Escolar Documentos
Profissional Documentos
Cultura Documentos
Page 1 of 12
Footing No.
-
Group ID
-
Length
Foundation Geometry
Width
Thickness
88.000 in
88.000 in
10.000 in
Footing No.
Footing Reinforcement
Pedestal Reinforcement
Bottom Reinforcement(Mz)
Bottom Reinforcement(Mx)
Top Reinforcement(Mz)
Top Reinforcement(Mx)
Main Steel
Trans Steel
10M @ 7 in c/c
10M @ 7 in c/c
10M @ 7 in c/c
10M @ 7 in c/c
N/A
N/A
Isolated Footing 1
Input Values
Footing Geomtery
Design Type : Calculate Dimension
Footing Thickness (Ft) : 10.000 in
Footing Length - X (Fl) : 10.000 in
Footing Width - Z (Fw) : 10.000 in
Eccentricity along X (Oxd) : 0.000 in
Eccentricity along Z (Ozd) : 0.000 in
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 2 of 12
Column Dimensions
Column Shape : Rectangular
Column Length - X (Pl) : 12.000 in
Column Width - Z (Pw) : 12.000 in
Pedestal
Include Pedestal? No
Pedestal Shape : N/A
Pedestal Height (Ph) : N/A
Pedestal Length - X (Pl) : N/A
Pedestal Width - Z (Pw) : N/A
Design Parameters
Concrete and Rebar Properties
Unit Weight of Concrete : 150.000 lb/ft3
Strength of Concrete : 4.000 ksi
Yield Strength of Steel : 60.000 ksi
Minimum Bar Size : 10M
Maximum Bar Size : 55M
Minimum Bar Spacing : 2.000 in
Maximum Bar Spacing : 9.000 in
Pedestal Clear Cover (P, CL) : 2.000 in
Footing Clear Cover (F, CL) : 2.000 in
Soil Properties
Soil Type : Drained
Unit Weight : 14.000 kN/m3
Soil Bearing Capacity : 90.000 kN/m2
Soil Surcharge : 0.000 ksi
Depth of Soil above Footing : 0.000 in
Cohesion : 0.000 kip/ft2
Min Percentage of Slab : 0.000
10.000 in
10.000 in
10.000 in
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 3 of 12
1
2
1
2
Axial
(kip)
68.034
47.247
1
2
Axial
(kip)
68.034
47.247
LC
Shear X
(kip)
4.058
2.700
Shear Z
(kip)
0.697
-5.543
Moment X
(kip-in)
33.317
-450.180
Moment Z
(kip-in)
-209.595
-130.179
Shear X
(kip)
4.058
2.700
Shear Z
(kip)
0.697
-5.543
Moment X
(kip-in)
33.317
-450.180
Moment Z
(kip-in)
-209.595
-130.179
------------------------------------------------------
Design Calculations
Footing Size
Initial Length (Lo) = 10.000 in
Initial Width (Wo) = 10.000 in
Uplift force due to buoyancy = 0.000 kip
Effect due to adhesion = 0.000 kip
Footing area from initial length and width, Ao =
Lo x W o =
100.000 in 2
P / qmax =
5218.598 in 2
Length (L2) =
88.000
in
#2
Width (W2) =
88.000
in
#2
Depth (D2) =
10.000
in
#2
7744.000
in2
Area (A2) =
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 4 of 12
Pressure at
corner 1 (q1)
Pressure at
corner 2 (q2)
Pressure at
corner 3 (q3)
Pressure at
corner 4 (q4)
Area of footing
in uplift (Au)
(kip/in2)
(kip/in2)
(kip/in2)
(kip/in2)
(in2)
0.0100
0.0128
0.0039
0.0011
0.000
0.0100
0.0128
0.0039
0.0011
0.000
0.0071
0.0115
0.0122
0.0078
0.000
0.0071
0.0115
0.0122
0.0078
0.000
Load Case
If Au is zero, there is no uplift and no pressure adjustment is necessary. Otherwise, to account for uplift, areas of negative
pressure will be set to zero and the pressure will be redistributed to remaining corners.
