Escolar Documentos
Profissional Documentos
Cultura Documentos
The word greenhouse is associated to the property of the gas to absorb infrared
radiation.
As per the basic law of thermodynamics the wavelength of radiation emitted by the body
depends upon the temp of the body and hence most of the INSOLATION ( incoming solar
radiation) from the sun passes through the earths atmosphere and most of this radiation
received from the sun is in visible spectrum (Ozone absorbs most of the radiation in the
UV spectrum). As the energy is received from the sun the earth starts to heat up and
other process driven by the energy of the sun happen on the earth . The earth in order to
maintain its temperature also has to give out the excess energy ( otherwise the earth in
its long and continuous exposure to the sun would simply melt away!!!!!)
The earth being at much lower temperature from the sun emits this radiation mainly in
the infrared spectrum.
And it this IR radiation which some gases absorb in the atmosphere and result in the so
called greenhouse effect. Hence these gases are called greenhouse gasses.
Each gas's effect on climate change depends on three main factors:
How much of these gases are in the atmosphere?
Concentration, or abundance, is the amount of a particular gas in the air. Larger
emissions of greenhouse gases lead to higher concentrations in the atmosphere.
Greenhouse gas concentrations are measured in parts per million, parts per billion, and
even parts per trillion. One part per million is equivalent to one drop of water diluted into
about 13 gallons of liquid (roughly the fuel tank of a compact car).
How long do they stay in the atmosphere?
Each of these gases can remain in the atmosphere for different amounts of time, ranging
from a few years to thousands of years. All of these gases remain in the
atmosphere long enough to become well mixed, meaning that the amount that
is measured in the atmosphere is roughly the same all over the world,
regardless of the source of the emissions.
How strongly do they impact global temperatures?
Some gases are more effective than others at making the planet warmer and "thickening
the Earth's blanket."
For each greenhouse gases, a Global Warming Potential (GWP) has been calculated to
reflect how long it remains in the atmosphere, on average, and how strongly it absorbs
energy. Gases with a higher GWP absorb more energy, per pound, than gases with a
lower GWP, and thus contribute more to warming Earth.
Chemical Formula
CO2
Lifetime in
Atmosphere
50-200
years
Global Warming
Potential (100-year)
Carbon dioxide (CO2) is the primary greenhouse gas emitted through human
activities. Carbon dioxide is naturally present in the atmosphere as part of the
Earth's carbon cycle (the natural circulation of carbon among the atmosphere,
oceans, soil, plants, and animals). Human activities are altering the carbon cycle-both by adding more CO2 to the atmosphere and by influencing the ability of
natural sinks, like forests, to remove CO2 from the atmosphere. While
CO2 emissions come from a variety of natural sources, human-related emissions
are responsible for the increase that has occurred in the atmosphere since the
industrial revolution.
Properties of Methane
Chemical Formula
CH4
Lifetime in
Atmosphere
12 years
Global Warming
Potential (100-year)
21
Chemical Formula
N2O
Lifetime in
Atmosphere
120 years
Global Warming
310
Potential (100-year)
Concentrations of N2O have risen approximately 18% since the start of the Industrial
Revolution, with a relatively rapid increase towards the end of the 20th century.
Properties of F-gases
Chemical
Formula
HFCs, PFCs,
SF6
Lifetime in
Atmosphere
HFCs: 1-270
years
PFCs: 80050,000 years
SF6: 3,200 years
Global
Warming
Potential (100year)
HFCs: 14011,700
PFCs: 6,5009,200
SF6: 23,900
Unlike many other greenhouse gases, fluorinated gases have no natural sources and only
come from human-related activities. Like other long-lived greenhouse gases, fluorinated
gases are well-mixed in the atmosphere, spreading around the world after they're
emitted. Fluorinated gases are removed from the atmosphere only when they are
destroyed by sunlight in the far upper atmosphere. In general, fluorinated gases are the
most potent and longest lasting type of greenhouse gases emitted by human activities.
According to the Second IMO GHG ( Green house Gas )Study 2009, which is the most
comprehensive and authoritative assessment of the level of GHG emitted by ships, international
shipping was estimated to have emitted 870 million tonnes, or about 2.7% of the global manmade emissions of CO2 in 2007. Exhaust gases are the primary source of GHG emissions from
ships and carbon dioxide is the most important GHG, both in terms of quantity and of global
warming potential.
The Study identifies a significant potential for reduction of GHG emissions through technical and
operational measures. The Study estimates that, if implemented, these measures could increase
efficiency and reduce the emissions rate by 25% to 75% below the current level.
IMOs Marine Environment Protection Committee (MEPC) has given extensive consideration to
control of GHG emissions from ships and finalized in July 2009 a package of specific technical
and operational reduction measures. In March 2010 MEPC started the consideration of making
the technical and operational measures mandatory for all ships irrespective of flag and
ownership. This work was completed in July 2011 with the breakthrough adoption of technical
measures for new ships and operational reduction measures for all ships, which are,
consequently, the first ever mandatory global GHG reduction regime for an entire industry
sector. The adopted measures add to MARPOL Annex VI a new
Chapter 4 entitled Regulations on energy efficiency for ships, making mandatory the Energy
Efficiency Design Index (EEDI) for new ships and the Ship Energy Efficiency Plan (SEEMP) for
all ships. The regulations apply to all ships over
400 gross tonnage and above and are expected to enter into force through the tacit acceptance
procedure on 1 January 2013.
smaller the EEDI the more energy efficient ship design) and is calculated by a formula based on
the technical design parameters for a given ship.
The CO2 reduction level (grams of CO2 per tonne mile) for the first phase is set to 10% and will
be tightened every five years to keep pace with technological developments of new efficiency
and reduction measures. Reduction rates have been established until the period 2025 to 2030
when a 30% reduction is mandated for applicable ship types calculated from a reference line
representing the average efficiency for ships built between 2000 and 2010. The EEDI is
developed for the largest and most energy intensive segments of the world merchant fleet and
will embrace 72% of emissions from new ships covering the following ship types: oil tankers, bulk
carriers, gas carriers, general cargo, container ships, refrigerated cargo and combination
carriers. For ship types not covered by the current formula, suitable formulas are expected to be
developed in the future addressing the largest emitters first.
4. Guidelines for calculation of reference lines for use with the Energy Efficiency Design
Index (EEDI), resolution MEPC.215(63).
Finalization and adoption of the supporting guidelines was a significant achievement which
provides sufficient lead time for Administrations and industry to prepare. The guidelines will
support Member States in their uniform implementation of the new chapter 4 of MARPOL Annex
VI Regulations for the prevention of air pollution from ships.