Escolar Documentos
Profissional Documentos
Cultura Documentos
Forms
1 ) Go to SE73 SAPscript Font Maintenance to create or display the system bar codes.
Printer Bar code : To be able to use this method, the printer itself must be able to print bar
codes. Therefore, it must be possible to access the bar code via a simple escape sequence.
Frequently, you require a special bar code module for the printer.
The printing works as follows:SAP sends a simple printer escape sequence that activates the bar
code, then the bar code text in plaintext and finally a sequence that switches the printer back to
normal printing. In this way, therefore, the lines of the bar code are created by the printer itself.
Whether bar code printing is supported in this way can be seen from the note that the printer
manufacturer created within the Printer Vendor program.
- Supported documents: Sapscript, Smart Forms, (lists)
- Supported bar codes: All bar codes that are implemented in the printer/bar code module
- Supported printers/device types:All printers that are barcode-capable
- Display in print preview/PDF file supported: no
System Bar codes : In this way, SAP creates a graphic that contains the lines of the bar code.
SAP then prints this graphic. To be able to use this option, you must use transactionSE73(system
bar codes) to create a new system bar code because the SAP standard bar codes normally use the
old technology (option 1 or 2).
Supported documents: SAPscript, if you have implemented Note 1558595, Smartforms
Supported bar codes: Code39, Code93, Interleaved 2of5, Code128, PDF417
Supported printers/device types: PCL device types, PostScript device types, Prescribe device types,
Create new
RFID Generation-2 (Gen-2) tags are used for item level identification in retail environments.
Step : Select Normal BAR Code Allignment
1.
2.
3.
inverted -> scan direction is rotated by 180 degree from right to left
4.
bottom-up -> scan direction is rotated by 270 degree from bottom to top
Set the bar code parameters, width, height, etc., according to requirement as shown below.
Save the bar code definition. Here you have created a demo bar code as shown below.
Print Preview
Here we've used <C3> as we've created character formats C3 for barcode format .