Summary of adjusted Pressures at Four Corner
Load Case
Pressure at
corner 1 (q1)
Pressure at
corner 2 (q2)
Pressure at
corner 3 (q3)
Pressure at
corner 4 (q4)
(kip/in2)
(kip/in2)
(kip/in2)
(kip/in2)
0.0100
0.0128
0.0039
0.0011
0.0100
0.0128
0.0039
0.0011
0.0071
0.0115
0.0122
0.0078
0.0071
0.0115
0.0122
0.0078
Load Case
No.
Along XDirection
Along ZDirection
About XDirection
About ZDirection
9.210
53.639
81.650
13.148
9.996
4.868
4.697
15.108
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding X
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 5 of 12
Direction
Critical Load Case for Sliding along X-Direction : 1
Governing Disturbing Force : 4.058 kip
Governing Restoring Force : 37.378 kip
Minimum Sliding Ratio for the Critical Load Case : 9.210
Critical Load Case for Overturning about X-Direction : 2
Governing Overturning Moment : -505.607 kip-in
Governing Resisting Moment : 2374.642 kip-in
Minimum Overturning Ratio for the Critical Load Case : 4.697
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding Z
Direction
Critical Load Case for Sliding along Z-Direction : 2
Governing Disturbing Force : -5.543 kip
Governing Restoring Force : 26.985 kip
Minimum Sliding Ratio for the Critical Load Case : 4.868
Critical Load Case for Overturning about Z-Direction : 1
Governing Overturning Moment : -250.178 kip-in
Governing Resisting Moment : 3289.266 kip-in
Minimum Overturning Ratio for the Critical Load Case : 13.148
------------------------------------------------------
Shear Calculation
= 7.778in
= 62.143 kip
(not less than
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 6 of 12
)
Where,
= Resistance factor of concrete=0.6
(Clause No 8.4.2)
=Factor to account concrete density=1
(Clause No 8.6.5)
Bw= Section width
d= Effective depth (Clause No 11.0)
V< Vr hence,
safe
= 7.778in
= 62.143kip
V< Vr hence,
safe
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 7 of 12
= 0.274203
kip/in2
Vr2 =
= 0.271119
kip/in2
Vr3 =
= 0.182802
kip/in2
Along X Axis
Bar diameter corresponding to max bar size (db) = 30mm
As Per CSA A23.3-04 Clause 12.2.2
Development Length(ld) =
= 34.718 in
Allowable Length(ldb) =
= 36.000 in
ldb >ld hence, safe
Along Z Axis
Bar diameter corresponding to max bar size(db) = 30mm
As Per CSA A23.3-04 Clause 12.2.2
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 8 of 12
Development Length(ld) =
= 34.718 in
Allowable Length(ldb) =
= 36.000 in
ldb >ld hence, safe
Along Z Axis
= 0.251%
Where,
=0.85-0.0015Xfc from Clause 10.1.7
=0.6 from Clause 8.4.2
=0.85 from Clause 8.4.3.
As Per Clause No 7.8.1 and Eqn 10.5.1.2
(a)
Minimum Area of Steel (Astmin)= 0.2% of Gross Cross Section = 1135.482 mm2
Calculated Area of Steel (Ast) = 986.973 mm2
If foundation falls under deep flexural members criteria per Clause 10.7.1;
Reinforcement is calculated per CSA part II 9.4.5
Provided Area of Steel (Ast,Provided) = 1135.482 mm2
Astmin<= Ast,Provided Steel area is accepted
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 9 of 12
Along X Axis
= 0.023%
Where,
=0.85-0.0015 X fc from Clause 10.1.7
=0.6 from Clause 8.4.2
=0.85 from Clause 8.4.3.
As Per Clause No 7.8.1 and Eqn 10.5.1.2
(a)
Minimum Area of Steel (Astmin)= 0.2% of Gross Cross Section = 1135.482 mm2
Calculated Area of Steel (Ast) = 1106.541 mm2
If foundation falls under deep flexural members criteria per Clause 10.7.1;
Reinforcement is calculated per CSA part II 9.4.5
Provided Area of Steel (Ast,Provided) = 1135.482 mm2
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 10 of 12
Along Z Axis
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 11 of 12
Along X Axis
------------------------------------------------------
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016
Page 12 of 12
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
23/03/2016