Escolar Documentos
Profissional Documentos
Cultura Documentos
Phone: 503.236.4500
Email: Chris@PortlandKettleW orks.com or Joe@PortlandKettleW orks.com
W eb: www.PortlandKettleW orks.com
Quote
Valid Till: 07/14/2014
Quote Number : PKW-13-2335
BILL TO:
SHIP TO:
Account Name:
Contact Name:
Quote Stage:
Product Details
3.5bbl Hopmaster DF
3.5 BBL (4.0 Hl) Brew House
The Portland Kettle Works Hopmaster series is a line of professional grade Nano brewery system
superior to any other Nano on the market. Our uncompromising attitude of quality and intuitive
design is apparent form the initial installation. The system is engineered with the goal of a hassle
free brewing experience. To begin you will not find any mild steel in our brewhouse, the kettles
and brew deck are fabricated form 100% certified 304L food grade stainless steel. All
mechanical components provide infinite control to the brewer and allow precise repetition in an
efficient and time saving brewing process. In contrast to some competitive Nano brew houses
where valves and electronics are of inferior quality or are simply home brew systems scaled to
larger batch sizes, with no apparent devotion to the process of craft brewing, the components of
your PKW brewhouse are 100% professional grade, exactly like those found on much larger
systems costing several times the price. We have approached every aspect of the design from
the professional brewers perspective taking the majority of engineering considerations from our
larger systems. Our goal is a pleasurable and safe brew day, everyday.
General Specification: Brewhouse yields approximately 3.5 bbls (4.0 Hl) of beer after boil.
Standard 3 vessel brew house features include:
A center mounted non-skid brewers platform designed to provide ample access to both
the kettle and mash for seamless brewing operation and ease of monitoring
Hot liquor tank with integrated HERMS coil Assembly allows for micro adjustment
temperature control of mash process
Mash Tun: 167 Gallon (632 L) Capacity, High-Performance Trapezoidal V- Wire False
Bottom, Side mounted manway designed for efficient labor saving grain out operations,
integrated site gauge, Sparge Assembly and Vorlauf Port. Concial bottom vessel with ultimate
drain allows for collection of all wort except that absorbed within the grain bed.
Boil Kettle: 153 Gallon (580 L) Capacity. Equipped with an integrated site gauge,
whirlpool port and removable Trub Retainer assembly, which produces a neat tight trub cone
formation and allows for high yield with minimal wort loss. Once this cone is formed the conical
bottom with 2 ultimate drain allows for ease of trub removal. Simply spray all materials down the
port for collection at the front of the skid.
Automated Digital Temperature controls monitor and adjust the HLT and Mash Tun
Total
$0.00
Product Details
Qty List Price
temperature precisely to the brewers specification allowing for efficient single infusion or step
mash processing with a high degree of control and repeatability.
Motor drive to the brewhouse pump is equipped with a Variable Frequency Drive (VFD)
which allows the brewer to adjust the pump output from zero to 17 GPM (65 LPM) output, putting
total control of the brewhouse functions at the brewers fingertips
Heat Exchangers 3A FDA compliant tie bolt sectional heat exchanger is designed for
long lasting performance and 30-minute knock out of 212-degree (100 C) wort to 70 degrees (21
C) with 60 degree (15 C) cooling water. We also offer a line of two-stage heat exchangers where
cooling water temperatures exceed 70 degrees F (21 C).
Brewers Control Panel conveniently mounted within reach of the brew house manifold
so that the brew crew and take advantage of the best ergonomic positioning while brewing
A small brewhouse manifold and sanitary piping is standard in the design and reduces
the use of cumbersome brewers hose during the brewing process
3-Prong standard power cord allows brew house to be plugged directly into standard
120V power source.
