Escolar Documentos
Profissional Documentos
Cultura Documentos
2015/2016
Program Guide
Chemical Engineering provides the basic
scientific engineering knowledge for the design,
construction and operation of equipment and
plants that process materials by chemical and
physical operations into desired products. The
curriculum is aimed at provision of a broad
background in the underlying sciences of
Chemistry, Physics and Mathematics, and
detailed knowledge of Chemical Engineering
principles, that will enable the graduate to
proceed to further academic degrees by study
and research at this University or elsewhere, or
to carry on research, development or production
operations in any process industry.
Students can choose the general program or
specialize in an area by completing an option
program: Energy Conversion Engineering or
Biomedical Engineering Option.
The Department of Chemical Engineering
considers practical training and close contact
with Industry an important aspect of the
engineering curriculum. The Industrial Practice
Program includes both the two week Chemical
Engineering Practice School and the work term
or co-op components carried out in industry.
CHE 1004:
CHE 2004:
Balances)
Course Pre/co-requisites
Technical Electives Please see the list of technical electives for 2015/2016 in the
following pages. The department remains committed to offering its students a
breadth of technical elective courses, consistent with the facultys expertise and our
option programs. Please be aware that elective courses from other engineering
departments are considered creditable courses with the permission of the Director
of Undergraduate Studies.
Academic Advisors The academic advisors for the 2015 - 2016 academic year are:
1st year, 2nd year, and arriving transfer students: Dr. Guida Bendrich
3rd year: Dr. Mladen Eic
I wish you all well and best of luck in your studies in 2015 - 2016!
Guida Bendrich July 15, 2015
Technical Electives
Technical Electives are scheduled as follows for 2015-2016:
Fall 2015
CHE 5244
3 ch (3C)
Overview of the principles of petroleum engineering. Topics include fluid and rock properties, oilwell drilling,
reservoir types, review on wettability, capillary pressure, relative permeability, multiphase flow in porous media,
volumetric estimates and recoverable reserves, radial flow analysis of well performance, reservoir performance
analysis, secondary and tertiary oil recovery. Offshore development and production of hydrocarbon resources.
CHE 5515
3 ch (3C 1L)
This course covers the basic principles and practical aspects of several advanced surface analysis techniques
which include (i) x-ray photoelectron spectroscopy (XPS or ESCA), (ii) secondary ion mass spectrometry
(SIMS), (iii) confocal laser scanning microscopy (CLSM), (iv) atomic force microscopy (AFM), and (v) scanning
electron microscopy (SEM). Demonstrations will be given on most of these facilities. Students will propose a
research method for tackling their interested problems by using one or two surface analysis techniques they have
learned from this course. Prerequisite CHE 2501 and CHE 2506.
CHE 5834
Nuclear Engineering
3 ch (3C)
Radio-active decay, fission energy, nuclear interactions, neutron scattering and adsorption,. Neutron diffusion
elementary reactor theory, four and six factor formulae, neutron flux variation. Reactor kinetics, source
multiplication, decay heat, reactor start-up and shut down. Fuel burnup, fission product poisoning, refuelling.
Temperature and void effects on reactivity, reactor control. Fuel handling and waste disposal. This course is
intended for senior level students. Prerequisites: CHE 2012 or ME 3413; CHE 2703 or equivalent.
Winter 2016
CHE 5254
3 ch (3C)
Basic polymer concepts. Polymer structural characteristics and properties. Mechanisms, kinetics and reactors for
polymerization. Polymer rheology and transport processes. Processing applications and the effects of processing
on polymer properties. Prerequisites: CHE 2501, CHE 2703, Math 3503. Co-requisite: CHE 3304 or
equivalent.
CHE 5413
3 ch (3C)
Sources of air pollution; modeling atmospheric dispersions; pollution control in combustion; particulate control
methods; control of gaseous emissions; industrial odour control; indoor/in-plant air quality. Prerequisite: CHE
3314. Co-requisite: CHE 4341.
CHE 5522
Nanotechnology
3 ch (3C)
Studies the science of nanotechnology and surveys current and emerging applications of nanomaterials and
nanodevices in many engineering disciplines. The unique physical properties of materials at the nano-meter scale
are discussed and explained. Fabrication methods and advanced instrumentation for the construction,
manipulation and viewing of nanometer-sized materials are presented. Pre-requisite: CHEM1982/1987 or
equivalent, plus 100ch of degree credit. Restricted to science and engineering students.
