Escolar Documentos
Profissional Documentos
Cultura Documentos
Drilling rig
LB 24
Kelly rope
Kelly bar
Inclination device
Casing driver
Auxiliary winch
Kelly winch
Crowd winch
Casing oscillator
Radius
adjustment device
Undercarriage
LB 24
Uppercarriage
21845
300
3400
3000
1120
800
9425
5630
6790
3390
Leader length
19.41 m
54.1 t
21845
2460
2585
2375
8070
Transport leader
Leader length
19.41 m
18.7 t
Weight complete
Lower part of the leader
1.2 t
3.0 t
2070
3000
7180
1565
2980
800
5630
1470
300
3400
1120
530
3390
1810
35.4 t
Counterweight
Rotary
Weight
Transport weight
10.2 t
BA 240
6.2 t
LB 24
Dimensions
Basic machine LB 24
15
22845
578
1100
3650
4900
800
3580
5630
37
00
Technical data
Total height
Max. pull, leader on ground
Max. torque
Stepless leader inclination
Lateral inclination
Forward inclination
Backward inclination
LB 24
4400
Operating weight
22.85 m
320 kN
252 kNm
8
5
15
Total weight
Technical description
Engine
Control
Power rating according to ISO 9249, 270 kW (362 hp) at 2000 rpm
Engine type
Liebherr D 936 L A6
Fuel tank
700 l capacity with continuous level
indicator and reserve warning
Engine complies with NRMM exhaust certification EPA/CARB Tier 3
and 97/68 EC Stage III A.
Hydraulic system
The main pumps are operated by a distributor gearbox. Axial piston
displacement pumps work in open circuits supplying oil only when
needed (flow control on demand). The hydraulic pressure peaks are
absorbed by the integrated automatic pressure compensation, which
relieves the pump and saves fuel.
Pumps for working tools
Separate pump for kinematics
Hydraulic oil tank
Max. working pressure
2x 240 l/min
137 l/min
600 l
350 bar
200 kN
28 mm
0-79 m/min
Auxiliary winch
Line pull (effective)
Rope diameter
Line speed
Crawlers
80 kN
20 mm
0-71 m/min
0 1.1 km/h
634 kN
800 mm
3390 mm
700 mm
3000 mm
900 mm
3490 mm
320/320 kN
160 kN
24 mm
16 m
0-76 m/min
Swing
Consists of triple-row roller bearing with external teeth and one swing
drive, fixed axial piston hydraulic motors, spring loaded and
hydraulically released multi-disc holding brake, planetary gearbox and
pinion. Selector for 3 speed ranges to increase swing precision.
Swing speed from 0 3.5 rpm is continuously variable.
Noise emission
Noise emissions correspond with 2000/14/EC directive on noise
emission by equipment used outdoors.
LB 24
Gearbox frame
Drive motors
Kelly bar
Shock absorber
Gearbox
Cardanic joint
Casing driver
BA240
Torque [kNm]
300
250
200
150
100
50
0
Gear 1
Gear 2
LB 24
Kelly shock absorber and rubber bearing relieve the material and
reduce noise emission
Thanks to the Kelly shock absorber the Kelly bar is guided
at greater length
10
20
30
Speed [rpm]
40
50
60
Kelly drilling
1900
Kelly bars
Technical data
Drilling drive - torque
Drilling drive - speed
Drilling drive - torque
Drilling drive - speed
1 gear
1st gear
2nd gear
2nd gear
st
252
28
126
57
kNm
rpm
kNm
rpm
Performance data
Max. drilling diameter*
Max. drilling diameter*
*) Other drilling diameters available on request.
1900 mm uncased
1500 mm cased
Drilling
depth
Weight
Kelly
(mm)
(mm)
(m)
(t)
(mm)
8600
22.0
5.0
419
MD 28/3/24
9880
MD 28/3/27
10880
7600
25.0
5.45
419
MD 28/3/30
11880
6600
28.0
5.9
419
MD 28/3/33
12880
5600
31.0
6.35
419
MD 28/3/36
13880
4600
34.0
6.8
419
MD 28/4/36
11450
7000
34.0
7.25
419
MD 28/4/42
12950
5500
40.0
8.1
419
LB 24
Technical data
Drilling drive - torque
Drilling drive - speed
Drilling drive - torque
Drilling drive - speed
Performance data
1st gear
1st gear
2nd gear
2nd gear
252
28
126
57
kNm
rpm
kNm
rpm
14.5 m
15.4 m
21.4 m
720 kN
150 kN
LB 24
1000 mm
Technical data
Drilling drive I - torque
Drilling drive I - speed
Drilling drive I - torque
Drilling drive I - speed
Drilling drive II - torque
Drilling drive II - speed
Drilling drive II - torque
Drilling drive II - speed
1st gear
1st gear
2nd gear
2nd gear
1st gear
1st gear
2nd gear
2nd gear
83
14
41
28
62
19
31
38
kNm
rpm
kNm
rpm
kNm
rpm
kNm
rpm
620 mm
15.4 m
720 kN
LB 24
Technical data
Drilling drive - torque
Drilling drive - speed
Drilling drive - torque
Drilling drive - speed
1st gear
1st gear
2st gear
2st gear
35
38
17.5
76
kNm
rpm
kNm
rpm
15.4 m
700 mm
10
LB 24
The Liebherr process data recording system PDE constantly records the relevant process data
during the working process.
59%
pile number
10%
12A/23
60cm
3.5 m
3.78 m
4.0 m
4.5 m
5.0 m
5.5 m
70
60
50
40
30
10
45 bar
CompactFlash
memory card
Standard
Optional
PC provided
by the customer
PDE
ABC
External sensors
Depending on the application the recorded and processed data are displayed on the PDE touchscreen in the operators cab, e.g. in the form
of an online cast-in-place pile.
At the same time the PDE is operated using this touchscreen. The operator can enter various details (e.g. jobsite name, pile number, etc.)
and start and stop recordings. A recording of every start-stop cycle carried out in the PDE is established on a CompactFlash memory card.
The PDE can be configured in a number of ways, e.g. for the connection of external sensors, for the generation of a simple protocol as graphic file and/or for a printout directly in the operators cab.
(additional equipment)
Comprehensive data evaluation and generation of reports on a PC is possible using the software
SCULI PDR.
Recordings management - The recordings generated by the PDE system can be imported and managed
in SCULI PDR. The data can be imported directly from the CompactFlash card or via the Liebherr telematics
system LiDAT. Certain recordings, e.g. for a particular day or jobsite, can be found using filter functions.
Viewing data - The data in each record is displayed tabularly. Combining several recordings provides
results, for example, regarding the total concrete consumption or the average depth. Furthermore, a diagram
editor is available for quick analysis.
CFA Drilling
job site:
machine ID:
motorway
1155xx
start date:
start time:
stop time:
duration:
05.11.2008
12:16:48
12:48:48
00:32:00
pile number:
maximum depth:
total concrete vol.:
concrete volume pile:
overconsumption:
maximum incline:
E02
2227 cm
15,123 m
14,531 m
29,8 %
0,4
Generating reports - A vital element of SCULI PDR is the report generator, which allows for the generation
of individual reports. These can be printed out directly or stored as pdf files. In the process the size, colour,
line thickness or even the desired logo can be configured. Moreover, the reports can be displayed in different languages, e.g. in English and in the national language.
LB 24
11