All systems are Pre-wired, pre-piped and pre-tested for easy shipping, rigging installation
and startup
With safety in mind, the three integrated gas burners (specify NG or Propane) are fired
by a direct spark ignition system tied to electronic solenoid valves, which shut down gas flow
automatically if no flame is detected at the burner. There are no open flame pilot lights in the
system.
*Note that this system is designed to be used in conjunction with customer supplied a
180 degree hot water source supplied at a rate of 5-7gpm. Hot Liquor Tanks are available from
PKW.
Total
*Most areas will require a large Type II ventilation hood installed over this system (estimated cost
$8,000-$10,000).
A center mounted non-skid brewers platform designed to provide ample access to both
the kettle and mash for seamless brewing operation and ease of monitoring
Mash Tun: 167 Gallon (632 L) Capacity. Bottom of kettle steam jacketing allows for
precise control of mash temperatures. High-Performance Trapezoidal V- Wire False Bottom,
Side mounted manway designed for efficient labor saving grain out operations, integrated site
gauge, Sparge Assembly and Vorlauf Port. Concial bottom vessel with ultimate drain allows for
collection of all wort except that absorbed within the grain bed.
Boil Kettle: 153 Gallon (580 L) Capacity. Steam Powered and Equipped with an
integrated site gauge, whirlpool port and removable Trub Retainer assembly, which produces a
neat tight trub cone formation and allows for high yield with minimal wort loss. Once this cone is
formed the conical bottom with 2 ultimate drain allows for ease of trub removal. Simply spray all
materials down the port for collection at the front of the skid.
Automated Digital Temperature controls monitor and adjust the HLT and Mash Tun
temperature precisely to the brewers specification allowing for efficient single infusion or step
mash processing with a high degree of control and repeatability.
Motor drive to the brewhouse pump is equipped with a Variable Frequency Drive (VFD)
which allows the brewer to adjust the pump output from zero to 17 GPM (65 LPM) output, putting
$34,490.00 $34,490.00
Product Details
Qty List Price
total control of the brewhouse functions at the brewers fingertips
Heat Exchangers 3A FDA compliant tie bolt sectional heat exchanger is designed for
long lasting performance and 30-minute knock out of 212-degree (100 C) wort to 70 degrees (21
C) with 60 degree (15 C) cooling water. We also offer a line of two-stage heat exchangers where
cooling water temperatures exceed 70 degrees F (21 C).
Brewers Control Panel conveniently mounted within reach of the brew house manifold
so that the brew crew and take advantage of the best ergonomic positioning while brewing
A small brewhouse manifold and sanitary piping is standard in the design and reduces
the use of cumbersome brewers hose during the brewing process
3-Prong standard power cord allows the brew house to be plugged directly into
standard 120V power source.
All systems are Pre-wired, pre-piped and pre-tested for easy shipping, rigging installation
and startup
Steam power to the brew house is via a PKW boiler system, specifically designed to
provide constant reliable steam for the brewing operations. Installation of the steam boiler and
condensate plumbing are not included in the system price. Please consult local code to assure
that the boiler meets permit requirements.
*Note that this system is designed to be used in conjunction with customer supplied a
180 degree hot water source supplied at a rate of 5-7gpm. Hot Liquor Tanks are available from
PKW.
Total
*No open flame. Most areas will not require a Type II Ventilation Hood to operate this system.
$1,910.00
$1,910.00
$99.00
$99.00
$249.00
$249.00
$437.00
$437.00
$995.00
$995.00
$595.00
$595.00
Mash Paddle
Paddle with handle for mixing, stirring or scraping.
Standard Lid
Stainless is Food Grade & Certified 16 Ga. All 304 SS Construction Lid, Handle, Rolled 1 x
Outer Ring Strap
CIP Lid
S/S Construction Lid, handle, spray ball, TC Gasket, TC Clamp, TC connection. Can be used as
a standard lid or for CIP purposes.
*Not 100% sealable.
BS - Aeration Assembly
Wort Aeration Assembly Thermometer, Thermowell, Site Glass, Aeration Stone, 2 Ts and
Clamps for wort aeration from the Plate Chiller to the FV.
