Escolar Documentos
Profissional Documentos
Cultura Documentos
Web: www.scanmatic.se
FUNCTION
From a conveying belt, slide plate or for example a lifting table the sack is pushed on to
the internal conveying belt in the machine.
This internal conveying belt which is totally enclosed and mounted to the machine
transports the bag into the machine through a cutting aggregate that cuts the bag open on
both sides.
The cut up bag with material falls into the spinning grid drum where the bag is emptied.
The size of mesh depends of the material to be emptied. Standard size of mesh is 30 x
30mm.
The material passes through the net down to a conical trough with an outlet flange where
further transport equipment takes over.
The emptied bag is carried by the rotated drum to the end of it and there it falls down
into a shaft. The compactor SSK5 is a additional equipment and fits onto the shaft.
Equipment and performance
Capacity: Min 100 bags/h and up to 400 bags/h, depending of the type of bag, material
goods characteristics and the length of the drum in the machine.
Example of capacity
250 20kg cement bag per hour
300 20kg cement bag per hour
350 20kg cement bag per hour
Additional equipment:
1.
2.
3.
4.
5.
6.
Web: www.scanmatic.se
BAG EMPTIERS
ONE-BAG SLITTER
SSM2-1
TS01-001
Web: www.scanmatic.se
ONE-BAG SLITTER
SSM2-1
TS01-001
Function
The One bag emptier is a simple manual bag emptier machine. In basic design the machine has
following function.
The operator places the bag on the grate table. Then he pushes the table into the machine and the
bag is cut open by a knife on the underside.
With both hands he grip the bag halves and shake them empty.
When the bag is emptied he can withdraw the table and put away the emptied bag.
Accessories
To handle dusting or in other ways dangerous material it is important to close the system as much as
possible.
Following accessories is available:
- Filter unit 4 m2 or 7 m2 with fan to place directly on the top of the machine.
- Sound damper for the filter unit.
- Connection case on the bag emptier machine to directly connection of our bag compactor
SSK 4.
- Lifting table and other arrangements to minimum lifting bags.
Web: www.scanmatic.se
BAG SLITTER
SSM3-100
TS04-002
Web: www.scanmatic.se
BAG SLITTER
SSM3-100
TS04-002
Function
From a conveying belt, slide plate or for example lifting table the sack is pushed in to the machines
internal conveying belt.
This internal conveying belt that is totally enclosed and assembled in the machine transports the sack
in the machine over a double cutting aggregate that cuts the sack effective on the top and bottom
side.
The slotted sack with material falls in to the spinning grinded drum where the sack is emptying. The
mesh nets size is depended on the material to be emptied. Standard mesh net is 30 x 30 mm.
The material passes through the net down to a conical trough whit an out let flange where future
transport equipment takes over.
The emptied sack in the rotated drum falls down to a shaft and possibly in to the compactor, SSK5,
which is additional equipment.
Web: www.scanmatic.se
BAG SLITTER
SSM3-100
TS04-002
Wastage
The goods waste is depending on type of sack and goods characteristics. The eventual wastage is
following the sack down the shaft. Example: 20kg cement, 0.1-1 mm/particle in paper sack gives less
than 0.2% wastage.
Surface finish
Painting program according to Scanmatic standard TS-7000 It can also be delivered in stainless steel
or other customers demands.
Electrical connection
400 V, 50 Hz, IP 56, 16 A Additional components as lifting table, filter, feeding belt conveyor etc.
(components that is bulky for transportation) assemblies by electrician in place.
Air connection
8mm instrumental air hose
Emptying time
Emptying time is that time the sack is placed in the drum. This time is varying depend on the material
and type of sack. By delivery the machine is adjusted to maximum emptying time. To accomplish
shorter emptying time one have to dismantle the pointed axel which is screwed on the inside of the
drum. The feeding time has to be adjusted to the emptying time.
Web: www.scanmatic.se
500
1428
900
800
1380
Side view
Web: www.scanmatic.se
Top view
FUNCTION
The Big Bag Emptier is an emptier where the big bag by means of suitable lifting equipment is
lowered down over the emptier and thereby the bag will be cut up in the bottom by pointed knives.
On the upper side there is a rubber cuff, which is shaped in accordance with the bag and therefore
gives a dust-tight connection.
Standard of equipment
Optional equipment
Special
The Big Bag emptier can also be manufactured for other dimensions of the big bag, other outlet
connection and in other materials e.g. stainless steel.
Web: www.scanmatic.se
LIFTING YOKE
TS04-004
Lifting yoke
Lifting yoke for lifting with hoist or overhead crane
290
10 0
1230
Web: www.scanmatic.se
VACUUM LIFT
VM180
TS13-006
Web: www.scanmatic.se