Escolar Documentos
Profissional Documentos
Cultura Documentos
www.andhracolleges.com
⋆⋆⋆⋆⋆
3. Explain the working of a transformer at no load and full load conditions with neat
diagrams. [16]
www.andhracolleges.com
(b) A 150 KVA transformer has an iron loss of 1400 watts and full load copper
loss of 1600 watts. Find the Find the efficiency of a transformer at 50% full
load (i) upf I (ii) 0.8 pf lagging [8+8]
5. (a) Explain why a starter is necessary for starting of 3-phase Induction Motor?
Name the starters used for starting 3-phase Induction Motor.
(b) The power input to rotor of a 440V, 50Hz, 3-phase, 12-pole Induction Motor
is 75W. The rotor e.m.f has a frequency of 2Hz. Calculate
i. Slip
ii. rotor speed
iii. rotor copper loss
iv. mechanical power developed [8+8]
8. With a neat sketch explain in detail moving iron repulsion type instrument [16]
⋆⋆⋆⋆⋆
www.andhracolleges.com
www.andhracolleges.com
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications
2 ofUSA-UK-Australia-Germany-France-NewZealand
2 Universities List
www.andhracolleges.com
⋆⋆⋆⋆⋆
1. (a) The following data pertain to the magnetization curve of a D.C. shunt gener-
ator at 300 r.p.m.
If in Amps 0 0.2 0.3 0.4 0.5 0.6 0.7
EG in Volts 7.5 93 135 165 186 202 215
The field resistance of the machine is adjusted to 354.5Ω and the speed is 300prm.
For this generator, obtain
(a) Determine graphically the no-load voltage.
(b) Determine the critical value of the shunt field resistance.
(c) Determine the critical speed for the given field resistance
(d) What additional resistance must be added in the field circuit to reduce the
no-load voltage to 175V [16]
2. (a) What is the significance of the back e.m.f. of a D.C. Motor?
(b) Deduce the condition for maximum power for a D.C. Motor?
(c) A 230V DC shunt motor takes an armature current of 20A on a particular
www.andhracolleges.com
load. The armature circuit resistance is 0.5Ω . Find the resistance required in
series with the armature to reduce the speed by 50% if (i) the load torque is
constant and (ii) the load torque is proportional to the square of the speed.
[4+4+8]
3. (a) What is an ideal transformer . Derive an expression for induced emf in a
transformer in terms of frequency the maximum value of flux, and the number
of turns on the winding. [16]
4. (a) Define voltage regulation of a transformer. Deduce the expression for the
voltage regulation
(b) The number of turns on the primary and secondary windings of a single phase
transformer are 350 and 35 respectively. If the primary is connected to a 2.2
KV 50 HZ supply determine the secondary voltage. [8+8]
5. (a) Show that when a 3-phase supply is given to the stator winding of Induc-
tion Motor, it produces a rotating magnetic field of constant magnitude and
rotating at synchronous speed.
(b) A 12-pole, 3-phase Induction Motor is fed from 100Hz supply. If the frequency
of rotor e.m.f at full load is 5 Hz, find the Full-Load speed and %Slip [12+4]
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications
1 ofUSA-UK-Australia-Germany-France-NewZealand
2 Universities List
7. Show that a single phase winding when excited by a single phase supply produce
two equal and opposite revolving fields [16]
www.andhracolleges.com
8. (a) Discuss the classification of electrical instruments
(b) Explain the significance of controlling torque and damping torque relevant to
the operation Of indicating instruments. [8+8]
⋆⋆⋆⋆⋆
www.andhracolleges.com
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications
2 ofUSA-UK-Australia-Germany-France-NewZealand
2 Universities List
www.andhracolleges.com
⋆⋆⋆⋆⋆
1. (a) What purpose is served by the pole shoe in a D.C. machine? [4+4+4+4]
(b) What are the advantages and disadvantages of carbon brushes?
(c) Why do we use slotted armature in a D.C. machine?
(d) Why is armature winding placed on the rotor of a D.C. machine?
2. (a) Name different types of D.C. motors and state their application?
(b) A 240V DC shunt motor runs on no-load at 800rpm with no extra resistance
in the field or armature circuit, the armature current being 2A. Calculate the
resistance required in series with the shunt winding so that the motor may
run at 950rpm when taking a line current of 30A. Shunt winding resistance is
160Ω , armature resistance is 0.4Ω . Assume that flux is proportional to field
current. [6+10]
www.andhracolleges.com
4. (a) What are the different losses occuring in a transformer on load. How can these
losses be determined experimentallty. [16]
5. (a) Explain the power stages of a 3-phase Induction Motor and hence deduce
the relationship between copper loss, mechanical power developed and air-gap
power of an Induction Motor.
(b) A 11KW, 3-phase, 6-pole, 50Hz, 400V Induction Motor runs at 960 r.p.m. on
full-load. If it takes 80A on Direct On Line switching, find the ratio of starting
torque to full-load torque when started by star-delta starter, taking efficiency
95.6% and p.f. 0.834. [12+4]
7. Show that a single phase winding when excited by a single phase supply produce
two equal and opposite revolving fields [16]
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications
USA-UK-Australia-Germany-France-NewZealand Universities List
1 of 2
www.andhracolleges.com Engineering-MBA-MCA-Medical-Pharmacy-B.Ed-Law Colleges Information
www.andhracolleges.com The Complete Information About Colleges in Andhra Pradesh
⋆⋆⋆⋆⋆
www.andhracolleges.com
www.andhracolleges.com
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications
2 ofUSA-UK-Australia-Germany-France-NewZealand
2 Universities List
www.andhracolleges.com
⋆⋆⋆⋆⋆
1. (a) Discuss the internal and external characteristics of a D.C. shunt generator
(b) A Separately excited generator, when running at 1200rpm supplies 200A at
125V to a circuit of constant resistance. What will be the current when the
speed is dropped to 1000rpm If the field current is unaltered? Armature
resistance is 0.04Ω. Total drop at brushes is 2V. Ignore change in armature
reaction. [10+6]
2. (a) Explain the principle of operation of a DC motor. Derive the equation for the
torque developed by a DC motor.
(b) A 220V shunt motor has am armature circuit resistance of 0.2Ω and field
circuit resistance of 110 Ω . At no load the motor takes 5A and runs at 1500
r.p.m. if the motor draws 52A at rated voltage and rated load, calculate the
motor speed and its rated shaft torque in N-m. The rotational losses at no
load and full load are the same. Neglect armature reaction. [8+8]
3. How do you classify the transformers and also discuss the different parts of trans-
former in detail [16]
www.andhracolleges.com
4. (a) What are the different losses occurring in a transformer. How can these losses
be determined experimentally. [16]
5. (a) Show that when a 3-phase supply is given to the stator winding of Induc-
tion Motor, it produces a rotating magnetic field of constant magnitude and
rotating at synchronous speed.
(b) A 12-pole, 3-phase Induction Motor is fed from 100Hz supply. If the frequency
of rotor e.m.f at full load is 5 Hz, find the Full-Load speed and %Slip [12+4]
7. Explain with neat diagrams the following types of single phase induction motors
www.andhracolleges.com
⋆⋆⋆⋆⋆
www.andhracolleges.com
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications
2 ofUSA-UK-Australia-Germany-France-NewZealand
2 Universities List