Você está na página 1de 8

CHARGETEC

Heavy-duty charging vehicle for mining


and tunneling operations

TAKE CHARGE

THE CHARGETEC IS ONE OF THE MOST TECHNICALLY ADVANCED


CHARGING TRUCKS OF ITS KIND, WITH MORE THAN A DECADE
OF TESTING AND DEVELOPMENT BEHIND IT. WITH MULTIPLE
BOOM AND CHARGING VESSEL OPTIONS AVAILABLE, IT GETS
THE JOB DONE.

Telescopic boom with a service platform


made of stainless steel

MAIN BENEFITS
Productivity. Three different
pressure points allow for an
accurate charging density and
a precise blast result.
Flexibility. Three boom and
basket systems and a remote
charging boom to cover all
your needs.
Safety. Rear camera with
monitor, strobe lights and
reverse alarm standard
on all vehicles to ensure
visibility.

Articulated frame steering. 4-wheel drive


2

Camera and monitor in cabin

All vital parts of the ANOL


CC made of stainless steel

Convenient and accessible


service points
3

CHARGETEC FROM ATLAS COPCO


THE CHARGETEC IS A HEAVY-DUTY CHARGING VEHICLE FOR MINING
AND TUNNELING OPERATIONS, BUILT TO MEET THE HIGHEST DEMANDS
FOR FUTURE BLASTING TECHNOLOGY.

+ PRODUCTIVITY
To keep productivity high, the Chargetec has been equipped with the
latest generation of charging vessels; the ANOL CC. Three pressure
points ensure optimized density for efficient and high-speed charging
in all directions. All vital parts of the ANOL CC are made of stainless
steel for extended machine life.

+ FLEXIBILITY
The ANOL CC charging vessel is available in volumes of 500, 750 or
1,000 liters, which makes the Chargetec suitable for a wide range of
operations. Thanks to four different boom options, the Chargetec can
operate in most types of drifts and handle charging in up to 115 mm
hole diameter.

+ SAFETY
The Chargetec has been designed to meet the latest safety standards
and requirements. Rear camera and cabin monitor allow for full
operator overview. A FOPS approved cabin protects the operator and
passengers. Additional safety standards on the Chargetec include:
two point safety belts, two portable fire extinguishers, ANSUL fire
suppression system and emergency stop button.

ATLAS COPCO SERVICE


Atlas Copco optimizes delivery of quality spare parts,
as well as superior service to all customers in the
mining and rock excavation industry. We act as
the most competent speaking partner in matters
regarding operations of your equipment.
This enhances your productivity, profitability, and
peace of mind, ensuring successful sustainable
business relationships.

STANDARD FEATURES
CHARGING SYSTEM

BOOM AND BASKET SYSTEM

ANOL CC charging vessels in volumes of 300, 500, 750 or 1000 liters

RSP10, RSP 20, RSP 25

Charging capacity of up to 130 kg/minute with high density

Boom can be operated from both seat and basket

Crystalined, prilled or of this mixed ANFO can be charged in all directions


and different hole sizes

Start/stop from basket


Detonator box in basket

Air supply for charging to be by onboard compressor or by external air supply.

OPERATING SYSTEM

CARRIER

Instruments: fuel gauge, emergency stop, warning lights

UV heavy duty carrier

Engine display Articulated frame steer

Articulated frame steering, 4-wheele driveArticulated frame steer

Camera and monitor

Low emission, turbo-charged, water cooled 4 cylinder engine

Brake lights

Jacks for stability set-up Jacks for stable set-up

BRAKE SYSTEM

CANOPY

Service brakes with inboard wet disc

FOPS II-Approved canopy

Emergency/parking brakes: SAHR (Spring Applied Hydraulic Released)

Operators seat for trammingArticulated frame steer


Drivers seat is supplied with adjustable armrests and a two point safety belt
Fire Extinguisher 1 portable 2 kgJacks for stable set-up

TRANSMISSION
Dana/Clark, full powershift transmission with torque converter and gear box with 3 stages
forward and reverse gear box through hydraulic wet disc clutches

GENERAL
High speed
Easy to service and maintenance
Hill climbing ratio: 1:4
Articulated steering
Accurate, rapid and simple positioning of the service boom and basket

