Escolar Documentos
Profissional Documentos
Cultura Documentos
Trademarks
Autodesk, the Autodesk logo, and ReCap are registered trademarks or trademarks
of Autodesk, Inc., and/or its subsidiaries and/or affiliates.
Intel, Xeon and Pentium are registered trademarks or trademarks of Intel
Corporation or its subsidiaries in the United States and other countries.
ACE, TAO, CIAO, and CoSMIC are copyrighted by Douglas C. Schmidt and his research
group at Washington University, University of California, Irvine, and Vanderbilt University, Copyright
(c) 1993-2009, all rights reserved.
All other brand names, product names or trademarks belong to their respective
holders.
Patents
Portions related to Threading Building Blocks v.4.1.2 are Copyright (C) 2005-2013
Intel Corporation. All Rights Reserved.
This software is based in part on the works of the following:
Portions related to CS-Map v. 14.00 are Copyright (c) 2008, Autodesk, Inc. All
rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
-1-
-2-
-3-
-4-
3. Altered versions--including, but not limited to, ports to new operating systems, existing
ports with new graphical interfaces, and dynamic, shared, or static library versions--must
be plainly marked as such and must not be misrepresented as being the original source.
Such altered versions also must not be misrepresented as being Info-ZIP releases-including, but not limited to, labeling of the altered versions with the names "Info-ZIP" (or
any variation thereof, including, but not limited to, different capitalizations), "Pocket
UnZip," "WiZ" or "MacZip" without the explicit permission of Info-ZIP. Such altered
versions are further prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP email addresses or of the Info-ZIP URL(s).
4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "WiZ," "Pocket
UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases.
Portions relating to Windows Template Library-WTL v.8.0 are Copyright (C) Microsoft
Corporation. All rights reserved.
This file is a part of the Windows Template Library. The use and distribution terms for this
software are covered by the Common Public License 1.0
(http://opensource.org/licenses/cpl1.0.php) which can be found in the file CPL.TXT at the
root of this distribution. By using this software in any fashion, you are agreeing to be
bound by the terms of this license. You must not remove this notice, or any other, from
this software.
The source code for WTL v.8.0 (and modifications made by Autodesk, if any) is available
from www.autodesk.com/lgplsource.
Portions related to KQOAuth v.0.97 are authored by Johan Paul (johan.paul@gmail.com)
http://www.johanpaul.com. This Autodesk software contains KQOAuth v.0.97, as modified
by Autodesk. KQOAuth v.0.97 is licensed under the GNU Lesser General Public License
v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text
copy of this license is included on the media provided by Autodesk or with the download of
this Autodesk software. You may obtain a copy of the source code for KQOAuth v.0.97, as
modified by Autodesk, from www.autodesk.com/lgplsource or by sending a written request
to:
Autodesk, Inc.
Attention: General Counsel
Legal Department
111 McInnis Parkway
San Rafael, CA 94903
Your written request must:
1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to
hold a DVD) with postage sufficient to cover the amount of the current
U.S. Post Office First Class postage rate for CD/DVD mailers (or the
envelope you have chosen) weighing 5 ounces from San Rafael,
California USA to your indicated address; and
2. Identify:
a. This Autodesk software name and release number;
-5-
b. That you are requesting the source code for KQOAuth v.0.97, as
modified by Autodesk; and
c. The above URL (www.autodesk.com/lgplsource)
so that Autodesk may properly respond to your request. The offer to receive this KQOAuth
v.0.97 source code via the above URL (www.autodesk.com/lgplsource) or by written
request to Autodesk is valid for a period of three (3) years from the date you purchased
your license to this Autodesk software.
You may modify, debug and relink KQOAuth v.0.97 to this Autodesk software as provided
under the terms of the GNU Lesser General Public License v.2.1.
Portions relating to OpenSSL toolkit are under OpenSSL License and Original SSLeay
License.
OpenSSL License
Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the
following acknowledgment: "This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or
promote products derived from this software without prior written permission. For
written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL"
appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-6-
-7-
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this
code cannot be changed. i.e. this code cannot simply be copied and put under another
distribution licence [including the GNU Public Licence.]
