Escolar Documentos
Profissional Documentos
Cultura Documentos
1 for Pro/ENGINEERTM
Release Notes, v8.1.0 (2008.0625)
General
These release notes are divided into the following sections:
Supported Platforms and Pro/ENGINEER Releases
Whats New
Bug Fixes
Requesting a CETOL 6 License File
Installing the CETOL 6 Software
Known Issues in Current Release
Operating System
Intel x86
Intel x86
For WF2.0 and WF4.0, the Pro/E release code represents the specific release of Pro/ENGINEER
that CETOL 6 v8.1 for Pro/ENGINEER was built against. Connecting CETOL 6 v8.1 to older
builds of Pro/ENGINEER is possible, but is not recommended. (NOTE: the CETOL Wildfire 4.0
release is a separate installer and binary from the CETOL for Wildfire 2.0/3.0 release. It will
NOT work with Pro/ENGINEER Wildfire 2.0/3.0, or vice-versa.)
Whats New
Version 8.1.0
GD&T Support
CETOL now supports modeling and analysis of GD&T, equivalent to the GD&T support in v7.2.
The GD&T implementation is based on the current ASME and ISO standards, and includes all
location and orientation controls and all DRF cases. The GD&T implementation is fully
integrated into the existing CETOL functionality, including visualize sensitivities, quality metric
calculation, variation rules, statistical analysis, worst-case analysis, etc.
Version 8.0.0
Visualize Sensitivity
The CETOL modeler provides a new utility to view how the model responds to variations in a
specific dimension variable. The user specifies the measures to investigate, the variable to vary,
and the range of the variable. CETOL provides a plot of each measures response to the variable
and allows the user to animate the positions of the parts in the Pro/E window as the variable
value changes.
Re-Engineered Analyzer
Improved interaction between layout data lists and Analyzer property panels
Automated sensitivity and contribution plots
Improved measurements
Ability to highlight CAD geometry and tolerance model symbols from the analyzer
interface
Expanded visualization and highlighting of measure references, joint references, and
dimension references
Ability to find the tolerance model feature or part that corresponds to a specific Pro/E
feature or part
Headline
Linear dimension highlights are misleading
Some problems with feature origins and extents
End 1st line on About CETOL License Info tab cut off for large fonts
Problems with measure panel direction & locate button states
Cylinder feature angular extents initialized to 0.0
The interaction between options and Graph Display not correct
Property dialog layout looks bad when the window is enlarged
'Import' and 'Cannot Save' dialog messages have too much text
model element name Counters not reset when data deleted
"File has been modified" message after a save as.
Tree Level > Tolerances does not expand size or joint tolerances
"Reverse Outward Normal" for revolved features has no effect
Message is unclear when saving v7.2 data to a CXM file
CETOL crashes when selecting a diameter dimension
crash after cancelling visualize sensitivity calculation
Equivalent tab should be grayed out for all non-size variables.
misc v7.x import problems
Create option to save Error List generated from 7.2 file convert
The Interior/Exterior text should be displayed for a revolved feature
DRF Arrows disappear in MG when feature renamed
Measure panel noms don't update properly when there are multiple configs
No variables controlled by perpendicularity
Axial feature vars should be parallel to fully constrained ref axes
Highlights for many angular variables are wrong
Joint names don't update automatically in the Model Graph
CETOL crash on update property panel
highlight part/asm/comp context menu is missing
The title bar in the analyzer says "CETOL Modeler"
under-constrained config measures shown ready if config not active
Default bias for fastener joints always centered
Wrong joint types
Feature DOF states not updated immediately with new constraint
Undo/Redo of add constraint does not result in original state
Can't add data to attached assembly
DOF joint cases not always mapped to joint properly
Strange interaction between DOFs and bias options...
able to create duplicate DRF; valid datum not listed
v7.2 model conversion - over-constrained DOFs
Joints involving width and tabslot (drafted and undrafted) are inconsistent.
Duplicate size constraint created if you delete size and then cancel
Cancel does not work when reading CXM
Custom fields vs User fields terminology inconsistent
8.0.1
ID
CQDB00001052
CQDB00002025
CQDB00005004
CQDB00005047
Headline
Highlight of angular dim between two planes is a little confusing
Can't discern positive direction for zero-value linear variables.
The location of the highlight for angular dims does not make sense
Property view width is dependent on joint name