Escolar Documentos
Profissional Documentos
Cultura Documentos
• Simulation:
– WinIQSIM2
Compatibility
• Models:
– LTE Communication
Module
– RF Models
• User-Experience:
– Measurements
– Filter Design UI
• And more
–…
© 2009 AWR Corporation
Simulation: R&S WinIQSIM2 Integrated
VSS Complex
source
WinIQSIM2
will appear WinIQSIM2 interface used to
in AWRDE define signal and IQ data
project tree “loaded” as a data file into VSS
to accessed by complex source
TxOut Lvl_dBm = 0
TxOut Lvl_dBm_vals :
TxOut Lvl_dBm :
ALIGN
VSA
SUBCKT I D=A3
N= ID=EVM
ID=S1 VARNAME="TxOutLvl_dBm"
NET="LT E_DL_TX" REEVAL=
VALUES=TxOutLvl_dBm_vals
Fram eType=FrameType SUBCKT CORRDLY=
SUBCKT DLYCOMP=Yes TP
N_RB_DL=N_RB ID=S3 ID=S2
OutLvl_dBm =T xOutLvl_dBm NET="DUT" I NTRPSPN=0 I D=Ref
NET="LTE_DL_RXM"
CarrierFreq_M Hz=CarrierFreq_MHz DCof fset =20e-3 TP GAINCOMP=Power
TP TP Fram eType=FrameType ID=TP1 PHSCOMP=Rotation & reversal SRC MEAS
RND_D ModType=ModType AM PIMBAL=0.2 N_RB_DL=N_RB
I D=A1 MapperMode=MapperMode I D=DUT_in PHAI MBAL=2 I D=DUT _out SMPLPTS=
MapperMode=MapperMode
M=2 PrecodingMode=PrecodingM ode PrecodingMode=PrecodingMode 1 3
RATE=
Data (cod e wo rd 0 ) DUT
1 4 1 5 2 4
D0 LTE LTE D0
2 5 2 DL 6
D1 DL D1 5 6
RND_D 3 TX 6 3 RX 7
I D=A4 C C
M=2 7 4 TP
RATE= T0 T1 I D=Meas
Data (cod e wo rd 1 ) 8 9
RND_D
ID=A2
LTE Downlink TX DUT LTE Downlink RX
M=2
RATE=
PDC CH
• RF switches
– Single Pole n-Throw and Double Pole Double-Throw
• P1dB and IP3 parameters
• Static and Dynamic
• RF digital and RF analog phase shifter
– Digital phase shifter use digital control word and analog use a real
control signal
• Static and Dynamic
• RF delay blocks
– Adds appropriate frequency dependent phase shift to signal
• Static and Dynamic
• Antenna Models
– Receive and Transmit Parameters:
Gain
TX_ANTENNA Loss
ID=S1
ANTGAIN=0 dB Effective Area
NOISE=Auto
Temperature
Polarity
Power flux density as
input level
….
© 2009 AWR Corporation
Measurements: RF Budget™ (RFB)
• RFB
– C_IPHS_NOISE – cascaded integrated phase noise
– C_PHS_NOISE – cascaded phase noise
– C_S11 – cascaded input reflection
– C_S22 – cascaded output reflection
22 Microwave Office
21 (fundamental) in red
20
19 RFB 8.05
18
0 2 4 6 8 10 12 14 16 18 20
Pin (dBm)
Info.
Displayed
Tracking Bar