
Binder Sleeve

20

15
40

10
36

12
R6
B B

68

39.7
1.37 Item 1
34.8 Bottom Bracket Shell
1.37 x 24 TPI

39
.7
C
Tap with 40 C
M6 Thread
39.7
12

JETRIKE.COM AN OPEN DESIGN


Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
BB Mount license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

Size Dwg. No. Rev Material: C450 Finish: Painted


14 14
A4 MkII A Weight: 260g Do Not Scale Drawing

Scale 1:1 Sheet 3 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

36 .4 19
.2 23
A A

145.8
369.5
.8
24

66.5°
.5°
45°

50

7.
5
7.
B B

5
A

25
.5
12
Item 10

40
SHS 40 x 2.5mm Item 45
Square 12mm

12
5
Item 14 VIEW A

25
SHS 35 x 1.6mm
C Item 34 C

20
Item 15 Flat 40 x 6mm

35
Item 30

Item 29
JETRIKE.COM AN OPEN DESIGN
Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
Item 28
Item 24 Drive Train license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.
SHS 25 x 1.6mm
Item 27 Size Dwg. No. Rev Material: C450 Finish: Painted

Item 26 A4 MkII A Weight: 3597g Do Not Scale Drawing


Item 25
Scale 1:4 Sheet 4 of 21 Drawn by: Henry Thomas
1 2
1 2 3 4

186.6
A A

13.5°
8.4 Item 15 15.2

8.4
163

23.5°
13.5°

0
B B

R2
40 0.50
12.7

20
498.4
506.9

20

Item 10

85

Item 34
73
Item 14

C C

40

JETRIKE.COM AN OPEN DESIGN


Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
Drive Train license are met. See Page 1 for details.
D 35 © Henry Thomas 2007, All Rights Reserved.

Size Dwg. No. Rev Material: C450 Finish: Painted


A4 MkII A Weight: 3597g Do Not Scale Drawing

Scale 1:2 Sheet 5 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

45°

25
19.8°

25

25
45°

45°
A A

63.6
Item 26

60.1
25

22.5°
22.5°

45

25
°
218.1

24.7
28.3

10.4

10.4
B Item 24 Item 28 B
25 Item 27

243.1
121.6
22.5°
10.4 232.7
Item 25
C Item 27 10.4 C
111.2

22.5° 243.1
122.7

Item 25
9 JETRIKE.COM AN OPEN DESIGN
Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
113.8 Drive Train license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

Size Dwg. No. Rev Material: C450 Finish: Painted


19.8°
A4 MkII A Weight: 3597g Do Not Scale Drawing

Scale 1:2 Sheet 6 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

383.4
A 27° A

49.1 Item 29

334.3 2
39.

25

6
19
30.3

25

50
B B
Item 45

12
50 12
84.1
Item 30
53.7

Tap with
C C
M6 Thread

JETRIKE.COM AN OPEN DESIGN


Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
Drive Train license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

Size Dwg. No. Rev Material: C450 Finish: Painted


A4 MkII A Weight: 3597g Do Not Scale Drawing

Scale 1:2 Sheet 7 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

Item 32
Flat 40 x 6mm
A A

40 40

45°
45°

55

55
Item 33

62.5
B B
62.5

12.5
R5 R5

20
29.5

12.5
M10 x

10
1mm
34

C 20 C
12
10

R8
2
R1

JETRIKE.COM AN OPEN DESIGN


Redistribution and use of these plans in
25.5 Title
electronic or printed form, are permitted
provided all the conditions of the open design
Dropouts license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

Size Dwg. No. Rev Material: C450 Finish: Painted


A4 MkII A Weight: 258g Do Not Scale Drawing

Scale 1:1 Sheet 8 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

R6
A A

0
200

84

0
.9

12
B ° B

0.8
7
22 5
.22
5

60°

C C
Item 4

JETRIKE.COM AN OPEN DESIGN


Redistribution and use of these plans in
electronic or printed form, are permitted
Item 5 Title provided all the conditions of the open design
Handle Bars license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

Size Dwg. No. Rev Material: C450 Finish: Painted


A4 MkII A Weight: 458g Do Not Scale Drawing

Scale 1:2 Sheet 9 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

Item 31
A Gusset Item 40 SHS 25 x 1.6mm A
Plate 38 x 52 x 3mm

Item 2
CHS Nominal Bore 32mm
Extra Heavy

B Item 37 B

.6
12
Item 11 Item 36
SHS 40 x 1.6mm Item 17
Item 35
Flat 32 x 5mm
.5°
37
Item 13 Item 16
C Item 12 SHS 35 x 1.6mm C

7
2.5

JETRIKE.COM AN OPEN DESIGN


Redistribution and use of these plans in
16°

electronic or printed form, are permitted


Title provided all the conditions of the open design
Frame license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

