Escolar Documentos
Profissional Documentos
Cultura Documentos
Perform Job Safety Analysis based on the picture below. JSA perform must be
presented in table form and submitted to me TOMORROW (21 APRIL 2016)
before 5pm.
STEPS FOR
1. LIFTING HEAVY LOAD
POTENTIAL HAZARDS
slipped
Strained back
RECOMMENDATION
Provide better
suited shoes or
ppe.
Clear any hazard
substance in close
vicinity.
Provide forklift for
work relating to
heavy lifting.
STEPS FOR
2.WELDING
POTENTIAL HAZARDS
RECOMMENDATION
Use mechanical
hoist or get
assistance from coworker to set-up/
adjust workpiece.
Wear recommended
footwear. Ensure
workpiece is
securely clamped to
fixture.
Clean/clear work
area/surfaces of
unused
tools/materials.
Ensure power
supply is
disconnected before
installing.
Electric shock.
3.weld workpiece
4.complete weld
STEP FOR
3.GRINDING
Electrical shock/burn or
electrical contact with
conducting objects,
flammable liquids and/or
compressed gas cylinders
due to energized electrode
rod holder
POTENTIAL HAZARD
RECOMMENDATION
1.Take casting.
Ensure proper
gloves are on at all
time.
Provide larger
guard over grind
wheel.
3.put casting in
container.
STEP FOR
4.INSTALLING
FLOURECENT LIGHTS.
1.Place a climbing
instrument under light
fixture.(i.e ladder)
POTENTIAL HAZARD
Ensure proper
gloves are on at all
time.
Better and safe
container for
placing grinded
casting.
RECOMMENDATION
fall
Dropped the light bulb
Debris in eye
Electrical shock
fall
Fall
strained
Fall
strained
STEP FOR
5.HANDLING HIGH
PRESSURE AIR.
1.Connect tube to
drill/screw gun/bolt
driver/etc
POTENTIAL HAZARD
3-point contact to
ladder at all time.
3-point contact to
ladder at all time.
RECOMMENDATION
Provide ladder.
Inspect ladder for
any defects.
Provide tool belt to
better secure
tools.
3-point contact to
ladder at all time.
Ensure power is of
Provide safety
glass
3-point contact to
ladder at all time.
Debris in eye
Safety glass
laceration
Provide gloves
Ensure airflow is
of.