Escolar Documentos
Profissional Documentos
Cultura Documentos
NOV Mono
Artificial Lift Systems
Coverage
The NOV Mono division is a true partner and worldwide source for complete Artificial Lift equipment and packaged
solutions. Our Artificial Lift professionals collaborate with you to properly evaluate well conditions and provide
customized artificial lift solutions that will optimize your production.
Professional Well Evaluation
Surface and Subsurface Equipment
Controllers and Production Automation
All Production Accessories and Expendables
LLOYDMINSTER, CANADA
HOUSTON, TEXAS
Common Applications
Heavy Crude (aggressive geometry)
Medium Crude
Coal Bed Methane (CBM) / Coal Seam Gas (CSG)
Shale Oil and Water
w w w. n o v. c o m / A r t i f i c i a l L i f t
N O V- M o n o - A L S @ n o v. c o m
ROTOR
PC Pump Series
m3/Day/100rpm
- m of lift
1-750
1-1200
1-1500
1-1950
2-1200
2-1500
3-600
3-1200
3-1800
4-750
4-1200
4-1500
4-1950
4-2400
4-3000
6-700
6-1050
6-1400
6-1750
6-2100
7-750
7-1200
7-1600
7-1800
7-2400
7-3000
8-1500
8-2250
9-600
9-1000
9-1400
9-1800
10-750
10-1200
10-1500
10-1800
10-2400
10-3000
10-3800
11-1800
15-700
15-1050
15-1400
15-1800
15-2100
15-2800
16-600 HTL
16-1200 HTL
16-1800 HTL
Bbl/Day/100rpm
- ft of lift
006-2500
006-4000
006-5000
006-6500
010-4000
010-5000
015-2000
015-4000
015-6000
025-2500
025-4000
025-5000
025-6500
025-8000
025-10000
044-2300
044-3500
044-4600
044-5750
044-6900
045-2500
045-4000
045-5400
045-6000
045-8000
045-10000
056-5000
056-7500
060-2000
060-3300
060-4600
060-6000
065-2500
065-4000
065-5000
065-6000
065-8000
065-10000
065-12500
067-6000
090-2300
090-3400
090-4600
090-6000
090-6900
090-9000
094-2000 HTL
094-4000 HTL
094-6000 HTL
STATOR
Pin
Connection
Max
O.D.
Length
Min. Tubing
Size
Top Connection
Max
O.D.
Length
in (a)
in (b)
in (c)
in
in (d)
in (e)
in (f)
in (g)
5/8 API
1.25
5/8 API
1.25
5/8 API
1.250
3/4 API
1.438
3/4 API
1.500
7/8 API
1.625
7/8 API
2.095
5/8 API
1.250
7/8 API
1.904
7/8 API
2.095
7/8 API
1.922
7/8 API
1.910
46
61.7
79.9
115.5
81.2
96.2
57.5
95.5
155.4
60.5
87.1
108.3
137.0
158.8
205.8
111.9
161.9
211.9
261.9
311.9
89.9
135.9
168.9
214.7
244.4
342.0
113.2
149.2
82.0
146.0
216.0
287.5
79.0
114.5
146.0
190.4
213.7
281.4
372.9
147.8
95.0
138.0
186.0
231.0
275.0
361.0
97.9
202.0
294.9
INSERTABLE
2 3/8
2.38
2 3/8
2.38
2 3/8
2.38
2/38
3.50
2 3/8
2.25
2 3/8
3.50
2 7/8
4.18
2 3/8
2.25
2 7/8
3.50
2 7/8
4.18
2 7/8
3.50
2 7/8
4.25
Tubing Sizes
2
44.6
60.3
80.3
113.4
80.4
82.2
56.7
80.4
153.4
62.6
88.7
110.7
138.7
160.7
212.7
126.0
175.0
224.0
273.0
322.0
87.7
136.7
169.7
210.3
244.7
331.7
79.0
111.5
120.2
184.2
254.2
324.2
73.7
109.2
141.2
175.7
207.2
275.2
341.2
120.2
86.0
129.0
172.0
215.0
259.0
345.0
101.5
194.5
278.5
Optional
056 060
Optional
10
11
15
17
21
23
24
27
32
33
39
44
47
54
64
70
75
80
96
98
110
111
120
130
150
165
065
067
090
095
131
144
150
170
200
205
245
275
295
340
400
440
500
505
600
615
685
690
755
820
950
1030
Standard
www.nov.com/ArtificialLift NOV-Mono-A
PUMP
ROTOR