Product Details
Total
$0.00
Jacketed and Insulated 3.5 Bbl Uni Tank, 132 gallon capacity constructed as follows:
Tank Wall and Head - Food Grade & Certified 12 Gauge 304 SS Rated to 14.7 PSI Operating
Pressure,
Cone 60 deg. Food Grade & Certified 12 Ga. 304 SS Conical Bottom
Jacketing - 14 Ga. Dimple Jacket
Shell - Fully welded 16 Ga. Outer shell, with 1.5 Insulation Jacket
General Specification: Dish top and Bottom, All welds blended and finished for sanitary
applications, Racking Arm, Pressure Relief Valve, Blow Off/CIP Tube, Spray Ball, Top Mount
Man-way, Carbonation Port, Sample Valve.
$10,995.00 $32,985.00
Jacketed and Insulated 7 Bbl Fermentation Tank, 270 gallon capacity constructed as follows:
Tank Wall and Head - 304 SS Rated to 14.7 PSI Operating Pressure,
Cone 304 SS 60 degree conical configuration,
Jacketing - Dimple Jacket
Shell - Fully welded Outer shell, with Insulation Jacket
General Specification: All welds blended and finished for sanitary applications, Racking Arm,
Pressure Relief Valve Port, Blow Off/CIP Tube, Spray Ball, Top Mount Man-way, Sample Valve
Port Carbonation Port
$9,850.00
$0.00
$5,275.00
$0.00
$6,990.00
$6,990.00
$0.00
$0.00
Jacketed and Insulated 7 Bbl Brite Tank, 220 gallon capacity constructed as follows:
Tank Wall and Heads - Food Grade & Certified 304 SS, Rated to 14.7 PSI operating pressure
Jacketing - Dimple Jacket
Shell - Fully welded Outer shell, with Insulation Jacket
General Specifications: Dish top and Bottom, All welds blended and finished for sanitary
applications, Sight Tube, Pressure/Vacuum Relief Valve Port, CIP Blowoff tube, Top Mount
Manway, Carbonation Port, Sample Valve Port.
Product Details
1 - 2" Clamp
1 - 2" Gasket
Total
Carb-Stone
$295.00
$295.00
$495.00
$1,980.00
$9,875.00
$9,875.00
$6,250.00
$0.00
$845.00
$845.00
$5,500.00
$5,500.00
$3,636.00
$0.00
$3,170.00
$3,170.00
$1,000.00
$0.00
Carbonation Stone Carbonation stone, ball valve and integrated check valve
Glycol Controls
Glycol Controls NEMA4 Box
Per Tank
1 each Autonics Digital controls
1 eachRTD Thermowells
1 each 3/4" solenoid valves 24V
1 each control assembly box labeled by tank
120v Input, 24v Output
Product Details
- Extended (S) style carbon steel heads.
- 2x 1-1/2 inch S Line nozzles on the fixed head and 2x 1-1/2 inch S Line nozzles on the
movable head.
- 62 NBR-style gaskets.
- Mounting style: Tab-style feet.
-5 GPM 205 to 70 degree wort with 60 degree cooling water
Total
$2,880.00
$0.00
$2,246.00
$0.00
$1,795.00
$0.00
$585.00
$585.00
$3,250.00
$3,250.00
$0.00
$0.00
*Optional*
*Requires 3Bbl Kettle Enclosure*
6" Steam Condenser Stack to drain condensate to floor. Cold water mister. Solenoid Valve.
Controls at Brew House.
**Note: Must purchase 3Bbl Kettle Enclosure for this product to attach to.
Mixing Manifold
Stainless steel mixing valve assembly, infinite control of strike water temperature with separate
control valve at mash hydrator for flow control, 48 of high temp flexible hose for connection
from mixing valve assembly to mash hydrator.
Grand Total: