Você está na página 1de 8

SAKTHI TRADERS

S.No Description Of Work


1 Earth Work
1.1

Unit

Earth work in excavation including clearing away


vegetation, if any, in foundations, trenches, drains etc.
in soft/loose soil as classified in the specifications in
both dry and wet conditions { including de-watering) up
to a depth of 3m. The rate shall include cost of all tools
& tackles, labours, stacking & spreading of excavated
soil within plant boundary, dressing of sides, ramming of
bottom. Excavation shall be measured as PCC
size+5OOmm on either sides.
Cum

Qty Unit Rate

100

400

Cum

500

550

Cum
Cum

100
100

1050
1300

Cum

300

155

Supplying and filling suitable earth in trenches, pliat h,


sides of foundations in layers not exceeding 200mm in
depth including consolidation of each layer by ramming
and watering. all complete
Cum

100

1100

100

195

43

4500

1.1.A Same as above but soft / hard rock ( not requiring


blasting)
1.1.1 Extra charges over rate for item 1.1 above for every
additional 3.0 meters lift or part therof
1.1.1.1 One Lift
1.1.1.2 Two Lift
1.2
Backfilling with above available excavated earth rn
trenches, plinth, sides of foundations in layers not
exceeding 200mm in depth including onsolidation of
each layer by ramming and watering, all complete
1.3

1.6
Disposal of surplus earth/ excavated material. by
mechanicatransport outside plant boundary as directed
by Engineer-in-Charge.
Cum
2 Concrete Works
2.1 Plain Concrete ( PCC)
2.1.1
Providing and laying machine mixed plain cement
concrete with cement. approved coarse sand and 40
mm nominal size graded coarse aggregate m the
proporuon of 1:4:8 including supply of all materials
labour and T & P required for proper completion of work
In foundations for all depths & thickness but excluding
shuttering
Cum
2.2 Re-inforced Cement Concrete ( RCC)

2.2.1

Providing and laying machine mixed cement concrete of


controlled grade of M2S, using 20 mm and down size
graded coarse aggregate of approved stone, approved
coarse sand and cement for structures reinforced
heavily or lightly including providing & mixing of any
integral compound, additives, placing concrete in
position in foundation and superstructures of any
required size and shape, all arrangements of hoisting,
transporting of concrete to its final pcs.uon, lorm.ng
pockets, leaving openings, providing and fixing sleeves,
embedding necessary inserts of any description, size
and shape.holding down bolts, hooks, angles, channels,
pipes, anchor plates etc. (all inserts holding down bolts,
anchor plates, pipes, bolts and nuts etc. shall be
measured and paid by weight under separate item)
Tamping, vibrating, curing, rendering and finishing if
required to give a smooth and even Surface etc. and
also including supply of all required materials, labour
T&P etc. required for proper completion of work, all
complete for the respective levels as under:
2.2.1.1 From+ 0.00 to -9.00 M
2.2.1.2 From + 0.00 to +9.00M
2.2.2
Same as item no 2.1.6 but controlled grade of M30
2.2.2.1 From + 0.00 to -9.00 M
2.2.2.2 From + 0.00 to +9.00M
3 Form Work
3.1

Providing and fixing in position to correct line level and


plumb plain form work in all shapes, sizes and
directions, of wooden, MS sheets, or any other approved
materials of rigid design, faces dressed with approved
form oil to prevent adhesion of concrete to forms etc.,
including splayed edges, notching, , including leaving
necessary recesses, openings for pockets, inserts etc.,
including providing and fixing all staging scaffoldings,
struts, braces, supports, props etc., including easing,
striking and removing formwork from site etc. all
complete. The rate should also include supply of all
materials, labour and T & P etc. required for satisfactory
completion of works all complete for the respective
levels as under

Cum
Cum

Cum
Cum

140
10

6300
6850

3.1.1 from + 0.00 to - 9.00 M


3.1.2 From + 0.00 to+ 9.00 M
4 Re-inforcement Steel
4.1

Sqm
Sqm

Supplying, straightening, cleaning, cutting, bending to


required shape and lengths as per Bar Bending
Schedules and placing of high yield strength deformed
bars conforming to IS-1786 having a minimum yield
stress 500 N/Sq.mm in all types of RCC work including
structures of slipform/curved constructions for all
heights and depths with proper cover blocks, supports,
chairs, spacers etc. fixing and binding of reinforcement
with 16 SWG black soft annealed wire (Binding wire will
not be measured and paid for). Only such dowels chairs,
pins etc. as approved by Engmeer- in-Charge shall be
measured and paid. The rate shall also include labour, T
& P, cost of binding wire, preparation of detailed bar
bending schedule (BBS) etc. required for proper
completion of work.
MT
11 Grouting
11.1
Providing and laying non-shrink grout Such as
"Conbextra GP2" or other equivalent grout as approved
by Engineer in-Charge including shuttering, vibrating/
temping, T & P, Labour, curing etc. all complete.
Cum

275
25

750
800

20

63000

0.5

80000

85000

10

4750

55

5250

6500

25

200

7000

11.2
Providing and laying cement concrete grout in
proportion 1:1:2 with 12mm and down graded
aggregates including shuttering, vibrating / tempimg, T
& P, Labour, curing etc. all complete.
Cum
14 Miscellaneous
14.3 Demolishing of PCC including disposal of material within
plant boundary
Cum
14.4 Demolishing of RCC including disposal of material within
plant boundary
Cum
14.6
Demolishing of structural steel including stacking of
serviceable material and disposal of unservicable
material within plant boundary.

MT

14.7
Demolishing of AC/ Metal sheeting including stacking of
serviceable material and disposal of unservicable
material within plant boundary.
Sqm
14.9 Dismantling of equipment including placing it at
designated place within plant boundary
Total

MT

Terms & Conditions


25% Advance along with purchase order
The Rate Of All Earth work Will be changed As per Site condition in future
Any extra work from above mentioned items shall be claimed as additional.
Quotation valid for 15 days from the date of quote.
After submission of Invoice, balance payment to be paid within 15 days from the date of invoice

Amount

40000
275000

105000
130000

46500

110000

19500

193500

Date
22/08/2015
Remarks

882000
68500

Rate Only
Rate Only

206250
20000

1260000

40000

85000

47500
288750

13000

5000
35000
3870500

date of invoice

Você também pode gostar