PC Pump Series
m3/Day/100rpm
- m of lift
17-750
17-1200
17-1500
17-1800
17-2400
17-3000
17-3600
21-440
21-660
21-880
21-1100
21-1320
22-660 ML
22-1500 ML
22-2400 ML
22-3000 ML
23-750
23-1200
23-1500
23-1800
23-2400
23-3000
23-3800
24-600
24-900
24-1200
24-1500
24-1800
24-2100
27-800
27-1200
27-1600
27-1800
27-2400
27-3000
27-3800
32-600
32-900
32-1200
32-1500
32-1800
32-2100
33-750
33-1200
33-1500
33-1900
33-2400
39-750
39-1125
39-1500
39-1875
Bbl/Day/100rpm
- ft of lift
095-2500
095-4000
095-5000
095-6000
095-8000
095-10000
095-12000
131-1450
131-2150
131-2900
131-3600
131-4350
135-2200 ML
135-5000 ML
135-8000 ML
135-10000 ML
144-2500
144-4000
144-5000
144-6000
144-8000
144-10000
144-12500
150-2000
150-3000
150-4000
150-5000
150-6000
150-7000
170-2600
170-4000
170-5300
170-6000
170-8000
170-10000
170-12500
200-2000
200-3000
200-4000
200-5000
200-6000
200-7000
205-2500
205-4000
205-5000
205-6500
205-8000
245-2500
245-3750
245-5000
245-6250
STATOR
Pin
Connection
Max
O.D.
Length
Min. Tubing
Size
Top Connection
Max
O.D.
in (a)
in (b)
in (c)
in
in (d)
in (e)
in (f)
7/8 API
1.910
7/8 API
1.625
7/8 API
1.625
1 API
2.030
7/8 API
1.790
1 API
2.229
1 API
2.272
7/8 API
1.893
7/8 API
1.804
97.9
149.0
183.0
243.5
272.4
359.9
431.0
112.0
162.0
212.0
262.0
312.0
76.6
154.4
229.9
299.5
107.1
138.1
188.1
236.1
276.9
369.2
457.2
114.0
173.0
225.0
277.0
330.0
382.0
107.0
147.5
198.0
243.5
292.5
379.9
469.0
122.5
177.0
231.0
284.5
338.0
392.0
183.0
270.4
360.0
445.0
536.9
187.0
273.0
360.0
446.0
3.50
2 3/8
2.76
2 3/8
3.50
2 7/8
4.18
2 7/8
3.50
2 7/8
3.75
Length
in (g)
2 7/8
2 7/8
2 7/8
3.50
2 7/8
3.50
Tubing Sizes
2
100.2
147.2
181.2
240.2
267.2
353.7
427.2
126.0
175.0
224.0
273.0
322.0
77.6
147.7
217.6
287.7
95.7
134.2
184.2
228.2
261.2
361.2
449.7
105.0
158.0
211.0
263.0
316.0
369.0
145.8
194.5
236.3
281.1
326.9
425.7
509.2
131.5
185.0
239.0
292.5
346.5
400.0
181.2
260.6
352.7
436.7
529.2
173.0
259.0
345.0
431.0
4.51
INSERTABLE
Optional
Optional
111
120
130
150
165
200
206
334
m3/day
22
40
125
16
32
45
47
54
74
96
120
155
82
112
218
690
755
820
950
1030
1260
1300
2100
bpd
135
250
785
094
200
280
295
340
495
600
755
975
520
700
1370
alLift NOV-Mono-ALS@nov.com
Multi-Lobe
High-Temp Lock
Metal-to-Metal
w w w. n o v. c o m / A r t i f i c i a l L i f t
N O V- M o n o - A L S @ n o v. c o m
Bbl/Day/100rpm
- ft of lift
250-2500 ML
250-4000 ML
250-5000 ML
275-3300
275-5000
275-6700
275-8000
275-10000
280-1300 HTL
280-2650 HTL
280-4000 HTL
280-5400 HTL
295-2500
295-3750
295-5000
295-6250
295-7500
340-2000
340-3000
340-4000
340-5000
340-6000
400-2000
400-3000
400-4000
400-5000
400-6000
440-3000
440-4450
440-6000
495-660 HTL
495-2650 HTL
495-3300 HTL
495-4000 HTL
500-1700
500-2500
500-3300
500-4200
500-5000
505-2650
505-3200
505-4000
505-5300
505-6000
600-1750
600-2650
600-3500
600-4300
600-5250
615-2600
615-4000
615-5270
615-6000
685-1300
685-2650
685-3200
685-4000
690-2650
690-4000
690-5300
690-6000
755-1350
755-2000
755-2650
755-3300
755-4000
ROTOR
Pin
Connection
Max
O.D.
