Você está na página 1de 9

POLYTECHNIC SULTAN MIZAN ZAINAL ABIDIN

DEPARTMENT OF CIVIL ENGINEERING


SESSION: JUN 2014
LESSON PLAN
PROGRAMME
COURSE CODE
COURSE NAME
NAME OF LECTURER

:
:
:
:

DKA1 S2
DCC1012
ENGINEERING DRAWING AND COMPUTER AIDED DRAFTING
DULIANA BINTI DAUD

COURSE LEARNING OUTCOME (CLO)


Upon completion of this course, the student will be able to:
1. Apply the correct principle to produce civil engineering drawing. (C3, PLO1)
2. Construct 2D engineering drawing precisely using CAD application. (P3, PLO5)
3. Complete engineering drawing correctly by manual and CAD application. (P4, PLO5)

WEEK

COURSE CONTENTS

W1
15/06/14
19/06/14

REFLECTION / CQI / NOTES


REGISTRATION WEEK

ED = Engineering Drawing
1.0 GEOMETRY

Briefing on the Course Outline, assessments, SLT, requirements of


this course, etc.
- Course outline

W2
22/06/14
26/06/14

1.1 Know the use of the different drawing instruments, equipments and
materials.
1.1.1 Describe different types of drawing instruments, equipments
and materials.
1.1.2 Explain how to use the various instruments and equipments
CAD = Computer Aided Drafting
6.0 INTRODUCTION TO CAD
6.1 Understand the use of the computer in the drafting process
6.1.1 Recognize and describe the main parts of the screen of AutoCAD
and command references.
6.1.2 Recognize and explain the different coordinate systems

P&P-04(1)(P01)(20-11-13)

WEEK

COURSE CONTENTS

REFLECTION / CQI / NOTES

ED = Engineering Drawing
First FRP check

1.0 GEOMETRY (Conti.)


1.2 Apply the essentials in graphical communication

1.2.1

W3
29/06/14
03/07/14

Draw the various conventional representations in graphical


production of construction line, border line, drawing line,
cutting plane line, hidden line, centre line, break line and
others.
1.2.2 Produce layout in drawing sheets with the margin and title
block.
1.2.3 Construct letters of various forms and characters
CAD = Computer Aided Drafting
6.0 INTRODUCTION TO CAD (Conti.)
6.2 Apply the command references
6.2.1 Explain the use of OSNAP facility to select options
6.2.2 Demonstrate how to; change the size of the drawing field and
save drawings
Assignment 4 (Chapt. 6)

W4
06/07/14
10/07/14

ED = Engineering Drawing
First FRP check

1.0 GEOMETRY (Conti.)


1.3 Complete the construction of simple geometric figures and shapes
1.3.1 Produce parallel and perpendicular lines.
1.3.2 Construct and bisect lines and angles.
1.3.3 Divide a straight line into given number of equal parts.
CAD = Computer Aided Drafting
7.0 DRAW COMMANDS
7.1 Understand how to construct simple geometric shapes using the draw
commands
7.1.1 Explain how to draw lines, circles, ellipses, arcs, polygons and

P&P-04(1)(P01)(20-11-13)

WEEK

COURSE CONTENTS
squares to given dimensions

ED = Engineering Drawing
1.0 GEOMETRY (Conti.)
1.3.4 Draw regular polygons with; N sides in a given circle a given
side length and of N side on a straight line.
1.3.5 Carry out simple geometrical constructions on circles for
example the diameter of a circle given the circumference, a
circle to pass through 3 points, tangents to circles at various
points, an arc externally tangent to two circles and others.
1.3.6 Construct an ellipses by using; Four Center Method and
Concentric Circle Method.
W5
13/07/14
17/07/14

Test 1 (Chapt. 1)
Assignment 1 (Chapt. 1)
CAD = Computer Aided Drafting
7.0 DRAW COMMANDS (Conti.)
7.1.2 Describe how to hatch the shapes drawn, change the hatch
pattern and scale

W6
20/07/14

ED = Engineering Drawing

P&P-04(1)(P01)(20-11-13)

REFLECTION / CQI / NOTES

WEEK

COURSE CONTENTS

REFLECTION / CQI / NOTES

2.0 ISOMETRIC AND OBLIQUE DRAWING


2.1 Know the construction of isometric and oblique drawings and
projections.
2.1.1
Produce drawing in isometric and oblique forms; Square, Circle,
Ellipse and Polygon with a minimum of eight sides.
24/07/14
CAD = Computer Aided Drafting
7.0 DRAW COMMANDS (Conti.)
7.2 Produce a drawing of simple geometric shapes
W7
27/07/14
31/07/14

MID SEMESTER BREAK


ED = Engineering Drawing
2.0 SOMETRIC AND OBLIQUE DRAWING (Conti.)
2.1.2 Construct a dimension for holes, circles and angles correctly in
isometric and oblique drawings.

