Escolar Documentos
Profissional Documentos
Cultura Documentos
RESET E#5
M may , vao SP# 97 --> Enter --> tat roi m cong tac chnh .
SERVICE CALL
E# 11 : Exposure Lamp Error
The feed back signal becomes higher than 4.2 volts (rms) for 1.0 second
when the exposure lamp is on, or it becomes higher than 1.0 volt (rms) for
1.0 second when the exposure lamp is off.
FT 3513/3713
E# 53 : Fusing Overheat
The temperature detected by the thermistor becomes higher than 230C.
E# 54 : Fusing Error
The temperature detected by the thermistor does not rise more than 20C
within 12 seconds when the fusing lamp is turned on continuously in the
main motor off condition.