in (a)
in (b)
7/8 API
1.625
1 API
2.245
1 API
2.245
1 API
1 API
2.200
2.297
1 API
2.243
1 1/8 API
2.620
1 API
2.219
1 API
2.219
1 1/8 API
2.578
1 API
2.286
2 3/8 Pac
2.899
1 API
2.254
2 3/8 Pac
2.966
1 API
2.274
STATOR
Length
Min. Tubing
Size
Top Connection
Max
O.D.
in (c)
in
in (d)
in (e)
in (f)
155.6
225.6
299.8
200.0
294.0
391.8
480.4
575.1
105.8
200.0
292.8
391.8
166.0
241.0
317.0
393.0
469.0
177.0
257.0
338.0
418.0
499.0
190.1
277.0
370.9
454.1
546.1
190.0
283.0
371.0
100.0
373.5
462.8
552.8
194.5
283.0
373.5
462.8
552.8
190.0
234.0
283.0
371.0
411.0
190.0
283.0
372.0
455.0
544.0
192.1
283.0
374.0
464.9
200.0
392.1
481.3
578.0
192.1
283.0
374.0
464.9
190.0
283.0
372.0
455.0
544.0
2 7/8
3.50
2 7/8
3.75
2 7/8
4.50
2 7/8
2 7/8
4.51
4.51
2 7/8
4.50
3 1/2
4.54
3 1/2
4.50
2 7/8
3.75
3 1/2
4.54
2 7/8
4.51
4 1/2
5.52
2 7/8
3.75
5.52
2 7/8
4.51
INSERTABLE
Length
in (g)
147.7
217.2
287.7
243.2
334.7
431.2
520.7
619.2
101.2
194.0
286.7
379.5
175.5
251.0
327.0
402.5
478.5
185.0
266.0
346.5
427.0
508.0
177.0
263.3
354.0
440.4
531.0
205.0
293.5
382.0
99.0
370.5
461.0
551.5
232.7
320.2
410.2
497.2
587.7
205.0
249.0
293.5
382.0
426.0
201.0
289.5
378.0
466.5
555.0
175.0
262.5
350.0
394.0
243.2
431.2
521.2
619.2
175.0
262.5
350.0
394.0
201.0
289.5
378.0
466.5
555.0
Tubing Sizes
2
Optional
Optional
PUMP
PC Pump Series
m /Day/100rpm
- m of lift
125-700 ML
125-1200 ML
125-1500 ML
130-650
130-1300
130-1625
130-1950
150-360
150-720
150-900
150-1100
155-150 HTL
155-450 HTL
155-600 HTL
155-750 HTL
155-900 HTL
165-900
165-1350
165-1800
200-900
200-1350
200-1800
206-600
206-900
206-1200
206-1500
334-640
334-1280
334-1500
82-1200 MTM
112-1200 MTM
218-700 MTM
3
Bbl/Day/100rpm
- ft of lift
785-2400 ML
785-4000 ML
785-5000 ML
820-2150
820-4300
820-5380
820-6450
950-1200
950-2400
950-3000
950-3600
975-500 HTL
975-1500 HTL
975-2000 HTL
975-2500 HTL
975-3000 HTL
1030-3000
1030-4500
1030-6000
1260-3000
1260-4500
1260-6000
1300-2000
1300-3000
1300-4000
1300-5000
2100-2100
2100-4260
2100-5000
520-4000 MTM
700-4000 MTM
1370-2200 MTM
ROTOR
Pin
Connection
Max
O.D.
in (a)
in (b)
1 API
2.230
2 3/8 Pac
2.913
1 API
2.405
1 API
2.405
2 7/8 Pac
3.983
2 7/8 Pac
4.330
2 8 UN 2A
3.748
2 1/4 SA 2G 4.050
1 API
1 API
1 1/8 API
3.185
3.581
3.580
STATOR
Length
Min. Tubing
Size
Top Connection
Max
O.D.