120 Size Dwg. No. Rev Material: C450 Finish: Painted


16.5

A4 MkII A Weight: 3362g Do Not Scale Drawing

Scale 1:4 Sheet 10 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

37
35

.5°
35
A A

17.5

15.4
B

Item 16
73
35

46.1
Item 11

Item 11

20.3
17.5
332.2

330.3
173.4

B B
52
DETAIL B
SCALE 1 : 1
8
40 40 °
49

37.1
°
70
Item 13
28

35

20.4
16°
35°

C C

5
30.2
70

20.1
Item 40 40
35°
184.4
JETRIKE.COM AN OPEN DESIGN
Redistribution and use of these plans in
electronic or printed form, are permitted
28 Item 12 Title provided all the conditions of the open design
Frame license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

Size Dwg. No. Rev Material: C450 Finish: Painted


212.4 A4 MkII A Weight: 3362g Do Not Scale Drawing

Scale 1:2 Sheet 11 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

35

25
436.1
A A

18.3°
75.4 8.3
Item 31

352.4
.3°
18

8
313

57.5
B 50 B
0. 12.7
Item 17

20.5

32
Item 35

Item37
Item 36
112

32

80
R1
C 6 C
73.5
27.5

27.5
43.5

JETRIKE.COM AN OPEN DESIGN


Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
Frame license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

6 6
R1 R1
Size Dwg. No. Rev Material: C450 Finish: Painted
0.50

0.50

A4 MkII A
12.7

12.7

Weight: 3362g Do Not Scale Drawing

Scale 1:2 Sheet 12 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

6003 or 7003
A Bearing Housing A
OD 35mm
42.4 17 ID 17mm
W 10mm

10

10
Item 42
Round 20mm

B B

50
70

50

10
10

C Item 2 C
CHS Nominal Bore 32mm
Extra Heavy
0.50
32.6 12.7

17
37 JETRIKE.COM AN OPEN DESIGN
Redistribution and use of these plans in
20 Title
electronic or printed form, are permitted

2.4
provided all the conditions of the open design
4 Steering Pivot license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

Size Dwg. No. Rev Material: C450 Finish: Painted


A4 MkII A Weight: 366g Do Not Scale Drawing

Scale 1:1 Sheet 13 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

5
R1
17.5
A A

Item 19

30
2.5
8

Item 3
17.5
35
B 35 B

12
7.5

Item 18
82.3
200
290
260

.9
R16

C C

8
2.5

JETRIKE.COM
30

AN OPEN DESIGN
Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
Rocker Arm license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

17.5 Size Dwg. No. Rev Material: C450 Finish: Painted


A4 MkII A
R1

Weight: 750g Do Not Scale Drawing


5

Scale 1:2 Sheet 14 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

R8
Bearing Housing
A OD 1 1/8" A
24.7 ID 1/2"
W 5/16"

1.125
28.57
5

33
.7 B
B
33.7

2.563
0.3125
24.7 7.938 Item 3
CHS Nominal Bore 25mm
4.5 Extra Heavy
70

C C
0.3125
7.938

33.7

JETRIKE.COM AN OPEN DESIGN


Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
1.125 Swing & Rocker Pivot license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.
28.575
Size Dwg. No. Rev Material: C450 Finish: Painted
A4 MkII A Weight: 205g Do Not Scale Drawing

Scale 1:1 Sheet 15 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

17.5
A A
84.5
Endcap Item 41
Item 23 Plate 35 x 35 x 1.5mm 15

R16.
9
Item 20

Item 43
Round 20mm 55
30 R1
B
7° 5
B
Item 22

2.5
35
Item 21 14

C 20 C

Item 43

Item 20 Item 3
SHS 35 x 1.6mm CHS Nominal Bore 25mm
Extra Heavy
JETRIKE.COM AN OPEN DESIGN
Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
Swing Arm license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

Size Dwg. No. Rev Material: C450 Finish: Painted


A4 MkII A Weight: 951g Do Not Scale Drawing

Scale 1:2 Sheet 16 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

A A

17.5
35
22.5 17.5
°
244.3
229.8

Item 23

69
83.5
14.5 Item 22 14.5

Item 23
B B

22.5°
229.8

20
35

14.5
22.5°
14.5

C C
22.5°

Item 21

66
51.5

JETRIKE.COM AN OPEN DESIGN


Redistribution and use of these plans in
electronic or printed form, are permitted
Item 21 Title provided all the conditions of the open design

35 Swing Arm license are met. See Page 1 for details.


D © Henry Thomas 2007, All Rights Reserved.
R16.9

Size Dwg. No. Rev Material: C450 Finish: Painted


A4 MkII A Weight: 951g Do Not Scale Drawing

Scale 1:2 Sheet 17 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

Item 6 [0.375]
A A
Tube OD 3/4 x 0.064" R9.5

22.5°
Item 7

7.9
Item 8

Item 8

90.2
Item 8

75.9
83.8
30
Item 39 3
B B

40

20
Item 38
Flat 20 x 5mm 20
5
C C
0.75
R1 19.1
0
Item 39
Item 38

40
50
47.6
45.1

JETRIKE.COM AN OPEN DESIGN


Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
Seat license are met. See Page 1 for details.
D R1 © Henry Thomas 2007, All Rights Reserved.
8 0 R1 Size Dwg. No. Rev Material: C450 Finish: Painted
0
8

