Escolar Documentos
Profissional Documentos
Cultura Documentos
1.
Product name
Label No.
Supplier/Manufacturer
Emergency telephone
number
Area of application
Material uses
2.
Hazards identification
: R10
Xn; R20/21
Xi; R38
Risk phrases
: R10- Flammable.
R20/21- Harmful by inhalation and in contact with skin.
R38- Irritating to skin.
Safety phrases
Statement of
: HAZARDOUS SUBSTANCE. DANGEROUS GOODS.
hazardous/dangerous nature
3.
Composition/information on ingredients
: Yes.
Mixture
Ingredient name
CAS number
% by weight
xylene
1330-20-7
10 - 25
ethylbenzene
100-41-4
2.5 - 10
3,6-diazaoctanethylenediamin
112-24-3
0-1
Classification
R10
Xn; R20/21
Xi; R38
F; R11
Xn; R20
Xn; R21/22
C; R34
R43
R52/53
Other ingredients, determined not to be hazardous according to Safe Work Australia criteria, and not dangerous
according to the ADG Code, make up the product concentration to 100%.
Date of issue
: 09.08.2013.
Page: 1/7
4.
First-aid measures
First-aid measures
Eye contact
: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention.
Skin contact
: Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Wash contaminated clothing thoroughly with water before removing it, or wear
gloves. Continue to rinse for at least 10 minutes. Get medical attention. Wash
clothing before reuse. Clean shoes thoroughly before reuse.
Inhalation
: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
it is suspected that fumes are still present, the rescuer should wear an appropriate
mask or self-contained breathing apparatus. If not breathing, if breathing is irregular
or if respiratory arrest occurs, provide artificial respiration or oxygen by trained
personnel. It may be dangerous to the person providing aid to give mouth-to-mouth
resuscitation. Get medical attention. If unconscious, place in recovery position and
get medical attention immediately. Maintain an open airway. Loosen tight clothing
such as a collar, tie, belt or waistband. In case of inhalation of decomposition
products in a fire, symptoms may be delayed. The exposed person may need to be
kept under medical surveillance for 48 hours.
Ingestion
: Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and
keep at rest in a position comfortable for breathing. If material has been swallowed
and the exposed person is conscious, give small quantities of water to drink. Stop if
the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting
unless directed to do so by medical personnel. If vomiting occurs, the head should be
kept low so that vomit does not enter the lungs. Get medical attention if adverse
health effects persist or are severe. Never give anything by mouth to an unconscious
person. If unconscious, place in recovery position and get medical attention
immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt
or waistband.
Protection of first-aiders
: No action shall be taken involving any personal risk or without suitable training. It may
be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
5.
Fire-fighting measures
Extinguishing media
Suitable
Not suitable
Special exposure hazards
Special protective
equipment for fire-fighters
Hazchem code
: 3Y
6.
Personal precautions
: No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Shut off all ignition sources. No
flares, smoking or flames in hazard area. Avoid breathing vapour or mist. Provide
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put
on appropriate personal protective equipment (see Section 8).
Environmental precautions
: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Date of issue
: 09.08.2013.
Page: 2/7
: Stop leak if without risk. Move containers from spill area. Approach the release from
upwind. Prevent entry into sewers, water courses, basements or confined areas.
Wash spillages into an effluent treatment plant or proceed as follows. Contain and
collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite
or diatomaceous earth and place in container for disposal according to local
regulations (see section 13). Use spark-proof tools and explosion-proof equipment.
Dispose of via a licensed waste disposal contractor. Contaminated absorbent
material may pose the same hazard as the spilt product. Note: see section 1 for
emergency contact information and section 13 for waste disposal.
Contain and collect spillage with an electrically protected vacuum cleaner or by wetbrushing and place in container for disposal according to local regulations (see
section 13).
7.
Handling
The handle provided on the package is for manual handling only. Transport and
transfer should be carried out with appropriate equipment and carriage devices.
: Store in accordance with local regulations. Store in a segregated and approved area.
Store in original container protected from direct sunlight in a dry, cool and wellventilated area, away from incompatible materials (see section 10) and food and
drink. Eliminate all ignition sources. Separate from oxidizing materials. Keep
container tightly closed and sealed until ready for use. Containers that have been
opened must be carefully resealed and kept upright to prevent leakage. Do not store
in unlabelled containers. Use appropriate containment to avoid environmental
contamination.
Storage
8.
Ingredient name
xylene
ethylbenzene
Exposure limits
Safe Work Australia (Australia, 8/2005).
STEL: 655 mg/m 15 minute(s).
STEL: 150 ppm 15 minute(s).
TWA: 350 mg/m 8 hour(s).
TWA: 80 ppm 8 hour(s).
Safe Work Australia (Australia, 8/2005).
STEL: 543 mg/m 15 minute(s).
STEL: 125 ppm 15 minute(s).
TWA: 434 mg/m 8 hour(s).
TWA: 100 ppm 8 hour(s).
Recommended monitoring
procedures
Engineering measures
: Use only with adequate ventilation. Use process enclosures, local exhaust ventilation
or other engineering controls to keep worker exposure to airborne contaminants
below any recommended or statutory limits. The engineering controls also need to
keep gas, vapour or dust concentrations below any lower explosive limits. Use
explosion-proof ventilation equipment.