CHE 5423
Practice School
4 ch (W)
A two week industrial practice school in selected industrial process plants scheduled after spring examinations.
Groups of students, with Faculty supervisors, are assigned to engineering projects to be carried out on industrial
process units. Students are required to present an oral report to plant operating and technical personnel at the end
of the practice session. A written report is also required. As there will be practical limitations to the number of
students in any one practice school, application for positions in this course will be treated on a first-come, firstserved basis. This course is strongly recommended as a technical elective for students not planning to complete
either the co-op or professional experience programs. Prerequisites: CHE 2004, CHE 2412.
Non-Technical Electives
Non-technical electives are an important element of engineering education. Regardless of engineering role, engineers require
an appreciation of business concepts, good communication skills and a broad sense of the impact of technology on society.
Most engineers end up in management roles, making decisions on time, people and money. It is wise therefore, for students
with an interest in management to choose their complimentary studies courses carefully. In the chemical engineering
program at UNB, three of the four non-technical elective courses required for the degree (12 ch total) are area specific:
Humanities (3 ch) Sociology, Anthropology, History, Philosophy, Classics, Political Science
Business (3 ch) Any TME or ADM course; or select ECON courses
Non-Language (3 ch) Any Humanities or Business course; PSYC, RLS, ENVS, ENR, IDS, RCLP, ARTS, WLCS
Other (3 ch) must be approved by the Director of Undergraduate Studies
The Department STRONGLY recommends that students to obtain business-related education through the complementary
studies stream and to pursue a diploma in Technology Management and Entrepreneurship which is offered by the Faculty
of Engineering. For more information on integrating this diploma with the undergraduate degree in chemical engineering,
please contact the Director of Undergraduate Studies.
Transfer Credits
As per university regulations, current students who are seeking transfer credit for courses taken at other institutions must
receive permission prior to taking the course. Courses that have been taken without the proper approvals will not be counted
towards your degree. Please obtain the appropriate permission slip (Request Form for Off-Campus Study) from the UNB
Registrar or online http://www.unb.ca/cel/_resources/pdf/bis/off-campus-study-form.pdf, and seek approval from the
Director of UG Studies for any courses you wish to take.
Course Equivalents
Please note that students must follow the course program only. Students are NOT permitted to take any other courses in
place of the required courses. Permission may be granted under exceptional circumstances, however, credit will not be given
without a letter of permission on file.
For a list of courses required for completion of the Options below please refer to the
Program Guide.
OPTIONS (You may register in more than one Option)
Signed: ________________________________
Please return this completed form to the Chemical Engineering Office.
Date: _______________________________
3ch
and three courses selected from the list below (most courses are offered every year):
BIOL 2023
BIOL 3043
BIOL 2023
BIOL 2753*
BIOL 2792
CHEM 3003**
CHEM 4523
KIN 2062*
KIN 3061*
KIN 4163*
ME 5913
PHYS 5993
Biochemistry
Cell Biology
Evolutionary Genetics
Introduction to Human Anatomy
Human Physiology - Systems
Biocomputing in Drug Design I
Medicinal Chemistry
Introductory Biomechanics
Advanced Biomechanics
Workplace Ergonomic Design And Analysis
Biomechanics
Magnetic Resonance Imaging
3ch
3ch
3ch
3ch
3ch
5ch
3ch
3ch
4ch
3ch
4ch
3ch
Energy Economics
Intro. to Environmental Studies
Climate Change
Environmental Impact Assessment and Management
Stakeholder Approaches to Environmental Problem Solving
Natural Resource Management, Institutions, Policy, Governance
Technology and Society
Students with special interest in environmental studies are also encouraged to pursue a minor or secondary major
in this area through the universitys Environmental Studies Program, administered by the Faculty of Forestry and
Environmental Management. The Department also encourages interested students to pursue a Masters of
Engineering degree in environmental studies after graduation.
International Exchange
Student Abroad
UNB recognizes that we live in an increasingly globalized world. This is why the university provides students
with overseas opportunities. The Student Abroad Program involves exchanges, internship programs or courses at
overseas institutions. Visit www.unb.ca/exchange for more information on where you can go, how to get there,
and other ways to get involved internationally!
Are you setting sails to new horizons? If yes, there are a few things that you should be aware of before departing.
To help you get ready for an experience of a lifetime, detailed information on entry requirements, passports &
visas information, study permit, travel warnings, immunization, fees, travel advice, etc, are necessary. The Global
Learning and Engagement Team has several resources available to you. Please contact them for more information.
