Você está na página 1de 2

DC50C Series

12 or 24V DC powered, compact, submersible pump


Mode Note:
DC50C-XXXXX

T(2 phase), S(3 phase), A(3 phase adjustable)


Head: 30 means the pump head is 3m
Voltage: 12 means the voltage is 12V DC
Differentiate inlet & outlet from DC 50
Means the diameter of pump around 50mm
Means the pump is brushless dc pump

Advantages of our pumps


T

Note: DC50C is divided into three series, refer to the Mode note.

Specifications
NO
1
2
3
4
5
6
7

Items
Sizes
Weight
Dimension of inlet
Dimension of outlet
Phase
Pump material
Max working temperature
Model

DC50C-1220T
DC50C-1220S
DC50C-1220A
DC50C-1230S
DC50C-1230A
DC50C-1240S
DC50C-1240A
DC50C-2430T
DC50C-2430S
DC50C-2430A
DC50C-2440T
DC50C-2440S
DC50C-2440A
DC50C-2450S
DC50C-2450A
DC50C-2465S
DC50C-2465A

Remarks

Voltage Current
V
A

Specs
107104.564 mm
480 g
20mm(1/2 inch thread)
20mm(1/2 inch thread)
Two phase or three phase
PA66+glass fiber (can be customized)
60C(2 phase) or 100C(3phase)
Max flow
L/H
G/H

Max head
M
ft

12

1.57

1300

343.5

6.6

12

1700

449.1

9.8

12

3.8

2150

568.0

13.1

24

1.5

1700

449.1

9.8

24

1.9

2150

568.0

13.1

24

2.9

2300

607.7

16.4

24

3.6

2450

647.3

6.5

21.3

The current above is starting current, when contact to


circulation system the current will cut down to 55%~65%
of Rated current.

High efficiency, compare with brushed DC pumps---BLDC


pumps are often more efficient at converting electricity
into mechanical power than brushed DC pumps. This
improvement is largely due to the absence of electrical
and friction losses due to brushes.
High efficiency, compare with AC pumps---BLDC pumps
are microprocessor-controlled to keep the stator current
in phase with the permanent magnets of the rotor,
requiring less current for the same effect and therefore
resulting in greater efficiency.
Safety---DC power, brushless, elimination of ionizing
sparks from the commentator. Can be used in explosive
environments.
Long lifespan---Unique internal cooling circuit allows the
cooling circuit liquid to continually wash front and rear
radial bearings, extending bearing and ceramic spindle
life. This design offers our pumps have a long lifespan in
excess of 30K hours.
Low noise---Our unique design offers our pumps have
sound levels lower than 40dB.
Submersible installed---Stator and circuit board sealed
by epoxy resin, which make sure our pumps 100% waterproof.
Applications---Our DC50C series pumps are perfect for
water circulation systems, aquariums, arts and crafts,
fountains, water circulating of home appliances, etc.
We also offer OEM service.

Difference between 2-phase and 3-phase


2-Phase

3-Phase

Driven by sensor which should be put inside the pump body


Driven by program, whole control circuit can be put outside
Speed adjustable by PWM, analog signals(0-5v) or potentiometer
Locked-rotor and reverse connection protection
Automatic overload protection and over-temperature protection
Soft start with low in-rush current, great for PV panel

Performance curves

Unit: mm

Fig.1 Dimensions

Fig.2

Caution:
1. Dry operation (operation without liquid in the pump) damages the pump. Be sure to fill the pump with priming liquid
in advance.
2. This pump is not the self-priming pump. The pump must be installed in a position lower than the liquid level of the
supply tank.(Fig.2)
3. Do not keep on operating the pump with entirely or almost closed discharge or/and suction side valves.
Baoan Shenzhen China
http://www.bldcpump.com/

Tel: 86-180-28764753

Email: Jarred@bldcpump.com

Você também pode gostar