TECHNICAL SPECIFICATIONS
CARRIER

TRANSMISSION

Engine

Engine Deutz TCD 2013 L42V

Hydrodynamic transmission

DANA Clark 24000

Torque at 1,500 rpm

600 Nm

Axles

DANA Spicer 112/138

Hydraulic jacks, boom end

2Jacks for stable set-up

Joy stick controlled boom

PVG32 valves

VOLUME DATA

Fire extinguisher

1 x 2 kg

Fuel tank

170 liters

Hydrostatic power steering system

Hydraulic tank

Approx. 228 l

Stairs for platform

Engine with oil filter

15.5 liters

Manual central lubrication nipple

Transmission

30 liters

Spirit levels, one for longitudinal and one for sideway

Axles including planetary gear

20 dm3

FUNCTIONAL DATA

Voltage

ELECTRIC SYSTEM

Ground clearance

322 mm

24 V

Battery capacityArtic 2 x 12 V, 70 Ah

Height from ground to first step in canopyAd f~ 400 mm

Headlight front

Drive

4x4

Headlight rear

4 x 70 W, Halogen Jacks for stable set-up

Hill climbing ability

1:4 / 14 / 25%Ja

Working light

4 x 70 W, Halogen

Rims

8.00 x 20

Loud-tone horn

335 Hz, 116 dBA, 1 x 60 W

Tyres

12.00 x 20

Cable

Flame retardant

Steering angle

+/- 40

Oscillation

+/- 12

Service brakes

2 separate circuits

Emergency and parking brakes

SAHR

ELECTRIC POWER PACK SYSTEM

ENGINE
Manufacturer

4 x 70 W, Halogen

Deutz

Main motor

11 kW

VoltageArtic

400 1000 V

Frequency

50 60 Hz

Cable

See below tableJacks for stable set-up

Cable

TypeAd

TCD 2013 L42V

Stage

IIIA

Design

4 cylinder in line water cooled and silencerJa

Torque at 1,400 rpm


Max Power

120 kW (161 hp) @ 2300 rpm

Piston displacement

4.76 liters

Compression ratio

17.6:1

Aspiration

Turbocharger

Generator capacity

Standard 28V, 80Amp

Air filter

Standard air filter

Cyclonic Air filter.

Option

Fuel consumption @ 100% efficiency

209 g/kWh = 0.17 L/kWh

Recommended fuel (Warranty cover)

ASTM D 975:1D-2D 2

Voltage

Type

Dimension, mm2

Diameter, mm

400-690 V

Buflex

3x35+3G6

24.0/26.5

1000 V

Buflex

3x35+3G6

20.5/23.0

COMPRESSOR
Electrical

GAR37, 4,3 m3/min @ 7 bar


Electric Motor, 30 kW

Diesel hydraulic

GAR37, 4,3 m3/min @ 7 bar


Hydraulic Motor 30 cm3 130 l/min @180 bar

Optional equipment
CARRIER
Engine

Cummins

SPEED, FORWARD AND REVERSE

Head lights

40W Led Articulated frame steer

Gear 1

Working lights

40W Led

6.1 km/h

Gear 2 Ad

12.7 km/h

Diesel hydraulic (these options exclude El. Hydraulic)Jacks for stable set-up

Gear 3

26.8 km/h

Cabin

FOPS II-Approved cabin including:


Air conditioner, Rubber damped for comfort during tramming

Side view

2590
(With
canopy)

2819

2660
(With
cabin)

12
2749

3700
4149

13

322
1371
3671

BOOM OPTIONS

ANOL CC
TECHNICAL FEATURES

RSP10

For blast holes with diameters 25 to 150 mm

Number of vessels

1 or 2 incl. on board compressor

Charging in all directions. In up-holes, up to 100 mm diameter, with the jet function activated

Lifting in basket

300 kg

Charging density between 0,9 and 1,1 kg/cc

Lifting height

7000 mm

Charging capacity up to 130 kg per minute

Rotation

+/- 45Jacks for stable set-up

Remote controlled operation

Basket size (WxL)

Compact design

Jacks at boom end

All vital parts of the Anol CC are made of stainless steel

Options

The ANOL CC unit is manufactured according to regulations for pressure vessels

FOPS roof on service boom basket

Approved for use by the Swedish National Board of Occupational Safety and Health

Stainless service boom basket

1437 x 1414 mm
Fixed

Charging capacity

<130 kg/min

Air consumption

2,5 4,5 m3/min

RSP20

Maximum air pressure

8 bar

Number of vessels

1 vessel incl. on board compressor

Maximum charging hose length

50-60 m

Lifting in basket

400 kg

Minimum charging hose resistance

1 kOhm/m

Lifting height

9000 mm

Maximum charging hose resistance

30 kOhm/m

Rotation

+/- 45Jacks for stable set-up

Basket size (WxL)

VESSEL

Jacks at boom end

1439 x 1680 mm
Fixed

ANOL CC300

ANOL CC500

ANOL CC750

ANOL CC1000

Options

Volume

300 liters

500 liters

750 liters

1000 liters

FOPS roof on service boom basket

ANFO Capacity

240 kg

400 kg

600 kg

800 kg

Stainless service boom basket

Weights

200 kg

215 kg

230 kg

315 kg Ja

Diameter

900 mm

900 mm

900 mm

1000 mm

RSP25

Heights

1110 mm

1430 mm

1730 mm

1730 mm

Number of vessels

1 vessel incl. on board compressor

Lifting in basket

900 kg

Optional equipment
ANOL CC/DA Double material discharge for simultaneous charging of two blastholes
ANOL CC/Radio Radio remote controlled operationJacks for stable set-up
Bottom Anfo outlet
ANOL CC/Anol up Ejector feeding device for ANOL CC
Water adding system, to make blasting agents more sticky
Hose pusher, for charging up holes

Lifting height

6800 mm

Rotation

+/- 45Jacks for stable set-up

Basket floor (WxL)

2194 x 2405 mm

Jacks at boom end

Fixed

Options
FOPS roof on service boom basket
Stainless service boom basket

Charging hose meter & speed counter


Charging hose centralizer

Turning radius

Front wiew

40

R3700
R6700
2365

9851 3484 01 2015-06 rebro, Sweden. Legal Notice Copyright 2015, Atlas Copco Rock Drills AB, rebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or
copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are
subject to change without notice. Consult your Atlas Copco Customer Center for specific information.

COMMITTED TO SUSTAINABLE PRODUCTIVITY

We stand by our responsibilties towards our customers,


towards the environment and the people around us.
We make performance stand the test of time.
This is what we call Sustainable Productivity.

www.atlascopco.com

Você também pode gostar