Portions relating to QAxContainer are Copyright (c) 2009 Nokia Corporation and/or its
subsidiary (-ies). All rights reserved. Contact: Qt Software Information (qtinfo@nokia.com). This software contains QAxContainer.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
* Neither the name of Nokia Corporation and its Subsidiary (-ies) nor the names of its
contributors may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
Portions relating to Qt v.4.7.2 are Copyright (c) 2011 Nokia Corporation and/or its
subsidiary (-ies). All rights reserved. Contact: Qt Software Information (qtinfo@nokia.com). This Autodesk software contains Qt v.4.7.2. Qt is licensed under the
GNU Lesser General Public License v.2.1, which can be found at
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is
included on the media provided by Autodesk or with the download of this Autodesk
software. You may obtain a copy of the source code for Qt v4.7.2 from
www.autodesk.com/lgplsource or by sending a written request to:
Autodesk, Inc.
Attention: General Counsel
Legal Department
111 McInnis Parkway
San Rafael, CA 94903
Your written request must:
-8-
1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD)
with postage sufficient to cover the amount of the current U.S. Post Office First Class
postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces
from San Rafael, California USA to your indicated address; and
2. Identify:
a. This Autodesk software name and release number;
b. That you are requesting the source code for Qt v4.7.2; and
c. The above URL (www.autodesk.com/lgplsource)
so that Autodesk may properly respond to your request. The offer to receive this Qt
source code via the above URL (www.autodesk.com/lgplsource) or by written request to
Autodesk is valid for a period of three (3) years from the date you purchased your license
to this Autodesk software.
You may modify, debug and relink Qt to this Autodesk software as provided under the
terms of the GNU Lesser General Public License v.2.1.
-9-
- 10 -
so that Autodesk may properly respond to your request. The offer to receive this Qt
source code via the above URL (www.autodesk.com/lgplsource) or by written request to
Autodesk is valid for a period of three (3) years from the date you purchased your license
to this Autodesk software.
You may modify, debug and relink Qt to this Autodesk software as provided under the
terms of the GNU Lesser General Public License v.2.1.
Portions related to Qt MFC Migration Framework are Copyright (c) 2009 Nokia Corporation
and/or its subsidiary(-ies). This Autodesk software contains Qt MFC Migration Framework
v.2.8, as modified by Autodesk, Inc.. Qt MFC Migration Framework is licensed under the
GNU Lesser General Public License v.2.1, which can be found at
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is
included on the media provided by Autodesk or with the download of this Autodesk
software. You may obtain a copy of the source code for Qt MFC Migration Framework v.2.8,
as modified by Autodesk, Inc., from www.autodesk.com/lgplsource or by sending a written
request to:
Autodesk, Inc.
Attention: General Counsel
Legal Department
111 McInnis Parkway
San Rafael, CA 94903
Your written request must:
1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD)
with postage sufficient to cover the amount of the current U.S. Post Office First Class
postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces
from San Rafael, California USA to your indicated address; and
2. Identify:
a. This Autodesk software name and release number;
b. That you are requesting the source code for Qt MFC Migration Framework v.2.8, as
modified by Autodesk, Inc.; and
c. The above URL (www.autodesk.com/lgplsource)
so that Autodesk may properly respond to your request. The offer to receive this Qt MFC
Migration Framework source code, as modified by Autodesk, Inc., via the above URL
(www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of
three (3) years from the date you purchased your license to this Autodesk software.
You may modify, debug and relink Qt MFC Migration Framework to this Autodesk software
as provided under the terms of the GNU Lesser General Public License v.2.1.
Portions related to Log4CPLUS v 1.0.4 are Copyright (C) 1999-2013 Contributors to
log4cplus project. All rights reserved. Licensed under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance with the License. You may
obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless
required by applicable law or agreed to in writing, software distributed under the License is
distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
either express or implied. See the License for the specific language governing permissions
and limitations under the License.
- 11 -
- 12 -
Portions related to Libcurl are Copyright (c) 1996 - 2013, Daniel Stenberg,
<daniel@haxx.se>. All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or
without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software without
prior written authorization of the copyright holder.
This Autodesk software contains QJson v.0.8.1, as modified by Autodesk, Inc. QJson is
licensed under the GNU Lesser General Public License v.2.1, which can be found at
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is
included on the media provided by Autodesk or with the download of this Autodesk
software. You may obtain a copy of the source code for QJson v.0.8.1 as modified by
Autodesk, Inc. from www.autodesk.com/lgplsource or by sending a written request to:
Autodesk, Inc.
Attention: General Counsel
Legal Department
111 McInnis Parkway
San Rafael, CA 94903
Your written request must:
1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD)
with postage sufficient to cover the amount of the current U.S. Post Office First Class
postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces
from San Rafael, California USA to your indicated address; and
2. Identify:
a. This Autodesk software name and release number;
b. That you are requesting the source code for QJson v.0.8.1, as modified by Autodesk; and
c. The above URL (www.autodesk.com/lgplsource)
so that Autodesk may properly respond to your request. The offer to receive this QJson
v.0.8.1 source code via the above URL (www.autodesk.com/lgplsource) or by written
request to Autodesk is valid for a period of three (3) years from the date you purchased
your license to this Autodesk software. You may modify, debug and relink QJson v.0.8.1 to
this Autodesk software as provided under the terms of the GNU Lesser General Public
License v.2.1.
- 13 -
Portions relating to png++ v.0.2 are written by Alexander Shulgin (alex dot shulgin at
gmail dot com)
Copyright (C) 2007, 2008
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
Portions related to Minpack are Copyright Notice (1999) University of Chicago. All rights
reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. The end-user documentation included with the redistribution, if any, must include the
following
acknowledgment:
"This product includes software developed by the University of Chicago, as Operator of
Argonne National Laboratory.
Alternately, this acknowledgment may appear in the software itself, if and wherever such
third-party acknowledgments normally appear.
4. WARRANTY DISCLAIMER. THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT WARRANTY OF
ANY KIND. THE COPYRIGHT HOLDER, THE UNITED STATES, THE UNITED STATES
- 14 -
- 15 -
Except as contained in this notice, the name of the XFree86 Project shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software without
prior written authorization from the XFree86 Project.
Portions related to Qt v.4.8.4 are Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies). All
rights reserved. This Autodesk software contains Qt v. 4.8.4, as modified by Autodesk. Qt
is licensed under the GNU Lesser General Public License v.2.1, which can be found at
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is
included on the media provided by Autodesk or with the download of this Autodesk
software. You may obtain a copy of the source code for Qt v. 4.8.4, as modified by
Autodesk, from www.autodesk.com/lgplsource or by sending a written request to:
Autodesk, Inc.
Attention: General Counsel
Legal Department
111 McInnis Parkway
San Rafael, CA 94903
Your written request must:
1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to
hold a DVD) with postage sufficient to cover the amount of the current
U.S. Post Office First Class postage rate for CD/DVD mailers (or the
envelope you have chosen) weighing 5 ounces from San Rafael, California
USA to your indicated address; and
2. Identify:
a. This Autodesk software name and release number;
b. That you are requesting the source code for Qt v. 4.8.4, as
modified by Autodesk; and
c. The above URL (www.autodesk.com/lgplsource)
so that Autodesk may properly respond to your request. The offer to receive this Qt
source code via the above URL (www.autodesk.com/lgplsource) or by written request to
Autodesk is valid for a period of three (3) years from the date you purchased your license
to this Autodesk software.
You may modify, debug and relink Qt to this Autodesk software as provided under the
terms of the GNU Lesser General Public License v.2.1.
- 16 -
This Autodesk software contains QJson v 0.7.1. QJson is licensed under the GNU Lesser
General Public License v.2.1, which can be found at http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.txt. A text copy of this license is included on the DVD or with the
download of this Autodesk software. You may obtain a copy of the source code for QJson v
0.7.1 from www.autodesk.com/lgplsource or by sending a written request to:
Autodesk, Inc.
Attention: General Counsel
Legal Department
111 McInnis Parkway
San Rafael, CA 94903
Your written request must:
1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD)
with postage sufficient to cover the amount of the current U.S. Post Office First Class
postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces
from San Rafael, California USA to your indicated address; and
2. Identify:
a. This Autodesk software name and release number;
b. That you are requesting the source code for QJson v 0.7.1; and
c. The above URL (www.autodesk.com/lgplsource)
so that Autodesk may properly respond to your request. The offer to receive this QJson v
0.7.1 source code via the above URL (www.autodesk.com/lgplsource) or by written request
to Autodesk is valid for a period of three (3) years from the date you purchased your
license to this Autodesk software.
You may modify, debug and relink QJson to this Autodesk software as provided under the
terms of the GNU Lesser General Public License v.2.1
Portions related to QtService v 2.0 are Copyright (C) 2013 Digia Plc and/or its subsidiary(ies).
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met: Redistributions of source code
must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution. Neither the name of Digia Plc and its Subsidiary(-ies) nor
the names of its contributors may be used to endorse or promote products derived from
this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY
THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- 17 -
Portions relating to LevelDB v.1.6 are Copyright (c) 2011 The LevelDB Authors. All rights
reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
* Neither the name of Google Inc. nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
Portions relating to JSONCPP v.0.5 are Copyright (c) 2007-2010 Baptiste Lepilleur
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
- 18 -