in (c)
in
in (d)
in (e)
in (f)
196.8
292.3
386.1
200.0
375.0
463.0
550.0
200.0
388.1
488.0
586.9
104.1
294.6
388.1
488.0
586.9
223.5
323.5
424.0
223.5
323.5
424.0
199.8
291.6
383.6
474.9
213.3
412.0
500.0
238.9
238.9
239.8
INSERTABLE
2 7/8
3.75
5.52
3 1/2
4.50
3 1/2
4.50
5 1/2
7.38
5 1/2
7 LTC Pin
7.65
4 1/2
6.63
5 1/2
7.39
4 1/2
4 1/2
4 1/2
5 LTC pin
5 1/2 LTC Pin
5 1/2 LTC Pin
5.56
6.00
6.00
Length
in (g)
243.2
337.2
431.2
175.0
350.0
438.0
525.0
198.7
384.7
484.2
581.7
103.5
293.5
388.5
483.5
578.5
200.5
300.5
401.0
200.5
300.5
401.0
244.5
336.5
429.0
521.0
269.1
467.1
554.9
221.0
221.0
221.0
Tubing Sizes
2
Optional
Optional
Insert Model Available. Stator maximum OD becomes 2.75" Top Stator Connection becomes 2 3/8" NUE Box and Tag Bar Connection becomes 2 3/8" NUE Pin
Slim Hole Model Available. Stator Maximum OD becomes 3.82", Top Stator Connection becomes 2 7/8" EUE Box and Tag Bar connection becomes 2 7/8" EUE Pin. Length increases by 6"
or by 28" with a weld on Tag Bar.
High Temperature Lock and Slim Hole Options cannot be combined in the same stator.
Only available as High Temperature Lock stators.
HTL High Temperature Lock. These pumps are equipped with a mechanically locked metal cage inside the stator for high temperature resistance.
ML Multilobe. These pumps contain 2:3 rotor/stator geometry.
MTM Metal-To-Metal. These pumps have an all metal stator and contain no elastomer.
*
Available with optional 4 1/2 LTC Pin in place of 3 1/2 EUE Box
** Available with optional 5 1/2 LTC Pin in place of 4 1/2 EUE Box
^
a
b
c
f
e
d
w w w. n o v. c o m / A r t i f i c i a l L i f t
N O V- M o n o - A L S @ n o v. c o m
Elastomer Options
A range of stator elastomers is available allowing the pump to be selected for many downhole fluid conditions.
(OA) Medium Nitrile - This compound is a medium acrylonitrile rubber with good oil and solvent resistance. OA has
good physical properties having above average tensile and tear strength characteristics. It also has good resistance
to heat, ozone attack and very high resistance to gas permeation. Typically used in abrasive and high water cut
applications with low aromatic content. Maximum temperature - 200F (95C)
(OB) High Nitrile - This compound is a high acrylonitrile rubber. The higher acrylonitrile content improves the oil and
solvent resistance of the compound making it suitable for handling crude oils with medium to high aromatic content.
OB has high tensile and tear strength characteristics. It also has good resistance to heat, ozone attack and explosive
decompression. Maximum temperature - 212F (100C)
(OD) Soft Medium Nitrile - This compound is a medium acrylonitrile rubber with good oil and solvent resistance. OD
has excellent mechanical properties and offers the highest level of abrasion resistance. OD has a lower durometer
than OA and is typically used in highly abrasive applications with low aromatic content.
Maximum temperature - 195F (90C)
(OH) Hydrogenated Nitrile - This compound is a high acrylonitrile rubber. The properties of this compound are very
similar to those of the OB elastomer with improved resistance to hydrogen sulphide (H2S) and the ability to operate at
higher temperatures. The temperature resistance is further increased when combined with a High-Temperature-Lock
(HTL) stator. Maximum temperature - 275F (135C), Maximum temperature with HTL - 300F (150C)
Elastomer Properties
Hardness
5
Tensile Strength
OA Elastomer
H2S Resistance
Abrasion Resistance
OD Elastomer
OB Elastomer
OH Elastomer
Ozone Resistance
Tear Strength
Oil Resistance
Heat Resistance
094-2000, 4000,
6000 HTL
280-2605, 4000,
5400 HTL
295-2500, 5000,
7500 HTL
340-2000, 4000,
6000 HTL
495-2650, 3300,
4000 HTL
600-1750, 3500,
5250 HTL
755-1350, 2650,
4000 HTL
975-1500, 2000,
2500, 3000 HTL
82-1200 MTM
520-4000 MTM
112-1200 MTM
700-4000 MTM
218-700 MTM
1370-2200 MTM
w w w. n o v. c o m / A r t i f i c i a l L i f t
N O V- M o n o - A L S @ n o v. c o m
Insertable PC Pump
NOV Mono has an innovative, new insertable progressing cavity pump design that allows the customer to insert a PC
pump inside the production tubing and pressure test the tubing string with one easy to use tool.
2 7/8"
6, 9
3 1/2"
4 1/2"
4, 7, 8, 10, 11, 15, 17, 22, 23, 24, 27, 33, 39, 40, 44, 110, 125
5 1/2"
16 HTL, 32, 45 HTL, 47, 54, 64, 70, 74 HTL, 75, 80, 96, 120, 150, 155 HTL
Tubing
2 7/8"
004, 060
3 1/2"
006 INS, 010 INS, 015 INS, 025 INS, 045 INS, 131, 135 INS, 250 INS
4 1/2"
025, 045, 056, 065, 067, 090, 095, 135, 144, 150, 170, 205, 245, 250, 260, 275,
Stator
Rotor
Insert Tool
685, 785
5 1/2"
Torque Anchor
094 HTL, 200, 280 HTL, 295, 340, 400, 440, 495 HTL, 500, 505, 600, 755, 950,
955 HTL
Operating Position
Insert Position
Electric Driveheads
NOV Mono provides a complete line of Electric Driveheads for all your production
needs.
Technical Specifications
Model
M-30
M-60
M-100
M-150
M-300
Drive Type
Direct
Direct
Direct
Direct
Direct
Shaft Type
Hollow
Hollow
Hollow
Hollow
Hollow
Drive Style
Bearing Box
Bearing
Bearing Box
Bearing Box
Bearing Box
Input Style
Vertical
Vertical
Vertical
Vertical
Vertical
Drive Ratio
1:1
1:1
1:1
1:1
1:1
Backspin Control
Caliper Disc
Hydrodynamic
Hydrodynamic
Hydrodynamic
Hydrodynamic
1575 ft-lbs (2135 Nm) 2000 ft-lbs (2712 Nm) 2500 ft-lbs (3390 Nm) 3500 ft-lbs (4745 Nm)
Thrust Bearing
Thrust Bearing
Maximum Speed
500 rpm
600 rpm
600 rpm
600 rpm
600 rpm
Horsepower Rating
10 - 30
10 - 60
20 - 100
80 - 150
120 - 300
Frame Type
Single
Single Motor
Single Motor
Dual Motor
Dual Motor
1 (38 mm)
1 or 2
(38 mm or 51mm)
Ratings
1 (32 mm)
1 (32 mm)
1 or 1
(32mm or 38 mm)
180F / 80C
212F / 100C
212F / 100C
212F / 100C
212F / 100C
34 (864mm)
44 (1118mm)
50 (1270mm)
55 (1397mm)
64 (1626mm)
Width
30 (762mm)
35 (889mm)
35 (889mm)
41 (1041mm)
42 (1067mm)
2 (64 mm)
3 (83 mm)
3 (83 mm)
3 (83 mm)
4 (108mm)
Weight
Dimensions
Ca90 load rating is for 90 million revolutions. Reducing load one half increases life 10 times. Reducing rpm by one half doubles hours of life.
Maximum HP rating based on frame size only. Care must be taken in selecting motor and sheave combinations to ensure input rod torque is not exceeded.
w w w. n o v. c o m / A r t i f i c i a l L i f t
N O V- M o n o - A L S @ n o v. c o m
Technical Specifications
Model
M-75 PMM
M-105 PMM
Drive Type
Direct
Direct
Shaft Type
Hollow
Hollow
Drive Style
Bearing
Bearing
Input Style
Vertical
Vertical
Drive Ratio
1:1
1:1
Backspin Control
Speed Range
30 - 450 rpm
30 - 450 rpm
Thrust Bearing
Thrust Bearing
112F/50C
112F/50C
Diameter
Width
37 (940 mm)
37 (940 mm)
Ratings
Dimensions
Ca90 load rating is for 90 million revolutions. Reducing load one half increases life 10 times. Reducing rpm by one half doubles hours of life.
* Efficiency and RPM/Torque are typically derated at higher temperatures.