20 10 A4 MkII A Weight: 2332g Do Not Scale Drawing

Scale 1:1 Sheet 18 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

450

A A

Item 7

85
0.37

120
R9.5

50
5

°
45°

50
B B
116.6

0
19

21°
230
460

10°
C C

50

Item 6
JETRIKE.COM AN OPEN DESIGN
Redistribution and use of these plans in
electronic or printed form, are permitted
Title provided all the conditions of the open design
Seat license are met. See Page 1 for details.
D © Henry Thomas 2007, All Rights Reserved.

Size Dwg. No. Rev Material: C450 Finish: Painted


A4 MkII A Weight: 2332g Do Not Scale Drawing

Scale 1:3 Sheet 19 of 21 Drawn by: Henry Thomas


1 2
1 2 3 4

23
A 22 A

21

20
19
45
18
44
B
13 B
17
43
12
16 8 39
42

15 11 7 38
41 31
14 10 6
C C
5 30
37
40
4 29
9 36
3 28 35
2
27 34
1 26 33
D D
24 25 32

1 2 3 4
ITEM NO. DESCRIPTION QTY. LENGTH TOTAL
1 BB Shell 1.37 x 24 TPI 1 68
2 CHS Nominal Bore 32mm Extra Heavy 1 70 70
3 CHS Nominal Bore 25mm Extra Heavy 3 70 210
4 Tube OD 7/8 x 0.064 inch 1 200 200
5 Tube OD 7/8 x 0.064 inch 1 365.7 365.7
6 Tube OD 3/4 x 0.064 inch 2 807.3 1614.6
7 Tube OD 3/4 x 0.064 inch 3 482.8 1448.4
8 Tube OD 3/4 x 0.064 inch 2 90.2 180.4
9 SHS 40 x 40 x 2.0mm 1 40 40
10 SHS 40 x 40 x 2.0mm 1 73 73
11 SHS 40 x 40 x 1.6mm 1 358.8 358.8
12 SHS 40 x 40 x 1.6mm 1 212.4 212.4
13 SHS 40 x 40 x 1.6mm 1 72.8 72.8
14 SHS 35 x 35 x 1.6mm 1 506.9 506.9
15 SHS 35 x 35 x 1.6mm 1 186.6 186.6
16 SHS 35 x 35 x 1.6mm 1 73 73
17 SHS 35 x 35 x 1.6mm 1 313 313
18 SHS 35 x 35 x 1.6mm 1 82.3 82.3
19 SHS 35 x 35 x 1.6mm 1 290 290
20 SHS 35 x 35 x 1.6mm 2 100 200
21 SHS 35 x 35 x 1.6mm 2 66 132
22 SHS 35 x 35 x 1.6mm 2 244.3 488.6
23 SHS 35 x 35 x 1.6mm 2 83.5 167
24 SHS 25 x 25 x 1.6mm 2 63.6 127.2
25 SHS 25 x 25 x 1.6mm 2 122.7 245.4
26 SHS 25 x 25 x 1.6mm 2 161.7 323.4
27 SHS 25 x 25 x 1.6mm 2 243.1 486.2
28 SHS 25 x 25 x 1.6mm 2 60.1 120.2
29 SHS 25 x 25 x 1.6mm 1 383.4 383.4
30 SHS 25 x 25 x 1.6mm 1 84.1 84.1
31 SHS 25 x 25 x 1.6mm 2 436.1 872.2
32 Flat 40 x 6mm 1 96.5 96.5
33 Flat 40 x 6mm 1 75 75
34 Flat 40 x 6mm 2 85 170
35 Flat 32 x 5mm 2 73.5 147
36 Flat 32 x 5mm 2 112 224
37 Flat 32 x 5mm 2 43.5 87
38 Flat 20 x 5mm 2 45.1 90.2
39 Flat 20 x 5mm 2 50 100
40 Gusset Plate 38 x 52 x 3mm 2 38 x 104
41 Endcap Plate 35 x 35 x 1.5mm 3 35x 105
42 Round 20mm 1 70 70
43 Round 20mm 2 35 70
44 Square 12mm 2 14 28
45 Square 12mm 2 11.5 23
TOTALS Tube OD 7/8 x 0.064 inch 565.7
Tube OD 3/4 x 0.064 inch 3243.4
SHS 40 x 40 x 2.0mm 113
SHS 40 x 40 x 1.6mm 644
SHS 35 x 35 x 1.6mm 2439.4
SHS 25 x 25 x 1.6mm 2642.1
Flat 40 x 5mm 341.5
Flat 32 x 5mm 458
Flat 20 x 5mm 190.2
Round 20mm 140
Square 12mm 51

Você também pode gostar