Escolar Documentos
Profissional Documentos
Cultura Documentos
DESCRIPTION: This error occurs when the CAMERA self-checking system processing time has
exceeded the specified limit. This error can occur when several switches are pressed at the same
time.
REMEDIAL MEASURE: Because this error is caused by abnormal operation, try releasing the error
by turning the main power switch OFF and then back ON.
ERR 22: CF DRIVER
DESCRIPTION: This error occurs when image data cannot be written to the CF card. This error can
occur when the CF card is not fully seated in the camera or if the D30 does not detect a card-ready
signal within a specified time limit or when the CF card is not usable because it has been corrupted
or physically damaged. It can also occur when the camera's battery level is insufficient to completely
write the file to the CF card.
REMEDIAL MEASURE: Use the DC Coupler or recharge the battery first. If the error continues to
occur with sufficient power available to the camera, check that the CF card is properly inserted. If
that's not the problem, then try replacing the CF card. If that does not solve the problem, have the
CAMERA and one of the CF cards that is causing the problem examined by a qualified service
technician.
ERR 23: NO SPACE LEFT ON THE CF CARD
DESCRIPTION: This error occurs when the CF card's free space is insufficient for the image file that
has been created. For example, when using a nearly full CF card, if a long exposure is made with
noise reduction shut off, the file size may become larger than average, resulting in insufficient space
to write the file.
REMEDIAL MEASURE: Use a CF card with sufficient free space.
ERR 50: CF FORMAT
DESCRIPTION: This error occurs when the CF card cannot be formatted in the camera.
REMEDIAL MEASURE: Replace the CF card.
ERR 51: PLAY MODE
DESCRIPTION: This error occurs when the images stored on the CF card cannot be played back in
the camera.
REMEDIAL MEASURE: Replace the CF card.
ERR 80: SHUTTER
DESCRIPTION: This error occurs in the following conditions.
When the CAMERA self-check system detects that the shutter has not been fully charged (ready
to shoot).
When the CAMERA self-check system detects that the shutter operation sequence has not been
completed correctly.
When the built-in flash cannot be recharged after the E-TTL preflash but before the main
exposure.
REMEDIAL MEASURE: Try clearing the error by turning the main power switch OFF and then back
ON.
ERR 81: MIRROR
DESCRIPTION: This error occurs in the following conditions.
When the CAMERA shutter release is pressed to the halfway position and the mirror-down status
cannot be verified by the CAMERA self-checking system.
When mirror up/down status cannot be detected during shutter release.
REMEDIAL MEASURE: Have the CAMERA examined by a qualified service technician.
ERR 82: STROBE
DESCRIPTION: This error occurs when the built-in flash cannot be charged.
REMEDIAL MEASURE: Try clearing the error by turning the main power switch OFF and then back
ON.
ERR 83: POP UP
DESCRIPTION: This error occurs when the built-in flash's pop-up operation cannot be detected even