Australia:
James Cook University, https://secure.jcu.edu.au/app/studyfinder/index.cfm
Swinburne University of Technology (Biomedical Engineering) http://www.future.swinburne.edu.au/courses
University of Melbourne (http://www.unimelb.edu.au/ )
China:
Xiamen University
Denmark:
Aarhus University http://kursuskatalog.au.dk/en/
France:
cole Suprieure de Chimie Physique lectronique de Lyon (http://www.cpe.fr/fr2/default.asp )
Summer School at CPE Lyon http://www.cpe-international-students.com/-Summer-school-.html
MICEFA, http://micefa.org
Universit de Bretagne-Sud
Universit de Poitiers
Germany:
Hong Kong:
Hong Kong Polytechnic University, Biomedical Engineering
Korea:
Korea University
Norway:
Bergen University College (http://www.hib.no/english/index.html )
Singapore:
Nanyang Technological University
Spain:
Universidad de Santiago di Compostela
Thailand:
Chulalongkorn University
United Kingdom:
Swansea University, Wales
For more information on these programs, drop by the Department Office and get the full detailed handout.
Sept.
year 1
term 1
term 1
term 1
term 2
term 2
term 2
term 3
term 3
term 3
term 4
term 4
term 4
Jan.
May
Sept.
year 2
Jan.
May
co-op
Sept.
term 5
year 3
term 5
Jan.
term 6
term 6
term 6
May
co-op
Sept.
term 7
year 4
term 5
co-op
Jan.
term 8
May
Sept.
year 5
graduation
4 years
co-op
term 7
term 7
term 8
term 8
graduation
5 years
graduation
5 years
Jan.
May
Note: The minimum cumulative GPA for participation in the Co-Op Program is 2.7
Diploma in Technology Management and Entrepreneurship (DTME) for Chemical Engineering Students
The Department STRONGLY recommends students obtain business-related education through the
complimentary studies stream and pursue a Diploma in Technology Management and Entrepreneurship
(DTME) which is offered by the J. Herbert Smith Centre in the Faculty of Engineering. By planning ahead,
and with careful selection of courses, you can complete this diploma concurrently with your degree
while only taking one additional course. And there is no additional cost for this program!
The diploma requires completion of five courses, up to four of which can be shared with your degree. To
most easily meet the requirements of your degree and the DTME concurrently:
1) Select one of the following as your humanities course:
HIST 3925: Technology and Society
POLS 1603: Politics of Globalization
SOCI 2534: Technology and Social Change
The Department has a zero tolerance policy on plagiarism. Teaching Assistants and instructors will
aggressively identify and severely penalize offenders, even for minor infractions.
The minimum penalty for plagiarism is a grade of zero on the work and a notation on your transcript.
Deferred Exams
You are expected to follow the exam schedule set by the Registrar.
Students who by reason of illness or extenuating circumstances are unable to write final examinations at the
specified times may apply to the Registrar for permission to write deferred exams written medical permission is
required.
The Department of Chemical Engineering has set deferred examination dates of Thursday, January 7, 2016 and
Thursday, May 5, 2016. Students who cannot write on these dates will normally be required to appeal for
further deferral via the Registrars Office.
For full Deferred Examination regulations please refer to University Regulations in the Undergraduate
Calendar.
UNB Course
ChE 1001
ChE 2003
ChE 2004
ChE 2012
ChE 2412
ChE 2418
ChE 2501
ChE 2506
ChE 2525
ch
1
3
3
3
3
3
3
1
4
ChE 2703
ChE 3123
ChE 3304
ChE 3314
ChE 3324
ChE 3424
ChE 3434
ChE 3505
ChE 3601
ChE 4101
ChE 4225
ChE 4341
ChE 4404
CHE TE
CHE TE
CHE TE
CHE TE
3
3
4
3
4
3
3
4
4
3
8
4
3
Chem 1982/1987
Chem 2401
Chem 3621
Chem 3886
Chem 3897
Chem 4886
5
3
3
2
1
2
Course equivalents
Grade(s)
Notes
UNB course
Phys 1081
Engg 1082
ch
5
4
CS 1003
EE 1813
Engg 1001
Engg 1003
Engg 1015
4
4
0
4
2
Engg 4013
Biol 1001
Math 1003
Math 1013
Math 1503
Math 2513
Math 3503
3
3
3
3
4
3
Stat 2593
NTE Humanities
NTE Business
NTE Non-Lang
3
3
3
NTE Other
Course Equivalents
Grade(s)
Notes
Engg 1013
Notes:
The above are the courses required for the ChE Program. Course substitutions from the program are NOT
permitted without prior approval from the department. If approval to take another course has been given a
copy of the permission must be given to Sylvia for your file.