Hygiene measures
: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Date of issue
: 09.08.2013.
Page: 3/7
: Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts.
Hands
Respiratory
Skin
: Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist before
handling this product.
Environmental exposure
controls
9.
Physical state
Colour
Odour
Density
Flash point
Solubility
:
:
:
:
:
Various colours.
Characteristic.
0.9 g/cm3
Closed cup: 27C (80,6F)
Insoluble in the following materials: cold water and hot water.
: Stable under recommended storage and handling conditions (see section 7).
Hazardous decomposition products: carbon monoxide, carbon dioxide, smoke, oxides
of nitrogen.
Keep away from the following materials to prevent strong exothermic reactions:
oxidising agents, strong alkalis, strong acids.
Hazardous decomposition
products
Materials to avoid/
Hazardous Reactions
Conditions to avoid
11 . Toxicological information
There are no data available on the preparation itself. The preparation has been assessed following the conventional method
of the Dangerous Preparations Directive 1999/45/EC and classified for toxicological hazards accordingly. See sections 2 and
15 for details.
Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result in
adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the kidneys, liver
and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular weakness, drowsiness and,
in extreme cases, loss of consciousness.
Solvents may cause some of the above effects by absorption through the skin. Repeated or prolonged contact with the
preparation may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption through
the skin.
If splashed in the eyes, the liquid may cause irritation and reversible damage.
Ingestion may cause nausea, diarrhea and vomiting.
This takes into account, where known, delayed and immediate effects and also chronic effects of components from shortterm and long-term exposure by oral, inhalation and dermal routes of exposure and eye contact.
Contains 3,6-diazaoctanethylenediamin. May produce an allergic reaction.
Date of issue
: 09.08.2013.
Page: 4/7
A4
A3
3
3
2B
12 . Ecological information
There are no data available on the preparation itself.
Do not allow to enter drains or watercourses.
The preparation has been assessed following the conventional method of the Dangerous Preparations Directive
1999/45/EC and is not classified as dangerous for the environment but contains a substance or substances dangerous
for the environment. See section 2 for details.
Ecotoxicity
Aquatic ecotoxicity
Product/ingredient name
Result
Species
Exposure
ethylbenzene
Algae
Daphnia
Fish
Daphnia - Daphnia magna
48 hours
48 hours
96 hours
48 hours
3,6diazaoctanethylenediamin
Conclusion/Summary
: Not available.
Other ecological information
Persistence/degradability
Conclusion/Summary
: Not available.
Product/ingredient name
Aquatic half-life
Photolysis
Biodegradability
xylene
ethylbenzene
3,6diazaoctanethylenediamin
Readily
Readily
Not readily
Product/ingredient name
LogPow
BCF
xylene
3,6diazaoctanethylenediamin
3,12
-1.66 to -1.4
Bioaccumulative potential
Date of issue
: 09.08.2013.
Potential
high
low
Page: 5/7
13 . Disposal considerations
Methods of disposal
14 . Transport information
Transport within users premises: always transport in closed containers that are upright and secure. Ensure that
persons transporting the product know what to do in the event of an accident or spillage.
International transport regulations
Proper shipping name
: Paint
UN Number
: 1263
Class
: 3
Packing group
: III
Label
:
Additional information
ADG Proper shipping name : Paint
:
ADG Label
: 3Y
: Tunnel restriction code: (D/E)
Hazard identification number: 30
Special provisions: 640E
ADR/RID: Viscous substance. Not restricted, ref. chapter 2.2.3.1.5 (applicable to
receptacles < 450 litre capacity).
: Emergency schedules (EmS): F-E, S-E
Marine pollutant: No.
IMDG
15 . Regulatory information
National regulations
Standard for the Uniform Scheduling of Drugs and Poisons
5
Control of Scheduled Carcinogenic Substances
Ingredient name
No listed substance
Australia inventory (AICS)
EU regulations
Date of issue
: 09.08.2013.
Schedule
Page: 6/7
Harmful
Contains
Risk phrases
: xylene
: R10- Flammable.
R20/21- Harmful by inhalation and in contact with skin.
R38- Irritating to skin.
Safety phrases
Additional warning
phrases
US regulations
HCS Classification
: Flammable liquid
Carcinogen
16 . Other information
Full text of R-phrases referred : R11- Highly flammable.
R10- Flammable.
to in sections 2 and 3
R20- Harmful by inhalation.
R20/21- Harmful by inhalation and in contact with skin.
R21/22- Harmful in contact with skin and if swallowed.
R34- Causes burns.
R38- Irritating to skin.
R43- May cause sensitisation by skin contact.
R52/53- Harmful to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
Notice to reader
History
Date of printing
:
:
:
:
Date of issue
Version
Prepared by
09.08.2013.
09.08.2013.
3.01
Jotun Group Product Safety Department
Disclaimer
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier,
nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information
contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown
hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that
these are the only hazards that exist.
Date of issue
: 09.08.2013.
Page: 7/7