Escolar Documentos
Profissional Documentos
Cultura Documentos
Issue
V0.5
Date
2011-03-30
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
MRFUd Description
Contents
Contents
1 Introduction.................................................................................1
2 Technical Specifications.................................................................3
2.1 Frequency Band.................................................................................................................................................3
2.2 Capacity.............................................................................................................................................................3
2.3 Receiver Sensitivity...........................................................................................................................................4
2.4 Output Power.....................................................................................................................................................4
2.5 Power Consumption...........................................................................................................................................7
ii
Introduction
The MRFUd can be used in an enhanced indoor cabinet or an enhanced protective outdoor
cabinet. The MRFUd performs modulation, demodulation, data processing, and combination
and division of baseband signals and RF signals. With the Software Defined Radio (SDR)
technology, the MRFUd can work either in GU or GL dual-mode through software
configuration modification.
MRFUd has a dual-transmitter and dual-receiver structure, which supports higher output
power and carrier capacity.
Figure a.1shows the MRFUd.
Figure a.1 MRFUd
To meet the requirements for radio network deployment, the BBU3900 and MRFUd are
connected through a CPRI interface that uses an electrical or optical cable to transmit CPRI
signals.
MRFUd Description
2 Technical Specifications
The BBU3900 and the MRFUd are connected in dual-star topology. That is, the CPRI port on
the GTMU is connected to CPRI0 on the MRFUd, and the CPRI port on the WBBP or LBBP
is connected to CPRI1 on the MRFUd, as shown in Figure a.2.
Figure a.2 Dual-star topology
Technical Specifications
900MHz
880915
925960
1800MHz
1,7101,785
1,8051,880
2.2 Capacity
Figure a.1 Capacity
Mode
Capacity
GSM
UMTS
GSM+UMTS
G1U1G2U1G1U2G2U2
LTE
MRFUd
GSM+LTE
11.435101520MHz per PA
21.435101520MHz per PA
MRFUd G1L1G2L1G3L1G4L1G5L1G6L1
The LTE bandwidth can be 1.435101520MHz
MRFUd Description
2 Technical Specifications
Receiver Sensitivity
UMTS
125.5 dBm
GSM
LTE
113.7 dBm
114dBm
105.8 dBm
m to 4500m; and is 2 dB lesser than the standard power when the MRFUd is located at a height of 4500
m to 6000m.
Factors such as the site-to-site distance, frequency-reuse factor, power control algorithm, and traffic
model affect the gain achieved by dynamic power allocation. Therefore, in most cases, the network
planning can be based on the power specification achieved by dynamic power allocation.
Power sharing cannot be used together with RAN sharing with BSS and RAN, concentric cell, Co-BCCH,
and IBCA.
In power sharing mode, the power control and DTX must be set to ON.
Power sharing assumes a random distribution of UEs in the cell.
Ther symbol * indicates that the default configuration is 40W, if 60W or 80W is required, you must
Figure a.1 lists the typical configurations of the MRFUd at 900 MHz or 1800 MHz in
compliance with the specifications for multi-carrier base station in EN 301 502 V9.2.1.
Figure a.1 Typical configurations of the MRFUd (900 MHz or 1800 MHz)
Numb
er of
GSM
Carrier
s
Numbe
r of
UMTS
Carrier
s
Numb
er of
LTE
Carrier
s
Output
Power per
GSM
Carrier (W)
Output
Sharing
Power per
GSM Carrier
(W)
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE
Carrier
(W)
40(default)*
40(default)*
60(license)
60(license)
80(license)
80(license)
MRFUd Description
2 Technical Specifications
Numb
er of
GSM
Carrier
s
Numbe
r of
UMTS
Carrier
s
Numb
er of
LTE
Carrier
s
Output
Power per
GSM
Carrier (W)
Output
Sharing
Power per
GSM Carrier
(W)
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE
Carrier
(W)
40(default)*
40(default)*
60(license)
60(license)
80(license)
80(license)
40
40
40
40
27
30
27
30
20
27
20
27
80
80
40
40
25
25
1(MIMO)
260
2(MIMO)
240
3(MIMO)
225
4(MIMO)
220
260
Carrier1
240
Carrier2
240
80
80
40
80
80
40
40
40
40
240
MRFUd Description
2 Technical Specifications
Numb
er of
GSM
Carrier
s
Numbe
r of
UMTS
Carrier
s
Numb
er of
LTE
Carrier
s
Output
Power per
GSM
Carrier (W)
Output
Sharing
Power per
GSM Carrier
(W)
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE
Carrier
(W)
40
240
30
220
30
220
20
220
15
220
MRFUd Description
2 Technical Specifications
power control and DTX are enabled. The maximum power consumption for GSM is reached when the
base station works with 100% load.