Hydraulic Driveheads
M-85H
Each model of the NOV Mono M-85H hydraulic drivehead is a beltless top drive
using gears to transfer torque to the polished rod. The precision ground gears
reduce noise levels by up to five times in comparison to conventional belt drives,
making the M-85H drivehead an ideal solution for use in populated areas. Each
M-85H drive utilizes a radial piston motor designed to reduce internal friction
and run efficiently. These driveheads are fitted with a hydraulically activated
stuffing box that can withstand any progressing cavity pumping application.
M-90H
NOV Monos M-90H hydraulic drivehead utilizes a bent axis motor that is coupled
to a hollow shaft bearing box by a belt and pulley system, which transfers torque
to the polished rod. Backspin is controlled through the hydraulic system. The
motors are available in a variety of displacements to accommodate a wide variety
of speeds and torques.
Technical Specifications
Model
M-85H
M-90H
Model
M-85H
M-90H
Drive Ratio
2:1 gear
Torque Control
Adjustable pressure
compensator on pump.
Adjustable pressure
compensator on pump.
176 F/80 C
175 F/ 80 C
Height Integral
Height Retrofit
N/A
Width
Weight Integral
Wellhead Connection
2d EUE Pin
38""-3000 psi-R31 Flange
4z-3000 psi-R37 Flange
58-2000 psi-R41 Flange
Thrust Bearing
Ca90-33,500 lbs /
ISO-129,000 lbs
Ca90-25,000 lbs /
ISO-96,300 lbs
Weight Retrofit
N/A
Backspin Control
Ca90 load rating is for 90 million revolutions at 500 rpm. Reducing load by 50% increases life 10 times. Reducing speed by 50% doubles hours of life.
w w w. n o v. c o m / A r t i f i c i a l L i f t
N O V- M o n o - A L S @ n o v. c o m
Hydrodynamic Brake
The Hydrodynamic Brake consists of a stationary half (stator) and
a rotary half (rotor). The stator is bolted into the housing and the
rotor is coupled to the shaft. During normal operation the rotor spins
freely. When the unit goes into backspin, the rotor begins to rotate
in the counter clockwise direction. The working fluid is then forced
to the outside of the rotor and creates a circular flow path inside the
brake cavity. As the energized fluid from the rotor comes into contact
with the stationary fins of the stator, the energy is transferred to the
stator and then back to the working fluid as heat. A small amount of
working fluid is continually removed from the system and replaced
with new fluid. The working fluid contained in the drivehead reservoir
is used as the braking medium, which allows the energy stored in the
fluid column and rod string to safely dissipate without the drivehead
reaching excessive backspin speeds.
Brake Stator
Brake Rotor
VFD Controller
NOV Mono offers a complete line of innovative products and supportive services
to monitor, communicate and control progressing cavity pump (PCP) artificial lift
systems accurately and cost-effectively.
Guardian II has been built by utilizing the vast pumping and control experience of field
operators and production engineers. NOV Monos suite of hardware and software
services allow quick assessment of well conditions and pump performance.
Our automation systems provide safe operating conditions with lower downtime
while optimizing well production. Pump optimization is implemented in the Guardian
II system to maximize the production available while still maximizing pump life.
Performance and production information are stored in a local (on-site) data repository
which can easily be displayed on a local color touch screen or in a simple browserbased user interface.
When automated action is taken, detailed information is captured and retained for
an extensive period of time. This can be used as an analysis aid to determine if the
action was correct or if any operational parameters need to be adjusted.
All control and monitoring is available through PC, Smart Phone (iPhone and Android),
and tablet technology.
NOV Mono provides a variety of downhole and surface sensor systems that easily integrate with the Guardian II system.
Customer provided SCADA systems can be integrated by using built-in input terminals that can interface with virtually any
system currently available.
w w w. n o v. c o m / A r t i f i c i a l L i f t
N O V- M o n o - A L S @ n o v. c o m
Downhole Solutions
Drilling Solutions
Corporate
Headquarters
7909 Parkwood Circle Drive
Houston, Texas 77036
United States
Phone: 713 375 3700
Fax: 713 346 7687
Sales
8708 West Little York Road
Suite 100
Houston, Texas 77040
United States
Phone: 281 854 0300
Fax: 281 854 0301
Industrial Solutions
Production Solutions
National Oilwell Varco has produced this brochure for general information only, and it is not
intended for design purposes. Although every effort has been made to maintain the accuracy and
reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any
loss, damage or injury resulting from the use of information and data herein. All applications for the
material described are at the users risk and are the users responsibility.
w w w. n o v. c o m
2014 National Oilwell Varco
All Rights Reserved
D392004432-MKT-001 Rev. 05