Term 1
Term 2
Term 3
Term 4
Term 5
CS 1003
CHEM 1982
CHE 2012
MATH 3503
CHE 3324
MATH 1503
CHE 1001
(W)
CHEM 2401
PHYS 1081
ECE 1813
CHE 2003
CHE 2703
MATH 1003
MATH 1013
MATH 2513
CHE 2525
BIOL 1001
CHE 2004
8:30 AM
9:00 AM
9:30 AM
10:00 AM
10:30 AM
11:00 AM
11:30 AM
12:00 PM
12:30 PM
1:00 PM
ENGG 1003
(M,W)
2:00 PM ENGG1001 (F)
1:30 PM
CHE 3123
ENGG 1082
Term 6
Term 7
Term 8
Advising Information
Fall Term
CHE 3314
CHE 3601
CHE 4101
CHE 3304
CHE 3505
CHE 4341
NTE or TE
NTE or TE
CHE 2418
NTE or TE
NTE or TE
CHEM 3621
NTE or TE
2:30 PM
3:00 PM
3:30 PM
4:00 PM
ENGG 1003
(M)
4:30 PM
ENGG 1082
(M)
CHEM 1987
(W)
CHE 2412
(W or F)
CHEM 3886
(M)
{alternative
second section
in evening}
5:00 PM
5:30 PM
6:00 PM
6:30 PM
+NTE
7:00 PM
Tuesdays
8:30 AM
9:00 AM
CS 1003
ECE 1813
CHE 2501
Winter Term
MATH 3503
9:30 AM
CHE 4101
10:00 AM
10:30 AM
STAT 2593
CHE3505
11:00 AM
11:30 AM
12:00 PM
ENGG 1015
12:30 PM
MATH 2513
CHE 2703
CHE 3324
NTE or TE
CHE 3424
{alternative M
or W or Th}
CHE 3434
{alternative M
or W or Th}
CHE 4341
NTE
1:00 PM
1:30 PM
CHE 2412
2:00 PM
2:30 PM
3:00 PM
3:30 PM
4:00 PM
PHYS 1081
ECE 1813
CHEM 4886
{alternative F}
4:30 PM
5:00 PM
5:30 PM
6:00 PM
6:30 PM
ENGG 4013
7:00 PM
Thursdays
8:30 AM
9:00 AM
MATH 1003
MATH 1013
CHE 3424
CHE 2501
9:30 AM
Summer Term
CHE 3434
CHE 3304
10:00 AM
10:30 AM
STAT 2593
11:00 AM
11:30 AM
CHE 2004
12:00 PM
12:30 PM
NTE
1:00 PM
CHE 3601
NTE or TE
CHE 2012
CHE 4404
1:30 PM
CHE 4404
CHE 2525
2:00 PM
2:30 PM
3:00 PM
3:30 PM
ENGG 1015
CHE 2506
4:00 PM
CHEM 3897
4:30 PM
5:00 PM
5:30 PM
6:00 PM
6:30 PM
ENGG 4013
7:00 PM
lecture
tutorial
lab
elective
Office Phone
447-3238
452-6266
452-6063
452-6318
453-4690
453-4689
451-6861
453-4628
Brian Lowry
453-4691
Jamie Miles
458-7308
Yonghao Ni (Chair) 452-6066
Laura Romero-Zeron 453-5044
Kripa Singh
453-5108
Huining Xiao
453-3532
Ying Zheng
447-3329
Room No.
Email
E39A
bendrich@unb.ca
Room 204 (Bld. 2)
chibante@unb.ca
E230F
fcollins@unb.ca
E230C
wcook@unb.ca
GD126
cout@unb.ca
D32B
meic@unb.ca
I-217 Enterprise UNB kecheng@unb.ca
E230B
kecheng@unb.ca
C119
bjl@unb.ca
D106
jamie.miles@unb.ca
D39
yonghao@unb.ca
D32A
laurarz@unb.ca
H214
singhk@unb.ca
E46B
hxiao@unb.ca
E39B
yzheng@unb.ca
Faculty Advisors
Guida Bendrich
Mladen Eic
3rd Year
Willy cook