The typical power consumption for UMTS is reached when the base station works with 40% load. The
maximum power consumption for UMTS is reached when the base station works with 100% load.
The typical power consumption for LTE is reached when the base station works with 50% load. The
maximum power consumption for LTE is reached when the base station works with 100% load.
The power consumption listed in Figure a.1 is based on the condition that the enhanced cabinet is used.
MRFUd Description
2 Technical Specifications
Item
Specification
BTS3900
Mode900MH
z/1800MHz
Configuration
Typical Power
Consumption
(W)
Maximum
Power
Consumption
(W)
GSM
32
20
750
885
34
20
855
1170
36
20
1155
1710
GSM 3 2 +
UMTS 3 1
20/20
955
1135
GSM 3 3 +
UMTS 3 1
20/20
985
1270
GSM 3 4 +
UMTS 3 1
20/20
1210
1585
GSM 3 2 +
LTE3 1
20/40
1410
1765
GSM 3 3 +
LTE3 1
20/40
1560
1945
GSM 3 4 +
LTE3 1
20/40
1530
2065
31
20
720
795
32
20
795
960
LTE
31
40
1110
1395
Mode900MH
z/1800MHz
Configuration
Typical Power
Consumption
(W)
Maximum
Power
Consumption
(W)
GSM
32
20
795
930
34
20
900
1215
36
20
1200
1755
GSM 3 2 +
UMTS 3 1
20/20
1000
1180
GSM 3 3 +
UMTS 3 1
20/20
1030
1315
GSM 3 4 +
UMTS 3 1
20/20
1255
1630
GSM 3 2 +
LTE3 1
20/40
1455
1810
(48V)
GSM+UMTS
GSM+LTE
UMTS
BTS3900
L
(48V)
GSM+UMTS
GSM+LTE
MRFUd Description
Item
Specification
GSM 3 3 +
LTE3 1
20/40
1605
1990
GSM 3 4 +
LTE3 1
20/40
1575
2110
31
20
765
840
32
20
840
1005
LTE
31
40
1155
1440
Mode900MH
z/1800MHz
Configuration
Typical Power
Consumption
(W)
Maximum
Power
Consumption
(W)
GSM
32
20
760
895
34
20
865
1180
36
20
1165
1720
GSM 3 2 +
UMTS 3 1
20/20
965
1145
GSM 3 3 +
UMTS 3 1
20/20
995
1280
GSM 3 4 +
UMTS 3 1
20/20
1220
1595
GSM 3 2 +
LTE3 1
20/40
1420
1775
GSM 3 3 +
LTE3 1
20/40
1570
1955
GSM 3 4 +
LTE3 1
20/40
1540
2075
31
20
730
805
32
20
805
970
31
40
1120
1405
UMTS
BTS3900
A
2 Technical Specifications
(48V)
GSM+UMTS
GSM+LTE
UMTS
LTE
MRFUd Description
2 Technical Specifications
Abbreviation
Full Name
3GPP
AMR
BBU
Baseband Unit
BER
CPRI
DTX
Discontinuous Transmission
ETSI
GTMU
LBBP
LTE
MIMO
MRFUd
RAN
RF
Radio Frequency
RNC
RX
Receive
SDR
UMTS
WBBP
10