W8
03/08/14
07/08/14

CAD = Computer Aided Drafting


7.0 DRAW COMMANDS (Conti.)
7.2 Produce a drawing of simple geometric shapes
Assignment 5 (Chapt. 7)

P&P-04(1)(P01)(20-11-13)

Hari Raya Aidilfitri 28 & 29/07/14

WEEK

COURSE CONTENTS
ED = Engineering Drawing
3.0 ORTHOGRAPHIC PROJECTIONS

W9
10/08/14
14/08/14

3.1 Understand the principles of orthographic projections.


3.1.1
Illustrate the principle planes of projection; vertical plane and
horizontal plane.
3.1.2
Illustrate views of three-dimensional objects onto the basic
planes of projection in both first and third angle to obtain the;
front view or elevation and top view or plan.
CAD = Computer Aided Drafting
8.0 MODIFY COMMANDS
8.1 Understand the different modify commands.
8.1.1 Describe how to use modify commands.
i. Move objects accurately using move icon.
ii. Copy objects from one position to another accurately using
copy icon.
8.1.2 Explain how to; erase objects, trim and extend objects, fillet
and chamfer angles
ED = Engineering Drawing
3.0 ORTHOGRAPHIC PROJECTIONS (Conti.)
3.1.3 Illustrate views of three-dimensional objects onto the basic
planes of projection in both first and third angle to obtain the;
front view or elevation and top view or plan.

W10
17/08/14
21/08/14

Assignment 2 (Chapt. 2 and 3)


CAD = Computer Aided Drafting
8.0 MODIFY COMMANDS (Conti.)
8.2 Apply the different modify commands
8.2.1 Demonstrate how to use; Polar and Rectangular Array command
Offset command
8.3 Produce a drawing of simple geometric shapes.
Assignment 6 (Chapt. 8)

P&P-04(1)(P01)(20-11-13)

REFLECTION / CQI / NOTES

WEEK

COURSE CONTENTS
ED = Engineering Drawing
4.0 SECTIONAL VIEW

W11
24/08/14
28/08/14

4.1 Understand the sectional view.


4.1.1
Describe the sectional view, longitudinal section, cross section,
cutting plane, cutting plane line and sectional line.
4.1.2
Identify the types of sectioning needed.
4.1.3
Illustrate and draw two types of cutting plane lines accordingly.
CAD = Computer Aided Drafting
9.0 CREATE LAYERS AND DIMENSIONS
9.1 Understand how to create layers
9.1.1 Describe how to create layers change color of layers
change the line types of a layer move objects from one layer to
another switch layer on and off.
ED = Engineering Drawing
4.0 SECTIONAL VIEW (Conti.)
4.2 Apply the different types of sectional views.
4.2.1 Construct the following sectional views; Full Section, Half
Section and Offset Section

W12
31/08/14
04/09/14

Assignment 3 (Chapt. 4)
CAD = Computer Aided Drafting
9.0 CREATE LAYERS AND DIMENSIONS (Conti.)
9.1.2 Explain how to create dimensions create linear, aligned and
angular dimensions create radius and diameter dimensions add
tolerances to dimensions edit Dimension

P&P-04(1)(P01)(20-11-13)

REFLECTION / CQI / NOTES

WEEK

COURSE CONTENTS
ED = Engineering Drawing
5.0 BUILDING DRAWING
5.1 Accomplish the production of building drawing in standard format.
5.1.1
Draw a simple plan for a single storey building.

W13
07/09/14
11/09/14

CAD = Computer Aided Drafting


9.0 CREATE LAYERS AND DIMENSIONS (Conti.)
9.2 Apply how to create leader lines in drawing
9.2.1 Demonstrate how to create leader lines, Single Line Text,
Multiline Texts, Edit Text
9.2.2 Construct the title block for a drawing

ED = Engineering Drawing
5.0 BUILDING DRAWING (Conti.)
5.1.2

W14
14/09/14
18/09/14

Illustrate a front and side view for a single storey building.

CAD = Computer Aided Drafting


9.0 CREATE LAYERS AND DIMENSIONS (Conti.)
9.3 Produce a simple drawing using layers command.

Test 2 ( Chapt. 6, 7, 8 and 9)


P&P-04(1)(P01)(20-11-13)

REFLECTION / CQI / NOTES

WEEK

COURSE CONTENTS
ED = Engineering Drawing
5.0 BUILDING DRAWING (Conti.)
5.1.3

W15
21/09/14
25/09/14

Illustrate a vertical section for a single storey building.

CAD = Computer Aided Drafting


10.0 CAD PROJECT
10.1 Complete CAD project
10.1.1 Accomplish an engineering drawing according to standard
format
ED = Engineering Drawing
5.0 BUILDING DRAWING (Conti.)
5.1.4 Complete a detailed drawing for a single storey building

W16
28/09/14
02/10/14

CAD = Computer Aided Drafting


10.0 CAD PROJECT (Conti.)
10.1.2 Handle the Plotter/Printer Setting and plot the drawing

CAD = Computer Aided Drafting


10.0 CAD PROJECT (Conti.)
10.1.3 Complete project report comprises of; project summarize
drawing

W17
05/10/14
09/10/14

Assignment 7 (Chapt. 10)


P&P-04(1)(P01)(20-11-13)

REFLECTION / CQI / NOTES

WEEK

COURSE CONTENTS

REFLECTION / CQI / NOTES

CAD = Computer Aided Drafting


10.0 CAD PROJECT (Conti.)
10.1.3 Complete project report comprises of; project summarize
Drawing.

W18
12/10/14
16/10/14

Mini Project (Chapt. 10)


Deepavali 23.10.14

W19
19/10/14
23/10/14

FINAL EXAMINATION

W20
26/10/14
30/10/14

FINAL EXAMINATION

W21
02/11/14
06/11/14

FINAL EXAMINATION

Second FRP check


Awal Muharam 25/10/2014
Second FRP check

Prepared by :

Approved by :

Signature of Course Lecturer


Date :

Signature of Deputy Director (Academic)/


Head of Department/Unit/Programmed
Date :

P&P-04(1)(P01)(20-11-13)

Você também pode gostar